Pull networking fixes from Paolo Abeni:
 "Including fixes from bpf and netfilter.

  Current release - new code bugs:

   - mctp: correct mctp_i2c_header_create result

   - eth: fungible: fix reference to __udivdi3 on 32b builds

   - eth: micrel: remove latencies support lan8814

  Previous releases - regressions:

   - bpf: resolve to prog->aux->dst_prog->type only for BPF_PROG_TYPE_EXT

   - vrf: fix packet sniffing for traffic originating from ip tunnels

   - rxrpc: fix a race in rxrpc_exit_net()

   - dsa: revert "net: dsa: stop updating master MTU from master.c"

   - eth: ice: fix MAC address setting

  Previous releases - always broken:

   - tls: fix slab-out-of-bounds bug in decrypt_internal

   - bpf: support dual-stack sockets in bpf_tcp_check_syncookie

   - xdp: fix coalescing for page_pool fragment recycling

   - ovs: fix leak of nested actions

   - eth: sfc:
      - add missing xdp queue reinitialization
      - fix using uninitialized xdp tx_queue

   - eth: ice:
      - clear default forwarding VSI during VSI release
      - fix broken IFF_ALLMULTI handling
      - synchronize_rcu() when terminating rings

   - eth: qede: confirm skb is allocated before using

   - eth: aqc111: fix out-of-bounds accesses in RX fixup

   - eth: slip: fix NPD bug in sl_tx_timeout()"

* tag 'net-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
  drivers: net: slip: fix NPD bug in sl_tx_timeout()
  bpf: Adjust bpf_tcp_check_syncookie selftest to test dual-stack sockets
  bpf: Support dual-stack sockets in bpf_tcp_check_syncookie
  myri10ge: fix an incorrect free for skb in myri10ge_sw_tso
  net: usb: aqc111: Fix out-of-bounds accesses in RX fixup
  qede: confirm skb is allocated before using
  net: ipv6mr: fix unused variable warning with CONFIG_IPV6_PIMSM_V2=n
  net: phy: mscc-miim: reject clause 45 register accesses
  net: axiemac: use a phandle to reference pcs_phy
  dt-bindings: net: add pcs-handle attribute
  net: axienet: factor out phy_node in struct axienet_local
  net: axienet: setup mdio unconditionally
  net: sfc: fix using uninitialized xdp tx_queue
  rxrpc: fix a race in rxrpc_exit_net()
  net: openvswitch: fix leak of nested actions
  net: ethernet: mv643xx: Fix over zealous checking of_get_mac_address()
  net: openvswitch: don't send internal clone attribute to the userspace.
  net: micrel: Fix KS8851 Kconfig
  ice: clear cmd_type_offset_bsz for TX rings
  ice: xsk: fix VSI state check in ice_xsk_wakeup()
  ...

Pull Kbuild updates from Masahiro Yamada:

 - Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
   additional flags to be passed to user-space programs.

 - Fix missing fflush() bugs in Kconfig and fixdep

 - Fix a minor bug in the comment format of the .config file

 - Make kallsyms ignore llvm's local labels, .L*

 - Fix UAPI compile-test for cross-compiling with Clang

 - Extend the LLVM= syntax to support LLVM=<suffix> form for using a
   particular version of LLVm, and LLVM=<prefix> form for using custom
   LLVM in a particular directory path.

 - Clean up Makefiles

* tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: Make $(LLVM) more flexible
  kbuild: add --target to correctly cross-compile UAPI headers with Clang
  fixdep: use fflush() and ferror() to ensure successful write to files
  arch: syscalls: simplify uapi/kapi directory creation
  usr/include: replace extra-y with always-y
  certs: simplify empty certs creation in certs/Makefile
  certs: include certs/signing_key.x509 unconditionally
  kallsyms: ignore all local labels prefixed by '.L'
  kconfig: fix missing '# end of' for empty menu
  kconfig: add fflush() before ferror() check
  kbuild: replace $(if A,A,B) with $(or A,B)
  kbuild: Add environment variables for userprogs flags
  kbuild: unify cmd_copy and cmd_shipped

Andrii noticed that since f97b8b9bd630 ("bpftool: Fix a bug in subskeleton
code generation") the subskeleton code allows bpf_object__destroy_subskeleton
to overwrite the errno that subskeleton__open would return with. While this
is not currently an issue, let's make it future-proof.

This patch explicitly tracks err in subskeleton__open and skeleton__create
(i.e. calloc failure is explicitly ENOMEM) and ensures that errno is -err on
the error return path. The skeleton code had to be changed since maps and
progs codegen is shared with subskeletons.

