linux.git/security, branch v3.10.103

KEYS: potential uninitialized variable

2016-08-21T21:22:36+00:00

commit 38327424b40bcebe2de92d07312c89360ac9229a upstream.

If __key_link_begin() failed then "edit" would be uninitialized.  I've
added a check to fix that.

This allows a random user to crash the kernel, though it's quite
difficult to achieve.  There are three ways it can be done as the user
would have to cause an error to occur in __key_link():

 (1) Cause the kernel to run out of memory.  In practice, this is difficult
     to achieve without ENOMEM cropping up elsewhere and aborting the
     attempt.

 (2) Revoke the destination keyring between the keyring ID being looked up
     and it being tested for revocation.  In practice, this is difficult to
     time correctly because the KEYCTL_REJECT function can only be used
     from the request-key upcall process.  Further, users can only make use
     of what's in /sbin/request-key.conf, though this does including a
     rejection debugging test - which means that the destination keyring
     has to be the caller's session keyring in practice.

 (3) Have just enough key quota available to create a key, a new session
     keyring for the upcall and a link in the session keyring, but not then
     sufficient quota to create a link in the nominated destination keyring
     so that it fails with EDQUOT.

The bug can be triggered using option (3) above using something like the
following:

	echo 80 >/proc/sys/kernel/keys/root_maxbytes
	keyctl request2 user debug:fred negate @t

The above sets the quota to something much lower (80) to make the bug
easier to trigger, but this is dependent on the system.  Note also that
the name of the keyring created contains a random number that may be
between 1 and 10 characters in size, so may throw the test off by
changing the amount of quota used.

Assuming the failure occurs, something like the following will be seen:

	kfree_debugcheck: out of range ptr 6b6b6b6b6b6b6b68h
	------------[ cut here ]------------
	kernel BUG at ../mm/slab.c:2821!
	...
	RIP: 0010:[] kfree_debugcheck+0x20/0x25
	RSP: 0018:ffff8804014a7de8  EFLAGS: 00010092
	RAX: 0000000000000034 RBX: 6b6b6b6b6b6b6b68 RCX: 0000000000000000
	RDX: 0000000000040001 RSI: 00000000000000f6 RDI: 0000000000000300
	RBP: ffff8804014a7df0 R08: 0000000000000001 R09: 0000000000000000
	R10: ffff8804014a7e68 R11: 0000000000000054 R12: 0000000000000202
	R13: ffffffff81318a66 R14: 0000000000000000 R15: 0000000000000001
	...
	Call Trace:
	  kfree+0xde/0x1bc
	  assoc_array_cancel_edit+0x1f/0x36
	  __key_link_end+0x55/0x63
	  key_reject_and_link+0x124/0x155
	  keyctl_reject_key+0xb6/0xe0
	  keyctl_negate_key+0x10/0x12
	  SyS_keyctl+0x9f/0xe7
	  do_syscall_64+0x63/0x13a
	  entry_SYSCALL64_slow_path+0x25/0x25

CVE-2016-4470

Fixes: f70e2e06196a ('KEYS: Do preallocation for __key_link()')
Signed-off-by: Dan Carpenter 
Signed-off-by: David Howells 
cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds 
[ciwillia@brocade.com: backported to 3.10: adjusted context]
Signed-off-by: Charles (Chas) Williams 
Signed-off-by: Willy Tarreau

ptrace: use fsuid, fsgid, effective creds for fs access checks

2016-02-25T19:57:47+00:00

commit caaee6234d05a58c5b4d05e7bf766131b810a657 upstream.

By checking the effective credentials instead of the real UID / permitted
capabilities, ensure that the calling process actually intended to use its
credentials.

To ensure that all ptrace checks use the correct caller credentials (e.g.
in case out-of-tree code or newly added code omits the PTRACE_MODE_*CREDS
flag), use two new flags and require one of them to be set.

The problem was that when a privileged task had temporarily dropped its
privileges, e.g.  by calling setreuid(0, user_uid), with the intent to
perform following syscalls with the credentials of a user, it still passed
ptrace access checks that the user would not be able to pass.

While an attacker should not be able to convince the privileged task to
perform a ptrace() syscall, this is a problem because the ptrace access
check is reused for things in procfs.

In particular, the following somewhat interesting procfs entries only rely
on ptrace access checks:

 /proc/$pid/stat - uses the check for determining whether pointers
     should be visible, useful for bypassing ASLR
 /proc/$pid/maps - also useful for bypassing ASLR
 /proc/$pid/cwd - useful for gaining access to restricted
     directories that contain files with lax permissions, e.g. in
     this scenario:
     lrwxrwxrwx root root /proc/13020/cwd -> /root/foobar
     drwx------ root root /root
     drwxr-xr-x root root /root/foobar
     -rw-r--r-- root root /root/foobar/secret

Therefore, on a system where a root-owned mode 6755 binary changes its
effective credentials as described and then dumps a user-specified file,
this could be used by an attacker to reveal the memory layout of root's
processes or reveal the contents of files he is not allowed to access
(through /proc/$pid/cwd).

[akpm@linux-foundation.org: fix warning]
Signed-off-by: Jann Horn 
Acked-by: Kees Cook 
Cc: Casey Schaufler 
Cc: Oleg Nesterov 
Cc: Ingo Molnar 
Cc: James Morris 
Cc: "Serge E. Hallyn" 
Cc: Andy Shevchenko 
Cc: Andy Lutomirski 
Cc: Al Viro 
Cc: "Eric W. Biederman" 
Cc: Willy Tarreau 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

KEYS: Fix keyring ref leak in join_session_keyring()

2016-01-23T03:47:57+00:00

commit 23567fd052a9abb6d67fe8e7a9ccdd9800a540f2 upstream.

This fixes CVE-2016-0728.

If a thread is asked to join as a session keyring the keyring that's already
set as its session, we leak a keyring reference.

This can be tested with the following program:

	#include 
	#include 
	#include 
	#include 

	int main(int argc, const char *argv[])
	{
		int i = 0;
		key_serial_t serial;

		serial = keyctl(KEYCTL_JOIN_SESSION_KEYRING,
				"leaked-keyring");
		if (serial < 0) {
			perror("keyctl");
			return -1;
		}

		if (keyctl(KEYCTL_SETPERM, serial,
			   KEY_POS_ALL | KEY_USR_ALL) < 0) {
			perror("keyctl");
			return -1;
		}

		for (i = 0; i < 100; i++) {
			serial = keyctl(KEYCTL_JOIN_SESSION_KEYRING,
					"leaked-keyring");
			if (serial < 0) {
				perror("keyctl");
				return -1;
			}
		}

		return 0;
	}

If, after the program has run, there something like the following line in
/proc/keys:

3f3d898f I--Q---   100 perm 3f3f0000     0     0 keyring   leaked-keyring: empty

with a usage count of 100 * the number of times the program has been run,
then the kernel is malfunctioning.  If leaked-keyring has zero usages or
has been garbage collected, then the problem is fixed.

Reported-by: Yevgeny Pats 
Signed-off-by: David Howells 
Acked-by: Don Zickus 
Acked-by: Prarit Bhargava 
Acked-by: Jarod Wilson 
Signed-off-by: James Morris 
Signed-off-by: Greg Kroah-Hartman

KEYS: Fix race between read and revoke

2016-01-23T03:47:56+00:00

commit b4a1b4f5047e4f54e194681125c74c0aa64d637d upstream.

This fixes CVE-2015-7550.

There's a race between keyctl_read() and keyctl_revoke().  If the revoke
happens between keyctl_read() checking the validity of a key and the key's
semaphore being taken, then the key type read method will see a revoked key.

This causes a problem for the user-defined key type because it assumes in
its read method that there will always be a payload in a non-revoked key
and doesn't check for a NULL pointer.

