linux.git/tools/perf/util, branch v5.4.64

perf probe: Fix memory leakage when the probe point is not found

2020-08-26T08:40:48+00:00

[ Upstream commit 12d572e785b15bc764e956caaa8a4c846fd15694 ]

Fix the memory leakage in debuginfo__find_trace_events() when the probe
point is not found in the debuginfo. If there is no probe point found in
the debuginfo, debuginfo__find_probes() will NOT return -ENOENT, but 0.

Thus the caller of debuginfo__find_probes() must check the tf.ntevs and
release the allocated memory for the array of struct probe_trace_event.

The current code releases the memory only if the debuginfo__find_probes()
hits an error but not checks tf.ntevs. In the result, the memory allocated
on *tevs are not released if tf.ntevs == 0.

This fixes the memory leakage by checking tf.ntevs == 0 in addition to
ret < 0.

Fixes: ff741783506c ("perf probe: Introduce debuginfo to encapsulate dwarf information")
Signed-off-by: Masami Hiramatsu 
Reviewed-by: Srikar Dronamraju 
Cc: Andi Kleen 
Cc: Oleg Nesterov 
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/159438668346.62703.10887420400718492503.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Sasha Levin

perf intel-pt: Fix duplicate branch after CBR

2020-08-21T11:05:29+00:00

commit a58a057ce65b52125dd355b7d8b0d540ea267a5f upstream.

CBR events can result in a duplicate branch event, because the state
type defaults to a branch. Fix by clearing the state type.

Example: trace 'sleep' and hope for a frequency change

 Before:

   $ perf record -e intel_pt//u sleep 0.1
   [ perf record: Woken up 1 times to write data ]
   [ perf record: Captured and wrote 0.034 MB perf.data ]
   $ perf script --itrace=bpe > before.txt

 After:

   $ perf script --itrace=bpe > after.txt
   $ diff -u before.txt after.txt
#  --- before.txt  2020-07-07 14:42:18.191508098 +0300
#  +++ after.txt   2020-07-07 14:42:36.587891753 +0300
   @@ -29673,7 +29673,6 @@
               sleep 93431 [007] 15411.619905:          1  branches:u:                 0 [unknown] ([unknown]) =>     7f0818abb2e0 clock_nanosleep@@GLIBC_2.17+0x0 (/usr/lib/x86_64-linux-gnu/libc-2.31.so)
               sleep 93431 [007] 15411.619905:          1  branches:u:      7f0818abb30c clock_nanosleep@@GLIBC_2.17+0x2c (/usr/lib/x86_64-linux-gnu/libc-2.31.so) =>                0 [unknown] ([unknown])
               sleep 93431 [007] 15411.720069:         cbr:  cbr: 15 freq: 1507 MHz ( 56%)         7f0818abb30c clock_nanosleep@@GLIBC_2.17+0x2c (/usr/lib/x86_64-linux-gnu/libc-2.31.so)
   -           sleep 93431 [007] 15411.720069:          1  branches:u:      7f0818abb30c clock_nanosleep@@GLIBC_2.17+0x2c (/usr/lib/x86_64-linux-gnu/libc-2.31.so) =>                0 [unknown] ([unknown])
               sleep 93431 [007] 15411.720076:          1  branches:u:                 0 [unknown] ([unknown]) =>     7f0818abb30e clock_nanosleep@@GLIBC_2.17+0x2e (/usr/lib/x86_64-linux-gnu/libc-2.31.so)
               sleep 93431 [007] 15411.720077:          1  branches:u:      7f0818abb323 clock_nanosleep@@GLIBC_2.17+0x43 (/usr/lib/x86_64-linux-gnu/libc-2.31.so) =>     7f0818ac0eb7 __nanosleep+0x17 (/usr/lib/x86_64-linux-gnu/libc-2.31.so)
               sleep 93431 [007] 15411.720077:          1  branches:u:      7f0818ac0ebf __nanosleep+0x1f (/usr/lib/x86_64-linux-gnu/libc-2.31.so) =>     55cb7e4c2827 rpl_nanosleep+0x97 (/usr/bin/sleep)

Fixes: 91de8684f1cff ("perf intel-pt: Cater for CBR change in PSB+")
Fixes: abe5a1d3e4bee ("perf intel-pt: Decoder to output CBR changes immediately")
Signed-off-by: Adrian Hunter 
Reviewed-by: Andi Kleen 
Tested-by: Arnaldo Carvalho de Melo 
Cc: Jiri Olsa 
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200710151104.15137-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Greg Kroah-Hartman

perf intel-pt: Fix FUP packet state

2020-08-21T11:05:29+00:00

commit 401136bb084fd021acd9f8c51b52fe0a25e326b2 upstream.

