linux.git/tools/testing, branch v4.18.19

selftests/powerpc: Fix ptrace tm failure

2018-11-13T19:12:52+00:00

commit 48dc0ef19044bfb69193302fbe3a834e3331b7ae upstream.

Test ptrace-tm-spd-gpr fails on current kernel (4.19) due to a segmentation
fault that happens on the child process prior to setting cptr[2] = 1. This
causes the parent process to wait forever at 'while (!pptr[2])' and the test to
be killed by the test harness framework by timeout, thus, failing.

The segmentation fault happens because of a inline assembly being
generated as:

	0x10000355c     lfs    f0, 0(0)

This is reading memory position 0x0 and causing the segmentation fault.

This code is being generated by ASM_LOAD_FPR_SINGLE_PRECISION(flt_4), where
flt_4 is passed to the inline assembly block as:

	[flt_4] "r" (&d)

Since the inline assembly 'r' constraint means any GPR, gpr0 is being
chosen, thus causing this issue when issuing a Load Floating-Point Single
instruction.

This patch simply changes the constraint to 'b', which specify that this
register will be used as base, and r0 is not allowed to be used, avoiding
this issue.

Other than that, removing flt_2 register from the input operands, since it
is not used by the inline assembly code at all.

Cc: stable@vger.kernel.org
Signed-off-by: Breno Leitao 
Acked-by: Segher Boessenkool 
Signed-off-by: Michael Ellerman 
Signed-off-by: Greg Kroah-Hartman

selftests/ftrace: Fix synthetic event test to delete event correctly

2018-11-13T19:12:52+00:00

commit 0d0352d8b3d6d7ca9a710b40e194cbbaeb841c88 upstream.

Fix the synthetic event test case to remove event correctly.
If redirecting command to synthetic_event file without append
mode, it cleans up all existing events and execute (parse) the
command. This means "delete event" always fails to find the
target event.

Since previous synthetic event has a bug which doesn't return
-ENOENT even if it fails to find the deleting event, this test
passed. But fixing that bug, this test fails because this test
itself has a bug.

This fixes that bug by trying to delete event right after
adding an event, and use append mode redirection ('>>') instead
of normal redirection ('>').

Link: http://lkml.kernel.org/r/154013452832.25576.2305459545429386517.stgit@devbox

Acked-by: Shuah Khan 
Acked-by: Tom Zanussi 
Tested-by: Tom Zanussi 
Cc: Tom Zanussi 
Cc: Tom Zanussi 
Cc: Rajvi Jingar 
Cc: Shuah Khan 
Cc: stable@vger.kernel.org
Fixes: f06eec4d0f2c ('selftests: ftrace: Add inter-event hist triggers testcases')
Signed-off-by: Masami Hiramatsu 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

selftests: ftrace: Add synthetic event syntax testcase

2018-11-13T19:12:18+00:00

[ Upstream commit ba0e41ca81b935b958006c7120466e2217357827 ]

Add a testcase to check the syntax and field types for
synthetic_events interface.

Link: http://lkml.kernel.org/r/153986838264.18251.16627517536956299922.stgit@devbox

Acked-by: Shuah Khan 
Signed-off-by: Masami Hiramatsu 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

selftests: usbip: add wait after attach and before checking port status

2018-11-13T19:12:16+00:00

[ Upstream commit 4b0aaacee51eb6592a03fdefd5ce97558518e291 ]

Add sleep between attach and "usbip port" check to make sure status is
updated. Running attach and query back shows incorrect status.

Signed-off-by: Shuah Khan (Samsung OSG) 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

bpf: do not blindly change rlimit in reuseport net selftest

2018-11-13T19:12:16+00:00

[ Upstream commit 262f9d811c7608f1e74258ceecfe1fa213bdf912 ]

If the current process has unlimited RLIMIT_MEMLOCK,
we should should leave it as is.

Fixes: 941ff6f11c02 ("bpf: fix rlimit in reuseport net selftest")
Signed-off-by: John Sperbeck 
Signed-off-by: Eric Dumazet 
Acked-by: Daniel Borkmann 
Signed-off-by: Daniel Borkmann 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

net/ipv6: Allow onlink routes to have a device mismatch if it is the default route

2018-11-04T13:51:54+00:00

[ Upstream commit 4ed591c8ab44e711e56b8e021ffaf4f407c045f5 ]

The intent of ip6_route_check_nh_onlink is to make sure the gateway
given for an onlink route is not actually on a connected route for
a different interface (e.g., 2001:db8:1::/64 is on dev eth1 and then
an onlink route has a via 2001:db8:1::1 dev eth2). If the gateway
lookup hits the default route then it most likely will be a different
interface than the onlink route which is ok.

Update ip6_route_check_nh_onlink to disregard the device mismatch
if the gateway lookup hits the default route. Turns out the existing
onlink tests are passing because there is no default route or it is
an unreachable default, so update the onlink tests to have a default
route other than unreachable.

Fixes: fc1e64e1092f6 ("net/ipv6: Add support for onlink flag")
Signed-off-by: David Ahern 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

selftests: udpgso_bench.sh explicitly requires bash

2018-11-04T13:51:50+00:00

[ Upstream commit 12a2ea962c06efb30764c47b140d2ec9d3cd7cb0 ]

The udpgso_bench.sh script requires several bash-only features. This
may cause random failures if the default shell is not bash.
Address the above explicitly requiring bash as the script interpreter

Fixes: 3a687bef148d ("selftests: udp gso benchmark")
Signed-off-by: Paolo Abeni 
Acked-by: Willem de Bruijn 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

selftests: rtnetlink.sh explicitly requires bash.

2018-11-04T13:51:50+00:00

[ Upstream commit 3c718e677c2b35b449992adc36ecce883c467e98 ]

the script rtnetlink.sh requires a bash-only features (sleep with sub-second
precision). This may cause random test failure if the default shell is not
bash.
Address the above explicitly requiring bash as the script interpreter.

Fixes: 33b01b7b4f19 ("selftests: add rtnetlink test script")
Signed-off-by: Paolo Abeni 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

bpf: test_maps, only support ESTABLISHED socks

2018-10-20T07:47:08+00:00

[ Upstream commit 5028027844cfc6168e39650abecd817ba64c9d98 ]

Ensure that sockets added to a sock{map|hash} that is not in the
ESTABLISHED state is rejected.

Fixes: 1aa12bdf1bfb ("bpf: sockmap, add sock close() hook to remove socks")
Signed-off-by: John Fastabend 
Acked-by: Yonghong Song 
Signed-off-by: Daniel Borkmann 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

selftests: pmtu: properly redirect stderr to /dev/null

2018-10-20T07:47:07+00:00

[ Upstream commit 0a286afee5a1e8dca86d824209dbd3200294f86f ]

The cleanup function uses "$CMD 2 > /dev/null", which doesn't actually
send stderr to /dev/null, so when the netns doesn't exist, the error
message is shown. Use "2> /dev/null" instead, so that those messages
disappear, as was intended.

Fixes: d1f1b9cbf34c ("selftests: net: Introduce first PMTU test")
Signed-off-by: Sabrina Dubroca 
Acked-by: Stefano Brivio 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman