linux.git/tools/objtool, branch v4.14.161 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git x86/insn: Add some Intel instructions to the opcode map 2019-12-31T11:37:45+00:00 Adrian Hunter adrian.hunter@intel.com 2019-11-15T13:54:47+00:00 21f32d7121560ed0c79fb6887682e731b9839161 [ Upstream commit b980be189c9badba50634671e2303e92bf28e35a ] Add to the opcode map the following instructions: cldemote tpause umonitor umwait movdiri movdir64b enqcmd enqcmds encls enclu enclv pconfig wbnoinvd For information about the instructions, refer Intel SDM May 2019 (325462-070US) and Intel Architecture Instruction Set Extensions May 2019 (319433-037). The instruction decoding can be tested using the perf tools' "x86 instruction decoder - new instructions" test as folllows: $ perf test -v "new " 2>&1 | grep -i cldemote Decoded ok: 0f 1c 00 cldemote (%eax) Decoded ok: 0f 1c 05 78 56 34 12 cldemote 0x12345678 Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%eax,%ecx,8) Decoded ok: 0f 1c 00 cldemote (%rax) Decoded ok: 41 0f 1c 00 cldemote (%r8) Decoded ok: 0f 1c 04 25 78 56 34 12 cldemote 0x12345678 Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%rax,%rcx,8) Decoded ok: 41 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%r8,%rcx,8) $ perf test -v "new " 2>&1 | grep -i tpause Decoded ok: 66 0f ae f3 tpause %ebx Decoded ok: 66 0f ae f3 tpause %ebx Decoded ok: 66 41 0f ae f0 tpause %r8d $ perf test -v "new " 2>&1 | grep -i umonitor Decoded ok: 67 f3 0f ae f0 umonitor %ax Decoded ok: f3 0f ae f0 umonitor %eax Decoded ok: 67 f3 0f ae f0 umonitor %eax Decoded ok: f3 0f ae f0 umonitor %rax Decoded ok: 67 f3 41 0f ae f0 umonitor %r8d $ perf test -v "new " 2>&1 | grep -i umwait Decoded ok: f2 0f ae f0 umwait %eax Decoded ok: f2 0f ae f0 umwait %eax Decoded ok: f2 41 0f ae f0 umwait %r8d $ perf test -v "new " 2>&1 | grep -i movdiri Decoded ok: 0f 38 f9 03 movdiri %eax,(%ebx) Decoded ok: 0f 38 f9 88 78 56 34 12 movdiri %ecx,0x12345678(%eax) Decoded ok: 48 0f 38 f9 03 movdiri %rax,(%rbx) Decoded ok: 48 0f 38 f9 88 78 56 34 12 movdiri %rcx,0x12345678(%rax) $ perf test -v "new " 2>&1 | grep -i movdir64b Decoded ok: 66 0f 38 f8 18 movdir64b (%eax),%ebx Decoded ok: 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%eax),%ecx Decoded ok: 67 66 0f 38 f8 1c movdir64b (%si),%bx Decoded ok: 67 66 0f 38 f8 8c 34 12 movdir64b 0x1234(%si),%cx Decoded ok: 66 0f 38 f8 18 movdir64b (%rax),%rbx Decoded ok: 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%rax),%rcx Decoded ok: 67 66 0f 38 f8 18 movdir64b (%eax),%ebx Decoded ok: 67 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%eax),%ecx $ perf test -v "new " 2>&1 | grep -i enqcmd Decoded ok: f2 0f 38 f8 18 enqcmd (%eax),%ebx Decoded ok: f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%eax),%ecx Decoded ok: 67 f2 0f 38 f8 1c enqcmd (%si),%bx Decoded ok: 67 f2 0f 38 f8 8c 34 12 enqcmd 0x1234(%si),%cx Decoded ok: f3 0f 38 f8 18 enqcmds (%eax),%ebx Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx Decoded ok: 67 f3 0f 38 f8 1c enqcmds (%si),%bx Decoded ok: 67 f3 0f 38 f8 8c 34 12 enqcmds 0x1234(%si),%cx Decoded ok: f2 0f 38 f8 18 enqcmd (%rax),%rbx Decoded ok: f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%rax),%rcx Decoded ok: 67 f2 0f 38 f8 18 enqcmd (%eax),%ebx Decoded ok: 67 f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%eax),%ecx Decoded ok: f3 0f 38 f8 18 enqcmds (%rax),%rbx Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%rax),%rcx Decoded ok: 67 f3 0f 38 f8 18 enqcmds (%eax),%ebx Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx $ perf test -v "new " 2>&1 | grep -i enqcmds Decoded ok: f3 0f 38 f8 18 enqcmds (%eax),%ebx Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx Decoded ok: 67 f3 0f 38 f8 1c enqcmds (%si),%bx Decoded ok: 67 f3 0f 38 f8 8c 34 12 enqcmds 0x1234(%si),%cx Decoded ok: f3 0f 38 f8 18 enqcmds (%rax),%rbx Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%rax),%rcx Decoded ok: 67 f3 0f 38 f8 18 enqcmds (%eax),%ebx Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx $ perf test -v "new " 2>&1 | grep -i encls Decoded ok: 0f 01 cf encls Decoded ok: 0f 01 cf encls $ perf test -v "new " 2>&1 | grep -i enclu Decoded ok: 0f 01 d7 enclu Decoded ok: 0f 01 d7 enclu $ perf test -v "new " 2>&1 | grep -i enclv Decoded ok: 0f 01 c0 enclv Decoded ok: 0f 01 c0 enclv $ perf test -v "new " 2>&1 | grep -i pconfig Decoded ok: 0f 01 c5 pconfig Decoded ok: 0f 01 c5 pconfig $ perf test -v "new " 2>&1 | grep -i wbnoinvd Decoded ok: f3 0f 09 wbnoinvd Decoded ok: f3 0f 09 wbnoinvd Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Link: http://lore.kernel.org/lkml/20191115135447.6519-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b980be189c9badba50634671e2303e92bf28e35a ]

Add to the opcode map the following instructions:
        cldemote
        tpause
        umonitor
        umwait
        movdiri
        movdir64b
        enqcmd
        enqcmds
        encls
        enclu
        enclv
        pconfig
        wbnoinvd

For information about the instructions, refer Intel SDM May 2019
(325462-070US) and Intel Architecture Instruction Set Extensions
May 2019 (319433-037).

The instruction decoding can be tested using the perf tools'
"x86 instruction decoder - new instructions" test as folllows:

  $ perf test -v "new " 2>&1 | grep -i cldemote
  Decoded ok: 0f 1c 00                    cldemote (%eax)
  Decoded ok: 0f 1c 05 78 56 34 12        cldemote 0x12345678
  Decoded ok: 0f 1c 84 c8 78 56 34 12     cldemote 0x12345678(%eax,%ecx,8)
  Decoded ok: 0f 1c 00                    cldemote (%rax)
  Decoded ok: 41 0f 1c 00                 cldemote (%r8)
  Decoded ok: 0f 1c 04 25 78 56 34 12     cldemote 0x12345678
  Decoded ok: 0f 1c 84 c8 78 56 34 12     cldemote 0x12345678(%rax,%rcx,8)
  Decoded ok: 41 0f 1c 84 c8 78 56 34 12  cldemote 0x12345678(%r8,%rcx,8)
  $ perf test -v "new " 2>&1 | grep -i tpause
  Decoded ok: 66 0f ae f3                 tpause %ebx
  Decoded ok: 66 0f ae f3                 tpause %ebx
  Decoded ok: 66 41 0f ae f0              tpause %r8d
  $ perf test -v "new " 2>&1 | grep -i umonitor
  Decoded ok: 67 f3 0f ae f0              umonitor %ax
  Decoded ok: f3 0f ae f0                 umonitor %eax
  Decoded ok: 67 f3 0f ae f0              umonitor %eax
  Decoded ok: f3 0f ae f0                 umonitor %rax
  Decoded ok: 67 f3 41 0f ae f0           umonitor %r8d
  $ perf test -v "new " 2>&1 | grep -i umwait
  Decoded ok: f2 0f ae f0                 umwait %eax
  Decoded ok: f2 0f ae f0                 umwait %eax
  Decoded ok: f2 41 0f ae f0              umwait %r8d
  $ perf test -v "new " 2>&1 | grep -i movdiri
  Decoded ok: 0f 38 f9 03                 movdiri %eax,(%ebx)
  Decoded ok: 0f 38 f9 88 78 56 34 12     movdiri %ecx,0x12345678(%eax)
  Decoded ok: 48 0f 38 f9 03              movdiri %rax,(%rbx)
  Decoded ok: 48 0f 38 f9 88 78 56 34 12  movdiri %rcx,0x12345678(%rax)
  $ perf test -v "new " 2>&1 | grep -i movdir64b
  Decoded ok: 66 0f 38 f8 18              movdir64b (%eax),%ebx
  Decoded ok: 66 0f 38 f8 88 78 56 34 12  movdir64b 0x12345678(%eax),%ecx
  Decoded ok: 67 66 0f 38 f8 1c           movdir64b (%si),%bx
  Decoded ok: 67 66 0f 38 f8 8c 34 12     movdir64b 0x1234(%si),%cx
  Decoded ok: 66 0f 38 f8 18              movdir64b (%rax),%rbx
  Decoded ok: 66 0f 38 f8 88 78 56 34 12  movdir64b 0x12345678(%rax),%rcx
  Decoded ok: 67 66 0f 38 f8 18           movdir64b (%eax),%ebx
  Decoded ok: 67 66 0f 38 f8 88 78 56 34 12       movdir64b 0x12345678(%eax),%ecx
  $ perf test -v "new " 2>&1 | grep -i enqcmd
  Decoded ok: f2 0f 38 f8 18              enqcmd (%eax),%ebx
  Decoded ok: f2 0f 38 f8 88 78 56 34 12  enqcmd 0x12345678(%eax),%ecx
  Decoded ok: 67 f2 0f 38 f8 1c           enqcmd (%si),%bx
  Decoded ok: 67 f2 0f 38 f8 8c 34 12     enqcmd 0x1234(%si),%cx
  Decoded ok: f3 0f 38 f8 18              enqcmds (%eax),%ebx
  Decoded ok: f3 0f 38 f8 88 78 56 34 12  enqcmds 0x12345678(%eax),%ecx
  Decoded ok: 67 f3 0f 38 f8 1c           enqcmds (%si),%bx
  Decoded ok: 67 f3 0f 38 f8 8c 34 12     enqcmds 0x1234(%si),%cx
  Decoded ok: f2 0f 38 f8 18              enqcmd (%rax),%rbx
  Decoded ok: f2 0f 38 f8 88 78 56 34 12  enqcmd 0x12345678(%rax),%rcx
  Decoded ok: 67 f2 0f 38 f8 18           enqcmd (%eax),%ebx
  Decoded ok: 67 f2 0f 38 f8 88 78 56 34 12       enqcmd 0x12345678(%eax),%ecx
  Decoded ok: f3 0f 38 f8 18              enqcmds (%rax),%rbx
  Decoded ok: f3 0f 38 f8 88 78 56 34 12  enqcmds 0x12345678(%rax),%rcx
  Decoded ok: 67 f3 0f 38 f8 18           enqcmds (%eax),%ebx
  Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12       enqcmds 0x12345678(%eax),%ecx
  $ perf test -v "new " 2>&1 | grep -i enqcmds
  Decoded ok: f3 0f 38 f8 18              enqcmds (%eax),%ebx
  Decoded ok: f3 0f 38 f8 88 78 56 34 12  enqcmds 0x12345678(%eax),%ecx
  Decoded ok: 67 f3 0f 38 f8 1c           enqcmds (%si),%bx
  Decoded ok: 67 f3 0f 38 f8 8c 34 12     enqcmds 0x1234(%si),%cx
  Decoded ok: f3 0f 38 f8 18              enqcmds (%rax),%rbx
  Decoded ok: f3 0f 38 f8 88 78 56 34 12  enqcmds 0x12345678(%rax),%rcx
  Decoded ok: 67 f3 0f 38 f8 18           enqcmds (%eax),%ebx
  Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12       enqcmds 0x12345678(%eax),%ecx
  $ perf test -v "new " 2>&1 | grep -i encls
  Decoded ok: 0f 01 cf                    encls
  Decoded ok: 0f 01 cf                    encls
  $ perf test -v "new " 2>&1 | grep -i enclu
  Decoded ok: 0f 01 d7                    enclu
  Decoded ok: 0f 01 d7                    enclu
  $ perf test -v "new " 2>&1 | grep -i enclv
  Decoded ok: 0f 01 c0                    enclv
  Decoded ok: 0f 01 c0                    enclv
  $ perf test -v "new " 2>&1 | grep -i pconfig
  Decoded ok: 0f 01 c5                    pconfig
  Decoded ok: 0f 01 c5                    pconfig
  $ perf test -v "new " 2>&1 | grep -i wbnoinvd
  Decoded ok: f3 0f 09                    wbnoinvd
  Decoded ok: f3 0f 09                    wbnoinvd

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20191115135447.6519-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
x86/insn: Fix awk regexp warnings 2019-12-01T08:14:21+00:00 Alexander Kapshuk alexander.kapshuk@gmail.com 2019-09-24T04:46:59+00:00 fbb0e381e73094a1288cd5ec459e853ed995c358 commit 700c1018b86d0d4b3f1f2d459708c0cdf42b521d upstream. gawk 5.0.1 generates the following regexp warnings: GEN /home/sasha/torvalds/tools/objtool/arch/x86/lib/inat-tables.c awk: ../arch/x86/tools/gen-insn-attr-x86.awk:260: warning: regexp escape sequence `\:' is not a known regexp operator awk: ../arch/x86/tools/gen-insn-attr-x86.awk:350: (FILENAME=../arch/x86/lib/x86-opcode-map.txt FNR=41) warning: regexp escape sequence `\&' is not a known regexp operator Ealier versions of gawk are not known to generate these warnings. The gawk manual referenced below does not list characters ':' and '&' as needing escaping, so 'unescape' them. See https://www.gnu.org/software/gawk/manual/html_node/Escape-Sequences.html for more info. Running diff on the output generated by the script before and after applying the patch reported no differences. [ bp: Massage commit message. ] [ Caught the respective tools header discrepancy. ] Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190924044659.3785-1-alexander.kapshuk@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 700c1018b86d0d4b3f1f2d459708c0cdf42b521d upstream.

gawk 5.0.1 generates the following regexp warnings:

  GEN      /home/sasha/torvalds/tools/objtool/arch/x86/lib/inat-tables.c
  awk: ../arch/x86/tools/gen-insn-attr-x86.awk:260: warning: regexp escape sequence `\:' is not a known regexp operator
  awk: ../arch/x86/tools/gen-insn-attr-x86.awk:350: (FILENAME=../arch/x86/lib/x86-opcode-map.txt FNR=41) warning: regexp escape sequence `\&' is  not a known regexp operator

Ealier versions of gawk are not known to generate these warnings. The
gawk manual referenced below does not list characters ':' and '&' as
needing escaping, so 'unescape' them. See

  https://www.gnu.org/software/gawk/manual/html_node/Escape-Sequences.html

for more info.

Running diff on the output generated by the script before and after
applying the patch reported no differences.

