Pull Char/Misc updates from Greg KH:
 "Here is the big set of char/misc and other driver subsystem updates
  for 6.5-rc1.

  Lots of different, tiny, stuff in here, from a range of smaller driver
  subsystems, including pulls from some substems directly:

   - IIO driver updates and additions

   - W1 driver updates and fixes (and a new maintainer!)

   - FPGA driver updates and fixes

   - Counter driver updates

   - Extcon driver updates

   - Interconnect driver updates

   - Coresight driver updates

   - mfd tree tag merge needed for other updates on top of that, lots of
     small driver updates as patches, including:

   - static const updates for class structures

   - nvmem driver updates

   - pcmcia driver fix

   - lots of other small driver updates and fixes

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'char-misc-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (243 commits)
  bsr: fix build problem with bsr_class static cleanup
  comedi: make all 'class' structures const
  char: xillybus: make xillybus_class a static const structure
  xilinx_hwicap: make icap_class a static const structure
  virtio_console: make port class a static const structure
  ppdev: make ppdev_class a static const structure
  char: misc: make misc_class a static const structure
  /dev/mem: make mem_class a static const structure
  char: lp: make lp_class a static const structure
  dsp56k: make dsp56k_class a static const structure
  bsr: make bsr_class a static const structure
  oradax: make 'cl' a static const structure
  hwtracing: hisi_ptt: Fix potential sleep in atomic context
  hwtracing: hisi_ptt: Advertise PERF_PMU_CAP_NO_EXCLUDE for PTT PMU
  hwtracing: hisi_ptt: Export available filters through sysfs
  hwtracing: hisi_ptt: Add support for dynamically updating the filter list
  hwtracing: hisi_ptt: Factor out filter allocation and release operation
  samples: pfsm: add CC_CAN_LINK dependency
  misc: fastrpc: check return value of devm_kasprintf()
  coresight: dummy: Update type of mode parameter in dummy_{sink,source}_enable()
  ...

Use grep instead of sed for all compiled sources generation, it is three
times more efficient.

Signed-off-by: Jialu Xu <xujialu@vimux.org>
Tested-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20230601010402.71040-1-xujialu@vimux.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gtags considers any file outside of its current working directory
"outside the source tree" and refuses to index it. For O= kernel builds,
or when "make" is invoked from a directory other then the kernel source
tree, gtags ignores the entire kernel source and generates an empty
index.

Force-set gtags current working directory to the kernel source tree.

Due to commit 9da0763bdd82 ("kbuild: Use relative path when building in
a subdir of the source tree"), if the kernel build is done in a
sub-directory of the kernel source tree, the kernel Makefile will set
the kernel's $srctree to ".." for shorter compile-time and run-time
warnings. Consequently, the list of files to be indexed will be in the
"../*" form, rendering all such paths invalid once gtags switches to the
kernel source tree as its current working directory.

If gtags indexing is requested and the build directory is not the kernel
source tree, index all files in absolute-path form.

Note, indexing in absolute-path form will not affect the generated
index, as paths in gtags indices are always relative to the gtags "root
directory" anyway (as evidenced by "gtags --dump").

Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Pull Kbuild updates from Masahiro Yamada:

 - Change V=1 option to print both short log and full command log

 - Allow V=1 and V=2 to be combined as V=12

 - Make W=1 detect wrong .gitignore files

 - Tree-wide cleanups for unused command line arguments passed to Clang

 - Stop using -Qunused-arguments with Clang

 - Make scripts/setlocalversion handle only correct release tags instead
   of any arbitrary annotated tag

 - Create Debian and RPM source packages without cleaning the source
   tree

 - Various cleanups for packaging

* tag 'kbuild-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (74 commits)
  kbuild: rpm-pkg: remove unneeded KERNELRELEASE from modules/headers_install
  docs: kbuild: remove description of KBUILD_LDS_MODULE
  .gitattributes: use 'dts' diff driver for *.dtso files
  kbuild: deb-pkg: improve the usability of source package
  kbuild: deb-pkg: fix binary-arch and clean in debian/rules
  kbuild: tar-pkg: use tar rules in scripts/Makefile.package
  kbuild: make perf-tar*-src-pkg work without relying on git
  kbuild: deb-pkg: switch over to source format 3.0 (quilt)
  kbuild: deb-pkg: make .orig tarball a hard link if possible
  kbuild: deb-pkg: hide KDEB_SOURCENAME from Makefile
  kbuild: srcrpm-pkg: create source package without cleaning
  kbuild: rpm-pkg: build binary packages from source rpm
  kbuild: deb-pkg: create source package without cleaning
  kbuild: add a tool to list files ignored by git
  Documentation/llvm: add Chimera Linux, Google and Meta datacenters
  setlocalversion: use only the correct release tag for git-describe
  setlocalversion: clean up the construction of version output
  .gitignore: ignore *.cover and *.mbx
  kbuild: remove --include-dir MAKEFLAG from top Makefile
  kbuild: fix trivial typo in comment
  ...

