[ Upstream commit 61f7e318e99d3b398670518dd3f4f8510d1800fc ]

If a default variable contains itself, do not recurse on it.

For example:

  ADD_CONFIG := ${CONFIG_DIR}/temp_config
  DEFAULTS
  ADD_CONFIG = ${CONFIG_DIR}/default_config ${ADD_CONFIG}

The above works because the temp variable ADD_CONFIG (is a temp because it
is created with ":=") is already defined, it will be substituted in the
variable option. But if it gets commented out:

  # ADD_CONFIG := ${CONFIG_DIR}/temp_config
  DEFAULTS
  ADD_CONFIG = ${CONFIG_DIR}/default_config ${ADD_CONFIG}

Then the above will go into a recursive loop where ${ADD_CONFIG} will
get replaced with the current definition of ADD_CONFIG which contains the
${ADD_CONFIG} and that will also try to get converted. ktest.pl will error
after 100 attempts of recursion and fail.

When replacing a variable with the default variable, if the default
variable contains itself, do not replace it.

Cc: "John Warthog9 Hawley" <warthog9@kernel.org>
Cc: Dhaval Giani <dhaval.giani@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/20250718202053.732189428@kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 5a1bed232781d356f842576daacc260f0d0c8d2e ]

Handle missing parent directories for LOG_FILE path to prevent test
failures. If the parent directories don't exist, create them to ensure
the tests proceed successfully.

Cc: <warthog9@eaglescrag.net>
Link: https://lore.kernel.org/20250307043854.2518539-1-Ayush.jain3@amd.com
Signed-off-by: Ayush Jain <Ayush.jain3@amd.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

commit a4e17a8f239a545c463f8ec27db4ed6e74b31841 upstream.

In the case of a test that uses the special option ${KERNEL_VERSION} in one
of its settings but has no configuration available in ${OUTPUT_DIR}, for
example if it's a new empty directory, then the `make kernelrelease` call
will fail and the subroutine will chomp an empty string, silently. Fix that
by adding an empty configuration and retrying.

Cc: stable@vger.kernel.org
Cc: John Hawley <warthog9@eaglescrag.net>
Fixes: 5f9b6ced04a4e ("ktest: Bisecting, install modules, add logging")
Link: https://lore.kernel.org/20241205-ktest_kver_fallback-v2-1-869dae4c7777@suse.com
Signed-off-by: Ricardo B. Marliere <rbm@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 776735b954f49f85fd19e1198efa421fae2ad77c ]

Since $output and $ret are not used in the subsequent code, the declarations
should be removed.

Fixes: a75fececff3c ("ktest: Added sample.conf, new %default option format")
Link: https://lore.kernel.org/20240902130735.6034-1-bajing@cmss.chinamobile.com
Signed-off-by: Ba Jing <bajing@cmss.chinamobile.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Some distros have grub2 config files with the lines

    if [ x"${feature_menuentry_id}" = xy ]; then
      menuentry_id_option="--id"
    else
      menuentry_id_option=""
    fi

which match the skip regex defined for grub2 in get_grub_index():

    $skip = '^\s*menuentry';

These false positives cause the grub number to be higher than it
should be, and the wrong kernel can end up booting.

Grub documents the menuentry command with whitespace between it and the
title, so make the skip regex reflect this.

Link: https://lore.kernel.org/20240904175530.84175-1-daniel.m.jordan@oracle.com
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Acked-by: John 'Warthog9' Hawley (Tenstorrent) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

If a warning happens at build, give a warning at the end:

  Build time:   1 minute 40 seconds
  Install time: 17 seconds
  Reboot time:  25 seconds

  *** WARNING found in build: 1 ***

  *******************************************
  *******************************************
  KTEST RESULT: TEST 1 SUCCESS!!!!   **
  *******************************************
  *******************************************

This way, even if the test isn't made to fail on warnings during the
build, a message is still displayed that warnings were found.

Link: https://lore.kernel.org/<20240819172028.3a7fae09@gandalf.local.home>
Acked-by: John 'Warthog9' Hawley (Tenstorrent) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

The test type "make_warnings_file" should have no mandatory configuration
parameters other than the ones required by the "build" test type, because
its purpose is to create a file with build warnings that may or may not be
used by other subsequent tests. Currently, the only way to use it as a
stand-alone test is by setting POWER_CYCLE, CONSOLE, SSH_USER,
BUILD_TARGET, TARGET_IMAGE, REBOOT_TYPE and GRUB_MENU.

Link: https://lkml.kernel.org/r/20240315-ktest-v2-1-c5c20a75f6a3@marliere.net

Cc: John Hawley <warthog9@eaglescrag.net>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Allow a variable to contain another variable. This will allow the
${shell <command>} to have its command include variables.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

The do_send_email() will call die before restoring stty if sendmail
setting is not correct or sendmail is not installed. It is safer to
restore it in the beginning of dodie().

Link: https://lkml.kernel.org/r/167420617635.2988775.13045295332829029437.stgit@devnote3

Cc: John 'Warthog9' Hawley <warthog9@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

There is a disconnect between the run_command function and the
wait_for_input. The wait_for_input has a default timeout of 2 minutes. But
if that happens, the run_command loop will exit out to the waitpid() of
the executing command. This fails in that it no longer monitors the
command, and also, the ssh to the test box can hang when its finished, as
it's waiting for the pipe it's writing to to flush, but the loop that
reads that pipe has already exited, leaving the command stuck, and the
test hangs.

Instead, make the default "wait_for_input" of the run_command infinite,
and allow the user to override it if they want with a default timeout
option "RUN_TIMEOUT".

But this fixes the hang that happens when the pipe is full and the ssh
session never exits.

Cc: stable@vger.kernel.org
Fixes: 6e98d1b4415fe ("ktest: Add timeout to ssh command")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>