Fixes: f97b8b9bd630 ("bpftool: Fix a bug in subskeleton code generation")
Signed-off-by: Delyan Kratunov <delyank@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/3b6bfbb770c79ae64d8de26c1c1bd9d53a4b85f8.camel@fb.com

Arnaldo reported perf compilation fail with:

  $ make -k BUILD_BPF_SKEL=1 CORESIGHT=1 PYTHON=python3
  ...
  In file included from util/bpf_counter.c:28:
  /tmp/build/perf//util/bpf_skel/bperf_leader.skel.h: In function ‘bperf_leader_bpf__assert’:
  /tmp/build/perf//util/bpf_skel/bperf_leader.skel.h:351:51: error: unused parameter ‘s’ [-Werror=unused-parameter]
    351 | bperf_leader_bpf__assert(struct bperf_leader_bpf *s)
        |                          ~~~~~~~~~~~~~~~~~~~~~~~~~^
  cc1: all warnings being treated as errors

If there's nothing to generate in the new assert function,
we will get unused 's' warn/error, adding 'unused' attribute to it.

Fixes: 08d4dba6ae77 ("bpftool: Bpf skeletons assert type sizes")
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/bpf/20220328083703.2880079-1-jolsa@kernel.org

In [1], we added a kconfig knob that can set
/proc/sys/kernel/unprivileged_bpf_disabled to 2

We now check against this value in bpftool feature probe

[1] https://lore.kernel.org/bpf/74ec548079189e4e4dffaeb42b8987bb3c852eee.1620765074.git.daniel@iogearbox.net

Signed-off-by: Milan Landaverde <milan@mdaverde.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20220322145012.1315376-1-milan@mdaverde.com

Compiled with clang by adding LLVM=1 both kernel and selftests/bpf
build, I hit the following compilation error:

In file included from /.../tools/testing/selftests/bpf/prog_tests/subskeleton.c:6:
  ./test_subskeleton_lib.subskel.h:168:6: error: variable 'err' is used uninitialized whenever
      'if' condition is true [-Werror,-Wsometimes-uninitialized]
          if (!s->progs)
              ^~~~~~~~~
  ./test_subskeleton_lib.subskel.h:181:11: note: uninitialized use occurs here
          errno = -err;
                   ^~~
  ./test_subskeleton_lib.subskel.h:168:2: note: remove the 'if' if its condition is always false
          if (!s->progs)
          ^~~~~~~~~~~~~~

The compilation error is triggered by the following code
        ...
        int err;

        obj = (struct test_subskeleton_lib *)calloc(1, sizeof(*obj));
        if (!obj) {
                errno = ENOMEM;
                goto err;
        }
        ...

  err:
        test_subskeleton_lib__destroy(obj);
        errno = -err;
        ...
in test_subskeleton_lib__open(). The 'err' is not initialized, yet it
is used in 'errno = -err' later.

The fix is to remove 'errno = -err' since errno has been set properly
in all incoming branches.

Fixes: 00389c58ffe9 ("bpftool: Add support for subskeletons")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220320032009.3106133-1-yhs@fb.com

If there is no btf_id or frozen, it will not show the pids, but the pids don't
depend on any one of them.

Below is the result after this change:

  $ ./bpftool map show
  2: lpm_trie  flags 0x1
	key 8B  value 8B  max_entries 1  memlock 4096B
	pids systemd(1)
  3: lpm_trie  flags 0x1
	key 20B  value 8B  max_entries 1  memlock 4096B
	pids systemd(1)

While before this change, the 'pids systemd(1)' can't be displayed.

Fixes: 9330986c0300 ("bpf: Add bloom filter map implementation")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220320060815.7716-1-laoar.shao@gmail.com

BPF_TRACE_KPROBE_MULTI is a new attach type name, add it to bpftool's
table. This fixes a currently failing CI bpftool check.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220318150106.2933343-1-andrii@kernel.org

Subskeletons are headers which require an already loaded program to
operate.

For example, when a BPF library is linked into a larger BPF object file,
the library userspace needs a way to access its own global variables
without requiring knowledge about the larger program at build time.

As a result, subskeletons require a loaded bpf_object to open().
Further, they find their own symbols in the larger program by
walking BTF type data at run time.

At this time, programs, maps, and globals are supported through
non-owning pointers.

Signed-off-by: Delyan Kratunov <delyank@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/ca8a48b4841c72d285ecce82371bef4a899756cb.1647473511.git.delyank@fb.com

The top-level (bpftool.8) man page was missing docs for a few
subcommands and their respective sub-sub-commands.

This commit brings the top level man page up to date. Note that I've
kept the ordering of the subcommands the same as in `bpftool help`.

Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/3049ef5dc509c0d1832f0a8b2dba2ccaad0af688.1647213551.git.dxu@dxuuu.xyz