linux.git/net, branch v4.19.145 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git net: disable netpoll on fresh napis 2020-09-12T11:40:23+00:00 Jakub Kicinski kuba@kernel.org 2020-08-26T19:40:06+00:00 9f313bcb3b3d021f9b2f04f6d8464f8e9e309452 [ Upstream commit 96e97bc07e90f175a8980a22827faf702ca4cb30 ] napi_disable() makes sure to set the NAPI_STATE_NPSVC bit to prevent netpoll from accessing rings before init is complete. However, the same is not done for fresh napi instances in netif_napi_add(), even though we expect NAPI instances to be added as disabled. This causes crashes during driver reconfiguration (enabling XDP, changing the channel count) - if there is any printk() after netif_napi_add() but before napi_enable(). To ensure memory ordering is correct we need to use RCU accessors. Reported-by: Rob Sherwood <rsher@fb.com> Fixes: 2d8bff12699a ("netpoll: Close race condition between poll_one_napi and napi_disable") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 96e97bc07e90f175a8980a22827faf702ca4cb30 ]

napi_disable() makes sure to set the NAPI_STATE_NPSVC bit to prevent
netpoll from accessing rings before init is complete. However, the
same is not done for fresh napi instances in netif_napi_add(),
even though we expect NAPI instances to be added as disabled.

This causes crashes during driver reconfiguration (enabling XDP,
changing the channel count) - if there is any printk() after
netif_napi_add() but before napi_enable().

To ensure memory ordering is correct we need to use RCU accessors.

Reported-by: Rob Sherwood <rsher@fb.com>
Fixes: 2d8bff12699a ("netpoll: Close race condition between poll_one_napi and napi_disable")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tipc: fix shutdown() of connectionless socket 2020-09-12T11:40:22+00:00 Tetsuo Handa penguin-kernel@I-love.SAKURA.ne.jp 2020-09-02T13:44:16+00:00 553d1bb7f4d1d2b86b7527c10be31b2f5f78bd8c [ Upstream commit 2a63866c8b51a3f72cea388dfac259d0e14c4ba6 ] syzbot is reporting hung task at nbd_ioctl() [1], for there are two problems regarding TIPC's connectionless socket's shutdown() operation. ---------- #include <fcntl.h> #include <sys/socket.h> #include <sys/ioctl.h> #include <linux/nbd.h> #include <unistd.h> int main(int argc, char *argv[]) { const int fd = open("/dev/nbd0", 3); alarm(5); ioctl(fd, NBD_SET_SOCK, socket(PF_TIPC, SOCK_DGRAM, 0)); ioctl(fd, NBD_DO_IT, 0); /* To be interrupted by SIGALRM. */ return 0; } ---------- One problem is that wait_for_completion() from flush_workqueue() from nbd_start_device_ioctl() from nbd_ioctl() cannot be completed when nbd_start_device_ioctl() received a signal at wait_event_interruptible(), for tipc_shutdown() from kernel_sock_shutdown(SHUT_RDWR) from nbd_mark_nsock_dead() from sock_shutdown() from nbd_start_device_ioctl() is failing to wake up a WQ thread sleeping at wait_woken() from tipc_wait_for_rcvmsg() from sock_recvmsg() from sock_xmit() from nbd_read_stat() from recv_work() scheduled by nbd_start_device() from nbd_start_device_ioctl(). Fix this problem by always invoking sk->sk_state_change() (like inet_shutdown() does) when tipc_shutdown() is called. The other problem is that tipc_wait_for_rcvmsg() cannot return when tipc_shutdown() is called, for tipc_shutdown() sets sk->sk_shutdown to SEND_SHUTDOWN (despite "how" is SHUT_RDWR) while tipc_wait_for_rcvmsg() needs sk->sk_shutdown set to RCV_SHUTDOWN or SHUTDOWN_MASK. Fix this problem by setting sk->sk_shutdown to SHUTDOWN_MASK (like inet_shutdown() does) when the socket is connectionless. [1] https://syzkaller.appspot.com/bug?id=3fe51d307c1f0a845485cf1798aa059d12bf18b2 Reported-by: syzbot <syzbot+e36f41d207137b5d12f7@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 2a63866c8b51a3f72cea388dfac259d0e14c4ba6 ]

syzbot is reporting hung task at nbd_ioctl() [1], for there are two
problems regarding TIPC's connectionless socket's shutdown() operation.

