commit e2f1081ca8f18c146e8f928486deac61eca2b517 upstream.

MMIO backend of PCI Bar always assumes little-endian devices and
will convert to CPU endianness automatically. Remove the u32::from_le
conversion which would cause a bug on big-endian machines.

Cc: stable@vger.kernel.org
Reviewed-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Marko Turk <mt@markoturk.info>
Fixes: 685376d18e9a ("samples: rust: add Rust PCI sample driver")
Link: https://patch.msgid.link/20251210112503.62925-2-mt@markoturk.info
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull Char/Misc/IIO/Binder updates from Greg KH:
 "Here is the big set of char/misc/iio and other driver subsystem
  changes for 6.18-rc1.

  Loads of different stuff in here, it was a busy development cycle in
  lots of different subsystems, with over 27k new lines added to the
  tree.

  Included in here are:

   - IIO updates including new drivers, reworking of existing apis, and
     other goodness in the sensor subsystems

   - MEI driver updates and additions

   - NVMEM driver updates

   - slimbus removal for an unused driver and some other minor updates

   - coresight driver updates and additions

   - MHI driver updates

   - comedi driver updates and fixes

   - extcon driver updates

   - interconnect driver additions

   - eeprom driver updates and fixes

   - minor UIO driver updates

   - tiny W1 driver updates

  But the majority of new code is in the rust bindings and additions,
  which includes:

   - misc driver rust binding updates for read/write support, we can now
     write "normal" misc drivers in rust fully, and the sample driver
     shows how this can be done.

   - Initial framework for USB driver rust bindings, which are disabled
     for now in the build, due to limited support, but coming in through
     this tree due to dependencies on other rust binding changes that
     were in here. I'll be enabling these back on in the build in the
     usb.git tree after -rc1 is out so that developers can continue to
     work on these in linux-next over the next development cycle.

   - Android Binder driver implemented in Rust.

     This is the big one, and was driving a huge majority of the rust
     binding work over the past years. Right now there are two binder
     drivers in the kernel, selected only at build time as to which one
     to use as binder wants to be included in the system at boot time.

     The binder C maintainers all agreed on this, as eventually, they
     want the C code to be removed from the tree, but it will take a few
     releases to get there while both are maintained to ensure that the
     rust implementation is fully stable and compliant with the existing
     userspace apis.

  All of these have been in linux-next for a while"

* tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (320 commits)
  rust: usb: keep usb::Device private for now
  rust: usb: don't retain device context for the interface parent
  USB: disable rust bindings from the build for now
  samples: rust: add a USB driver sample
  rust: usb: add basic USB abstractions
  coresight: Add label sysfs node support
  dt-bindings: arm: Add label in the coresight components
  coresight: tnoc: add new AMBA ID to support Trace Noc V2
  coresight: Fix incorrect handling for return value of devm_kzalloc
  coresight: tpda: fix the logic to setup the element size
  coresight: trbe: Return NULL pointer for allocation failures
  coresight: Refactor runtime PM
  coresight: Make clock sequence consistent
  coresight: Refactor driver data allocation
  coresight: Consolidate clock enabling
  coresight: Avoid enable programming clock duplicately
  coresight: Appropriately disable trace bus clocks
  coresight: Appropriately disable programming clocks
  coresight: etm4x: Support atclk
  coresight: catu: Support atclk
  ...

Pull drm updates from Dave Airlie:
 "cross-subsystem:
   - i2c-hid: Make elan touch controllers power on after panel is
     enabled
   - dt bindings for STM32MP25 SoC
   - pci vgaarb: use screen_info helpers
   - rust pin-init updates
   - add MEI driver for late binding firmware update/load

  uapi:
   - add ioctl for reassigning GEM handles
   - provide boot_display attribute on boot-up devices

  core:
   - document DRM_MODE_PAGE_FLIP_EVENT
   - add vendor specific recovery method to drm device wedged uevent

  gem:
   - Simplify gpuvm locking

  ttm:
   - add interface to populate buffers

  sched:
   - Fix race condition in trace code

  atomic:
   - Reallow no-op async page flips

  display:
   - dp: Fix command length

  video:
   - Improve pixel-format handling for struct screen_info

  rust:
   - drop Opaque<> from ioctl args
   - Alloc:
       - BorrowedPage type and AsPageIter traits
       - Implement Vmalloc::to_page() and VmallocPageIter
   - DMA/Scatterlist:
       - Add dma::DataDirection and type alias for dma_addr_t
       - Abstraction for struct scatterlist and sg_table
   - DRM:
       - simplify use of generics
       - add DriverFile type alias
       - drop Object::SIZE
   - Rust:
       - pin-init tree merge
       - Various methods for AsBytes and FromBytes traits

