The if condition here was supposed to return on error but the return
statement is missing.  The effect is that the ->mixername is set to
"???" instead of "DT019X".

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ASoC: Intel fixes for v3.15

This is a relatively large batch of fixes for the newly added
Haswell/Baytrail drivers from Intel.  It's a bit larger than is good for
this point in the cycle but it's all for a newly added driver so not so
worrying as it might otherwise be.  Some of it's integration problems,
some of it's the sort of problem usually turned up in stress tests.

ASoC: Driver fixes for v3.15

A small set of driver fixes, nothing remarkable in itself or of any
relevance outside of the driver.

ASoC: Core fixes for v3.15

A few things here:

 - Fix the creation of spurious CODEC<->CODEC links which caused DAPM to
   have audio paths which shouldn't be present causing spurious powerups
   and potential audible issues for users.
 - Ensure the suspend->off transition doesn't have spurious transitions
   to prepare added to the sequence.
 - Fix incorrect skipping of PCM suspension for active audio streams.
 - Remove Timur Tabi from the CS4270 maintainers, Cirrus are now doing
   this and Timur no longer has the boards that he was using.

The register CLASS_D_CONTROL_1 is marked as volatile because it contains
a bit, DAC_MUTE, which is also mirrored in the ADC_DAC_CONTROL_1
register. This causes problems for the "Speaker Switch" control, which
will report an error if the CODEC is suspended because it relies on a
volatile register.

To resolve this issue mark CLASS_D_CONTROL_1 as non-volatile and
manually keep the register cache in sync by updating both bits when
changing the mute status.

Reported-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org

Commit 10df350977b1 ("ASoC: Intel: Fix Audio DSP usage when IOMMU is
enabled.") caused following regression in Baytrail SST:

baytrail-pcm-audio baytrail-pcm-audio: error: DMA alloc failed
baytrail-pcm-audio baytrail-pcm-audio: error: failed to load firmware

Fix this by calling dma_coerce_mask_and_coherent() in sst_byt_init() with
the same dma_dev device what is now used in sst_fw_new() when allocating the
DMA buffer.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

Broadwell display controller has 3 stream DMA engines. DMA0 cannot update DMA
postion buffer properly while DMA1 and DMA2 can work well. So this patch masks
the buggy DMA0 by keeping it as opened.

This is a tentative workaround, so keep the change small as Takashi suggested.

Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Vendor ID 0x10de0071 is used by a yet-to-be-named GPU chip.

Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>