linux.git/net/wireless, branch v6.10-rc6

wifi: cfg80211: wext: add extra SIOCSIWSCAN data check

2024-06-12T08:07:56+00:00

In 'cfg80211_wext_siwscan()', add extra check whether number of
channels passed via 'ioctl(sock, SIOCSIWSCAN, ...)' doesn't exceed
IW_MAX_FREQUENCIES and reject invalid request with -EINVAL otherwise.

Reported-by: syzbot+253cd2d2491df77c93ac@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=253cd2d2491df77c93ac
Signed-off-by: Dmitry Antipov 
Link: https://msgid.link/20240531032010.451295-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg

wifi: cfg80211: wext: set ssids=NULL for passive scans

2024-06-12T08:06:58+00:00

In nl80211, we always set the ssids of a scan request to
NULL when n_ssids==0 (passive scan). Drivers have relied
on this behaviour in the past, so we fixed it in 6 GHz
scan requests as well, and added a warning so we'd have
assurance the API would always be called that way.

syzbot found that wext doesn't ensure that, so we reach
the check and trigger the warning. Fix the wext code to
set the ssids pointer to NULL when there are none.

Reported-by: syzbot+cd6135193ba6bb9ad158@syzkaller.appspotmail.com
Fixes: f7a8b10bfd61 ("wifi: cfg80211: fix 6 GHz scan request building")
Signed-off-by: Johannes Berg

wifi: cfg80211: fix 6 GHz scan request building

2024-05-29T13:25:25+00:00

The 6 GHz scan request struct allocated by cfg80211_scan_6ghz() is
meant to be formed this way:

 [base struct][channels][ssids][6ghz_params]

It is allocated with [channels] as the maximum number of channels
supported by the driver in the 6 GHz band, since allocation is
before knowing how many there will be.

However, the inner pointers are set incorrectly: initially, the
6 GHz scan parameters pointer is set:

 [base struct][channels]
                        ^ scan_6ghz_params

and later the SSID pointer is set to the end of the actually
_used_ channels.

 [base struct][channels]
                  ^ ssids

If many APs were to be discovered, and many channels used, and
there were many SSIDs, then the SSIDs could overlap the 6 GHz
parameters.

Additionally, the request->ssids for most of the function points
to the original request still (given the struct copy) but is used
normally, which is confusing.

Clear this up, by actually using the allocated space for 6 GHz
parameters _after_ the SSIDs, and set up the SSIDs initially so
they are used more clearly. Just like in nl80211.c, set them
only if there actually are SSIDs though.

Finally, also copy the elements (ie/ie_len) so they're part of
the same request, not pointing to the old request.

Co-developed-by: Miri Korenblit 
Signed-off-by: Miri Korenblit 
Reviewed-by: Ilan Peer 
Signed-off-by: Johannes Berg 
Link: https://msgid.link/20240510113738.4190692ef4ee.I0cb19188be17a8abd029805e3373c0a7777c214c@changeid
Signed-off-by: Johannes Berg

wifi: cfg80211: pmsr: use correct nla_get_uX functions

2024-05-29T13:23:54+00:00

The commit 9bb7e0f24e7e ("cfg80211: add peer measurement with FTM
initiator API") defines four attributes NL80211_PMSR_FTM_REQ_ATTR_
{NUM_BURSTS_EXP}/{BURST_PERIOD}/{BURST_DURATION}/{FTMS_PER_BURST} in
following ways.

static const struct nla_policy
nl80211_pmsr_ftm_req_attr_policy[NL80211_PMSR_FTM_REQ_ATTR_MAX + 1] = {
    ...
    [NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP] =
        NLA_POLICY_MAX(NLA_U8, 15),
    [NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD] = { .type = NLA_U16 },
    [NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION] =
        NLA_POLICY_MAX(NLA_U8, 15),
    [NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST] =
        NLA_POLICY_MAX(NLA_U8, 31),
    ...
};

That is, those attributes are expected to be NLA_U8 and NLA_U16 types.
However, the consumers of these attributes in `pmsr_parse_ftm` blindly
all use `nla_get_u32`, which is incorrect and causes functionality issues
on little-endian platforms. Hence, fix them with the correct `nla_get_u8`
and `nla_get_u16` functions.

Fixes: 9bb7e0f24e7e ("cfg80211: add peer measurement with FTM initiator API")
Signed-off-by: Lin Ma 
Link: https://msgid.link/20240521075059.47999-1-linma@zju.edu.cn
Signed-off-by: Johannes Berg

wifi: cfg80211: Lock wiphy in cfg80211_get_station

2024-05-29T13:23:41+00:00

Wiphy should be locked before calling rdev_get_station() (see lockdep
assert in ieee80211_get_station()).