  gpuvm:
   - Support madvice in Xe driver

  gpusvm:
   - fix hmm_pfn_to_map_order usage in gpusvm

  bridge:
   - Improve and fix ref counting on bridge management
   - cdns-dsi: Various improvements to mode setting
   - Support Solomon SSD2825 plus DT bindings
   - Support Waveshare DSI2DPI plus DT bindings
   - Support Content Protection property
   - display-connector: Improve DP display detection
   - Add support for Radxa Ra620 plus DT bindings
   - adv7511: Provide SPD and HDMI infoframes
   - it6505: Replace crypto_shash with sha()
   - synopsys: Add support for DW DPTX Controller plus DT bindings
   - adv7511: Write full Audio infoframe
   - ite6263: Support vendor-specific infoframes
   - simple: Add support for Realtek RTD2171 DP-to-HDMI plus DT bindings

  panel:
   - panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64;
     Support SHP LQ134Z1; Fixes
   - panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings
   - Support Samsung AMS561RA01
   - Support Hydis HV101HD1 plus DT bindings
   - ilitek-ili9881c: Refactor mode setting; Add support for Bestar
     BSD1218-A101KL68 LCD plus DT bindings
   - lvds: Add support for Ampire AMP19201200B5TZQW-T03 to DT bindings
   - edp: Add support for additonal mt8189 Chromebook panels
   - lvds: Add DT bindings for EDT ETML0700Z8DHA

  amdgpu:
   - add CRIU support for gem objects
   - RAS updates
   - VCN SRAM load fixes
   - EDID read fixes
   - eDP ALPM support
   - Documentation updates
   - Rework PTE flag generation
   - DCE6 fixes
   - VCN devcoredump cleanup
   - MMHUB client id fixes
   - VCN 5.0.1 RAS support
   - SMU 13.0.x updates
   - Expanded PCIe DPC support
   - Expanded VCN reset support
   - VPE per queue reset support
   - give kernel jobs unique id for tracing
   - pre-populate exported buffers
   - cyan skillfish updates
   - make vbios build number available in sysfs
   - userq updates
   - HDCP updates
   - support MMIO remap page as ttm pool
   - JPEG parser updates
   - DCE6 DC updates
   - use devm for i2c buses
   - GPUVM locking updates
   - Drop non-DC DCE11 code
   - improve fallback handling for pixel encoding

  amdkfd:
   - SVM/page migration fixes
   - debugfs fixes
   - add CRIO support for gem objects
   - SVM updates

  radeon:
   - use dev_warn_once in CS parsers

  xe:
   - add madvise interface
   - add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count
     and memory attributes
   - drop L# bank mask reporting from media GT3 on Xe3+.
   - add SLPC power_profile sysfs interface
   - add configs attribs to add post/mid context-switch commands
   - handle firmware reported hardware errors notifying userspace with
     device wedged uevent
   - use same dir structure across sysfs/debugfs
   - cleanup and future proof vram region init
   - add G-states and PCI link states to debugfs
   - Add SRIOV support for CCS surfaces on Xe2+
   - Enable SRIOV PF mode by default on supported platforms
   - move flush to common code
   - extended core workarounds for Xe2/3
   - use DRM scheduler for delayed GT TLB invalidations
   - configs improvements and allow VF device enablement
   - prep work to expose mmio regions to userspace
   - VF migration support added
   - prepare GPU SVM for THP migration
   - start fixing XE_PAGE_SIZE vs PAGE_SIZE
   - add PSMI support for hw validation
   - resize VF bars to max possible size according to number of VFs
   - Ensure GT is in C0 during resume
   - pre-populate exported buffers
   - replace xe_hmm with gpusvm
   - add more SVM GT stats to debugfs
   - improve fake pci and WA kunnit handle for new platform testing
   - Test GuC to GuC comms to add debugging
   - use attribute groups to simplify sysfs registration
   - add Late Binding firmware code to interact with MEI

  i915:
   - apply multiple JSL/EHL/Gen7/Gen6 workarounds properly
   - protect against overflow in active_engine()
   - Use try_cmpxchg64() in __active_lookup()
   - include GuC registers in error state
   - get rid of dev->struct_mutex
   - iopoll: generalize read_poll_timout
   - lots more display refactoring
   - Reject HBR3 in any eDP Panel
   - Prune modes for YUV420
   - Display Wa fix, additions, and updates
   - DP: Fix 2.7 Gbps link training on g4x
   - DP: Adjust the idle pattern handling
   - DP: Shuffle the link training code a bit
   - Don't set/read the DSI C clock divider on GLK
   - Enable_psr kernel parameter changes
   - Type-C enabled/disconnected dp-alt sink
   - Wildcat Lake enabling
   - DP HDR updates
   - DRAM detection
   - wait PSR idle on dsb commit
   - Remove FBC modulo 4 restriction for ADL-P+
   - panic: refactor framebuffer allocation