----------
#include <fcntl.h>
#include <sys/socket.h>
#include <sys/ioctl.h>
#include <linux/nbd.h>
#include <unistd.h>

int main(int argc, char *argv[])
{
        const int fd = open("/dev/nbd0", 3);
        alarm(5);
        ioctl(fd, NBD_SET_SOCK, socket(PF_TIPC, SOCK_DGRAM, 0));
        ioctl(fd, NBD_DO_IT, 0); /* To be interrupted by SIGALRM. */
        return 0;
}
----------

One problem is that wait_for_completion() from flush_workqueue() from
nbd_start_device_ioctl() from nbd_ioctl() cannot be completed when
nbd_start_device_ioctl() received a signal at wait_event_interruptible(),
for tipc_shutdown() from kernel_sock_shutdown(SHUT_RDWR) from
nbd_mark_nsock_dead() from sock_shutdown() from nbd_start_device_ioctl()
is failing to wake up a WQ thread sleeping at wait_woken() from
tipc_wait_for_rcvmsg() from sock_recvmsg() from sock_xmit() from
nbd_read_stat() from recv_work() scheduled by nbd_start_device() from
nbd_start_device_ioctl(). Fix this problem by always invoking
sk->sk_state_change() (like inet_shutdown() does) when tipc_shutdown() is
called.

The other problem is that tipc_wait_for_rcvmsg() cannot return when
tipc_shutdown() is called, for tipc_shutdown() sets sk->sk_shutdown to
SEND_SHUTDOWN (despite "how" is SHUT_RDWR) while tipc_wait_for_rcvmsg()
needs sk->sk_shutdown set to RCV_SHUTDOWN or SHUTDOWN_MASK. Fix this
problem by setting sk->sk_shutdown to SHUTDOWN_MASK (like inet_shutdown()
does) when the socket is connectionless.

[1] https://syzkaller.appspot.com/bug?id=3fe51d307c1f0a845485cf1798aa059d12bf18b2

Reported-by: syzbot <syzbot+e36f41d207137b5d12f7@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sctp: not disable bh in the whole sctp_get_port_local() 2020-09-12T11:40:22+00:00 Xin Long lucien.xin@gmail.com 2020-08-21T06:59:38+00:00 84cfc87866b7e01b591999cc4cdd176d78a3a69c [ Upstream commit 3106ecb43a05dc3e009779764b9da245a5d082de ] With disabling bh in the whole sctp_get_port_local(), when snum == 0 and too many ports have been used, the do-while loop will take the cpu for a long time and cause cpu stuck: [ ] watchdog: BUG: soft lockup - CPU#11 stuck for 22s! [ ] RIP: 0010:native_queued_spin_lock_slowpath+0x4de/0x940 [ ] Call Trace: [ ] _raw_spin_lock+0xc1/0xd0 [ ] sctp_get_port_local+0x527/0x650 [sctp] [ ] sctp_do_bind+0x208/0x5e0 [sctp] [ ] sctp_autobind+0x165/0x1e0 [sctp] [ ] sctp_connect_new_asoc+0x355/0x480 [sctp] [ ] __sctp_connect+0x360/0xb10 [sctp] There's no need to disable bh in the whole function of sctp_get_port_local. So fix this cpu stuck by removing local_bh_disable() called at the beginning, and using spin_lock_bh() instead. The same thing was actually done for inet_csk_get_port() in Commit ea8add2b1903 ("tcp/dccp: better use of ephemeral ports in bind()"). Thanks to Marcelo for pointing the buggy code out. v1->v2: - use cond_resched() to yield cpu to other tasks if needed, as Eric noticed. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Ying Xu <yinxu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 3106ecb43a05dc3e009779764b9da245a5d082de ]

With disabling bh in the whole sctp_get_port_local(), when
snum == 0 and too many ports have been used, the do-while
loop will take the cpu for a long time and cause cpu stuck:

  [ ] watchdog: BUG: soft lockup - CPU#11 stuck for 22s!
  [ ] RIP: 0010:native_queued_spin_lock_slowpath+0x4de/0x940
  [ ] Call Trace:
  [ ]  _raw_spin_lock+0xc1/0xd0
  [ ]  sctp_get_port_local+0x527/0x650 [sctp]
  [ ]  sctp_do_bind+0x208/0x5e0 [sctp]
  [ ]  sctp_autobind+0x165/0x1e0 [sctp]
  [ ]  sctp_connect_new_asoc+0x355/0x480 [sctp]
  [ ]  __sctp_connect+0x360/0xb10 [sctp]

There's no need to disable bh in the whole function of
sctp_get_port_local. So fix this cpu stuck by removing
local_bh_disable() called at the beginning, and using
spin_lock_bh() instead.

The same thing was actually done for inet_csk_get_port() in
Commit ea8add2b1903 ("tcp/dccp: better use of ephemeral
ports in bind()").

Thanks to Marcelo for pointing the buggy code out.

v1->v2:
  - use cond_resched() to yield cpu to other tasks if needed,
    as Eric noticed.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
netlabel: fix problems with mapping removal 2020-09-12T11:40:22+00:00 Paul Moore paul@paul-moore.com 2020-08-21T20:34:52+00:00 a3a5cb67767464b4c36f9dfc2d4bab3eee9a2d08 [ Upstream commit d3b990b7f327e2afa98006e7666fb8ada8ed8683 ] This patch fixes two main problems seen when removing NetLabel mappings: memory leaks and potentially extra audit noise. The memory leaks are caused by not properly free'ing the mapping's address selector struct when free'ing the entire entry as well as not properly cleaning up a temporary mapping entry when adding new address selectors to an existing entry. This patch fixes both these problems such that kmemleak reports no NetLabel associated leaks after running the SELinux test suite. The potentially extra audit noise was caused by the auditing code in netlbl_domhsh_remove_entry() being called regardless of the entry's validity. If another thread had already marked the entry as invalid, but not removed/free'd it from the list of mappings, then it was possible that an additional mapping removal audit record would be generated. This patch fixes this by returning early from the removal function when the entry was previously marked invalid. This change also had the side benefit of improving the code by decreasing the indentation level of large chunk of code by one (accounting for most of the diffstat). Fixes: 63c416887437 ("netlabel: Add network address selectors to the NetLabel/LSM domain mapping") Reported-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit d3b990b7f327e2afa98006e7666fb8ada8ed8683 ]

This patch fixes two main problems seen when removing NetLabel
mappings: memory leaks and potentially extra audit noise.

The memory leaks are caused by not properly free'ing the mapping's
address selector struct when free'ing the entire entry as well as
not properly cleaning up a temporary mapping entry when adding new
address selectors to an existing entry.  This patch fixes both these
problems such that kmemleak reports no NetLabel associated leaks
after running the SELinux test suite.

The potentially extra audit noise was caused by the auditing code in
netlbl_domhsh_remove_entry() being called regardless of the entry's
validity.  If another thread had already marked the entry as invalid,
but not removed/free'd it from the list of mappings, then it was
possible that an additional mapping removal audit record would be
generated.  This patch fixes this by returning early from the removal
function when the entry was previously marked invalid.  This change
also had the side benefit of improving the code by decreasing the
indentation level of large chunk of code by one (accounting for most
of the diffstat).

Fixes: 63c416887437 ("netlabel: Add network address selectors to the NetLabel/LSM domain mapping")
Reported-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cfg80211: regulatory: reject invalid hints 2020-09-09T17:04:32+00:00 Johannes Berg johannes.berg@intel.com 2020-08-19T08:46:48+00:00 1b097d5d41a19cca34116ce8ebef566c9c61c482 commit 47caf685a6854593348f216e0b489b71c10cbe03 upstream. Reject invalid hints early in order to not cause a kernel WARN later if they're restored to or similar. Reported-by: syzbot+d451401ffd00a60677ee@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=d451401ffd00a60677ee Link: https://lore.kernel.org/r/20200819084648.13956-1-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 47caf685a6854593348f216e0b489b71c10cbe03 upstream.

Reject invalid hints early in order to not cause a kernel
WARN later if they're restored to or similar.

Reported-by: syzbot+d451401ffd00a60677ee@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=d451401ffd00a60677ee
Link: https://lore.kernel.org/r/20200819084648.13956-1-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
netfilter: nfnetlink: nfnetlink_unicast() reports EAGAIN instead of ENOBUFS 2020-09-09T17:04:26+00:00 Pablo Neira Ayuso pablo@netfilter.org 2020-08-23T11:55:36+00:00 9ad2f018636c6741c41867f14d49d9441b50930d [ Upstream commit ee921183557af39c1a0475f982d43b0fcac25e2e ] Frontend callback reports EAGAIN to nfnetlink to retry a command, this is used to signal that module autoloading is required. Unfortunately, nlmsg_unicast() reports EAGAIN in case the receiver socket buffer gets full, so it enters a busy-loop. This patch updates nfnetlink_unicast() to turn EAGAIN into ENOBUFS and to use nlmsg_unicast(). Remove the flags field in nfnetlink_unicast() since this is always MSG_DONTWAIT in the existing code which is exactly what nlmsg_unicast() passes to netlink_unicast() as parameter. Fixes: 96518518cc41 ("netfilter: add nftables") Reported-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ee921183557af39c1a0475f982d43b0fcac25e2e ]

Frontend callback reports EAGAIN to nfnetlink to retry a command, this
is used to signal that module autoloading is required. Unfortunately,
nlmsg_unicast() reports EAGAIN in case the receiver socket buffer gets
full, so it enters a busy-loop.

This patch updates nfnetlink_unicast() to turn EAGAIN into ENOBUFS and
to use nlmsg_unicast(). Remove the flags field in nfnetlink_unicast()
since this is always MSG_DONTWAIT in the existing code which is exactly
what nlmsg_unicast() passes to netlink_unicast() as parameter.

Fixes: 96518518cc41 ("netfilter: add nftables")
Reported-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
netfilter: nf_tables: fix destination register zeroing 2020-09-09T17:04:25+00:00 Florian Westphal fw@strlen.de 2020-08-20T19:05:50+00:00 86c459915577b0c87287b11f4dde44f908885461 [ Upstream commit 1e105e6afa6c3d32bfb52c00ffa393894a525c27 ] Following bug was reported via irc: nft list ruleset set knock_candidates_ipv4 { type ipv4_addr . inet_service size 65535 elements = { 127.0.0.1 . 123, 127.0.0.1 . 123 } } .. udp dport 123 add @knock_candidates_ipv4 { ip saddr . 123 } udp dport 123 add @knock_candidates_ipv4 { ip saddr . udp dport } It should not have been possible to add a duplicate set entry. After some debugging it turned out that the problem is the immediate value (123) in the second-to-last rule. Concatenations use 32bit registers, i.e. the elements are 8 bytes each, not 6 and it turns out the kernel inserted inet firewall @knock_candidates_ipv4 element 0100007f ffff7b00 : 0 [end] element 0100007f 00007b00 : 0 [end] Note the non-zero upper bits of the first element. It turns out that nft_immediate doesn't zero the destination register, but this is needed when the length isn't a multiple of 4. Furthermore, the zeroing in nft_payload is broken. We can't use [len / 4] = 0 -- if len is a multiple of 4, index is off by one. Skip zeroing in this case and use a conditional instead of (len -1) / 4. Fixes: 49499c3e6e18 ("netfilter: nf_tables: switch registers to 32 bit addressing") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 1e105e6afa6c3d32bfb52c00ffa393894a525c27 ]

Following bug was reported via irc:
nft list ruleset
   set knock_candidates_ipv4 {
      type ipv4_addr . inet_service
      size 65535
      elements = { 127.0.0.1 . 123,
                   127.0.0.1 . 123 }
      }
 ..
   udp dport 123 add @knock_candidates_ipv4 { ip saddr . 123 }
   udp dport 123 add @knock_candidates_ipv4 { ip saddr . udp dport }

It should not have been possible to add a duplicate set entry.

After some debugging it turned out that the problem is the immediate
value (123) in the second-to-last rule.

Concatenations use 32bit registers, i.e. the elements are 8 bytes each,
not 6 and it turns out the kernel inserted

inet firewall @knock_candidates_ipv4
        element 0100007f ffff7b00  : 0 [end]
        element 0100007f 00007b00  : 0 [end]

Note the non-zero upper bits of the first element.  It turns out that
nft_immediate doesn't zero the destination register, but this is needed
when the length isn't a multiple of 4.

Furthermore, the zeroing in nft_payload is broken.  We can't use
[len / 4] = 0 -- if len is a multiple of 4, index is off by one.

Skip zeroing in this case and use a conditional instead of (len -1) / 4.

Fixes: 49499c3e6e18 ("netfilter: nf_tables: switch registers to 32 bit addressing")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
netfilter: nf_tables: add NFTA_SET_USERDATA if not null 2020-09-09T17:04:24+00:00 Pablo Neira Ayuso pablo@netfilter.org 2020-08-20T12:12:54+00:00 88c161599f17249deed573befc5f85f4cd919e7b [ Upstream commit 6f03bf43ee05b31d3822def2a80f11b3591c55b3 ] Kernel sends an empty NFTA_SET_USERDATA attribute with no value if userspace adds a set with no NFTA_SET_USERDATA attribute. Fixes: e6d8ecac9e68 ("netfilter: nf_tables: Add new attributes into nft_set to store user data.") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 6f03bf43ee05b31d3822def2a80f11b3591c55b3 ]

Kernel sends an empty NFTA_SET_USERDATA attribute with no value if
userspace adds a set with no NFTA_SET_USERDATA attribute.

Fixes: e6d8ecac9e68 ("netfilter: nf_tables: Add new attributes into nft_set to store user data.")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
batman-adv: bla: use netif_rx_ni when not in interrupt context 2020-09-09T17:04:24+00:00 Jussi Kivilinna jussi.kivilinna@haltian.com 2020-08-18T14:46:10+00:00 3eabc73c4a3ce80559886c9386f132399f0ad8fe [ Upstream commit 279e89b2281af3b1a9f04906e157992c19c9f163 ] batadv_bla_send_claim() gets called from worker thread context through batadv_bla_periodic_work(), thus netif_rx_ni needs to be used in that case. This fixes "NOHZ: local_softirq_pending 08" log messages seen when batman-adv is enabled. Fixes: 23721387c409 ("batman-adv: add basic bridge loop avoidance code") Signed-off-by: Jussi Kivilinna <jussi.kivilinna@haltian.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 279e89b2281af3b1a9f04906e157992c19c9f163 ]

batadv_bla_send_claim() gets called from worker thread context through
batadv_bla_periodic_work(), thus netif_rx_ni needs to be used in that
case. This fixes "NOHZ: local_softirq_pending 08" log messages seen
when batman-adv is enabled.

Fixes: 23721387c409 ("batman-adv: add basic bridge loop avoidance code")
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@haltian.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
batman-adv: Fix own OGM check in aggregated OGMs 2020-09-09T17:04:24+00:00 Linus Lüssing linus.luessing@c0d3.blue 2020-07-23T12:28:08+00:00 e6723a869abe3aa171cc2f6bc1686025447fce95 [ Upstream commit d8bf0c01642275c7dca1e5d02c34e4199c200b1f ] The own OGM check is currently misplaced and can lead to the following issues: For one thing we might receive an aggregated OGM from a neighbor node which has our own OGM in the first place. We would then not only skip our own OGM but erroneously also any other, following OGM in the aggregate. For another, we might receive an OGM aggregate which has our own OGM in a place other then the first one. Then we would wrongly not skip this OGM, leading to populating the orginator and gateway table with ourself. Fixes: 9323158ef9f4 ("batman-adv: OGMv2 - implement originators logic") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit d8bf0c01642275c7dca1e5d02c34e4199c200b1f ]

The own OGM check is currently misplaced and can lead to the following
issues:

For one thing we might receive an aggregated OGM from a neighbor node
which has our own OGM in the first place. We would then not only skip
our own OGM but erroneously also any other, following OGM in the
aggregate.

For another, we might receive an OGM aggregate which has our own OGM in
a place other then the first one. Then we would wrongly not skip this
OGM, leading to populating the orginator and gateway table with ourself.

Fixes: 9323158ef9f4 ("batman-adv: OGMv2 - implement originators logic")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>