<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/sound/core, branch v5.3.2</title>
<subtitle>Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git</subtitle>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/'/>
<entry>
<title>ALSA: seq: Fix potential concurrent access to the deleted pool</title>
<updated>2019-08-25T07:31:10+00:00</updated>
<author>
<name>Takashi Iwai</name>
<email>tiwai@suse.de</email>
</author>
<published>2019-08-25T07:21:44+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=75545304eba6a3d282f923b96a466dc25a81e359'/>
<id>75545304eba6a3d282f923b96a466dc25a81e359</id>
<content type='text'>
The input pool of a client might be deleted via the resize ioctl, the
the access to it should be covered by the proper locks.  Currently the
only missing place is the call in snd_seq_ioctl_get_client_pool(), and
this patch papers over it.

Reported-by: syzbot+4a75454b9ca2777f35c7@syzkaller.appspotmail.com
Cc: &lt;stable@vger.kernel.org&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The input pool of a client might be deleted via the resize ioctl, the
the access to it should be covered by the proper locks.  Currently the
only missing place is the call in snd_seq_ioctl_get_client_pool(), and
this patch papers over it.

Reported-by: syzbot+4a75454b9ca2777f35c7@syzkaller.appspotmail.com
Cc: &lt;stable@vger.kernel.org&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ALSA: pcm: fix lost wakeup event scenarios in snd_pcm_drain</title>
<updated>2019-07-29T17:05:42+00:00</updated>
<author>
<name>Yuki Tsunashima</name>
<email>ytsunashima@jp.adit-jv.com</email>
</author>
<published>2019-07-29T15:10:36+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=37151a41df800493cfcbbef4f7208ffe04feb959'/>
<id>37151a41df800493cfcbbef4f7208ffe04feb959</id>
<content type='text'>
lost wakeup can occur after enabling irq, therefore put task
into interruptible before enabling interrupts,

without this change, task can be put to sleep and snd_pcm_drain
will delay

Fixes: f2b3614cefb6 ("ALSA: PCM - Don't check DMA time-out too shortly")
Signed-off-by: Yuki Tsunashima &lt;ytsunashima@jp.adit-jv.com&gt;
Signed-off-by: Suresh Udipi &lt;sudipi@jp.adit-jv.com&gt;
[ported from 4.9]
Signed-off-by: Adam Miartus &lt;amiartus@de.adit-jv.com&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
lost wakeup can occur after enabling irq, therefore put task
into interruptible before enabling interrupts,

without this change, task can be put to sleep and snd_pcm_drain
will delay

Fixes: f2b3614cefb6 ("ALSA: PCM - Don't check DMA time-out too shortly")
Signed-off-by: Yuki Tsunashima &lt;ytsunashima@jp.adit-jv.com&gt;
Signed-off-by: Suresh Udipi &lt;sudipi@jp.adit-jv.com&gt;
[ported from 4.9]
Signed-off-by: Adam Miartus &lt;amiartus@de.adit-jv.com&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ALSA: compress: Be more restrictive about when a drain is allowed</title>
<updated>2019-07-23T10:07:48+00:00</updated>
<author>
<name>Charles Keepax</name>
<email>ckeepax@opensource.cirrus.com</email>
</author>
<published>2019-07-22T09:24:36+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=3b8179944cb0dd53e5223996966746cdc8a60657'/>
<id>3b8179944cb0dd53e5223996966746cdc8a60657</id>
<content type='text'>
Draining makes little sense in the situation of hardware overrun, as the
hardware will have consumed all its available samples. Additionally,
draining whilst the stream is paused would presumably get stuck as no
data is being consumed on the DSP side.

Signed-off-by: Charles Keepax &lt;ckeepax@opensource.cirrus.com&gt;
Acked-by: Vinod Koul &lt;vkoul@kernel.org&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Draining makes little sense in the situation of hardware overrun, as the
hardware will have consumed all its available samples. Additionally,
draining whilst the stream is paused would presumably get stuck as no
data is being consumed on the DSP side.