 [ bp: Massage commit message. ]

[ Caught the respective tools header discrepancy. ]
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190924044659.3785-1-alexander.kapshuk@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
objtool: Clobber user CFLAGS variable 2019-10-05T10:47:35+00:00 Josh Poimboeuf jpoimboe@redhat.com 2019-08-29T23:28:49+00:00 3180af1c145c73bcc1e35fdc4e617762a6a6b229 commit f73b3cc39c84220e6dccd463b5c8279b03514646 upstream. If the build user has the CFLAGS variable set in their environment, objtool blindly appends to it, which can cause unexpected behavior. Clobber CFLAGS to ensure consistent objtool compilation behavior. Reported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Tested-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/83a276df209962e6058fcb6c615eef9d401c21bc.1567121311.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> CC: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f73b3cc39c84220e6dccd463b5c8279b03514646 upstream.

If the build user has the CFLAGS variable set in their environment,
objtool blindly appends to it, which can cause unexpected behavior.

Clobber CFLAGS to ensure consistent objtool compilation behavior.

Reported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Tested-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/83a276df209962e6058fcb6c615eef9d401c21bc.1567121311.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
CC: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
objtool: Query pkg-config for libelf location 2019-10-05T10:47:32+00:00 Rolf Eike Beer eb@emlix.com 2019-03-26T17:48:39+00:00 21b50a160d8f01571e8fb5cd9c8e390fc673ebc5 commit 056d28d135bca0b1d0908990338e00e9dadaf057 upstream. If it is not in the default location, compilation fails at several points. Signed-off-by: Rolf Eike Beer <eb@emlix.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/91a25e992566a7968fedc89ec80e7f4c83ad0548.1553622500.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 056d28d135bca0b1d0908990338e00e9dadaf057 upstream.

If it is not in the default location, compilation fails at several points.

Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/91a25e992566a7968fedc89ec80e7f4c83ad0548.1553622500.git.jpoimboe@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
objtool: Add rewind_stack_do_exit() to the noreturn list 2019-08-09T15:53:33+00:00 Josh Poimboeuf jpoimboe@redhat.com 2019-04-04T17:17:35+00:00 c9f57f29b52036d70ec0639a550121431cc74665 commit 4fa5ecda2bf96be7464eb406df8aba9d89260227 upstream. This fixes the following warning seen on GCC 7.3: arch/x86/kernel/dumpstack.o: warning: objtool: oops_end() falls through to next function show_regs() Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/3418ebf5a5a9f6ed7e80954c741c0b904b67b5dc.1554398240.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4fa5ecda2bf96be7464eb406df8aba9d89260227 upstream.

This fixes the following warning seen on GCC 7.3:

  arch/x86/kernel/dumpstack.o: warning: objtool: oops_end() falls through to next function show_regs()

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/3418ebf5a5a9f6ed7e80954c741c0b904b67b5dc.1554398240.git.jpoimboe@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
objtool: Add machine_real_restart() to the noreturn list 2019-08-09T15:53:33+00:00 Josh Poimboeuf jpoimboe@redhat.com 2018-06-19T15:47:50+00:00 779e18aa822348c98fca14e1ff29c0f0f3a4acd4 commit 684fb246578b9e81fc7b4ca5c71eae22edb650b2 upstream. machine_real_restart() is annotated as '__noreturn", so add it to the objtool noreturn list. This fixes the following warning with clang and CONFIG_CC_OPTIMIZE_FOR_SIZE=y: arch/x86/kernel/reboot.o: warning: objtool: native_machine_emergency_restart() falls through to next function machine_power_off() Reported-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lkml.kernel.org/r/791712792aa4431bdd55bf1beb33a169ddf3b4a2.1529423255.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 684fb246578b9e81fc7b4ca5c71eae22edb650b2 upstream.

machine_real_restart() is annotated as '__noreturn", so add it to the
objtool noreturn list.  This fixes the following warning with clang and
CONFIG_CC_OPTIMIZE_FOR_SIZE=y:

  arch/x86/kernel/reboot.o: warning: objtool: native_machine_emergency_restart() falls through to next function machine_power_off()

Reported-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lkml.kernel.org/r/791712792aa4431bdd55bf1beb33a169ddf3b4a2.1529423255.git.jpoimboe@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
objtool: Support GCC 9 cold subfunction naming scheme 2019-08-06T17:05:28+00:00 Josh Poimboeuf jpoimboe@redhat.com 2018-11-01T02:57:30+00:00 a22c63764d09e7e0b22e110e407921daf35cdb8c commit bcb6fb5da77c2a228adf07cc9cb1a0c2aa2001c6 upstream. Starting with GCC 8, a lot of unlikely code was moved out of line to "cold" subfunctions in .text.unlikely. For example, the unlikely bits of: irq_do_set_affinity() are moved out to the following subfunction: irq_do_set_affinity.cold.49() Starting with GCC 9, the numbered suffix has been removed. So in the above example, the cold subfunction is instead: irq_do_set_affinity.cold() Tweak the objtool subfunction detection logic so that it detects both GCC 8 and GCC 9 naming schemes. Reported-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/015e9544b1f188d36a7f02fa31e9e95629aa5f50.1541040800.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit bcb6fb5da77c2a228adf07cc9cb1a0c2aa2001c6 upstream.

Starting with GCC 8, a lot of unlikely code was moved out of line to
"cold" subfunctions in .text.unlikely.

For example, the unlikely bits of:

  irq_do_set_affinity()

are moved out to the following subfunction:

  irq_do_set_affinity.cold.49()

Starting with GCC 9, the numbered suffix has been removed.  So in the
above example, the cold subfunction is instead:

  irq_do_set_affinity.cold()

Tweak the objtool subfunction detection logic so that it detects both
GCC 8 and GCC 9 naming schemes.

Reported-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/015e9544b1f188d36a7f02fa31e9e95629aa5f50.1541040800.git.jpoimboe@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
objtool: Support per-function rodata sections 2019-06-25T03:36:50+00:00 Allan Xavier allan.x.xavier@oracle.com 2018-09-07T13:12:01+00:00 f1a58e1bcad882ea08778320147c7ef9118f704f commit 4a60aa05a0634241ce17f957bf9fb5ac1eed6576 upstream. Add support for processing switch jump tables in objects with multiple .rodata sections, such as those created by '-ffunction-sections' and '-fdata-sections'. Currently, objtool always looks in .rodata for jump table information, which results in many "sibling call from callable instruction with modified stack frame" warnings with objects compiled using those flags. The fix is comprised of three parts: 1. Flagging all .rodata sections when importing ELF information for easier checking later. 2. Keeping a reference to the section each relocation is from in order to get the list_head for the other relocations in that section. 3. Finding jump tables by following relocations to .rodata sections, rather than always referencing a single global .rodata section. The patch has been tested without data sections enabled and no differences in the resulting orc unwind information were seen. Note that as objtool adds terminators to end of each .text section the unwind information generated between a function+data sections build and a normal build aren't directly comparable. Manual inspection suggests that objtool is now generating the correct information, or at least making more of an effort to do so than it did previously. Signed-off-by: Allan Xavier <allan.x.xavier@oracle.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/099bdc375195c490dda04db777ee0b95d566ded1.1536325914.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4a60aa05a0634241ce17f957bf9fb5ac1eed6576 upstream.

Add support for processing switch jump tables in objects with multiple
.rodata sections, such as those created by '-ffunction-sections' and
'-fdata-sections'.  Currently, objtool always looks in .rodata for jump
table information, which results in many "sibling call from callable
instruction with modified stack frame" warnings with objects compiled
using those flags.

The fix is comprised of three parts:

1. Flagging all .rodata sections when importing ELF information for
   easier checking later.

2. Keeping a reference to the section each relocation is from in order
   to get the list_head for the other relocations in that section.

3. Finding jump tables by following relocations to .rodata sections,
   rather than always referencing a single global .rodata section.

The patch has been tested without data sections enabled and no
differences in the resulting orc unwind information were seen.

