linux.git/sound/usb/implicit.c, branch v6.1.2

ALSA: usb-audio: Add quirks for M-Audio Fast Track C400/600

2022-10-21T12:29:50+00:00

M-Audio Fast Track C400 and C600 devices (0763:2030 and 0763:2031,
respectively) seem requiring the explicit setup for the implicit
feedback mode.  This patch adds the quirk entries for those.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214817
Cc: 
Link: https://lore.kernel.org/r/20221021122722.24784-1-tiwai@suse.de
Signed-off-by: Takashi Iwai

ALSA: usb-audio: Move generic implicit fb quirk entries into quirks.c

2022-04-21T08:17:18+00:00

Use the new quirk bits to manage the generic implicit fb quirk
entries.  This makes easier to compare with other devices.

Link: https://lore.kernel.org/r/20220421064101.12456-2-tiwai@suse.de
Signed-off-by: Takashi Iwai

ALSA: usb-audio: Add quirk bits for enabling/disabling generic implicit fb

2022-04-21T08:17:17+00:00

For making easier to test, add the new quirk_flags bits 17 and 18 to
enable and disable the generic implicit feedback mode.  The bit 17 is
equivalent with implicit_fb=1 option, applying the generic implicit
feedback sync mode.  OTOH, the bit 18 disables the implicit fb mode
forcibly.

Link: https://lore.kernel.org/r/20220421064101.12456-1-tiwai@suse.de
Signed-off-by: Takashi Iwai

ALSA: usb-audio: revert to IMPLICIT_FB_FIXED_DEV for M-Audio FastTrack Ultra

2022-02-14T08:45:02+00:00

Commit 83b7dcbc51c930fc2079ab6c6fc9d719768321f1 introduced a generic
implicit feedback parser, which fails to execute for M-Audio FastTrack
Ultra sound cards. The issue is with the ENDPOINT_SYNCTYPE check in
add_generic_implicit_fb() where the SYNCTYPE is ADAPTIVE instead of ASYNC.
The reason is that the sync type of the FastTrack output endpoints are
set to adaptive in the quirks table since commit
65f04443c96dbda11b8fff21d6390e082846aa3c.

Fixes: 83b7dcbc51c9 ("ALSA: usb-audio: Add generic implicit fb parsing")
Signed-off-by: Matteo Martelli 
Cc: 
Link: https://lore.kernel.org/r/20220211224913.20683-2-matteomartelli3@gmail.com
Signed-off-by: Takashi Iwai

ALSA: usb-audio: disable implicit feedback sync for Behringer UFX1204 and UFX1604

2021-10-01T06:57:34+00:00

Behringer UFX1204 and UFX1604 have Synchronous endpoints to which
current ALSA code applies implicit feedback sync as if they were
Asynchronous endpoints. This breaks UAC compliance and is unneeded.

The commit 5e35dc0338d85ccebacf3f77eca1e5dea73155e8 and subsequent
1a15718b41df026cffd0e42cfdc38a1384ce19f9 were meant to clear up noise.

Unfortunately, noise persisted for those using higher sample rates and
this was only solved by commit d2e8f641257d0d3af6e45d6ac2d6f9d56b8ea964

Since there are no more reports of noise, let's get rid of the
implicit-fb quirks breaking UAC compliance.

Signed-off-by: Geraldo Nascimento 
Link: https://lore.kernel.org/r/YVYSnoQ7nxLXT0Dq@geday
Signed-off-by: Takashi Iwai

ALSA: usb-audio: Move playback_first flag into quirk_flags

2021-08-02T07:05:58+00:00

The snd_usb_audio.playback_first flag is used by the implicit feedback
mode handling, and this can be also moved to quirk_flags.

Link: https://lore.kernel.org/r/20210729073855.19043-6-tiwai@suse.de
Signed-off-by: Takashi Iwai

ALSA: usb-audio: Generic application of implicit fb to Roland/BOSS devices

2021-04-22T16:19:47+00:00

Through the examinations and experiments with lots of Roland and BOSS
USB-audio devices, we found out that the recently introduced
full-duplex operations with the implicit feedback mode work fine for
quite a few devices, while the others need only the capture-side quirk
to enforce the full-duplex mode.  The recent commit d86f43b17ed4
("ALSA: usb-audio: Add support for many Roland devices' implicit
feedback quirks") tried to add such quirk entries manually in the
lists, but this turned out to be too many and error-prone, hence it
was reverted again.