Signed-off-by: Charles Keepax &lt;ckeepax@opensource.cirrus.com&gt;
Acked-by: Vinod Koul &lt;vkoul@kernel.org&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ALSA: compress: Don't allow paritial drain operations on capture streams</title>
<updated>2019-07-23T10:07:42+00:00</updated>
<author>
<name>Charles Keepax</name>
<email>ckeepax@opensource.cirrus.com</email>
</author>
<published>2019-07-22T09:24:35+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=a70ab8a8645083f3700814e757f2940a88b7ef88'/>
<id>a70ab8a8645083f3700814e757f2940a88b7ef88</id>
<content type='text'>
Partial drain and next track are intended for gapless playback and
don't really have an obvious interpretation for a capture stream, so
makes sense to not allow those operations on capture streams.

Signed-off-by: Charles Keepax &lt;ckeepax@opensource.cirrus.com&gt;
Acked-by: Vinod Koul &lt;vkoul@kernel.org&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Partial drain and next track are intended for gapless playback and
don't really have an obvious interpretation for a capture stream, so
makes sense to not allow those operations on capture streams.

Signed-off-by: Charles Keepax &lt;ckeepax@opensource.cirrus.com&gt;
Acked-by: Vinod Koul &lt;vkoul@kernel.org&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ALSA: compress: Prevent bypasses of set_params</title>
<updated>2019-07-23T10:07:36+00:00</updated>
<author>
<name>Charles Keepax</name>
<email>ckeepax@opensource.cirrus.com</email>
</author>
<published>2019-07-22T09:24:34+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=26c3f1542f5064310ad26794c09321780d00c57d'/>
<id>26c3f1542f5064310ad26794c09321780d00c57d</id>
<content type='text'>
Currently, whilst in SNDRV_PCM_STATE_OPEN it is possible to call
snd_compr_stop, snd_compr_drain and snd_compr_partial_drain, which
allow a transition to SNDRV_PCM_STATE_SETUP. The stream should
only be able to move to the setup state once it has received a
SNDRV_COMPRESS_SET_PARAMS ioctl. Fix this issue by not allowing
those ioctls whilst in the open state.

Signed-off-by: Charles Keepax &lt;ckeepax@opensource.cirrus.com&gt;
Acked-by: Vinod Koul &lt;vkoul@kernel.org&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Currently, whilst in SNDRV_PCM_STATE_OPEN it is possible to call
snd_compr_stop, snd_compr_drain and snd_compr_partial_drain, which
allow a transition to SNDRV_PCM_STATE_SETUP. The stream should
only be able to move to the setup state once it has received a
SNDRV_COMPRESS_SET_PARAMS ioctl. Fix this issue by not allowing
those ioctls whilst in the open state.

Signed-off-by: Charles Keepax &lt;ckeepax@opensource.cirrus.com&gt;
Acked-by: Vinod Koul &lt;vkoul@kernel.org&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ALSA: compress: Fix regression on compressed capture streams</title>
<updated>2019-07-23T10:07:22+00:00</updated>
<author>
<name>Charles Keepax</name>
<email>ckeepax@opensource.cirrus.com</email>
</author>
<published>2019-07-22T09:24:33+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=4475f8c4ab7b248991a60d9c02808dbb813d6be8'/>
<id>4475f8c4ab7b248991a60d9c02808dbb813d6be8</id>
<content type='text'>
A previous fix to the stop handling on compressed capture streams causes
some knock on issues. The previous fix updated snd_compr_drain_notify to
set the state back to PREPARED for capture streams. This causes some
issues however as the handling for snd_compr_poll differs between the
two states and some user-space applications were relying on the poll
failing after the stream had been stopped.

To correct this regression whilst still fixing the original problem the
patch was addressing, update the capture handling to skip the PREPARED
state rather than skipping the SETUP state as it has done until now.

