linux.git/net, branch v4.8.10

sctp: change sk state only when it has assocs in sctp_shutdown

2016-11-21T09:11:36+00:00

[ Upstream commit 5bf35ddfee052d44f39ebaa395d87101c8918405 ]

Now when users shutdown a sock with SEND_SHUTDOWN in sctp, even if
this sock has no connection (assoc), sk state would be changed to
SCTP_SS_CLOSING, which is not as we expect.

Besides, after that if users try to listen on this sock, kernel
could even panic when it dereference sctp_sk(sk)->bind_hash in
sctp_inet_listen, as bind_hash is null when sock has no assoc.

This patch is to move sk state change after checking sk assocs
is not empty, and also merge these two if() conditions and reduce
indent level.

Fixes: d46e416c11c8 ("sctp: sctp should change socket state when shutdown is received")
Reported-by: Andrey Konovalov 
Tested-by: Andrey Konovalov 
Signed-off-by: Xin Long 
Acked-by: Marcelo Ricardo Leitner 
Acked-by: Neil Horman 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tcp: take care of truncations done by sk_filter()

2016-11-21T09:11:36+00:00

[ Upstream commit ac6e780070e30e4c35bd395acfe9191e6268bdd3 ]

With syzkaller help, Marco Grassi found a bug in TCP stack,
crashing in tcp_collapse()

Root cause is that sk_filter() can truncate the incoming skb,
but TCP stack was not really expecting this to happen.
It probably was expecting a simple DROP or ACCEPT behavior.

We first need to make sure no part of TCP header could be removed.
Then we need to adjust TCP_SKB_CB(skb)->end_seq

Many thanks to syzkaller team and Marco for giving us a reproducer.

Signed-off-by: Eric Dumazet 
Reported-by: Marco Grassi 
Reported-by: Vladis Dronov 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv4: use new_gw for redirect neigh lookup

2016-11-21T09:11:36+00:00

[ Upstream commit 969447f226b451c453ddc83cac6144eaeac6f2e3 ]

In v2.6, ip_rt_redirect() calls arp_bind_neighbour() which returns 0
and then the state of the neigh for the new_gw is checked. If the state
isn't valid then the redirected route is deleted. This behavior is
maintained up to v3.5.7 by check_peer_redirect() because rt->rt_gateway
is assigned to peer->redirect_learned.a4 before calling
ipv4_neigh_lookup().

After commit 5943634fc559 ("ipv4: Maintain redirect and PMTU info in
struct rtable again."), ipv4_neigh_lookup() is performed without the
rt_gateway assigned to the new_gw. In the case when rt_gateway (old_gw)
isn't zero, the function uses it as the key. The neigh is most likely
valid since the old_gw is the one that sends the ICMP redirect message.
Then the new_gw is assigned to fib_nh_exception. The problem is: the
new_gw ARP may never gets resolved and the traffic is blackholed.

So, use the new_gw for neigh lookup.

Changes from v1:
 - use __ipv4_neigh_lookup instead (per Eric Dumazet).

Fixes: 5943634fc559 ("ipv4: Maintain redirect and PMTU info in struct rtable again.")
Signed-off-by: Stephen Suryaputra Lin 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: __skb_flow_dissect() must cap its return value

2016-11-21T09:11:36+00:00

[ Upstream commit 34fad54c2537f7c99d07375e50cb30aa3c23bd83 ]

After Tom patch, thoff field could point past the end of the buffer,
this could fool some callers.

If an skb was provided, skb->len should be the upper limit.
If not, hlen is supposed to be the upper limit.

Fixes: a6e544b0a88b ("flow_dissector: Jump to exit code in __skb_flow_dissect")
Signed-off-by: Eric Dumazet 
Reported-by: Yibin Yang 
Acked-by: Willem de Bruijn 
Acked-by: Alexei Starovoitov 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: icmp_route_lookup should use rt dev to determine L3 domain

2016-11-21T09:11:35+00:00

[ Upstream commit 9d1a6c4ea43e48c7880c85971c17939b56832d8a ]

icmp_send is called in response to some event. The skb may not have
the device set (skb->dev is NULL), but it is expected to have an rt.
Update icmp_route_lookup to use the rt on the skb to determine L3
domain.