Pull char/misc and other driver subsystem updates from Greg KH:
 "Here is the large set of driver changes for char/misc drivers and
  other smaller driver subsystems that flow through this git tree.

  Included in here are:

   - New IIO drivers and features and improvments in that subsystem

   - New hwtracing drivers and additions to that subsystem

   - lots of interconnect changes and new drivers as that subsystem
     seems under very active development recently. This required also
     merging in the icc subsystem changes through this tree.

   - FPGA driver updates

   - counter subsystem and driver updates

   - MHI driver updates

   - nvmem driver updates

   - documentation updates

   - Other smaller driver updates and fixes, full details in the
     shortlog

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (223 commits)
  scripts/tags.sh: fix incompatibility with PCRE2
  firmware: coreboot: Remove GOOGLE_COREBOOT_TABLE_ACPI/OF Kconfig entries
  mei: lower the log level for non-fatal failed messages
  mei: bus: disallow driver match while dismantling device
  misc: vmw_balloon: fix memory leak with using debugfs_lookup()
  nvmem: stm32: fix OPTEE dependency
  dt-bindings: nvmem: qfprom: add IPQ8074 compatible
  nvmem: qcom-spmi-sdam: register at device init time
  nvmem: rave-sp-eeprm: fix kernel-doc bad line warning
  nvmem: stm32: detect bsec pta presence for STM32MP15x
  nvmem: stm32: add OP-TEE support for STM32MP13x
  nvmem: core: use nvmem_add_one_cell() in nvmem_add_cells_from_of()
  nvmem: core: add nvmem_add_one_cell()
  nvmem: core: drop the removal of the cells in nvmem_add_cells()
  nvmem: core: move struct nvmem_cell_info to nvmem-provider.h
  nvmem: core: add an index parameter to the cell
  of: property: add #nvmem-cell-cells property
  of: property: make #.*-cells optional for simple props
  of: base: add of_parse_phandle_with_optional_args()
  net: add helper eth_addr_add()
  ...

Starting with release 10.38 PCRE2 drops default support for using \K in
lookaround patterns as described in [1]. Unfortunately, scripts/tags.sh
relies on such functionality to collect all_compiled_soures() leading to
the following error:

  $ make COMPILED_SOURCE=1 tags
    GEN     tags
  grep: \K is not allowed in lookarounds (but see PCRE2_EXTRA_ALLOW_LOOKAROUND_BSK)

The usage of \K for this pattern was introduced in commit 4f491bb6ea2a
("scripts/tags.sh: collect compiled source precisely") which speeds up
the generation of tags significantly.

In order to fix this issue without compromising the performance we can
switch over to an equivalent sed expression. The same matching pattern
is preserved here except \K is replaced with a backreference \1.

[1] https://www.pcre.org/current/doc/html/pcre2syntax.html#SEC11

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Jialu Xu <xujialu@vimux.org>
Cc: Vipin Sharma <vipinsh@google.com>
Cc: stable@vger.kernel.org
Fixes: 4f491bb6ea2a ("scripts/tags.sh: collect compiled source precisely")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20230215183850.3353198-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Kconfig language has already been built-in in the latest ctags, so it
would error exit if we try to define it as an user-defined language via
'--langdef=kconfig'.  This results that there is no Kconfig tags in the
final tag file.  Fix this by skipping the user Kconfig definition for the
latest ctags.

Link: https://lkml.kernel.org/r/20230128064916.912744-1-haokexin@gmail.com
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com>
Cc: Vipin Sharma <vipinsh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Commit a6de553da01c ("kbuild: Allow to combine multiple W= levels")
supported W=123 to enable all the extra warning groups.

I think a similar idea is applicable to the V= option.

  V=1 echos the whole command
  V=2 prints the reason for rebuilding

These are orthogonal, and can be enabled at the same time.

This commit supports V=12 to enable both of them.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>

It's common for drivers that share same physical components to also
duplicate source code (or at least portions of it). A good example is
both drivers/gpu/drm/amdgpu/* and drivers/gpu/drm/radeon/* have a header
file called atombios.h.

While their contents aren't the same, a lot of their structs have
the exact same names which makes navigating through the code base a bit
messy as cscope will show up 'references' across drivers which aren't
exactly correct.

Add IGNORE_DIRS variable, which specifies which directories
to be ignored from indexing.

Example:
        make ARCH=x86 IGNORE_DIRS="drivers/gpu/drm/radeon tools" cscope

Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Vipin Sharma <vipinsh@google.com>
Link: https://lore.kernel.org/r/Y5jf59VCL/HAt60q@mail.google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add tools directory in generating tags and quiet the "No such file or
directory" warnings.

It reverts the changes introduced in commit 162343a876f1
("scripts/tags.sh: exclude tools directory from tags generation") while
maintainig the original intent of the patch to get rid of the warnings.
This allows the root level cscope files to include tools source code
besides kernel and a single place to browse the code for both.

Acked-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Link: https://lore.kernel.org/r/20220618005457.2379324-1-vipinsh@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>