This fixes the following kernel NULL dereference:

 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050
 Mem abort info:
   ESR = 0x0000000096000006
   EC = 0x25: DABT (current EL), IL = 32 bits
   SET = 0, FnV = 0
   EA = 0, S1PTW = 0
   FSC = 0x06: level 2 translation fault
 Data abort info:
   ISV = 0, ISS = 0x00000006
   CM = 0, WnR = 0
 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000003001000
 [0000000000000050] pgd=0800000002dca003, p4d=0800000002dca003, pud=08000000028e9003, pmd=0000000000000000
 Internal error: Oops: 0000000096000006 [#1] SMP
 Modules linked in: netconsole dwc3_meson_g12a dwc3_of_simple dwc3 ip_gre gre ath10k_pci ath10k_core ath9k ath9k_common ath9k_hw ath
 CPU: 0 PID: 1091 Comm: kworker/u8:0 Not tainted 6.4.0-02144-g565f9a3a7911-dirty #705
 Hardware name: RPT (r1) (DT)
 Workqueue: bat_events batadv_v_elp_throughput_metric_update
 pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
 pc : ath10k_sta_statistics+0x10/0x2dc [ath10k_core]
 lr : sta_set_sinfo+0xcc/0xbd4
 sp : ffff000007b43ad0
 x29: ffff000007b43ad0 x28: ffff0000071fa900 x27: ffff00000294ca98
 x26: ffff000006830880 x25: ffff000006830880 x24: ffff00000294c000
 x23: 0000000000000001 x22: ffff000007b43c90 x21: ffff800008898acc
 x20: ffff00000294c6e8 x19: ffff000007b43c90 x18: 0000000000000000
 x17: 445946354d552d78 x16: 62661f7200000000 x15: 57464f445946354d
 x14: 0000000000000000 x13: 00000000000000e3 x12: d5f0acbcebea978e
 x11: 00000000000000e3 x10: 000000010048fe41 x9 : 0000000000000000
 x8 : ffff000007b43d90 x7 : 000000007a1e2125 x6 : 0000000000000000
 x5 : ffff0000024e0900 x4 : ffff800000a0250c x3 : ffff000007b43c90
 x2 : ffff00000294ca98 x1 : ffff000006831920 x0 : 0000000000000000
 Call trace:
  ath10k_sta_statistics+0x10/0x2dc [ath10k_core]
  sta_set_sinfo+0xcc/0xbd4
  ieee80211_get_station+0x2c/0x44
  cfg80211_get_station+0x80/0x154
  batadv_v_elp_get_throughput+0x138/0x1fc
  batadv_v_elp_throughput_metric_update+0x1c/0xa4
  process_one_work+0x1ec/0x414
  worker_thread+0x70/0x46c
  kthread+0xdc/0xe0
  ret_from_fork+0x10/0x20
 Code: a9bb7bfd 910003fd a90153f3 f9411c40 (f9402814)

This happens because STA has time to disconnect and reconnect before
batadv_v_elp_throughput_metric_update() delayed work gets scheduled. In
this situation, ath10k_sta_state() can be in the middle of resetting
arsta data when the work queue get chance to be scheduled and ends up
accessing it. Locking wiphy prevents that.

Fixes: 7406353d43c8 ("cfg80211: implement cfg80211_get_station cfg80211 API")
Signed-off-by: Remi Pommarel 
Reviewed-by: Nicolas Escande 
Acked-by: Antonio Quartulli 
Link: https://msgid.link/983b24a6a176e0800c01aedcd74480d9b551cb13.1716046653.git.repk@triplefau.lt
Signed-off-by: Johannes Berg

wifi: cfg80211: fully move wiphy work to unbound workqueue

2024-05-29T13:23:33+00:00

Previously I had moved the wiphy work to the unbound
system workqueue, but missed that when it restarts and
during resume it was still using the normal system
workqueue. Fix that.

Fixes: 91d20ab9d9ca ("wifi: cfg80211: use system_unbound_wq for wiphy work")
Reviewed-by: Miriam Rachel Korenblit 
Link: https://msgid.link/20240522124126.7ca959f2cbd3.I3e2a71ef445d167b84000ccf934ea245aef8d395@changeid
Signed-off-by: Johannes Berg

wifi: cfg80211: validate HE operation element parsing

2024-05-29T13:20:11+00:00

Validate that the HE operation element has the correct
length before parsing it.