Fixes: 4f2ab5e1d13d ("ALSA: compress: Fix stop handling on compressed capture streams")
Signed-off-by: Charles Keepax &lt;ckeepax@opensource.cirrus.com&gt;
Acked-by: Vinod Koul &lt;vkoul@kernel.org&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
A previous fix to the stop handling on compressed capture streams causes
some knock on issues. The previous fix updated snd_compr_drain_notify to
set the state back to PREPARED for capture streams. This causes some
issues however as the handling for snd_compr_poll differs between the
two states and some user-space applications were relying on the poll
failing after the stream had been stopped.

To correct this regression whilst still fixing the original problem the
patch was addressing, update the capture handling to skip the PREPARED
state rather than skipping the SETUP state as it has done until now.

Fixes: 4f2ab5e1d13d ("ALSA: compress: Fix stop handling on compressed capture streams")
Signed-off-by: Charles Keepax &lt;ckeepax@opensource.cirrus.com&gt;
Acked-by: Vinod Koul &lt;vkoul@kernel.org&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ALSA: pcm: Fix refcount_inc() on zero usage</title>
<updated>2019-07-19T13:47:00+00:00</updated>
<author>
<name>Takashi Iwai</name>
<email>tiwai@suse.de</email>
</author>
<published>2019-07-19T08:55:05+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=0e279dcea0ec897af1c979ebee4ec92b461793f5'/>
<id>0e279dcea0ec897af1c979ebee4ec92b461793f5</id>
<content type='text'>
The recent rewrite of PCM link lock management introduced the refcount
in snd_pcm_group object, managed by the kernel refcount_t API.  This
caused unexpected kernel warnings when the kernel is built with
CONFIG_REFCOUNT_FULL=y.  As the warning line indicates, the problem is
obviously that we start with refcount=0 and do refcount_inc() for
adding each PCM link, while refcount_t API doesn't like refcount_inc()
performed on zero.

For adapting the proper refcount_t usage, this patch changes the logic
slightly:
- The initial refcount is 1, assuming the single list entry
- The refcount is incremented / decremented at each PCM link addition
  and deletion
- ... which allows us concentrating only on the refcount as a release
  condition

Fixes: f57f3df03a8e ("ALSA: pcm: More fine-grained PCM link locking")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204221
Reported-and-tested-by: Duncan Overbruck &lt;kernel@duncano.de&gt;
Cc: &lt;stable@vger.kernel.org&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The recent rewrite of PCM link lock management introduced the refcount
in snd_pcm_group object, managed by the kernel refcount_t API.  This
caused unexpected kernel warnings when the kernel is built with
CONFIG_REFCOUNT_FULL=y.  As the warning line indicates, the problem is
obviously that we start with refcount=0 and do refcount_inc() for
adding each PCM link, while refcount_t API doesn't like refcount_inc()
performed on zero.

For adapting the proper refcount_t usage, this patch changes the logic
slightly:
- The initial refcount is 1, assuming the single list entry
- The refcount is incremented / decremented at each PCM link addition
  and deletion
- ... which allows us concentrating only on the refcount as a release
  condition

Fixes: f57f3df03a8e ("ALSA: pcm: More fine-grained PCM link locking")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204221
Reported-and-tested-by: Duncan Overbruck &lt;kernel@duncano.de&gt;
Cc: &lt;stable@vger.kernel.org&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ALSA: seq: Break too long mutex context in the write loop</title>
<updated>2019-07-16T07:41:41+00:00</updated>
<author>
<name>Takashi Iwai</name>
<email>tiwai@suse.de</email>
</author>
<published>2019-07-15T20:50:27+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=ede34f397ddb063b145b9e7d79c6026f819ded13'/>
<id>ede34f397ddb063b145b9e7d79c6026f819ded13</id>
<content type='text'>
The fix for the racy writes and ioctls to sequencer widened the
application of client-&gt;ioctl_mutex to the whole write loop.  Although
it does unlock/relock for the lengthy operation like the event dup,
the loop keeps the ioctl_mutex for the whole time in other
situations.  This may take quite long time if the user-space would
give a huge buffer, and this is a likely cause of some weird behavior
spotted by syzcaller fuzzer.