Fixes: 613d09b30f8b ("net: Use VRF device index for lookups on TX")
Signed-off-by: David Ahern 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

sock: fix sendmmsg for partial sendmsg

2016-11-21T09:11:35+00:00

[ Upstream commit 3023898b7d4aac65987bd2f485cc22390aae6f78 ]

Do not send the next message in sendmmsg for partial sendmsg
invocations.

sendmmsg assumes that it can continue sending the next message
when the return value of the individual sendmsg invocations
is positive. It results in corrupting the data for TCP,
SCTP, and UNIX streams.

For example, sendmmsg([["abcd"], ["efgh"]]) can result in a stream
of "aefgh" if the first sendmsg invocation sends only the first
byte while the second sendmsg goes through.

Datagram sockets either send the entire datagram or fail, so
this patch affects only sockets of type SOCK_STREAM and
SOCK_SEQPACKET.

Fixes: 228e548e6020 ("net: Add sendmmsg socket system call")
Signed-off-by: Soheil Hassas Yeganeh 
Signed-off-by: Eric Dumazet 
Signed-off-by: Willem de Bruijn 
Signed-off-by: Neal Cardwell 
Acked-by: Maciej Żenczykowski 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

fib_trie: Correct /proc/net/route off by one error

2016-11-21T09:11:35+00:00

[ Upstream commit fd0285a39b1cb496f60210a9a00ad33a815603e7 ]

The display of /proc/net/route has had a couple issues due to the fact that
when I originally rewrote most of fib_trie I made it so that the iterator
was tracking the next value to use instead of the current.

In addition it had an off by 1 error where I was tracking the first piece
of data as position 0, even though in reality that belonged to the
SEQ_START_TOKEN.

This patch updates the code so the iterator tracks the last reported
position and key instead of the next expected position and key.  In
addition it shifts things so that all of the leaves start at 1 instead of
trying to report leaves starting with offset 0 as being valid.  With these
two issues addressed this should resolve any off by one errors that were
present in the display of /proc/net/route.

Fixes: 25b97c016b26 ("ipv4: off-by-one in continuation handling in /proc/net/route")
Cc: Andy Whitcroft 
Reported-by: Jason Baron 
Tested-by: Jason Baron 
Signed-off-by: Alexander Duyck 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: icmp6_send should use dst dev to determine L3 domain

2016-11-21T09:11:35+00:00

[ Upstream commit 5d41ce29e3b91ef305f88d23f72b3359de329cec ]

icmp6_send is called in response to some event. The skb may not have
the device set (skb->dev is NULL), but it is expected to have a dst set.
Update icmp6_send to use the dst on the skb to determine L3 domain.

Fixes: ca254490c8dfd ("net: Add VRF support to IPv6 stack")
Signed-off-by: David Ahern 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

sctp: assign assoc_id earlier in __sctp_connect

2016-11-21T09:11:35+00:00

[ Upstream commit 7233bc84a3aeda835d334499dc00448373caf5c0 ]

sctp_wait_for_connect() currently already holds the asoc to keep it
alive during the sleep, in case another thread release it. But Andrey
Konovalov and Dmitry Vyukov reported an use-after-free in such
situation.

Problem is that __sctp_connect() doesn't get a ref on the asoc and will
do a read on the asoc after calling sctp_wait_for_connect(), but by then
another thread may have closed it and the _put on sctp_wait_for_connect
will actually release it, causing the use-after-free.

Fix is, instead of doing the read after waiting for the connect, do it
before so, and avoid this issue as the socket is still locked by then.
There should be no issue on returning the asoc id in case of failure as
the application shouldn't trust on that number in such situations
anyway.

This issue doesn't exist in sctp_sendmsg() path.

Reported-by: Dmitry Vyukov 
Reported-by: Andrey Konovalov 
Tested-by: Andrey Konovalov 
Signed-off-by: Marcelo Ricardo Leitner 
Reviewed-by: Xin Long 
Acked-by: Neil Horman 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv6: dccp: add missing bind_conflict to dccp_ipv6_mapped

2016-11-21T09:11:35+00:00

[ Upstream commit 990ff4d84408fc55942ca6644f67e361737b3d8e ]

While fuzzing kernel with syzkaller, Andrey reported a nasty crash
in inet6_bind() caused by DCCP lacking a required method.

Fixes: ab1e0a13d7029 ("[SOCK] proto: Add hashinfo member to struct proto")
Signed-off-by: Eric Dumazet 
Reported-by: Andrey Konovalov 
Tested-by: Andrey Konovalov 
Cc: Arnaldo Carvalho de Melo 
Acked-by: Arnaldo Carvalho de Melo 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman