linux.git/net, branch v4.14.145

tipc: add NULL pointer check before calling kfree_rcu

2019-09-19T07:08:02+00:00

[ Upstream commit 42dec1dbe38239cf91cc1f4df7830c66276ced37 ]

Unlike kfree(p), kfree_rcu(p, rcu) won't do NULL pointer check. When
tipc_nametbl_remove_publ returns NULL, the panic below happens:

   BUG: unable to handle kernel NULL pointer dereference at 0000000000000068
   RIP: 0010:__call_rcu+0x1d/0x290
   Call Trace:
    
    tipc_publ_notify+0xa9/0x170 [tipc]
    tipc_node_write_unlock+0x8d/0x100 [tipc]
    tipc_node_link_down+0xae/0x1d0 [tipc]
    tipc_node_check_dest+0x3ea/0x8f0 [tipc]
    ? tipc_disc_rcv+0x2c7/0x430 [tipc]
    tipc_disc_rcv+0x2c7/0x430 [tipc]
    ? tipc_rcv+0x6bb/0xf20 [tipc]
    tipc_rcv+0x6bb/0xf20 [tipc]
    ? ip_route_input_slow+0x9cf/0xb10
    tipc_udp_recv+0x195/0x1e0 [tipc]
    ? tipc_udp_is_known_peer+0x80/0x80 [tipc]
    udp_queue_rcv_skb+0x180/0x460
    udp_unicast_rcv_skb.isra.56+0x75/0x90
    __udp4_lib_rcv+0x4ce/0xb90
    ip_local_deliver_finish+0x11c/0x210
    ip_local_deliver+0x6b/0xe0
    ? ip_rcv_finish+0xa9/0x410
    ip_rcv+0x273/0x362

Fixes: 97ede29e80ee ("tipc: convert name table read-write lock to RCU")
Reported-by: Li Shuang 
Signed-off-by: Xin Long 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tcp: fix tcp_ecn_withdraw_cwr() to clear TCP_ECN_QUEUE_CWR

2019-09-19T07:08:02+00:00

[ Upstream commit af38d07ed391b21f7405fa1f936ca9686787d6d2 ]

Fix tcp_ecn_withdraw_cwr() to clear the correct bit:
TCP_ECN_QUEUE_CWR.

Rationale: basically, TCP_ECN_DEMAND_CWR is a bit that is purely about
the behavior of data receivers, and deciding whether to reflect
incoming IP ECN CE marks as outgoing TCP th->ece marks. The
TCP_ECN_QUEUE_CWR bit is purely about the behavior of data senders,
and deciding whether to send CWR. The tcp_ecn_withdraw_cwr() function
is only called from tcp_undo_cwnd_reduction() by data senders during
an undo, so it should zero the sender-side state,
TCP_ECN_QUEUE_CWR. It does not make sense to stop the reflection of
incoming CE bits on incoming data packets just because outgoing
packets were spuriously retransmitted.

The bug has been reproduced with packetdrill to manifest in a scenario
with RFC3168 ECN, with an incoming data packet with CE bit set and
carrying a TCP timestamp value that causes cwnd undo. Before this fix,
the IP CE bit was ignored and not reflected in the TCP ECE header bit,
and sender sent a TCP CWR ('W') bit on the next outgoing data packet,
even though the cwnd reduction had been undone.  After this fix, the
sender properly reflects the CE bit and does not set the W bit.

Note: the bug actually predates 2005 git history; this Fixes footer is
chosen to be the oldest SHA1 I have tested (from Sep 2007) for which
the patch applies cleanly (since before this commit the code was in a
.h file).

Fixes: bdf1ee5d3bd3 ("[TCP]: Move code from tcp_ecn.h to tcp*.c and tcp.h & remove it")
Signed-off-by: Neal Cardwell 
Acked-by: Yuchung Cheng 
Acked-by: Soheil Hassas Yeganeh 
Cc: Eric Dumazet 
Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

sctp: use transport pf_retrans in sctp_do_8_2_transport_strike

2019-09-19T07:08:01+00:00

[ Upstream commit 10eb56c582c557c629271f1ee31e15e7a9b2558b ]

Transport should use its own pf_retrans to do the error_count
check, instead of asoc's. Otherwise, it's meaningless to make
pf_retrans per transport.

