linux.git/net, branch v5.9.12 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git batman-adv: set .owner to THIS_MODULE 2020-12-02T07:51:53+00:00 Taehee Yoo ap420073@gmail.com 2020-11-15T10:30:04+00:00 3b065057e10fc4523e32896e434aa3a5f8566724 [ Upstream commit 14a2e551faea53d45bc11629a9dac88f88950ca7 ] If THIS_MODULE is not set, the module would be removed while debugfs is being used. It eventually makes kernel panic. Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 14a2e551faea53d45bc11629a9dac88f88950ca7 ]

If THIS_MODULE is not set, the module would be removed while debugfs is
being used.
It eventually makes kernel panic.

Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ipv4: use IS_ENABLED instead of ifdef 2020-12-02T07:51:43+00:00 Florian Klink flokli@flokli.de 2020-11-15T22:45:09+00:00 f36abf80e9a78f37480bdc4880307f2b76f64ebc commit c09c8a27b9baa417864b9adc3228b10ae5eeec93 upstream. Checking for ifdef CONFIG_x fails if CONFIG_x=m. Use IS_ENABLED instead, which is true for both built-ins and modules. Otherwise, a > ip -4 route add 1.2.3.4/32 via inet6 fe80::2 dev eth1 fails with the message "Error: IPv6 support not enabled in kernel." if CONFIG_IPV6 is `m`. In the spirit of b8127113d01e53adba15b41aefd37b90ed83d631. Fixes: d15662682db2 ("ipv4: Allow ipv6 gateway with ipv4 routes") Cc: Kim Phillips <kim.phillips@arm.com> Signed-off-by: Florian Klink <flokli@flokli.de> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20201115224509.2020651-1-flokli@flokli.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c09c8a27b9baa417864b9adc3228b10ae5eeec93 upstream.

Checking for ifdef CONFIG_x fails if CONFIG_x=m.

Use IS_ENABLED instead, which is true for both built-ins and modules.

Otherwise, a
> ip -4 route add 1.2.3.4/32 via inet6 fe80::2 dev eth1
fails with the message "Error: IPv6 support not enabled in kernel." if
CONFIG_IPV6 is `m`.

In the spirit of b8127113d01e53adba15b41aefd37b90ed83d631.

Fixes: d15662682db2 ("ipv4: Allow ipv6 gateway with ipv4 routes")
Cc: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Florian Klink <flokli@flokli.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20201115224509.2020651-1-flokli@flokli.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mac80211: free sta in sta_info_insert_finish() on errors 2020-11-24T12:39:12+00:00 Johannes Berg johannes.berg@intel.com 2020-11-12T10:22:04+00:00 34349f92ed91f2e28430b4652da17f60c2b4d31f commit 7bc40aedf24d31d8bea80e1161e996ef4299fb10 upstream. If sta_info_insert_finish() fails, we currently keep the station around and free it only in the caller, but there's only one such caller and it always frees it immediately. As syzbot found, another consequence of this split is that we can put things that sleep only into __cleanup_single_sta() and not in sta_info_free(), but this is the only place that requires such of sta_info_free() now. Change this to free the station in sta_info_insert_finish(), in which case we can still sleep. This will also let us unify the cleanup code later. Cc: stable@vger.kernel.org Fixes: dcd479e10a05 ("mac80211: always wind down STA state") Reported-by: syzbot+32c6c38c4812d22f2f0b@syzkaller.appspotmail.com Reported-by: syzbot+4c81fe92e372d26c4246@syzkaller.appspotmail.com Reported-by: syzbot+6a7fe9faf0d1d61bc24a@syzkaller.appspotmail.com Reported-by: syzbot+abed06851c5ffe010921@syzkaller.appspotmail.com Reported-by: syzbot+b7aeb9318541a1c709f1@syzkaller.appspotmail.com Reported-by: syzbot+d5a9416c6cafe53b5dd0@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20201112112201.ee6b397b9453.I9c31d667a0ea2151441cc64ed6613d36c18a48e0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7bc40aedf24d31d8bea80e1161e996ef4299fb10 upstream.

If sta_info_insert_finish() fails, we currently keep the station
around and free it only in the caller, but there's only one such
caller and it always frees it immediately.

As syzbot found, another consequence of this split is that we can
put things that sleep only into __cleanup_single_sta() and not in
sta_info_free(), but this is the only place that requires such of
sta_info_free() now.

Change this to free the station in sta_info_insert_finish(), in
which case we can still sleep. This will also let us unify the
cleanup code later.

Cc: stable@vger.kernel.org
Fixes: dcd479e10a05 ("mac80211: always wind down STA state")
Reported-by: syzbot+32c6c38c4812d22f2f0b@syzkaller.appspotmail.com
Reported-by: syzbot+4c81fe92e372d26c4246@syzkaller.appspotmail.com
Reported-by: syzbot+6a7fe9faf0d1d61bc24a@syzkaller.appspotmail.com
Reported-by: syzbot+abed06851c5ffe010921@syzkaller.appspotmail.com
Reported-by: syzbot+b7aeb9318541a1c709f1@syzkaller.appspotmail.com
Reported-by: syzbot+d5a9416c6cafe53b5dd0@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20201112112201.ee6b397b9453.I9c31d667a0ea2151441cc64ed6613d36c18a48e0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mac80211: minstrel: fix tx status processing corner case 2020-11-24T12:39:12+00:00 Felix Fietkau nbd@nbd.name 2020-11-11T18:33:59+00:00 8ab8b465d07d3d0d2e9a38b8801704aba61036e1 commit b2911a84396f72149dce310a3b64d8948212c1b3 upstream. Some drivers fill the status rate list without setting the rate index after the final rate to -1. minstrel_ht already deals with this, but minstrel doesn't, which causes it to get stuck at the lowest rate on these drivers. Fix this by checking the count as well. Cc: stable@vger.kernel.org Fixes: cccf129f820e ("mac80211: add the 'minstrel' rate control algorithm") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20201111183359.43528-3-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b2911a84396f72149dce310a3b64d8948212c1b3 upstream.

Some drivers fill the status rate list without setting the rate index after
the final rate to -1. minstrel_ht already deals with this, but minstrel
doesn't, which causes it to get stuck at the lowest rate on these drivers.

Fix this by checking the count as well.

Cc: stable@vger.kernel.org
Fixes: cccf129f820e ("mac80211: add the 'minstrel' rate control algorithm")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20201111183359.43528-3-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mac80211: minstrel: remove deferred sampling code 2020-11-24T12:39:12+00:00 Felix Fietkau nbd@nbd.name 2020-11-11T18:33:58+00:00 6e13d4cf38b3b4887582982b0c1e324c748400ee commit 4fe40b8e1566dad04c87fbf299049a1d0d4bd58d upstream. Deferring sampling attempts to the second stage has some bad interactions with drivers that process the rate table in hardware and use the probe flag to indicate probing packets (e.g. most mt76 drivers). On affected drivers it can lead to probing not working at all. If the link conditions turn worse, it might not be such a good idea to do a lot of sampling for lower rates in this case. Fix this by simply skipping the sample attempt instead of deferring it, but keep the checks that would allow it to be sampled if it was skipped too often, but only if it has less than 95% success probability. Also ensure that IEEE80211_TX_CTL_RATE_CTRL_PROBE is set for all probing packets. Cc: stable@vger.kernel.org Fixes: cccf129f820e ("mac80211: add the 'minstrel' rate control algorithm") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20201111183359.43528-2-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4fe40b8e1566dad04c87fbf299049a1d0d4bd58d upstream.

Deferring sampling attempts to the second stage has some bad interactions
with drivers that process the rate table in hardware and use the probe flag
to indicate probing packets (e.g. most mt76 drivers). On affected drivers
it can lead to probing not working at all.

If the link conditions turn worse, it might not be such a good idea to
do a lot of sampling for lower rates in this case.

Fix this by simply skipping the sample attempt instead of deferring it,
but keep the checks that would allow it to be sampled if it was skipped
too often, but only if it has less than 95% success probability.

Also ensure that IEEE80211_TX_CTL_RATE_CTRL_PROBE is set for all probing
packets.

