linux.git/tools/testing/selftests/drivers/net, branch v5.12.5 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git selftests: mlxsw: Fix mausezahn invocation in ERSPAN scale test 2021-05-19T08:56:20+00:00 Petr Machata petrm@nvidia.com 2021-04-23T12:19:48+00:00 d3f0131b86a9a016eb1577d556f540097675f1a5 [ Upstream commit 1233898ab758cbcf5f6fea10b8dd16a0b2c24fab ] The mirror_gre_scale test creates as many ERSPAN sessions as the underlying chip supports, and tests that they all work. In order to determine that it issues a stream of ICMP packets and checks if they are mirrored as expected. However, the mausezahn invocation missed the -6 flag to identify the use of IPv6 protocol, and was sending ICMP messages over IPv6, as opposed to ICMP6. It also didn't pass an explicit source IP address, which apparently worked at some point in the past, but does not anymore. To fix these issues, extend the function mirror_test() in mirror_lib by detecting the IPv6 protocol addresses, and using a different ICMP scheme. Fix __mirror_gre_test() in the selftest itself to pass a source IP address. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 1233898ab758cbcf5f6fea10b8dd16a0b2c24fab ]

The mirror_gre_scale test creates as many ERSPAN sessions as the underlying
chip supports, and tests that they all work. In order to determine that it
issues a stream of ICMP packets and checks if they are mirrored as
expected.

However, the mausezahn invocation missed the -6 flag to identify the use of
IPv6 protocol, and was sending ICMP messages over IPv6, as opposed to
ICMP6. It also didn't pass an explicit source IP address, which apparently
worked at some point in the past, but does not anymore.

To fix these issues, extend the function mirror_test() in mirror_lib by
detecting the IPv6 protocol addresses, and using a different ICMP scheme.
Fix __mirror_gre_test() in the selftest itself to pass a source IP address.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
selftests: mlxsw: Increase the tolerance of backlog buildup 2021-05-19T08:56:19+00:00 Petr Machata petrm@nvidia.com 2021-04-23T12:19:47+00:00 cbcf354333eaac86aed0df2fe011f15b47023395 [ Upstream commit dda7f4fa55839baeb72ae040aeaf9ccf89d3e416 ] The intention behind this test is to make sure that qdisc limit is correctly projected to the HW. However, first, due to rounding in the qdisc, and then in the driver, the number cannot actually be accurate. And second, the approach to testing this is to oversubscribe the port with traffic generated on the same switch. The actual backlog size therefore fluctuates. In practice, this test proved to be noisier than the rest, and spuriously fails every now and then. Increase the tolerance to 10 % to avoid these issues. Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit dda7f4fa55839baeb72ae040aeaf9ccf89d3e416 ]

The intention behind this test is to make sure that qdisc limit is
correctly projected to the HW. However, first, due to rounding in the
qdisc, and then in the driver, the number cannot actually be accurate. And
second, the approach to testing this is to oversubscribe the port with
traffic generated on the same switch. The actual backlog size therefore
fluctuates.

In practice, this test proved to be noisier than the rest, and spuriously
fails every now and then. Increase the tolerance to 10 % to avoid these
issues.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
selftests: mlxsw: Remove a redundant if statement in tc_flower_scale test 2021-05-14T08:53:03+00:00 Danielle Ratson danieller@nvidia.com 2021-04-23T12:19:45+00:00 dc4b143319f872d10c6548f943a1ff57b0520304 [ Upstream commit 1f1c92139e36223b89d8140f2b72f75e79baf8bd ] Currently, the error return code of the failure condition is lost after using an if statement, so the test doesn't fail when it should. Remove the if statement that separates the condition and the error code check, so the test won't always pass. Fixes: abfce9e062021 ("selftests: mlxsw: Reduce running time using offload indication") Reported-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Danielle Ratson <danieller@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 1f1c92139e36223b89d8140f2b72f75e79baf8bd ]

Currently, the error return code of the failure condition is lost after
using an if statement, so the test doesn't fail when it should.

Remove the if statement that separates the condition and the error code
check, so the test won't always pass.

Fixes: abfce9e062021 ("selftests: mlxsw: Reduce running time using offload indication")
Reported-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
selftests: mlxsw: Remove a redundant if statement in port_scale test 2021-05-14T08:53:03+00:00 Danielle Ratson danieller@nvidia.com 2021-04-23T12:19:44+00:00 92aa8a27b47069c069ed7cc6373903d072b84462 [ Upstream commit b6fc2f212108b3676f54d00a2c38e3bc36753980 ] Currently, the error return code of the failure condition is lost after using an if statement, so the test doesn't fail when it should. Remove the if statement that separates the condition and the error code check, so the test won't always pass. Fixes: 5154b1b826d9b ("selftests: mlxsw: Add a scale test for physical ports") Reported-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Danielle Ratson <danieller@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b6fc2f212108b3676f54d00a2c38e3bc36753980 ]

Currently, the error return code of the failure condition is lost after
using an if statement, so the test doesn't fail when it should.

Remove the if statement that separates the condition and the error code
check, so the test won't always pass.

Fixes: 5154b1b826d9b ("selftests: mlxsw: Add a scale test for physical ports")
Reported-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
selftests: netdevsim: Test route offload failure notifications 2021-02-09T00:47:03+00:00 Amit Cohen amcohen@nvidia.com 2021-02-07T08:22:58+00:00 9ee53e37532f006ce90340b527b225811f62d191 Add cases to verify that when debugfs variable "fail_route_offload" is set, notification with "rt_offload_failed" flag is received. Extend the existing cases to verify that when sysctl "fib_notify_on_flag_change" is set to 2, the kernel emits notifications only for failed route installation. $ ./fib_notifications.sh TEST: IPv4 route addition [ OK ] TEST: IPv4 route deletion [ OK ] TEST: IPv4 route replacement [ OK ] TEST: IPv4 route offload failed [ OK ] TEST: IPv6 route addition [ OK ] TEST: IPv6 route deletion [ OK ] TEST: IPv6 route replacement [ OK ] TEST: IPv6 route offload failed [ OK ] Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Add cases to verify that when debugfs variable "fail_route_offload" is
set, notification with "rt_offload_failed" flag is received.

Extend the existing cases to verify that when sysctl
"fib_notify_on_flag_change" is set to 2, the kernel emits notifications
only for failed route installation.

$ ./fib_notifications.sh
TEST: IPv4 route addition				[ OK ]
TEST: IPv4 route deletion				[ OK ]
TEST: IPv4 route replacement				[ OK ]
TEST: IPv4 route offload failed				[ OK ]
TEST: IPv6 route addition				[ OK ]
TEST: IPv6 route deletion				[ OK ]
TEST: IPv6 route replacement				[ OK ]
TEST: IPv6 route offload failed				[ OK ]

Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net: selftests: Add lanes setting test 2021-02-04T02:37:29+00:00 Danielle Ratson danieller@nvidia.com 2021-02-02T18:06:12+00:00 f72e2f48c71051f54e6fa214dc57f586386173b5 Test that setting lanes parameter is working. Set max speed and max lanes in the list of advertised link modes, and then try to set max speed with the lanes below max lanes if exists in the list. And then, test that setting number of lanes larger than max lanes fails. Do the above for both autoneg on and off. $ ./ethtool_lanes.sh TEST: 4 lanes is autonegotiated [ OK ] TEST: Lanes number larger than max width is not set [ OK ] TEST: Autoneg off, 4 lanes detected during force mode [ OK ] TEST: Lanes number larger than max width is not set [ OK ] Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Test that setting lanes parameter is working.

Set max speed and max lanes in the list of advertised link modes,
and then try to set max speed with the lanes below max lanes if exists
in the list.

And then, test that setting number of lanes larger than max lanes fails.

Do the above for both autoneg on and off.

$ ./ethtool_lanes.sh

TEST: 4 lanes is autonegotiated                                     [ OK ]
TEST: Lanes number larger than max width is not set                 [ OK ]
TEST: Autoneg off, 4 lanes detected during force mode               [ OK ]
TEST: Lanes number larger than max width is not set                 [ OK ]

Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
selftests: netdevsim: Add fib_notifications test 2021-02-03T01:45:59+00:00 Amit Cohen amcohen@nvidia.com 2021-02-01T19:47:57+00:00 19d36d2971e671cd1b7f4174ef5e21c341ec7690 Add test to check fib notifications behavior. The test checks route addition, route deletion and route replacement for both IPv4 and IPv6. When fib_notify_on_flag_change=0, expect single notification for route addition/deletion/replacement. When fib_notify_on_flag_change=1, expect: - two notification for route addition/replacement, first without RTM_F_TRAP and second with RTM_F_TRAP. - single notification for route deletion. $ ./fib_notifications.sh TEST: IPv4 route addition [ OK ] TEST: IPv4 route deletion [ OK ] TEST: IPv4 route replacement [ OK ] TEST: IPv6 route addition [ OK ] TEST: IPv6 route deletion [ OK ] TEST: IPv6 route replacement [ OK ] Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Add test to check fib notifications behavior.

The test checks route addition, route deletion and route replacement for
both IPv4 and IPv6.

When fib_notify_on_flag_change=0, expect single notification for route
addition/deletion/replacement.

When fib_notify_on_flag_change=1, expect:
- two notification for route addition/replacement, first without RTM_F_TRAP
  and second with RTM_F_TRAP.
- single notification for route deletion.

$ ./fib_notifications.sh
TEST: IPv4 route addition                                           [ OK ]
TEST: IPv4 route deletion                                           [ OK ]
TEST: IPv4 route replacement                                        [ OK ]
TEST: IPv6 route addition                                           [ OK ]
TEST: IPv6 route deletion                                           [ OK ]
TEST: IPv6 route replacement                                        [ OK ]

Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
selftests: Extend fib tests to run with and without flags notifications 2021-02-03T01:45:59+00:00 Amit Cohen amcohen@nvidia.com 2021-02-01T19:47:56+00:00 d1a7a489287cebeb3ff3d1a114f5eb7d3641793b Run the test cases with both `fib_notify_on_flag_change` sysctls set to '1', and then with both sysctls set to '0' to verify there are no regressions in the test when notifications are added. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Run the test cases with both `fib_notify_on_flag_change` sysctls set to
'1', and then with both sysctls set to '0' to verify there are no
regressions in the test when notifications are added.

Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
selftests: mlxsw: Add a scale test for physical ports 2021-01-23T04:42:13+00:00 Danielle Ratson danieller@nvidia.com 2021-01-21T13:10:24+00:00 5154b1b826d9b3e4365e0ca8c864ba28cd305041 Query the maximum number of supported physical ports using devlink-resource and test that this number can be reached by splitting each of the splittable ports to its width. Test that an error is returned in case the maximum number is exceeded. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Query the maximum number of supported physical ports using devlink-resource
and test that this number can be reached by splitting each of the
splittable ports to its width. Test that an error is returned in case
the maximum number is exceeded.

Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge tag 'net-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2021-01-05T20:38:56+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-01-05T20:38:56+00:00 aa35e45cd42aa249562c65e440c8d69fb84945d9 Pull networking fixes from Jakub Kicinski: "Networking fixes, including fixes from netfilter, wireless and bpf trees. Current release - regressions: - mt76: fix NULL pointer dereference in mt76u_status_worker and mt76s_process_tx_queue - net: ipa: fix interconnect enable bug Current release - always broken: - netfilter: fixes possible oops in mtype_resize in ipset - ath11k: fix number of coding issues found by static analysis tools and spurious error messages Previous releases - regressions: - e1000e: re-enable s0ix power saving flows for systems with the Intel i219-LM Ethernet controllers to fix power use regression - virtio_net: fix recursive call to cpus_read_lock() to avoid a deadlock - ipv4: ignore ECN bits for fib lookups in fib_compute_spec_dst() - sysfs: take the rtnl lock around XPS configuration - xsk: fix memory leak for failed bind and rollback reservation at NETDEV_TX_BUSY - r8169: work around power-saving bug on some chip versions Previous releases - always broken: - dcb: validate netlink message in DCB handler - tun: fix return value when the number of iovs exceeds MAX_SKB_FRAGS to prevent unnecessary retries - vhost_net: fix ubuf refcount when sendmsg fails - bpf: save correct stopping point in file seq iteration - ncsi: use real net-device for response handler - neighbor: fix div by zero caused by a data race (TOCTOU) - bareudp: fix use of incorrect min_headroom size and a false positive lockdep splat from the TX lock - mvpp2: - clear force link UP during port init procedure in case bootloader had set it - add TCAM entry to drop flow control pause frames - fix PPPoE with ipv6 packet parsing - fix GoP Networking Complex Control config of port 3 - fix pkt coalescing IRQ-threshold configuration - xsk: fix race in SKB mode transmit with shared cq - ionic: account for vlan tag len in rx buffer len - stmmac: ignore the second clock input, current clock framework does not handle exclusive clock use well, other drivers may reconfigure the second clock Misc: - ppp: change PPPIOCUNBRIDGECHAN ioctl request number to follow existing scheme" * tag 'net-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits) net: dsa: lantiq_gswip: Fix GSWIP_MII_CFG(p) register access net: dsa: lantiq_gswip: Enable GSWIP_MII_CFG_EN also for internal PHYs net: lapb: Decrease the refcount of "struct lapb_cb" in lapb_device_event r8169: work around power-saving bug on some chip versions net: usb: qmi_wwan: add Quectel EM160R-GL selftests: mlxsw: Set headroom size of correct port net: macb: Correct usage of MACB_CAPS_CLK_HW_CHG flag ibmvnic: fix: NULL pointer dereference. docs: networking: packet_mmap: fix old config reference docs: networking: packet_mmap: fix formatting for C macros vhost_net: fix ubuf refcount incorrectly when sendmsg fails bareudp: Fix use of incorrect min_headroom size bareudp: set NETIF_F_LLTX flag net: hdlc_ppp: Fix issues when mod_timer is called while timer is running atlantic: remove architecture depends erspan: fix version 1 check in gre_parse_header() net: hns: fix return value check in __lb_other_process() net: sched: prevent invalid Scell_log shift count net: neighbor: fix a crash caused by mod zero ipv4: Ignore ECN bits for fib lookups in fib_compute_spec_dst() ... 
Pull networking fixes from Jakub Kicinski:
 "Networking fixes, including fixes from netfilter, wireless and bpf
  trees.

  Current release - regressions:

   - mt76: fix NULL pointer dereference in mt76u_status_worker and
     mt76s_process_tx_queue

   - net: ipa: fix interconnect enable bug

  Current release - always broken:

   - netfilter: fixes possible oops in mtype_resize in ipset

   - ath11k: fix number of coding issues found by static analysis tools
     and spurious error messages

  Previous releases - regressions:

   - e1000e: re-enable s0ix power saving flows for systems with the
     Intel i219-LM Ethernet controllers to fix power use regression

   - virtio_net: fix recursive call to cpus_read_lock() to avoid a
     deadlock

   - ipv4: ignore ECN bits for fib lookups in fib_compute_spec_dst()

   - sysfs: take the rtnl lock around XPS configuration

   - xsk: fix memory leak for failed bind and rollback reservation at
     NETDEV_TX_BUSY

   - r8169: work around power-saving bug on some chip versions

  Previous releases - always broken:

   - dcb: validate netlink message in DCB handler

   - tun: fix return value when the number of iovs exceeds MAX_SKB_FRAGS
     to prevent unnecessary retries

   - vhost_net: fix ubuf refcount when sendmsg fails

   - bpf: save correct stopping point in file seq iteration

   - ncsi: use real net-device for response handler

   - neighbor: fix div by zero caused by a data race (TOCTOU)

   - bareudp: fix use of incorrect min_headroom size and a false
     positive lockdep splat from the TX lock

   - mvpp2:
      - clear force link UP during port init procedure in case
        bootloader had set it
      - add TCAM entry to drop flow control pause frames
      - fix PPPoE with ipv6 packet parsing
      - fix GoP Networking Complex Control config of port 3
      - fix pkt coalescing IRQ-threshold configuration

   - xsk: fix race in SKB mode transmit with shared cq

   - ionic: account for vlan tag len in rx buffer len

   - stmmac: ignore the second clock input, current clock framework does
     not handle exclusive clock use well, other drivers may reconfigure
     the second clock

  Misc:

   - ppp: change PPPIOCUNBRIDGECHAN ioctl request number to follow
     existing scheme"

* tag 'net-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
  net: dsa: lantiq_gswip: Fix GSWIP_MII_CFG(p) register access
  net: dsa: lantiq_gswip: Enable GSWIP_MII_CFG_EN also for internal PHYs
  net: lapb: Decrease the refcount of "struct lapb_cb" in lapb_device_event
  r8169: work around power-saving bug on some chip versions
  net: usb: qmi_wwan: add Quectel EM160R-GL
  selftests: mlxsw: Set headroom size of correct port
  net: macb: Correct usage of MACB_CAPS_CLK_HW_CHG flag
  ibmvnic: fix: NULL pointer dereference.
  docs: networking: packet_mmap: fix old config reference
  docs: networking: packet_mmap: fix formatting for C macros
  vhost_net: fix ubuf refcount incorrectly when sendmsg fails
  bareudp: Fix use of incorrect min_headroom size
  bareudp: set NETIF_F_LLTX flag
  net: hdlc_ppp: Fix issues when mod_timer is called while timer is running
  atlantic: remove architecture depends
  erspan: fix version 1 check in gre_parse_header()
  net: hns: fix return value check in __lb_other_process()
  net: sched: prevent invalid Scell_log shift count
  net: neighbor: fix a crash caused by mod zero
  ipv4: Ignore ECN bits for fib lookups in fib_compute_spec_dst()
  ...