This patch is another attempt to cover those missing Roland/BOSS
devices but in a more generic way.  It matches the devices with the
vendor ID 0x0582, and checks whether they are with both ASYNC sync
types or ASYNC is only for capture device.  In the former case, it's
the device with the implicit feedback mode, and applies accordingly.
In both cases, the capture stream requires always the full-duplex
mode, and we apply the known capture quirk for that, too.

Basically the already existing BOSS device quirk entries become
redundant after this generic matching, so those are removed.  Although
the capture_implicit_fb_quirks[] table became empty and superfluous, I
keep it for now, so that people can put a special device easily at any
time later again.

Link: https://lore.kernel.org/r/CAOsVg8rA61B=005_VyUwpw3piVwA7Bo5fs1GYEB054efyzGjLw@mail.gmail.com
Link: https://lore.kernel.org/r/20210414083255.9527-1-tiwai@suse.de
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212519
Tested-by: Lucas Endres 
Link: https://lore.kernel.org/r/20210422120413.457-2-tiwai@suse.de
Signed-off-by: Takashi Iwai

Revert "ALSA: usb-audio: Add support for many Roland devices..."

2021-04-22T16:19:29+00:00

This reverts commit d86f43b17ed4 ("ALSA: usb-audio: Add support for
many Roland devices' feedback quirks").

It turned out that many quirk entries there don't contain the proper
EP values and/or the quirk types, which lead to the broken
operations.

As we're going to cover all Roland/BOSS devices in a more generic way
rather the explicit lists, let's revert the previous additions at
first.

Fixes: d86f43b17ed4 ("ALSA: usb-audio: Add support for many Roland devices' implicit feedback quirks")
Link: https://lore.kernel.org/r/20210422120413.457-1-tiwai@suse.de
Signed-off-by: Takashi Iwai

ALSA: usb-audio: Re-apply implicit feedback mode to Pioneer devices

2021-04-19T15:39:46+00:00

Pioneer devices are supposed to be working with the implicit feedback
mode, but so far the attempt to apply the implicit feedback caused
issues, hence we explicitly skipped the implicit feedback mode for
them.  Recently, Geraldo discovered that the device actually works if
you skip the generic matching of the sync EPs for the capture stream.
That is, we should apply the implicit feedback setup for the playback
like other similar devices, while we need to return 1 from
audioformat_capture_quirk() so that no further matching will be done.

And, later on, Olivia reported later that the fiddling with the
capture quirk alone doesn't suffice for the test with speaker-test
program.  This seems to be a similar case like the recently fixed BOSS
devices.  Indeed, the problem could be addressed by setting
playback_first flag, which indicates that the playback URBs have to be
sent out at first even in the implicit feedback mode.

This patch implements the application of the implicit feedback to
Pioneer devices as described in the above.  The former
skip_pioneer_sync_ep() was dropped, and instead we provide
is_pioneer_implicit_fb() to check the Pioneer devices that need the
implicit feedback.  In the audioformat_implicit_fb_quirk(), simply
apply the implicit fb for playback and set chip->playback_first flag
if matching, and in audioformat_capture_quirk()(), it returns 1 for
skipping the generic EP sync handling.

Reported-by: Geraldo 
Tested-by: Olivia Mackintosh 
Link: https://lore.kernel.org/r/s5ha6pygqfz.wl-tiwai@suse.de
Link: https://lore.kernel.org/r/20210419153918.450-1-tiwai@suse.de
Signed-off-by: Takashi Iwai

ALSA: usb-audio: Add support for many Roland devices' implicit feedback quirks

2021-04-17T08:07:04+00:00

It makes USB audio capture and playback possible and pristine on my Roland
INTEGRA-7, Boutique D-05, and R-26, along with many more I've encountered
people having had issues with over the last decade or so.

Signed-off-by: Lucas Endres 
Link: https://lore.kernel.org/r/CAOsVg8rA61B=005_VyUwpw3piVwA7Bo5fs1GYEB054efyzGjLw@mail.gmail.com
Signed-off-by: Takashi Iwai