Cc: stable@vger.kernel.org
Fixes: 645f3d85129d ("wifi: cfg80211: handle UHB AP and STA power type")
Reviewed-by: Miriam Rachel Korenblit 
Link: https://msgid.link/20240523120533.677025eb4a92.I44c091029ef113c294e8fe8b9bf871bf5dbeeb27@changeid
Signed-off-by: Johannes Berg

tracing/treewide: Remove second parameter of __assign_str()

2024-05-23T00:14:47+00:00

With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.

This means that with:

  __string(field, mystring)

Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.

There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:

  git grep -l __assign_str | while read a ; do
      sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
      mv /tmp/test-file $a;
  done

I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.

Note, the same updates will need to be done for:

  __assign_str_len()
  __assign_rel_str()
  __assign_rel_str_len()

I tested this with both an allmodconfig and an allyesconfig (build only for both).

[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/

Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home

Cc: Masami Hiramatsu 
Cc: Mathieu Desnoyers 
Cc: Linus Torvalds 
Cc: Julia Lawall 
Signed-off-by: Steven Rostedt (Google) 
Acked-by: Jani Nikula 
Acked-by: Christian König  for the amdgpu parts.
Acked-by: Thomas Hellström  #for
Acked-by: Rafael J. Wysocki  # for thermal
Acked-by: Takashi Iwai 
Acked-by: Darrick J. Wong 	# xfs
Tested-by: Guenter Roeck

Merge tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

2024-05-18T19:39:20+00:00

Pull Kbuild updates from Masahiro Yamada:

 - Avoid 'constexpr', which is a keyword in C23

 - Allow 'dtbs_check' and 'dt_compatible_check' run independently of
   'dt_binding_check'

 - Fix weak references to avoid GOT entries in position-independent code
   generation

 - Convert the last use of 'optional' property in arch/sh/Kconfig

 - Remove support for the 'optional' property in Kconfig

 - Remove support for Clang's ThinLTO caching, which does not work with
   the .incbin directive

 - Change the semantics of $(src) so it always points to the source
   directory, which fixes Makefile inconsistencies between upstream and
   downstream

 - Fix 'make tar-pkg' for RISC-V to produce a consistent package

 - Provide reasonable default coverage for objtool, sanitizers, and
   profilers

 - Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.

 - Remove the last use of tristate choice in drivers/rapidio/Kconfig

 - Various cleanups and fixes in Kconfig

* tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits)
  kconfig: use sym_get_choice_menu() in sym_check_prop()
  rapidio: remove choice for enumeration
  kconfig: lxdialog: remove initialization with A_NORMAL
  kconfig: m/nconf: merge two item_add_str() calls
  kconfig: m/nconf: remove dead code to display value of bool choice
  kconfig: m/nconf: remove dead code to display children of choice members
  kconfig: gconf: show checkbox for choice correctly
  kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal
  Makefile: remove redundant tool coverage variables
  kbuild: provide reasonable defaults for tool coverage
  modules: Drop the .export_symbol section from the final modules
  kconfig: use menu_list_for_each_sym() in sym_check_choice_deps()
  kconfig: use sym_get_choice_menu() in conf_write_defconfig()
  kconfig: add sym_get_choice_menu() helper
  kconfig: turn defaults and additional prompt for choice members into error
  kconfig: turn missing prompt for choice members into error
  kconfig: turn conf_choice() into void function
  kconfig: use linked list in sym_set_changed()
  kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED
  kconfig: gconf: remove debug code
  ...

kbuild: use $(src) instead of $(srctree)/$(src) for source directory

2024-05-09T19:34:52+00:00

Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for
checked-in source files. It is merely a convention without any functional
difference. In fact, $(obj) and $(src) are exactly the same, as defined
in scripts/Makefile.build:

    src := $(obj)

When the kernel is built in a separate output directory, $(src) does
not accurately reflect the source directory location. While Kbuild
resolves this discrepancy by specifying VPATH=$(srctree) to search for
source files, it does not cover all cases. For example, when adding a
header search path for local headers, -I$(srctree)/$(src) is typically
passed to the compiler.

This introduces inconsistency between upstream and downstream Makefiles
because $(src) is used instead of $(srctree)/$(src) for the latter.

To address this inconsistency, this commit changes the semantics of
$(src) so that it always points to the directory in the source tree.

Going forward, the variables used in Makefiles will have the following
meanings:

  $(obj)     - directory in the object tree
  $(src)     - directory in the source tree  (changed by this commit)
  $(objtree) - the top of the kernel object tree
  $(srctree) - the top of the kernel source tree

Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced
with $(src).

Signed-off-by: Masahiro Yamada 
Reviewed-by: Nicolas Schier