Fixes: 5aa93bcf66f4 ("sctp: Implement quick failover draft from tsvwg")
Signed-off-by: Xin Long 
Acked-by: Marcelo Ricardo Leitner 
Acked-by: Neil Horman 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

sctp: Fix the link time qualifier of 'sctp_ctrlsock_exit()'

2019-09-19T07:08:01+00:00

[ Upstream commit b456d72412ca8797234449c25815e82f4e1426c0 ]

The '.exit' functions from 'pernet_operations' structure should be marked
as __net_exit, not __net_init.

Fixes: 8e2d61e0aed2 ("sctp: fix race on protocol/netns initialization")
Signed-off-by: Christophe JAILLET 
Acked-by: Marcelo Ricardo Leitner 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

sch_hhf: ensure quantum and hhf_non_hh_weight are non-zero

2019-09-19T07:08:01+00:00

[ Upstream commit d4d6ec6dac07f263f06d847d6f732d6855522845 ]

In case of TCA_HHF_NON_HH_WEIGHT or TCA_HHF_QUANTUM is zero,
it would make no progress inside the loop in hhf_dequeue() thus
kernel would get stuck.

Fix this by checking this corner case in hhf_change().

Fixes: 10239edf86f1 ("net-qdisc-hhf: Heavy-Hitter Filter (HHF) qdisc")
Reported-by: syzbot+bc6297c11f19ee807dc2@syzkaller.appspotmail.com
Reported-by: syzbot+041483004a7f45f1f20a@syzkaller.appspotmail.com
Reported-by: syzbot+55be5f513bed37fc4367@syzkaller.appspotmail.com
Cc: Jamal Hadi Salim 
Cc: Jiri Pirko 
Cc: Terry Lam 
Signed-off-by: Cong Wang 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: gso: Fix skb_segment splat when splitting gso_size mangled skb having linear-headed frag_list

2019-09-19T07:08:01+00:00

[ Upstream commit 3dcbdb134f329842a38f0e6797191b885ab00a00 ]

Historically, support for frag_list packets entering skb_segment() was
limited to frag_list members terminating on exact same gso_size
boundaries. This is verified with a BUG_ON since commit 89319d3801d1
("net: Add frag_list support to skb_segment"), quote:

    As such we require all frag_list members terminate on exact MSS
    boundaries.  This is checked using BUG_ON.
    As there should only be one producer in the kernel of such packets,
    namely GRO, this requirement should not be difficult to maintain.

However, since commit 6578171a7ff0 ("bpf: add bpf_skb_change_proto helper"),
the "exact MSS boundaries" assumption no longer holds:
An eBPF program using bpf_skb_change_proto() DOES modify 'gso_size', but
leaves the frag_list members as originally merged by GRO with the
original 'gso_size'. Example of such programs are bpf-based NAT46 or
NAT64.

This lead to a kernel BUG_ON for flows involving:
 - GRO generating a frag_list skb
 - bpf program performing bpf_skb_change_proto() or bpf_skb_adjust_room()
 - skb_segment() of the skb

See example BUG_ON reports in [0].

In commit 13acc94eff12 ("net: permit skb_segment on head_frag frag_list skb"),
skb_segment() was modified to support the "gso_size mangling" case of
a frag_list GRO'ed skb, but *only* for frag_list members having
head_frag==true (having a page-fragment head).

Alas, GRO packets having frag_list members with a linear kmalloced head
(head_frag==false) still hit the BUG_ON.

This commit adds support to skb_segment() for a 'head_skb' packet having
a frag_list whose members are *non* head_frag, with gso_size mangled, by
disabling SG and thus falling-back to copying the data from the given
'head_skb' into the generated segmented skbs - as suggested by Willem de
Bruijn [1].

Since this approach involves the penalty of skb_copy_and_csum_bits()
when building the segments, care was taken in order to enable this
solution only when required:
 - untrusted gso_size, by testing SKB_GSO_DODGY is set
   (SKB_GSO_DODGY is set by any gso_size mangling functions in
    net/core/filter.c)
 - the frag_list is non empty, its item is a non head_frag, *and* the
   headlen of the given 'head_skb' does not match the gso_size.

