This log message was accidentally chopped off.
I was wondering why this happened, but checking the ML log, Mark
precisely followed my suggestion [1].
I just used "..." because I was too lazy to type the sentence fully.
Sorry for the confusion.
[1]: https://lore.kernel.org/all/CAK7LNAR6bXXk9-ZzZYpTqzFqdYbQsZHmiWspu27rtsFxvfRuVA@mail.gmail.com/
Fixes: 4a6795933a89 ("kbuild: modpost: Explicitly warn about unprototyped symbols")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Pull x86 CET-IBT (Control-Flow-Integrity) support from Peter Zijlstra: "Add support for Intel CET-IBT, available since Tigerlake (11th gen), which is a coarse grained, hardware based, forward edge Control-Flow-Integrity mechanism where any indirect CALL/JMP must target an ENDBR instruction or suffer #CP. Additionally, since Alderlake (12th gen)/Sapphire-Rapids, speculation is limited to 2 instructions (and typically fewer) on branch targets not starting with ENDBR. CET-IBT also limits speculation of the next sequential instruction after the indirect CALL/JMP [1]. CET-IBT is fundamentally incompatible with retpolines, but provides, as described above, speculation limits itself" [1] https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/branch-history-injection.html * tag 'x86_core_for_5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits) kvm/emulate: Fix SETcc emulation for ENDBR x86/Kconfig: Only allow CONFIG_X86_KERNEL_IBT with ld.lld >= 14.0.0 x86/Kconfig: Only enable CONFIG_CC_HAS_IBT for clang >= 14.0.0 kbuild: Fixup the IBT kbuild changes x86/Kconfig: Do not allow CONFIG_X86_X32_ABI=y with llvm-objcopy x86: Remove toolchain check for X32 ABI capability x86/alternative: Use .ibt_endbr_seal to seal indirect calls objtool: Find unused ENDBR instructions objtool: Validate IBT assumptions objtool: Add IBT/ENDBR decoding objtool: Read the NOENDBR annotation x86: Annotate idtentry_df() x86,objtool: Move the ASM_REACHABLE annotation to objtool.h x86: Annotate call_on_stack() objtool: Rework ASM_REACHABLE x86: Mark __invalid_creds() __noreturn exit: Mark do_group_exit() __noreturn x86: Mark stop_this_cpu() __noreturn objtool: Ignore extra-symbol code objtool: Rename --duplicate to --lto ...
Pull Kbuild update for C11 language base from Masahiro Yamada: "Kbuild -std=gnu11 updates for v5.18 Linus pointed out the benefits of C99 some years ago, especially variable declarations in loops [1]. At that time, we were not ready for the migration due to old compilers. Recently, Jakob Koschel reported a bug in list_for_each_entry(), which leaks the invalid pointer out of the loop [2]. In the discussion, we agreed that the time had come. Now that GCC 5.1 is the minimum compiler version, there is nothing to prevent us from going to -std=gnu99, or even straight to -std=gnu11. Discussions for a better list iterator implementation are ongoing, but this patch set must land first" [1] https://lore.kernel.org/all/CAHk-=wgr12JkKmRd21qh-se-_Gs69kbPgR9x4C+Es-yJV2GLkA@mail.gmail.com/ [2] https://lore.kernel.org/lkml/86C4CE7D-6D93-456B-AA82-F8ADEACA40B7@gmail.com/ * tag 'kbuild-gnu11-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: Kbuild: use -std=gnu11 for KBUILD_USERCFLAGS Kbuild: move to -std=gnu11 Kbuild: use -Wdeclaration-after-statement Kbuild: add -Wno-shift-negative-value where -Wextra is used
Masahiro-san deemed my kbuild changes to support whole module objtool runs too terrible to live and gracefully provided an alternative. Suggested-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/CAK7LNAQ2mYMnOKMQheVi+6byUFE3KEkjm1zcndNUfe0tORGvug@mail.gmail.com
The kernel is moving from using `-std=gnu89` to `-std=gnu11`, permitting the use of additional C11 features such as for-loop initial declarations. One contentious aspect of C99 is that it permits mixed declarations and code, and for now at least, it seems preferable to enforce that declarations must come first. These warnings were already enabled in the kernel itself, but not for KBUILD_USERCFLAGS or the compat VDSO on arch/arm64, which uses a separate set of CFLAGS. This patch fixes an existing violation in modpost.c, which is not reported because of the missing flag in KBUILD_USERCFLAGS: | scripts/mod/modpost.c: In function ‘match’: | scripts/mod/modpost.c:837:3: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement] | 837 | const char *endp = p + strlen(p) - 1; | | ^~~~~ Signed-off-by: Mark Rutland <mark.rutland@arm.com> [arnd: don't add a duplicate flag to the default set, update changelog] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 (x86-64) Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently with -mindirect-branch=thunk and -mfunction-return=thunk compiler options expoline thunks are put into individual COMDAT group sections. s390 is the only architecture which has group sections and it has implications for kpatch and objtool tools support. Using -mindirect-branch=thunk-extern and -mfunction-return=thunk-extern is an alternative, which comes with a need to generate all required expoline thunks manually. Unfortunately modules area is too far away from the kernel image, and expolines from the kernel image cannon be used. But since all new distributions (except Debian) build kernels for machine generations newer than z10, where "exrl" instruction is available, that leaves only 16 expolines thunks possible. Provide an option to build the kernel with -mindirect-branch=thunk-extern and -mfunction-return=thunk-extern for z10 or newer. This also requires to postlink expoline thunks into all modules explicitly. Currently modules already contain most expolines anyhow. Unfortunately -mindirect-branch=thunk-extern and -mfunction-return=thunk-extern options support is broken in gcc <= 11.2. Additional compile test is required to verify proper gcc support. Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Co-developed-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Pull RISC-V updates from Palmer Dabbelt: - Support for the DA9063 as used on the HiFive Unmatched. - Support for relative extables, which puts us in line with other architectures and save some space in vmlinux. - A handful of kexec fixes/improvements, including the ability to run crash kernels from PCI-addressable memory on the HiFive Unmatched. - Support for the SBI SRST extension, which allows systems that do not have an explicit driver in Linux to reboot. - A handful of fixes and cleanups, including to the defconfigs and device trees. * tag 'riscv-for-linus-5.17-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (52 commits) RISC-V: Use SBI SRST extension when available riscv: mm: fix wrong phys_ram_base value for RV64 RISC-V: Use common riscv_cpuid_to_hartid_mask() for both SMP=y and SMP=n riscv: head: remove useless __PAGE_ALIGNED_BSS and .balign riscv: errata: alternative: mark vendor_patch_func __initdata riscv: head: make secondary_start_common() static riscv: remove cpu_stop() riscv: try to allocate crashkern region from 32bit addressible memory riscv: use hart id instead of cpu id on machine_kexec riscv: Don't use va_pa_offset on kdump riscv: dts: sifive: fu540-c000: Fix PLIC node riscv: dts: sifive: fu540-c000: Drop bogus soc node compatible values riscv: dts: sifive: Group tuples in register properties riscv: dts: sifive: Group tuples in interrupt properties riscv: dts: microchip: mpfs: Group tuples in interrupt properties riscv: dts: microchip: mpfs: Fix clock controller node riscv: dts: microchip: mpfs: Fix reference clock node riscv: dts: microchip: mpfs: Fix PLIC node riscv: dts: microchip: mpfs: Drop empty chosen node riscv: dts: canaan: Group tuples in interrupt properties ...
Similar as other architectures such as arm64, x86 and so on, use
offsets relative to the exception table entry values rather than
absolute addresses for both the exception locationand the fixup.
However, RISCV label difference will actually produce two relocations,
a pair of R_RISCV_ADD32 and R_RISCV_SUB32. Take below simple code for
example:
$ cat test.S
.section .text
1:
nop
.section __ex_table,"a"
.balign 4
.long (1b - .)
.previous
$ riscv64-linux-gnu-gcc -c test.S
$ riscv64-linux-gnu-readelf -r test.o
Relocation section '.rela__ex_table' at offset 0x100 contains 2 entries:
Offset Info Type Sym. Value Sym. Name + Addend
000000000000 000600000023 R_RISCV_ADD32 0000000000000000 .L1^B1 + 0
000000000000 000500000027 R_RISCV_SUB32 0000000000000000 .L0 + 0
The modpost will complain the R_RISCV_SUB32 relocation, so we need to
patch modpost.c to skip this relocation for .rela__ex_table section.
After this patch, the __ex_table section size of defconfig vmlinux is
reduced from 7072 Bytes to 3536 Bytes.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This allows to selectively autoload drivers for ISH devices. Currently all ISH drivers are loaded for all systems having any ISH device. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull Kbuild updates from Masahiro Yamada: - Add -s option (strict mode) to merge_config.sh to make it fail when any symbol is redefined. - Show a warning if a different compiler is used for building external modules. - Infer --target from ARCH for CC=clang to let you cross-compile the kernel without CROSS_COMPILE. - Make the integrated assembler default (LLVM_IAS=1) for CC=clang. - Add <linux/stdarg.h> to the kernel source instead of borrowing <stdarg.h> from the compiler. - Add Nick Desaulniers as a Kbuild reviewer. - Drop stale cc-option tests. - Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG to handle symbols in inline assembly. - Show a warning if 'FORCE' is missing for if_changed rules. - Various cleanups * tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits) kbuild: redo fake deps at include/ksym/*.h kbuild: clean up objtool_args slightly modpost: get the *.mod file path more simply checkkconfigsymbols.py: Fix the '--ignore' option kbuild: merge vmlinux_link() between ARCH=um and other architectures kbuild: do not remove 'linux' link in scripts/link-vmlinux.sh kbuild: merge vmlinux_link() between the ordinary link and Clang LTO kbuild: remove stale *.symversions kbuild: remove unused quiet_cmd_update_lto_symversions gen_compile_commands: extract compiler command from a series of commands x86: remove cc-option-yn test for -mtune= arc: replace cc-option-yn uses with cc-option s390: replace cc-option-yn uses with cc-option ia64: move core-y in arch/ia64/Makefile to arch/ia64/Kbuild sparc: move the install rule to arch/sparc/Makefile security: remove unneeded subdir-$(CONFIG_...) kbuild: sh: remove unused install script kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y kbuild: Switch to 'f' variants of integrated assembler flag kbuild: Shuffle blank line to improve comment meaning ...