Fix this by making keyctl_read() check the validity of a key after taking
semaphore instead of before.

I think the bug was introduced with the original keyrings code.

This was discovered by a multithreaded test program generated by syzkaller
(http://github.com/google/syzkaller).  Here's a cleaned up version:

	#include 
	#include 
	#include 
	void *thr0(void *arg)
	{
		key_serial_t key = (unsigned long)arg;
		keyctl_revoke(key);
		return 0;
	}
	void *thr1(void *arg)
	{
		key_serial_t key = (unsigned long)arg;
		char buffer[16];
		keyctl_read(key, buffer, 16);
		return 0;
	}
	int main()
	{
		key_serial_t key = add_key("user", "%", "foo", 3, KEY_SPEC_USER_KEYRING);
		pthread_t th[5];
		pthread_create(&th[0], 0, thr0, (void *)(unsigned long)key);
		pthread_create(&th[1], 0, thr1, (void *)(unsigned long)key);
		pthread_create(&th[2], 0, thr0, (void *)(unsigned long)key);
		pthread_create(&th[3], 0, thr1, (void *)(unsigned long)key);
		pthread_join(th[0], 0);
		pthread_join(th[1], 0);
		pthread_join(th[2], 0);
		pthread_join(th[3], 0);
		return 0;
	}

Build as:

	cc -o keyctl-race keyctl-race.c -lkeyutils -lpthread

Run as:

	while keyctl-race; do :; done

as it may need several iterations to crash the kernel.  The crash can be
summarised as:

	BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
	IP: [] user_read+0x56/0xa3
	...
	Call Trace:
	 [] keyctl_read_key+0xb6/0xd7
	 [] SyS_keyctl+0x83/0xe0
	 [] entry_SYSCALL_64_fastpath+0x12/0x6f

Reported-by: Dmitry Vyukov 
Signed-off-by: David Howells 
Tested-by: Dmitry Vyukov 
Signed-off-by: James Morris 
Signed-off-by: Greg Kroah-Hartman

KEYS: Fix crash when attempt to garbage collect an uninstantiated keyring

2016-01-23T03:47:56+00:00

commit f05819df10d7b09f6d1eb6f8534a8f68e5a4fe61 upstream.

The following sequence of commands:

    i=`keyctl add user a a @s`
    keyctl request2 keyring foo bar @t
    keyctl unlink $i @s

tries to invoke an upcall to instantiate a keyring if one doesn't already
exist by that name within the user's keyring set.  However, if the upcall
fails, the code sets keyring->type_data.reject_error to -ENOKEY or some
other error code.  When the key is garbage collected, the key destroy
function is called unconditionally and keyring_destroy() uses list_empty()
on keyring->type_data.link - which is in a union with reject_error.
Subsequently, the kernel tries to unlink the keyring from the keyring names
list - which oopses like this:

	BUG: unable to handle kernel paging request at 00000000ffffff8a
	IP: [] keyring_destroy+0x3d/0x88
	...
	Workqueue: events key_garbage_collector
	...
	RIP: 0010:[] keyring_destroy+0x3d/0x88
	RSP: 0018:ffff88003e2f3d30  EFLAGS: 00010203
	RAX: 00000000ffffff82 RBX: ffff88003bf1a900 RCX: 0000000000000000
	RDX: 0000000000000000 RSI: 000000003bfc6901 RDI: ffffffff81a73a40
	RBP: ffff88003e2f3d38 R08: 0000000000000152 R09: 0000000000000000
	R10: ffff88003e2f3c18 R11: 000000000000865b R12: ffff88003bf1a900
	R13: 0000000000000000 R14: ffff88003bf1a908 R15: ffff88003e2f4000
	...
	CR2: 00000000ffffff8a CR3: 000000003e3ec000 CR4: 00000000000006f0
	...
	Call Trace:
	 [] key_gc_unused_keys.constprop.1+0x5d/0x10f
	 [] key_garbage_collector+0x1fa/0x351
	 [] process_one_work+0x28e/0x547
	 [] worker_thread+0x26e/0x361
	 [] ? rescuer_thread+0x2a8/0x2a8
	 [] kthread+0xf3/0xfb
	 [] ? kthread_create_on_node+0x1c2/0x1c2
	 [] ret_from_fork+0x3f/0x70
	 [] ? kthread_create_on_node+0x1c2/0x1c2

Note the value in RAX.  This is a 32-bit representation of -ENOKEY.

The solution is to only call ->destroy() if the key was successfully
instantiated.

Reported-by: Dmitry Vyukov 
Signed-off-by: David Howells 
Tested-by: Dmitry Vyukov 
Signed-off-by: Greg Kroah-Hartman

KEYS: Fix race between key destruction and finding a keyring by name

2016-01-23T03:47:56+00:00

commit 94c4554ba07adbdde396748ee7ae01e86cf2d8d7 upstream.

There appears to be a race between:

 (1) key_gc_unused_keys() which frees key->security and then calls
     keyring_destroy() to unlink the name from the name list

 (2) find_keyring_by_name() which calls key_permission(), thus accessing
     key->security, on a key before checking to see whether the key usage is 0
     (ie. the key is dead and might be cleaned up).

Fix this by calling ->destroy() before cleaning up the core key data -
including key->security.

Reported-by: Petr Matousek 
Signed-off-by: David Howells 
Signed-off-by: Greg Kroah-Hartman

move d_rcu from overlapping d_child to overlapping d_alias

2015-04-29T08:34:00+00:00

commit 946e51f2bf37f1656916eb75bd0742ba33983c28 upstream.

Signed-off-by: Al Viro 
Cc: Ben Hutchings 
[hujianyang: Backported to 3.10 refer to the work of Ben Hutchings in 3.2:
 - Apply name changes in all the different places we use d_alias and d_child
 - Move the WARN_ON() in __d_free() to d_free() as we don't have dentry_free()]
Signed-off-by: hujianyang 
Signed-off-by: Greg Kroah-Hartman

selinux: fix sel_write_enforce broken return value

2015-04-19T08:10:46+00:00

commit 6436a123a147db51a0b06024a8350f4c230e73ff upstream.

Return a negative error value like the rest of the entries in this function.

Signed-off-by: Joe Perches 
Acked-by:  Stephen Smalley 
[PM: tweaked subject line]
Signed-off-by: Paul Moore 
Signed-off-by: Greg Kroah-Hartman

KEYS: close race between key lookup and freeing

2015-01-30T01:40:56+00:00

commit a3a8784454692dd72e5d5d34dcdab17b4420e74c upstream.

When a key is being garbage collected, it's key->user would get put before
the ->destroy() callback is called, where the key is removed from it's
respective tracking structures.

This leaves a key hanging in a semi-invalid state which leaves a window open
for a different task to try an access key->user. An example is
find_keyring_by_name() which would dereference key->user for a key that is
in the process of being garbage collected (where key->user was freed but
->destroy() wasn't called yet - so it's still present in the linked list).

This would cause either a panic, or corrupt memory.

Fixes CVE-2014-9529.

Signed-off-by: Sasha Levin 
Signed-off-by: David Howells 
Signed-off-by: Greg Kroah-Hartman

KEYS: Fix stale key registration at error path

2015-01-08T17:58:16+00:00

commit b26bdde5bb27f3f900e25a95e33a0c476c8c2c48 upstream.

When loading encrypted-keys module, if the last check of
aes_get_sizes() in init_encrypted() fails, the driver just returns an
error without unregistering its key type.  This results in the stale
entry in the list.  In addition to memory leaks, this leads to a kernel
crash when registering a new key type later.

This patch fixes the problem by swapping the calls of aes_get_sizes()
and register_key_type(), and releasing resources properly at the error
paths.

Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=908163
Signed-off-by: Takashi Iwai 
Signed-off-by: Mimi Zohar 
Signed-off-by: Greg Kroah-Hartman