Cc: stable@vger.kernel.org
Fixes: cccf129f820e ("mac80211: add the 'minstrel' rate control algorithm")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20201111183359.43528-2-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bpf, sockmap: Avoid returning unneeded EAGAIN when redirecting to self 2020-11-24T12:39:06+00:00 John Fastabend john.fastabend@gmail.com 2020-11-16T22:28:46+00:00 5a1441d0e39955a140cdebc586e2471a23952b96 [ Upstream commit 6fa9201a898983da731fca068bb4b5c941537588 ] If a socket redirects to itself and it is under memory pressure it is possible to get a socket stuck so that recv() returns EAGAIN and the socket can not advance for some time. This happens because when redirecting a skb to the same socket we received the skb on we first check if it is OK to enqueue the skb on the receiving socket by checking memory limits. But, if the skb is itself the object holding the memory needed to enqueue the skb we will keep retrying from kernel side and always fail with EAGAIN. Then userspace will get a recv() EAGAIN error if there are no skbs in the psock ingress queue. This will continue until either some skbs get kfree'd causing the memory pressure to reduce far enough that we can enqueue the pending packet or the socket is destroyed. In some cases its possible to get a socket stuck for a noticeable amount of time if the socket is only receiving skbs from sk_skb verdict programs. To reproduce I make the socket memory limits ridiculously low so sockets are always under memory pressure. More often though if under memory pressure it looks like a spurious EAGAIN error on user space side causing userspace to retry and typically enough has moved on the memory side that it works. To fix skip memory checks and skb_orphan if receiving on the same sock as already assigned. For SK_PASS cases this is easy, its always the same socket so we can just omit the orphan/set_owner pair. For backlog cases we need to check skb->sk and decide if the orphan and set_owner pair are needed. Fixes: 51199405f9672 ("bpf: skb_verdict, support SK_PASS on RX BPF path") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/160556572660.73229.12566203819812939627.stgit@john-XPS-13-9370 Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 6fa9201a898983da731fca068bb4b5c941537588 ]

If a socket redirects to itself and it is under memory pressure it is
possible to get a socket stuck so that recv() returns EAGAIN and the
socket can not advance for some time. This happens because when
redirecting a skb to the same socket we received the skb on we first
check if it is OK to enqueue the skb on the receiving socket by checking
memory limits. But, if the skb is itself the object holding the memory
needed to enqueue the skb we will keep retrying from kernel side
and always fail with EAGAIN. Then userspace will get a recv() EAGAIN
error if there are no skbs in the psock ingress queue. This will continue
until either some skbs get kfree'd causing the memory pressure to
reduce far enough that we can enqueue the pending packet or the
socket is destroyed. In some cases its possible to get a socket
stuck for a noticeable amount of time if the socket is only receiving
skbs from sk_skb verdict programs. To reproduce I make the socket
memory limits ridiculously low so sockets are always under memory
pressure. More often though if under memory pressure it looks like
a spurious EAGAIN error on user space side causing userspace to retry
and typically enough has moved on the memory side that it works.

To fix skip memory checks and skb_orphan if receiving on the same
sock as already assigned.

For SK_PASS cases this is easy, its always the same socket so we
can just omit the orphan/set_owner pair.

For backlog cases we need to check skb->sk and decide if the orphan
and set_owner pair are needed.

Fixes: 51199405f9672 ("bpf: skb_verdict, support SK_PASS on RX BPF path")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/160556572660.73229.12566203819812939627.stgit@john-XPS-13-9370
Signed-off-by: Sasha Levin <sashal@kernel.org>
bpf, sockmap: Use truesize with sk_rmem_schedule() 2020-11-24T12:39:06+00:00 John Fastabend john.fastabend@gmail.com 2020-11-16T22:28:26+00:00 9668766af9bd459f126e18a3f309f976f6479a25 [ Upstream commit 70796fb751f1d34cc650e640572a174faf009cd4 ] We use skb->size with sk_rmem_scheduled() which is not correct. Instead use truesize to align with socket and tcp stack usage of sk_rmem_schedule. Suggested-by: Daniel Borkman <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/160556570616.73229.17003722112077507863.stgit@john-XPS-13-9370 Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 70796fb751f1d34cc650e640572a174faf009cd4 ]

We use skb->size with sk_rmem_scheduled() which is not correct. Instead
use truesize to align with socket and tcp stack usage of sk_rmem_schedule.

Suggested-by: Daniel Borkman <daniel@iogearbox.net>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/160556570616.73229.17003722112077507863.stgit@john-XPS-13-9370
Signed-off-by: Sasha Levin <sashal@kernel.org>
bpf, sockmap: On receive programs try to fast track SK_PASS ingress 2020-11-24T12:39:06+00:00 John Fastabend john.fastabend@gmail.com 2020-10-09T18:36:37+00:00 98f54326845b1d1df16c105ccf7aa6f06933de22 [ Upstream commit 9ecbfb06a078c4911fb444203e8e41d93d22f886 ] When we receive an skb and the ingress skb verdict program returns SK_PASS we currently set the ingress flag and put it on the workqueue so it can be turned into a sk_msg and put on the sk_msg ingress queue. Then finally telling userspace with data_ready hook. Here we observe that if the workqueue is empty then we can try to convert into a sk_msg type and call data_ready directly without bouncing through a workqueue. Its a common pattern to have a recv verdict program for visibility that always returns SK_PASS. In this case unless there is an ENOMEM error or we overrun the socket we can avoid the workqueue completely only using it when we fall back to error cases caused by memory pressure. By doing this we eliminate another case where data may be dropped if errors occur on memory limits in workqueue. Fixes: 51199405f9672 ("bpf: skb_verdict, support SK_PASS on RX BPF path") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160226859704.5692.12929678876744977669.stgit@john-Precision-5820-Tower Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 9ecbfb06a078c4911fb444203e8e41d93d22f886 ]

When we receive an skb and the ingress skb verdict program returns
SK_PASS we currently set the ingress flag and put it on the workqueue
so it can be turned into a sk_msg and put on the sk_msg ingress queue.
Then finally telling userspace with data_ready hook.

