linux.git/sound/usb, branch v6.1.2

ALSA: usb-audio: add the quirk for KT0206 device

2022-12-31T12:33:09+00:00

commit 696b66ac26ef953aed5783ef26a252ec8f207013 upstream.

Add relevant information to the quirks-table.h file.
The test passes and the sound source file plays normally.

Signed-off-by: wangdicheng 
Cc: 
Link: https://lore.kernel.org/r/SG2PR02MB587849631CB96809CF90DBED8A1A9@SG2PR02MB5878.apcprd02.prod.outlook.com
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

ALSA: usb-audio: Workaround for XRUN at prepare

2022-12-31T12:33:09+00:00

commit 198dde085ecc0138e4f0b0b69d18a0c870f2dea6 upstream.

Under certain situations (typically in the implicit feedback mode),
USB-audio driver starts a playback stream already at PCM prepare call
even before the actual PCM trigger-START call.  For implicit feedback
mode, this effectively starts two streams for data and sync
endpoints, and if a coupled sync stream gets XRUN at this point, it
results in an error -EPIPE.

The problem is that currently we return -EPIPE error as is from the
prepare.  Then application tries to recover again via the prepare
call, but it'll fail again because the sync-stop is missing.  The
sync-stop is missing because it's an internal trigger call (hence the
PCM core isn't involved).

Since we'll need to re-issue the prepare in anyway when trapped into
this pitfall, this patch attempts to address it in a bit different
way; namely, the driver tries to prepare once again after syncing the
stop manually by itself -- so applications don't see the internal
error.  At the second failure, we report the error as is, but this
shouldn't happen in normal situations.

Reported-and-tested-by: Carl Hetherington 
Cc: 
Link: https://lore.kernel.org/r/b4e71631-4a94-613-27b2-fb595792630@carlh.net
Link: https://lore.kernel.org/r/20221205132124.11585-4-tiwai@suse.de
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

ALSA: usb-audio: Add quirk for Tascam Model 12

2022-12-31T12:33:03+00:00

[ Upstream commit 67df411db3f0209e4bb5227d4dd9d41b21368b9d ]

Tascam's Model 12 is a mixer which can also operate as a USB audio
interface.  The audio interface uses explicit feedback but it seems that
it does not correctly handle missing isochronous frames.

When injecting an xrun (or doing anything else that pauses the playback
stream) the feedback rate climbs (for example, at 44,100Hz nominal, I
see a stable rate around 44,099 but xrun injection sees this peak at
around 44,135 in most cases) and glitches are heard in the audio stream
for several seconds - this is significantly worse than the single glitch
expected for an underrun.

While the stream does normally recover and the feedback rate returns to
a stable value, I have seen some occurrences where this does not happen
and the rate continues to increase while no audio is heard from the
output.  I have not found a solid reproduction for this.

This misbehaviour can be avoided by totally resetting the stream state
by switching the interface to alt 0 and back before restarting the
playback stream.

Add a new quirk flag which forces the endpoint and interface to be
reconfigured whenever the stream is stopped, and use this for the Tascam
Model 12.

Separate interfaces are used for the playback and capture endpoints, so
resetting the playback interface here will not affect the capture stream
if it is running.  While there are two endpoints on the interface,
these are the OUT data endpoint and the IN explicit feedback endpoint
corresponding to it and these are always stopped and started together.

Signed-off-by: John Keeping 
Link: https://lore.kernel.org/r/20221129130100.1257904-1-john@metanate.com
Signed-off-by: Takashi Iwai 
Signed-off-by: Sasha Levin

ALSA: usb-audio: Drop snd_BUG_ON() from snd_usbmidi_output_open()

2022-11-12T14:13:01+00:00

snd_usbmidi_output_open() has a check of the NULL port with
snd_BUG_ON().  snd_BUG_ON() was used as this shouldn't have happened,
but in reality, the NULL port may be seen when the device gives an
invalid endpoint setup at the descriptor, hence the driver skips the
allocation.  That is, the check itself is valid and snd_BUG_ON()
should be dropped from there.  Otherwise it's confusing as if it were
a real bug, as recently syzbot stumbled on it.

Reported-by: syzbot+9abda841d636d86c41da@syzkaller.appspotmail.com
Cc: 
Link: https://lore.kernel.org/r/syzbot+9abda841d636d86c41da@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20221112141223.6144-1-tiwai@suse.de
Signed-off-by: Takashi Iwai

ALSA: usb-audio: add quirk to fix Hamedal C20 disconnect issue

2022-11-10T06:50:30+00:00

For Hamedal C20, the current rate is different from the runtime rate,
snd_usb_endpoint stop and close endpoint to resetting rate.
if snd_usb_endpoint close the endpoint, sometimes usb will
disconnect the device.

Signed-off-by: Ai Chao 
Link: https://lore.kernel.org/r/20221110063452.295110-1-aichao@kylinos.cn
Signed-off-by: Takashi Iwai

ALSA: usb-audio: Add DSD support for Accuphase DAC-60

2022-11-09T06:24:30+00:00

Accuphase DAC-60 option card supports native DSD up to DSD256,
but doesn't have support for auto-detection. Explicitly enable
DSD support for the correct altsetting.

Signed-off-by: Jussi Laako 
Cc: 
Link: https://lore.kernel.org/r/20221108221241.1220878-1-jussi@sonarnerd.net
Signed-off-by: Takashi Iwai

ALSA: usb-audio: Add quirk entry for M-Audio Micro

2022-11-08T14:07:49+00:00

M-Audio Micro (0762:201a) defines the descriptor as vendor-specific,
while the content seems class-compliant.  Just overriding the probe
makes the device working.

Reported-by: Ash Logan 
Cc: 
Link: https://lore.kernel.org/r/7ecd4417-d860-4773-c1c1-b07433342390@heyquark.com
Link: https://lore.kernel.org/r/20221108140721.24248-1-tiwai@suse.de
Signed-off-by: Takashi Iwai

ALSA: usb-audio: Remove redundant workaround for Roland quirk

2022-11-08T06:59:37+00:00

The recent fix for the delayed card registration made the current
workaround for QUIRK_AUTODETECT superfluous, since the card
registration itself is delayed until the last interface probe.

This patch drops the redundant workaround in
create_autodetect_quirks() for simplification.

Fixes: 39efc9c8a973 ("ALSA: usb-audio: Fix last interface check for registration")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1205111
Link: https://lore.kernel.org/r/20221108065824.14418-2-tiwai@suse.de
Signed-off-by: Takashi Iwai

ALSA: usb-audio: Yet more regression for for the delayed card registration

2022-11-08T06:59:30+00:00

Although we tried to fix the regression for the recent changes with
the delayed card registration, it doesn't seem covering the all
cases; e.g. on Roland EDIROL M-100FX, where the generic quirk for
Roland devices is applied, it misses the card registration because the
detection of the last interface (apparently for MIDI) fails.

This patch is an attempt to recover from those failures by calling the
card register also at the error path for the secondary interfaces.
The card register condition is also extended to match with the old
check in the previous patch, too (i.e. the simple check of the
interface number) for catching the probe with errors.

Fixes: 39efc9c8a973 ("ALSA: usb-audio: Fix last interface check for registration")
Cc: 
Link: https://bugzilla.suse.com/show_bug.cgi?id=1205111
Link: https://lore.kernel.org/r/20221108065824.14418-1-tiwai@suse.de
Signed-off-by: Takashi Iwai

ALSA: usb-audio: Add quirks for M-Audio Fast Track C400/600

2022-10-21T12:29:50+00:00

M-Audio Fast Track C400 and C600 devices (0763:2030 and 0763:2031,
respectively) seem requiring the explicit setup for the implicit
feedback mode.  This patch adds the quirk entries for those.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214817
Cc: 
Link: https://lore.kernel.org/r/20221021122722.24784-1-tiwai@suse.de
Signed-off-by: Takashi Iwai