  habanalabs:
   - debug/visibility improvements
   - vmalloc-backed coherent mmap support
   - HLDIO infrastructure

  nova-core:
   - various register!() macro improvements
   - minor vbios/firmware fixes/refactoring
   - advance firmware boot stages; process Booter and patch signatures
   - process GSP and GSP bootloader
   - Add r570.144 firmware bindings and update to it
   - Move GSP boot code to own module
   - Use new pin-init features to store driver's private data in a
     single allocation
   - Update ARef import from sync::aref

  nova-drm:
   - Update ARef import from sync::aref

  tyr:
   - initial driver skeleton for a rust driver for ARM Mali GPUs
   - capable of powering up, query metadata and provide it to userspace.

  msm:
   - GPU and Core:
      - in DT bindings describe clocks per GPU type
      - GMU bandwidth voting for x1-85
      - a623/a663 speedbins
      - cleanup some remaining no-iommu leftovers after VM_BIND conversion
      - fix GEM obj 32b size truncation
      - add missing VM_BIND param validation
      - IFPC for x1-85 and a750
      - register xml and gen_header.py sync from mesa
   - Display:
      - add missing bindings for display on SC8180X
      - added DisplayPort MST bindings
      - conversion from round_rate() to determine_rate()

  amdxdna:
   - add IOCTL_AMDXDNA_GET_ARRAY
   - support user space allocated buffers
   - streamline PM interfaces
   - Refactoring wrt. hardware contexts
   - improve error reporting

  nouveau:
   - use GSP firmware by default
   - improve error reporting
   - Pre-populate exported buffers

  ast:
   - Clean up detection of DRAM config

  exynos:
   - add DSIM bridge driver support for Exynos7870
   - Document Exynos7870 DSIM compatible in dt-binding

  panthor:
   - Print task/pid on errors
   - Add support for Mali G710, G510, G310, Gx15, Gx20, Gx25
   - Improve cache flushing
   - Fail VM bind if BO has offset

  renesas:
   - convert to RUNTIME_PM_OPS

  rcar-du:
   - Make number of lanes configurable
   - Use RUNTIME_PM_OPS
   - Add support for DSI commands

  rocket:
   - Add driver for Rockchip NPU plus DT bindings
   - Use kfree() and sizeof() correctly
   - Test DMA status

  rockchip:
   - dsi2: Add support for RK3576 plus DT bindings
   - Add support for RK3588 DPTX output

  tidss:
   - Use crtc_ fields for programming display mode
   - Remove other drivers from aperture

  pixpaper:
   - Add support for Mayqueen Pixpaper plus DT bindings

  v3d:
   - Support querying nubmer of GPU resets for KHR_robustness

  stm:
   - Clean up logging
   - ltdc: Add support support for STM32MP257F-EV1 plus DT bindings

  sitronix:
   - st7571-i2c: Add support for inverted displays and 2-bit grayscale

  tidss:
   - Convert to kernel's FIELD_ macros

  vesadrm:
   - Support 8-bit palette mode

  imagination:
   - Improve power management
   - Add support for TH1520 GPU
   - Support Risc-V architectures

  v3d:
   - Improve job management and locking

  vkms:
   - Support variants of ARGB8888, ARGB16161616, RGB565, RGB888 and P01x
   - Spport YUV with 16-bit components"

* tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel: (1455 commits)
  drm/amd: Add name to modes from amdgpu_connector_add_common_modes()
  drm/amd: Drop some common modes from amdgpu_connector_add_common_modes()
  drm/amdgpu: update MODULE_PARM_DESC for freesync_video
  drm/amd: Use dynamic array size declaration for amdgpu_connector_add_common_modes()
  drm/amd/display: Share dce100_validate_global with DCE6-8
  drm/amd/display: Share dce100_validate_bandwidth with DCE6-8
  drm/amdgpu: Fix fence signaling race condition in userqueue
  amd/amdkfd: enhance kfd process check in switch partition
  amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw
  drm/amd/display: Reject modes with too high pixel clock on DCE6-10
  drm/amd: Drop unnecessary check in amdgpu_connector_add_common_modes()
  drm/amd/display: Only enable common modes for eDP and LVDS
  drm/amdgpu: remove the redeclaration of variable i
  drm/amdgpu/userq: assign an error code for invalid userq va
  drm/amdgpu: revert "rework reserved VMID handling" v2
  drm/amdgpu: remove leftover from enforcing isolation by VMID
  drm/amdgpu: Add fallback to pipe reset if KCQ ring reset fails
  accel/habanalabs: add Infineon version check
  accel/habanalabs/gaudi2: read preboot status after recovering from dirty state
  accel/habanalabs: add HL_GET_P_STATE passthrough type
  ...