This patch puts a simple workaround, just adding a mutex break in the
loop when a large number of events have been processed.  This
shouldn't hit any performance drop because the threshold is set high
enough for usual operations.

Fixes: 7bd800915677 ("ALSA: seq: More protection for concurrent write and ioctl races")
Reported-by: syzbot+97aae04ce27e39cbfca9@syzkaller.appspotmail.com
Reported-by: syzbot+4c595632b98bb8ffcc66@syzkaller.appspotmail.com
Cc: &lt;stable@vger.kernel.org&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The fix for the racy writes and ioctls to sequencer widened the
application of client-&gt;ioctl_mutex to the whole write loop.  Although
it does unlock/relock for the lengthy operation like the event dup,
the loop keeps the ioctl_mutex for the whole time in other
situations.  This may take quite long time if the user-space would
give a huge buffer, and this is a likely cause of some weird behavior
spotted by syzcaller fuzzer.

This patch puts a simple workaround, just adding a mutex break in the
loop when a large number of events have been processed.  This
shouldn't hit any performance drop because the threshold is set high
enough for usual operations.

Fixes: 7bd800915677 ("ALSA: seq: More protection for concurrent write and ioctl races")
Reported-by: syzbot+97aae04ce27e39cbfca9@syzkaller.appspotmail.com
Reported-by: syzbot+4c595632b98bb8ffcc66@syzkaller.appspotmail.com
Cc: &lt;stable@vger.kernel.org&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'asoc-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus</title>
<updated>2019-07-08T12:45:34+00:00</updated>
<author>
<name>Takashi Iwai</name>
<email>tiwai@suse.de</email>
</author>
<published>2019-07-08T12:45:20+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=3c53c6255d598db7084c5c3d7553d7200e857818'/>
<id>3c53c6255d598db7084c5c3d7553d7200e857818</id>
<content type='text'>
ASoC: Updates for v5.3

This is a very big update, mainly thanks to Morimoto-san's refactoring
work and some fairly large new drivers.

 - Lots more work on moving towards a component based framework from
   Morimoto-san.
 - Support for force disconnecting muxes from Jerome Brunet.
 - New drivers for Cirrus Logic CS47L35, CS47L85 and CS47L90, Conexant
   CX2072X, Realtek RT1011 and RT1308.

Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
ASoC: Updates for v5.3

This is a very big update, mainly thanks to Morimoto-san's refactoring
work and some fairly large new drivers.

 - Lots more work on moving towards a component based framework from
   Morimoto-san.
 - Support for force disconnecting muxes from Jerome Brunet.
 - New drivers for Cirrus Logic CS47L35, CS47L85 and CS47L90, Conexant
   CX2072X, Realtek RT1011 and RT1308.

Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'for-linus' into for-next</title>
<updated>2019-07-01T15:01:55+00:00</updated>
<author>
<name>Takashi Iwai</name>
<email>tiwai@suse.de</email>
</author>
<published>2019-07-01T15:01:00+00:00</published>
<link rel='alternate' type='text/html' href='https://git.exis.tech/linux.git/commit/?id=b5c21c84705dbd96a0fff930d33022a17910b4f4'/>
<id>b5c21c84705dbd96a0fff930d33022a17910b4f4</id>
<content type='text'>
This back-merge is necessary for adjusting the latest FireWire fix
with the recent refactoring in 5.3 development branch.

Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
This back-merge is necessary for adjusting the latest FireWire fix
with the recent refactoring in 5.3 development branch.

Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</pre>
</div>
</content>
</entry>
</feed>