Note that as objtool adds terminators to end of each .text section the
unwind information generated between a function+data sections build and
a normal build aren't directly comparable. Manual inspection suggests
that objtool is now generating the correct information, or at least
making more of an effort to do so than it did previously.

Signed-off-by: Allan Xavier <allan.x.xavier@oracle.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/099bdc375195c490dda04db777ee0b95d566ded1.1536325914.git.jpoimboe@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
objtool: Don't use ignore flag for fake jumps 2019-06-15T09:54:52+00:00 Josh Poimboeuf jpoimboe@redhat.com 2019-05-13T17:01:31+00:00 dcb38ed5e365a57eed61a268cc783ad034a1dfae [ Upstream commit e6da9567959e164f82bc81967e0d5b10dee870b4 ] The ignore flag is set on fake jumps in order to keep add_jump_destinations() from setting their jump_dest, since it already got set when the fake jump was created. But using the ignore flag is a bit of a hack. It's normally used to skip validation of an instruction, which doesn't really make sense for fake jumps. Also, after the next patch, using the ignore flag for fake jumps can trigger a false "why am I validating an ignored function?" warning. Instead just add an explicit check in add_jump_destinations() to skip fake jumps. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/71abc072ff48b2feccc197723a9c52859476c068.1557766718.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e6da9567959e164f82bc81967e0d5b10dee870b4 ]

The ignore flag is set on fake jumps in order to keep
add_jump_destinations() from setting their jump_dest, since it already
got set when the fake jump was created.

But using the ignore flag is a bit of a hack.  It's normally used to
skip validation of an instruction, which doesn't really make sense for
fake jumps.

Also, after the next patch, using the ignore flag for fake jumps can
trigger a false "why am I validating an ignored function?" warning.

Instead just add an explicit check in add_jump_destinations() to skip
fake jumps.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/71abc072ff48b2feccc197723a9c52859476c068.1557766718.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
objtool: Allow AR to be overridden with HOSTAR 2019-05-25T16:25:26+00:00 Nathan Chancellor natechancellor@gmail.com 2019-05-16T17:49:42+00:00 94c775d57374335208309c09ca8ecf7c8ce22de2 commit 8ea58f1e8b11cca3087b294779bf5959bf89cc10 upstream. Currently, this Makefile hardcodes GNU ar, meaning that if it is not available, there is no way to supply a different one and the build will fail. $ make AR=llvm-ar CC=clang LD=ld.lld HOSTAR=llvm-ar HOSTCC=clang \ HOSTLD=ld.lld HOSTLDFLAGS=-fuse-ld=lld defconfig modules_prepare ... AR /out/tools/objtool/libsubcmd.a /bin/sh: 1: ar: not found ... Follow the logic of HOST{CC,LD} and allow the user to specify a different ar tool via HOSTAR (which is used elsewhere in other tools/ Makefiles). Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Cc: <stable@vger.kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/80822a9353926c38fd7a152991c6292491a9d0e8.1558028966.git.jpoimboe@redhat.com Link: https://github.com/ClangBuiltLinux/linux/issues/481 Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8ea58f1e8b11cca3087b294779bf5959bf89cc10 upstream.

Currently, this Makefile hardcodes GNU ar, meaning that if it is not
available, there is no way to supply a different one and the build will
fail.

  $ make AR=llvm-ar CC=clang LD=ld.lld HOSTAR=llvm-ar HOSTCC=clang \
         HOSTLD=ld.lld HOSTLDFLAGS=-fuse-ld=lld defconfig modules_prepare
  ...
    AR       /out/tools/objtool/libsubcmd.a
  /bin/sh: 1: ar: not found
  ...

Follow the logic of HOST{CC,LD} and allow the user to specify a
different ar tool via HOSTAR (which is used elsewhere in other
tools/ Makefiles).

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Cc: <stable@vger.kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/80822a9353926c38fd7a152991c6292491a9d0e8.1558028966.git.jpoimboe@redhat.com
Link: https://github.com/ClangBuiltLinux/linux/issues/481
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>