While walking code towards a FUP ip, the packet state is
INTEL_PT_STATE_FUP or INTEL_PT_STATE_FUP_NO_TIP. That was mishandled
resulting in the state becoming INTEL_PT_STATE_IN_SYNC prematurely.  The
result was an occasional lost EXSTOP event.

Signed-off-by: Adrian Hunter 
Reviewed-by: Andi Kleen 
Cc: Jiri Olsa 
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200710151104.15137-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Greg Kroah-Hartman

perf env: Do not return pointers to local variables

2020-08-05T07:59:52+00:00

commit ebcb9464a2ae3a547e97de476575c82ece0e93e2 upstream.

It is possible to return a pointer to a local variable when looking up
the architecture name for the running system and no normalization is
done on that value, i.e. we may end up returning the uts.machine local
variable.

While this doesn't happen on most arches, as normalization takes place,
lets fix this by making that a static variable and optimize it a bit by
not always running uname(), only the first time.

Noticed in fedora rawhide running with:

  [perfbuilder@a5ff49d6e6e4 ~]$ gcc --version
  gcc (GCC) 10.0.1 20200216 (Red Hat 10.0.1-0.8)

Reported-by: Jiri Olsa 
Cc: Adrian Hunter 
Cc: Namhyung Kim 
Signed-off-by: Arnaldo Carvalho de Melo 
Cc: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman

perf stat: Zero all the 'ena' and 'run' array slot stats for interval mode

2020-07-22T07:33:05+00:00

commit 0e0bf1ea1147fcf74eab19c2d3c853cc3740a72f upstream.

As the code comments in perf_stat_process_counter() say, we calculate
counter's data every interval, and the display code shows ps->res_stats
avg value. We need to zero the stats for interval mode.

But the current code only zeros the res_stats[0], it doesn't zero the
res_stats[1] and res_stats[2], which are for ena and run of counter.

This patch zeros the whole res_stats[] for interval mode.

Fixes: 51fd2df1e882 ("perf stat: Fix interval output values")
Signed-off-by: Jin Yao 
Cc: Alexander Shishkin 
Cc: Andi Kleen 
Cc: Jin Yao 
Cc: Jiri Olsa 
Cc: Kan Liang 
Cc: Peter Zijlstra 
Link: http://lore.kernel.org/lkml/20200409070755.17261-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Greg Kroah-Hartman

perf intel-pt: Fix PEBS sample for XMM registers

2020-07-16T06:16:39+00:00

[ Upstream commit 4c95ad261cfac120dd66238fcae222766754c219 ]

The condition to add XMM registers was missing, the regs array needed to
be in the outer scope, and the size of the regs array was too small.

Fixes: 143d34a6b387b ("perf intel-pt: Add XMM registers to synthesized PEBS sample")
Signed-off-by: Adrian Hunter 
Cc: Jiri Olsa 
Cc: Luwei Kang 
Link: http://lore.kernel.org/lkml/20200630133935.11150-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Sasha Levin

perf intel-pt: Fix recording PEBS-via-PT with registers

2020-07-16T06:16:38+00:00

[ Upstream commit 75bcb8776dc987538f267ba4ba05ca43fc2b1676 ]

When recording PEBS-via-PT, the kernel will not accept the intel_pt
event with register sampling e.g.

 # perf record --kcore -c 10000 -e '{intel_pt/branch=0/,branch-loads/aux-output/ppp}' -I -- ls -l
 Error:
 intel_pt/branch=0/: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat'

Fix by suppressing register sampling on the intel_pt evsel.

Committer notes:

Adrian informed that this is only available from Tremont onwards, so on
older processors the error continues the same as before.

Fixes: 9e64cefe4335b ("perf intel-pt: Process options for PEBS event synthesis")
Signed-off-by: Adrian Hunter 
Cc: Jiri Olsa 
Cc: Luwei Kang 
Link: http://lore.kernel.org/lkml/20200630133935.11150-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Sasha Levin

perf stat: Fix NULL pointer dereference

2020-06-24T15:50:45+00:00

[ Upstream commit c0c652fc705de75f4ba52e93053acc1ed3933e74 ]

If config->aggr_map is NULL and config->aggr_get_id is not NULL,
the function print_aggr() will still calling arrg_update_shadow(),
which can result in accessing the invalid pointer.

Fixes: 088519f318be ("perf stat: Move the display functions to stat-display.c")
Signed-off-by: Hongbo Yao 
Cc: Alexander Shishkin 
Cc: Jiri Olsa 
Cc: Mark Rutland 
Cc: Namhyung Kim 
Cc: Wei Li 
Link: https://lore.kernel.org/lkml/20200608163625.GC3073@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Sasha Levin

perf symbols: Fix kernel maps for kcore and eBPF

2020-06-22T07:31:27+00:00

commit 0affd0e5262b6d40f5f63466d88933e99698e240 upstream.

Adjust 'map->pgoff' also when moving a map's start address.

Example with v5.4.34 based kernel:

  Before:

    $ sudo tools/perf/perf record -a --kcore -e intel_pt//k sleep 1
    [ perf record: Woken up 1 times to write data ]
    [ perf record: Captured and wrote 1.958 MB perf.data ]
    $ sudo tools/perf/perf script --itrace=e >/dev/null
    Warning:
    961 instruction trace errors

  After:

    $ sudo tools/perf/perf script --itrace=e >/dev/null
    $

Committer testing:

  # uname -a
  Linux seventh 5.6.10-100.fc30.x86_64 #1 SMP Mon May 4 15:36:44 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
  #

Before:

  # perf record -a --kcore -e intel_pt//k sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.923 MB perf.data ]
  # perf script --itrace=e >/dev/null
  Warning:
  295 instruction trace errors
  #

After:

  # perf record -a --kcore -e intel_pt//k sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.919 MB perf.data ]
  # perf script --itrace=e >/dev/null
  #

Fixes: fb5a88d4131a ("perf tools: Preserve eBPF maps when loading kcore")
Signed-off-by: Adrian Hunter 
Tested-by: Arnaldo Carvalho de Melo 
Cc: Jiri Olsa 
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200602112505.1406-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Greg Kroah-Hartman

perf symbols: Fix debuginfo search for Ubuntu

2020-06-22T07:31:27+00:00

commit 85afd35575a3c1a3a905722dde5ee70b49282e70 upstream.

Reportedly, from 19.10 Ubuntu has begun mixing up the location of some
debug symbol files, putting files expected to be in
/usr/lib/debug/usr/lib into /usr/lib/debug/lib instead. Fix by adding
another dso_binary_type.

Example on Ubuntu 20.04

  Before:

    $ perf record -e intel_pt//u uname
    Linux
    [ perf record: Woken up 1 times to write data ]
    [ perf record: Captured and wrote 0.030 MB perf.data ]
    $ perf script --call-trace | head -5
           uname 14003 [005] 15321.764958566:  cbr: 42 freq: 4219 MHz (156%)
           uname 14003 [005] 15321.764958566: (/usr/lib/x86_64-linux-gnu/ld-2.31.so              )          7f1e71cc4100
           uname 14003 [005] 15321.764961566: (/usr/lib/x86_64-linux-gnu/ld-2.31.so              )              7f1e71cc4df0
           uname 14003 [005] 15321.764961900: (/usr/lib/x86_64-linux-gnu/ld-2.31.so              )              7f1e71cc4e18
           uname 14003 [005] 15321.764963233: (/usr/lib/x86_64-linux-gnu/ld-2.31.so              )              7f1e71cc5128

  After:

    $ perf script --call-trace | head -5
           uname 14003 [005] 15321.764958566:  cbr: 42 freq: 4219 MHz (156%)
           uname 14003 [005] 15321.764958566: (/usr/lib/x86_64-linux-gnu/ld-2.31.so              )      _start
           uname 14003 [005] 15321.764961566: (/usr/lib/x86_64-linux-gnu/ld-2.31.so              )          _dl_start
           uname 14003 [005] 15321.764961900: (/usr/lib/x86_64-linux-gnu/ld-2.31.so              )          _dl_start
           uname 14003 [005] 15321.764963233: (/usr/lib/x86_64-linux-gnu/ld-2.31.so              )          _dl_start

Reported-by: Travis Downs 
Signed-off-by: Adrian Hunter 
Cc: Jiri Olsa 
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200526155207.9172-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Greg Kroah-Hartman