Pull block updates from Jens Axboe:

 - NVMe pull request via Keith:
     - FC target fixes (Daniel)
     - Authentication fixes and updates (Martin, Chris)
     - Admin controller handling (Kamaljit)
     - Target lockdep assertions (Max)
     - Keep-alive updates for discovery (Alastair)
     - Suspend quirk (Georg)

 - MD pull request via Yu:
     - Add support for a lockless bitmap.

       A key feature for the new bitmap are that the IO fastpath is
       lockless. If a user issues lots of write IO to the same bitmap
       bit in a short time, only the first write has additional overhead
       to update bitmap bit, no additional overhead for the following
       writes.

       By supporting only resync or recover written data, means in the
       case creating new array or replacing with a new disk, there is no
       need to do a full disk resync/recovery.

 - Switch ->getgeo() and ->bios_param() to using struct gendisk rather
   than struct block_device.

 - Rust block changes via Andreas. This series adds configuration via
   configfs and remote completion to the rnull driver. The series also
   includes a set of changes to the rust block device driver API: a few
   cleanup patches, and a few features supporting the rnull changes.

   The series removes the raw buffer formatting logic from
   `kernel::block` and improves the logic available in `kernel::string`
   to support the same use as the removed logic.

 - floppy arch cleanups

 - Reduce the number of dereferencing needed for ublk commands

 - Restrict supported sockets for nbd. Mostly done to eliminate a class
   of issues perpetually reported by syzbot, by using nonsensical socket
   setups.

 - A few s390 dasd block fixes

 - Fix a few issues around atomic writes

 - Improve DMA interation for integrity requests

 - Improve how iovecs are treated with regards to O_DIRECT aligment
   constraints.

   We used to require each segment to adhere to the constraints, now
   only the request as a whole needs to.

 - Clean up and improve p2p support, enabling use of p2p for metadata
   payloads

 - Improve locking of request lookup, using SRCU where appropriate

 - Use page references properly for brd, avoiding very long RCU sections

 - Fix ordering of recursively submitted IOs

 - Clean up and improve updating nr_requests for a live device

 - Various fixes and cleanups

* tag 'for-6.18/block-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (164 commits)
  s390/dasd: enforce dma_alignment to ensure proper buffer validation
  s390/dasd: Return BLK_STS_INVAL for EINVAL from do_dasd_request
  ublk: remove redundant zone op check in ublk_setup_iod()
  nvme: Use non zero KATO for persistent discovery connections
  nvmet: add safety check for subsys lock
  nvme-core: use nvme_is_io_ctrl() for I/O controller check
  nvme-core: do ioccsz/iorcsz validation only for I/O controllers
  nvme-core: add method to check for an I/O controller
  blk-cgroup: fix possible deadlock while configuring policy
  blk-mq: fix null-ptr-deref in blk_mq_free_tags() from error path
  blk-mq: Fix more tag iteration function documentation
  selftests: ublk: fix behavior when fio is not installed
  ublk: don't access ublk_queue in ublk_unmap_io()
  ublk: pass ublk_io to __ublk_complete_rq()
  ublk: don't access ublk_queue in ublk_need_complete_req()
  ublk: don't access ublk_queue in ublk_check_commit_and_fetch()
  ublk: don't pass ublk_queue to ublk_fetch()
  ublk: don't access ublk_queue in ublk_config_io_buf()
  ublk: don't access ublk_queue in ublk_check_fetch_buf()
  ublk: pass q_id and tag to __ublk_check_and_get_req()
  ...