[0]
https://lore.kernel.org/netdev/20190826170724.25ff616f@pixies/
https://lore.kernel.org/netdev/9265b93f-253d-6b8c-f2b8-4b54eff1835c@fb.com/

[1]
https://lore.kernel.org/netdev/CA+FuTSfVsgNDi7c=GUU8nMg2hWxF2SjCNLXetHeVPdnxAW5K-w@mail.gmail.com/

Fixes: 6578171a7ff0 ("bpf: add bpf_skb_change_proto helper")
Suggested-by: Willem de Bruijn 
Cc: Daniel Borkmann 
Cc: Eric Dumazet 
Cc: Alexander Duyck 
Signed-off-by: Shmulik Ladkani 
Reviewed-by: Willem de Bruijn 
Reviewed-by: Alexander Duyck 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: Fix null de-reference of device refcount

2019-09-19T07:08:00+00:00

[ Upstream commit 10cc514f451a0f239aa34f91bc9dc954a9397840 ]

In event of failure during register_netdevice, free_netdev is
invoked immediately. free_netdev assumes that all the netdevice
refcounts have been dropped prior to it being called and as a
result frees and clears out the refcount pointer.

However, this is not necessarily true as some of the operations
in the NETDEV_UNREGISTER notifier handlers queue RCU callbacks for
invocation after a grace period. The IPv4 callback in_dev_rcu_put
tries to access the refcount after free_netdev is called which
leads to a null de-reference-

44837.761523:   <6> Unable to handle kernel paging request at
                    virtual address 0000004a88287000
44837.761651:   <2> pc : in_dev_finish_destroy+0x4c/0xc8
44837.761654:   <2> lr : in_dev_finish_destroy+0x2c/0xc8
44837.762393:   <2> Call trace:
44837.762398:   <2>  in_dev_finish_destroy+0x4c/0xc8
44837.762404:   <2>  in_dev_rcu_put+0x24/0x30
44837.762412:   <2>  rcu_nocb_kthread+0x43c/0x468
44837.762418:   <2>  kthread+0x118/0x128
44837.762424:   <2>  ret_from_fork+0x10/0x1c

Fix this by waiting for the completion of the call_rcu() in
case of register_netdevice errors.

Fixes: 93ee31f14f6f ("[NET]: Fix free_netdev on register_netdev failure.")
Cc: Sean Tranchetti 
Signed-off-by: Subash Abhinov Kasiviswanathan 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv6: Fix the link time qualifier of 'ping_v6_proc_exit_net()'

2019-09-19T07:08:00+00:00

[ Upstream commit d23dbc479a8e813db4161a695d67da0e36557846 ]

The '.exit' functions from 'pernet_operations' structure should be marked
as __net_exit, not __net_init.

Fixes: d862e5461423 ("net: ipv6: Implement /proc/net/icmp6.")
Signed-off-by: Christophe JAILLET 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

bridge/mdb: remove wrong use of NLM_F_MULTI

2019-09-19T07:07:59+00:00

[ Upstream commit 94a72b3f024fc7e9ab640897a1e38583a470659d ]

NLM_F_MULTI must be used only when a NLMSG_DONE message is sent at the end.
In fact, NLMSG_DONE is sent only at the end of a dump.

Libraries like libnl will wait forever for NLMSG_DONE.

Fixes: 949f1e39a617 ("bridge: mdb: notify on router port add and del")
CC: Nikolay Aleksandrov 
Signed-off-by: Nicolas Dichtel 
Acked-by: Nikolay Aleksandrov 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

hv_sock: Fix hang when a connection is closed

2019-09-16T06:20:45+00:00

[ Upstream commit 685703b497bacea8765bb409d6b73455b73c540e ]

There is a race condition for an established connection that is being closed
by the guest: the refcnt is 4 at the end of hvs_release() (Note: here the
'remove_sock' is false):

1 for the initial value;
1 for the sk being in the bound list;
1 for the sk being in the connected list;
1 for the delayed close_work.

After hvs_release() finishes, __vsock_release() -> sock_put(sk) *may*
decrease the refcnt to 3.

Concurrently, hvs_close_connection() runs in another thread:
  calls vsock_remove_sock() to decrease the refcnt by 2;
  call sock_put() to decrease the refcnt to 0, and free the sk;
  next, the "release_sock(sk)" may hang due to use-after-free.

In the above, after hvs_release() finishes, if hvs_close_connection() runs
faster than "__vsock_release() -> sock_put(sk)", then there is not any issue,
because at the beginning of hvs_close_connection(), the refcnt is still 4.

The issue can be resolved if an extra reference is taken when the
connection is established.

Fixes: a9eeb998c28d ("hv_sock: Add support for delayed close")
Signed-off-by: Dexuan Cui 
Reviewed-by: Sunil Muthuswamy 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin