linux.git/net, branch v4.19.285

atm: hide unused procfs functions

2023-06-09T08:24:01+00:00

[ Upstream commit fb1b7be9b16c1f4626969ba4e95a97da2a452b41 ]

When CONFIG_PROC_FS is disabled, the function declarations for some
procfs functions are hidden, but the definitions are still build,
as shown by this compiler warning:

net/atm/resources.c:403:7: error: no previous prototype for 'atm_dev_seq_start' [-Werror=missing-prototypes]
net/atm/resources.c:409:6: error: no previous prototype for 'atm_dev_seq_stop' [-Werror=missing-prototypes]
net/atm/resources.c:414:7: error: no previous prototype for 'atm_dev_seq_next' [-Werror=missing-prototypes]

Add another #ifdef to leave these out of the build.

Signed-off-by: Arnd Bergmann 
Link: https://lore.kernel.org/r/20230516194625.549249-2-arnd@kernel.org
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

netfilter: conntrack: define variables exp_nat_nla_policy and any_addr with CONFIG_NF_NAT

2023-06-09T08:24:00+00:00

[ Upstream commit 224a876e37543eee111bf9b6aa4935080e619335 ]

gcc with W=1 and ! CONFIG_NF_NAT
net/netfilter/nf_conntrack_netlink.c:3463:32: error:
  ‘exp_nat_nla_policy’ defined but not used [-Werror=unused-const-variable=]
 3463 | static const struct nla_policy exp_nat_nla_policy[CTA_EXPECT_NAT_MAX+1] = {
      |                                ^~~~~~~~~~~~~~~~~~
net/netfilter/nf_conntrack_netlink.c:2979:33: error:
  ‘any_addr’ defined but not used [-Werror=unused-const-variable=]
 2979 | static const union nf_inet_addr any_addr;
      |                                 ^~~~~~~~

These variables use is controlled by CONFIG_NF_NAT, so should their definitions.

Signed-off-by: Tom Rix 
Reviewed-by: Simon Horman 
Signed-off-by: Florian Westphal 
Signed-off-by: Sasha Levin

xfrm: Check if_id in inbound policy/secpath match

2023-06-09T08:23:58+00:00

[ Upstream commit 8680407b6f8f5fba59e8f1d63c869abc280f04df ]

This change ensures that if configured in the policy, the if_id set in
the policy and secpath states match during the inbound policy check.
Without this, there is potential for ambiguity where entries in the
secpath differing by only the if_id could be mismatched.

Notably, this is checked in the outbound direction when resolving
templates to SAs, but not on the inbound path when matching SAs and
policies.

Test: Tested against Android kernel unit tests & CTS
Signed-off-by: Benedict Wong 
Signed-off-by: Steffen Klassert 
Signed-off-by: Sasha Levin

net/sched: flower: fix possible OOB write in fl_set_geneve_opt()

2023-06-09T08:23:57+00:00

[ Upstream commit 4d56304e5827c8cc8cc18c75343d283af7c4825c ]

If we send two TCA_FLOWER_KEY_ENC_OPTS_GENEVE packets and their total
size is 252 bytes(key->enc_opts.len = 252) then
key->enc_opts.len = opt->length = data_len / 4 = 0 when the third
TCA_FLOWER_KEY_ENC_OPTS_GENEVE packet enters fl_set_geneve_opt. This
bypasses the next bounds check and results in an out-of-bounds.

Fixes: 0a6e77784f49 ("net/sched: allow flower to match tunnel options")
Signed-off-by: Hangyu Hua 
Reviewed-by: Simon Horman 
Reviewed-by: Pieter Jansen van Vuuren 
Link: https://lore.kernel.org/r/20230531102805.27090-1-hbh25y@gmail.com
Signed-off-by: Paolo Abeni 
Signed-off-by: Sasha Levin

udp6: Fix race condition in udp6_sendmsg & connect

2023-06-09T08:23:57+00:00

[ Upstream commit 448a5ce1120c5bdbce1f1ccdabcd31c7d029f328 ]

Syzkaller got the following report:
BUG: KASAN: use-after-free in sk_setup_caps+0x621/0x690 net/core/sock.c:2018
Read of size 8 at addr ffff888027f82780 by task syz-executor276/3255

The function sk_setup_caps (called by ip6_sk_dst_store_flow->
ip6_dst_store) referenced already freed memory as this memory was
freed by parallel task in udpv6_sendmsg->ip6_sk_dst_lookup_flow->
sk_dst_check.

          task1 (connect)              task2 (udp6_sendmsg)
        sk_setup_caps->sk_dst_set |
                                  |  sk_dst_check->
                                  |      sk_dst_set
                                  |      dst_release
        sk_setup_caps references  |
        to already freed dst_entry|

The reason for this race condition is: sk_setup_caps() keeps using
the dst after transferring the ownership to the dst cache.

Found by Linux Verification Center (linuxtesting.org) with syzkaller.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Vladislav Efanov 
Signed-off-by: Paolo Abeni 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net/netlink: fix NETLINK_LIST_MEMBERSHIPS length report

2023-06-09T08:23:56+00:00

[ Upstream commit f4e4534850a9d18c250a93f8d7fbb51310828110 ]

The current code for the length calculation wrongly truncates the reported
length of the groups array, causing an under report of the subscribed
groups. To fix this, use 'BITS_TO_BYTES()' which rounds up the
division by 8.

Fixes: b42be38b2778 ("netlink: add API to retrieve all group memberships")
Signed-off-by: Pedro Tammela 
Reviewed-by: Simon Horman 
Link: https://lore.kernel.org/r/20230529153335.389815-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

net: sched: fix NULL pointer dereference in mq_attach

2023-06-09T08:23:56+00:00

[ Upstream commit 36eec020fab668719b541f34d97f44e232ffa165 ]

When use the following command to test:
1)ip link add bond0 type bond
2)ip link set bond0 up
3)tc qdisc add dev bond0 root handle ffff: mq
4)tc qdisc replace dev bond0 parent ffff:fff1 handle ffff: mq

The kernel reports NULL pointer dereference issue. The stack information
is as follows:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Internal error: Oops: 0000000096000006 [#1] SMP
Modules linked in:
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mq_attach+0x44/0xa0
lr : qdisc_graft+0x20c/0x5cc
sp : ffff80000e2236a0
x29: ffff80000e2236a0 x28: ffff0000c0e59d80 x27: ffff0000c0be19c0
x26: ffff0000cae3e800 x25: 0000000000000010 x24: 00000000fffffff1
x23: 0000000000000000 x22: ffff0000cae3e800 x21: ffff0000c9df4000
x20: ffff0000c9df4000 x19: 0000000000000000 x18: ffff80000a934000
x17: ffff8000f5b56000 x16: ffff80000bb08000 x15: 0000000000000000
x14: 0000000000000000 x13: 6b6b6b6b6b6b6b6b x12: 6b6b6b6b00000001
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : ffff0000c0be0730 x7 : bbbbbbbbbbbbbbbb x6 : 0000000000000008
x5 : ffff0000cae3e864 x4 : 0000000000000000 x3 : 0000000000000001
x2 : 0000000000000001 x1 : ffff8000090bc23c x0 : 0000000000000000
Call trace:
mq_attach+0x44/0xa0
qdisc_graft+0x20c/0x5cc
tc_modify_qdisc+0x1c4/0x664
rtnetlink_rcv_msg+0x354/0x440
netlink_rcv_skb+0x64/0x144
rtnetlink_rcv+0x28/0x34
netlink_unicast+0x1e8/0x2a4
netlink_sendmsg+0x308/0x4a0
sock_sendmsg+0x64/0xac
____sys_sendmsg+0x29c/0x358
___sys_sendmsg+0x90/0xd0
__sys_sendmsg+0x7c/0xd0
__arm64_sys_sendmsg+0x2c/0x38
invoke_syscall+0x54/0x114
el0_svc_common.constprop.1+0x90/0x174
do_el0_svc+0x3c/0xb0
el0_svc+0x24/0xec
el0t_64_sync_handler+0x90/0xb4
el0t_64_sync+0x174/0x178

This is because when mq is added for the first time, qdiscs in mq is set
to NULL in mq_attach(). Therefore, when replacing mq after adding mq, we
need to initialize qdiscs in the mq before continuing to graft. Otherwise,
it will couse NULL pointer dereference issue in mq_attach(). And the same
issue will occur in the attach functions of mqprio, taprio and htb.
ffff:fff1 means that the repalce qdisc is ingress. Ingress does not allow
any qdisc to be attached. Therefore, ffff:fff1 is incorrectly used, and
the command should be dropped.

Fixes: 6ec1c69a8f64 ("net_sched: add classful multiqueue dummy scheduler")
Signed-off-by: Zhengchao Shao 
Tested-by: Peilin Ye 
Acked-by: Jamal Hadi Salim 
Link: https://lore.kernel.org/r/20230527093747.3583502-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

net/sched: Prohibit regrafting ingress or clsact Qdiscs

2023-06-09T08:23:56+00:00

[ Upstream commit 9de95df5d15baa956c2b70b9e794842e790a8a13 ]

Currently, after creating an ingress (or clsact) Qdisc and grafting it
under TC_H_INGRESS (TC_H_CLSACT), it is possible to graft it again under
e.g. a TBF Qdisc:

  $ ip link add ifb0 type ifb
  $ tc qdisc add dev ifb0 handle 1: root tbf rate 20kbit buffer 1600 limit 3000
  $ tc qdisc add dev ifb0 clsact
  $ tc qdisc link dev ifb0 handle ffff: parent 1:1
  $ tc qdisc show dev ifb0
  qdisc tbf 1: root refcnt 2 rate 20Kbit burst 1600b lat 560.0ms
  qdisc clsact ffff: parent ffff:fff1 refcnt 2
                                      ^^^^^^^^

clsact's refcount has increased: it is now grafted under both
TC_H_CLSACT and 1:1.

ingress and clsact Qdiscs should only be used under TC_H_INGRESS
(TC_H_CLSACT).  Prohibit regrafting them.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Fixes: 1f211a1b929c ("net, sched: add clsact qdisc")
Tested-by: Pedro Tammela 
Acked-by: Jamal Hadi Salim 
Reviewed-by: Jamal Hadi Salim 
Reviewed-by: Vlad Buslov 
Signed-off-by: Peilin Ye 
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

net/sched: Reserve TC_H_INGRESS (TC_H_CLSACT) for ingress (clsact) Qdiscs

2023-06-09T08:23:56+00:00

[ Upstream commit f85fa45d4a9408d98c46c8fa45ba2e3b2f4bf219 ]

Currently it is possible to add e.g. an HTB Qdisc under ffff:fff1
(TC_H_INGRESS, TC_H_CLSACT):

  $ ip link add name ifb0 type ifb
  $ tc qdisc add dev ifb0 parent ffff:fff1 htb
  $ tc qdisc add dev ifb0 clsact
  Error: Exclusivity flag on, cannot modify.
  $ drgn
  ...
  >>> ifb0 = netdev_get_by_name(prog, "ifb0")
  >>> qdisc = ifb0.ingress_queue.qdisc_sleeping
  >>> print(qdisc.ops.id.string_().decode())
  htb
  >>> qdisc.flags.value_() # TCQ_F_INGRESS
  2

Only allow ingress and clsact Qdiscs under ffff:fff1.  Return -EINVAL
for everything else.  Make TCQ_F_INGRESS a static flag of ingress and
clsact Qdiscs.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Fixes: 1f211a1b929c ("net, sched: add clsact qdisc")
Tested-by: Pedro Tammela 
Acked-by: Jamal Hadi Salim 
Reviewed-by: Jamal Hadi Salim 
Reviewed-by: Vlad Buslov 
Signed-off-by: Peilin Ye 
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

net/sched: sch_clsact: Only create under TC_H_CLSACT

2023-06-09T08:23:56+00:00

[ Upstream commit 5eeebfe6c493192b10d516abfd72742900f2a162 ]

clsact Qdiscs are only supposed to be created under TC_H_CLSACT (which
equals TC_H_INGRESS).  Return -EOPNOTSUPP if 'parent' is not
TC_H_CLSACT.

Fixes: 1f211a1b929c ("net, sched: add clsact qdisc")
Tested-by: Pedro Tammela 
Acked-by: Jamal Hadi Salim 
Reviewed-by: Jamal Hadi Salim 
Reviewed-by: Vlad Buslov 
Signed-off-by: Peilin Ye 
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin