I quuestion the testing status of that patch! Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Commit 93c8bf45e083b89dffe3a708363c15c1b220c723 modified the USB device matching behaviour to ignore interface class matches if the device class is vendor-specific. This patch adds explicit ID matches for Logitech QuickCam devices, which have a vendor specific device class (but standards-compliant audio interfaces). This fixes a 2.6.20 regression where the audio component of these devices was no longer usable. http://bugs.gentoo.org/show_bug.cgi?id=175715 https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.20/+bug/93822 https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3040 Based on a patch from sergiom Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Some boards have the audio codec on slot #3 while the modem codec on slot #0. The driver should continue to probe the slots when no audio codec is found. This fixes the problem of no device on Toshiba A100 (and some other ATI SB450 devices). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Probing the codec slots on ATI controller causes problems on some devices like Acer laptops. On these devices, reading from codec slot 3 results in the communication failure with the codec chip. Meanwhile, some laptops (e.g. Gateway) have the codec connection only on slot 3, and probing this slot is mandatory for them. The patch improves the probing robustness. The additional slots are now checked only when no codecs are found in the primary three slots. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Added a missing call to resume mixer controls for STAC92xx codecs. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz> Signed-off-by: Chris Wright <chrisw@sous-sol.org>
* 'linus' of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa: [ALSA] hda-intel - Fix HDA buffer alignment [ALSA] hda-codec - Add model for HP Compaq d5750 [ALSA] hda-codec - Add support for MacBook Pro 1st generation [ALSA] version 1.0.14rc3 [ALSA] hda-codec - Add model for HP Compaq d5700 [ALSA] intel8x0 - Fix Oops at kdump crash kernel [ALSA] hda-codec - Fix speaker output on MacPro [ALSA] hda-codec - more systems for Analog Devices [ALSA] hda-intel - Fix codec probe with ATI contorllers [ALSA] hda-codec - Add suppoprt for Asus M2N-SLI motherboard [ALSA] intel8x0 - Fix speaker output after S2RAM [ALSA] ac97 - fix AD shared shared jack control logic [ALSA] soc - Fix dependencies in Kconfig files
From the HDA spec it appears that the buffers written to the BDL and sent to a codec must be 128 byte aligned (section 4.5.1). The alignment was not happening especially when playing 6 channels. This patch set the alignment of buffers and periods to 128 bytes. Signed-off-by: Joachim Deguara <joachim.deguara@amd.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Added model=hp-3013 for HP Compaq d5750 with ALC260 codec chip. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Fix audio on Macbook Pro 1st generation. Signed-off-by: Nicolas Boichat <nicolas@boichat.ch> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>