Pull driver core updates from Danilo Krummrich:
 "Auxiliary:
   - Drop call to dev_pm_domain_detach() in auxiliary_bus_probe()
   - Optimize logic of auxiliary_match_id()

  Rust:
   - Auxiliary:
      - Use primitive C types from prelude

   - DebugFs:
      - Add debugfs support for simple read/write files and custom
        callbacks through a File-type-based and directory-scope-based
        API
      - Sample driver code for the File-type-based API
      - Sample module code for the directory-scope-based API

   - I/O:
      - Add io::poll module and implement Rust specific
        read_poll_timeout() helper

   - IRQ:
      - Implement support for threaded and non-threaded device IRQs
        based on (&Device<Bound>, IRQ number) tuples (IrqRequest)
      - Provide &Device<Bound> cookie in IRQ handlers

   - PCI:
      - Support IRQ requests from IRQ vectors for a specific
        pci::Device<Bound>
      - Implement accessors for subsystem IDs, revision, devid and
        resource start
      - Provide dedicated pci::Vendor and pci::Class types for vendor
        and class ID numbers
      - Implement Display to print actual vendor and class names; Debug
        to print the raw ID numbers
      - Add pci::DeviceId::from_class_and_vendor() helper
      - Use primitive C types from prelude
      - Various minor inline and (safety) comment improvements

   - Platform:
      - Support IRQ requests from IRQ vectors for a specific
        platform::Device<Bound>

   - Nova:
      - Use pci::DeviceId::from_class_and_vendor() to avoid probing
        non-display/compute PCI functions

   - Misc:
      - Add helper for cpu_relax()
      - Update ARef import from sync::aref

  sysfs:
   - Remove bin_attrs_new field from struct attribute_group
   - Remove read_new() and write_new() from struct bin_attribute

  Misc:
   - Document potential race condition in get_dev_from_fwnode()
   - Constify node_group argument in software node registration
     functions
   - Fix order of kernel-doc parameters in various functions
   - Set power.no_pm flag for faux devices
   - Set power.no_callbacks flag along with the power.no_pm flag
   - Constify the pmu_bus bus type
   - Minor spelling fixes"

* tag 'driver-core-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (43 commits)
  rust: pci: display symbolic PCI vendor names
  rust: pci: display symbolic PCI class names
  rust: pci: fix incorrect platform reference in PCI driver probe doc comment
  rust: pci: fix incorrect platform reference in PCI driver unbind doc comment
  perf: make pmu_bus const
  samples: rust: Add scoped debugfs sample driver
  rust: debugfs: Add support for scoped directories
  samples: rust: Add debugfs sample driver
  rust: debugfs: Add support for callback-based files
  rust: debugfs: Add support for writable files
  rust: debugfs: Add support for read-only files
  rust: debugfs: Add initial support for directories
  driver core: auxiliary bus: Optimize logic of auxiliary_match_id()
  driver core: auxiliary bus: Drop dev_pm_domain_detach() call
  driver core: Fix order of the kernel-doc parameters
  driver core: get_dev_from_fwnode(): document potential race
  drivers: base: fix "publically"->"publicly"
  driver core/PM: Set power.no_callbacks along with power.no_pm
  driver core: faux: Set power.no_pm for faux devices
  rust: pci: inline several tiny functions
  ...

The rust USB bindings as submitted are a good start, but they don't
really seem to be correct in a number of minor places, so just disable
them from the build entirely at this point in time.  When they are ready
to be re-enabled, this commit can be reverted.

Acked-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In light of the newly-added Rust abstractions for USB devices and
drivers, add a sample USB rust driver that serves both to showcase what
is currently supported, as well as be the only user of the USB
abstractions for now.

Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250825-b4-usb-v1-2-7aa024de7ae8@collabora.com
[ force USB = y for now - gregkh ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Prepare for `core::ffi::CStr` taking the place of `kernel::str::CStr` by
avoid methods that only exist on the latter.

Also avoid `Deref<Target=BStr> for CStr` as that impl doesn't exist on
`core::ffi::CStr`.

Link: https://github.com/Rust-for-Linux/linux/issues/1075
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Acked-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>

pin-init changes for v6.18

Changed:

- `#[pin_data]` now generates a `*Projection` struct similar to the
  `pin-project` crate.

- Add initializer code blocks to `[try_][pin_]init!` macros: make
  initializer macros accept any number of `_: {/* arbitrary code */},` &
  make them run the code at that point.

- Make the `[try_][pin_]init!` macros expose initialized fields via a
  `let` binding as `&mut T` or `Pin<&mut T>` for later fields.

Upstream dev news:

- Released v0.0.10 before the changes included in this tag.

- Inform users of the impending rename from `pinned-init` to `pin-init`
  (in the kernel the rename already happened).

- More CI improvements.

Signed-off-by: Danilo Krummrich <dakr@kernel.org>

From: Benno Lossin <lossin@kernel.org>
Link: https://lore.kernel.org/r/20250912174148.373530-1-lossin@kernel.org

After initializing a field in an initializer macro, create a variable
holding a reference that points at that field. The type is either
`Pin<&mut T>` or `&mut T` depending on the field's structural pinning
kind.

[ Applied fixes to devres and rust_driver_pci sample - Benno]
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Benno Lossin <lossin@kernel.org>