Here we observe that if the workqueue is empty then we can try to
convert into a sk_msg type and call data_ready directly without
bouncing through a workqueue. Its a common pattern to have a recv
verdict program for visibility that always returns SK_PASS. In this
case unless there is an ENOMEM error or we overrun the socket we
can avoid the workqueue completely only using it when we fall back
to error cases caused by memory pressure.

By doing this we eliminate another case where data may be dropped
if errors occur on memory limits in workqueue.

Fixes: 51199405f9672 ("bpf: skb_verdict, support SK_PASS on RX BPF path")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/160226859704.5692.12929678876744977669.stgit@john-Precision-5820-Tower
Signed-off-by: Sasha Levin <sashal@kernel.org>
bpf, sockmap: Skb verdict SK_PASS to self already checked rmem limits 2020-11-24T12:39:06+00:00 John Fastabend john.fastabend@gmail.com 2020-10-09T18:36:16+00:00 029cf9bf04a6ad70e5da65e0280ab68a2fbc7711 [ Upstream commit cfea28f890cf292d5fe90680db64b68086ef25ba ] For sk_skb case where skb_verdict program returns SK_PASS to continue to pass packet up the stack, the memory limits were already checked before enqueuing in skb_queue_tail from TCP side. So, lets remove the extra checks here. The theory is if the TCP stack believes we have memory to receive the packet then lets trust the stack and not double check the limits. In fact the accounting here can cause a drop if sk_rmem_alloc has increased after the stack accepted this packet, but before the duplicate check here. And worse if this happens because TCP stack already believes the data has been received there is no retransmit. Fixes: 51199405f9672 ("bpf: skb_verdict, support SK_PASS on RX BPF path") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160226857664.5692.668205469388498375.stgit@john-Precision-5820-Tower Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit cfea28f890cf292d5fe90680db64b68086ef25ba ]

For sk_skb case where skb_verdict program returns SK_PASS to continue to
pass packet up the stack, the memory limits were already checked before
enqueuing in skb_queue_tail from TCP side. So, lets remove the extra checks
here. The theory is if the TCP stack believes we have memory to receive
the packet then lets trust the stack and not double check the limits.

In fact the accounting here can cause a drop if sk_rmem_alloc has increased
after the stack accepted this packet, but before the duplicate check here.
And worse if this happens because TCP stack already believes the data has
been received there is no retransmit.

Fixes: 51199405f9672 ("bpf: skb_verdict, support SK_PASS on RX BPF path")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/160226857664.5692.668205469388498375.stgit@john-Precision-5820-Tower
Signed-off-by: Sasha Levin <sashal@kernel.org>
bpf, sockmap: Ensure SO_RCVBUF memory is observed on ingress redirect 2020-11-24T12:39:03+00:00 John Fastabend john.fastabend@gmail.com 2020-11-16T22:28:06+00:00 b7372ebc805f4cbf83aac47f822353e8b662e11e [ Upstream commit 36cd0e696a832a00247fca522034703566ac8885 ] Fix sockmap sk_skb programs so that they observe sk_rcvbuf limits. This allows users to tune SO_RCVBUF and sockmap will honor them. We can refactor the if(charge) case out in later patches. But, keep this fix to the point. Fixes: 51199405f9672 ("bpf: skb_verdict, support SK_PASS on RX BPF path") Suggested-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/160556568657.73229.8404601585878439060.stgit@john-XPS-13-9370 Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 36cd0e696a832a00247fca522034703566ac8885 ]

Fix sockmap sk_skb programs so that they observe sk_rcvbuf limits. This
allows users to tune SO_RCVBUF and sockmap will honor them.

We can refactor the if(charge) case out in later patches. But, keep this
fix to the point.

Fixes: 51199405f9672 ("bpf: skb_verdict, support SK_PASS on RX BPF path")
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/160556568657.73229.8404601585878439060.stgit@john-XPS-13-9370
Signed-off-by: Sasha Levin <sashal@kernel.org>