linux.git/tools/testing, branch v5.11.8

bpf, selftests: Fix up some test_verifier cases for unprivileged

2021-03-20T09:51:13+00:00

commit 0a13e3537ea67452d549a6a80da3776d6b7dedb3 upstream.

Fix up test_verifier error messages for the case where the original error
message changed, or for the case where pointer alu errors differ between
privileged and unprivileged tests. Also, add alternative tests for keeping
coverage of the original verifier rejection error message (fp alu), and
newly reject map_ptr += rX where rX == 0 given we now forbid alu on these
types for unprivileged. All test_verifier cases pass after the change. The
test case fixups were kept separate to ease backporting of core changes.

Signed-off-by: Piotr Krysiuk 
Co-developed-by: Daniel Borkmann 
Signed-off-by: Daniel Borkmann 
Acked-by: Alexei Starovoitov 
Signed-off-by: Greg Kroah-Hartman

selftests: forwarding: Fix race condition in mirror installation

2021-03-17T16:11:26+00:00

commit edcbf5137f093b5502f5f6b97cce3cbadbde27aa upstream.

When mirroring to a gretap in hardware the device expects to be
programmed with the egress port and all the encapsulating headers. This
requires the driver to resolve the path the packet will take in the
software data path and program the device accordingly.

If the path cannot be resolved (in this case because of an unresolved
neighbor), then mirror installation fails until the path is resolved.
This results in a race that causes the test to sometimes fail.

Fix this by setting the neighbor's state to permanent, so that it is
always valid.

Fixes: b5b029399fa6d ("selftests: forwarding: mirror_gre_bridge_1d_vlan: Add STP test")
Signed-off-by: Danielle Ratson 
Reviewed-by: Petr Machata 
Signed-off-by: Ido Schimmel 
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

selftests/bpf: Mask bpf_csum_diff() return value to 16 bits in test_verifier

2021-03-17T16:11:21+00:00

commit 6185266c5a853bb0f2a459e3ff594546f277609b upstream.

The verifier test labelled "valid read map access into a read-only array
2" calls the bpf_csum_diff() helper and checks its return value. However,
architecture implementations of csum_partial() (which is what the helper
uses) differ in whether they fold the return value to 16 bit or not. For
example, x86 version has ...

	if (unlikely(odd)) {
		result = from32to16(result);
		result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
	}

... while generic lib/checksum.c does:

	result = from32to16(result);
	if (odd)
		result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);

This makes the helper return different values on different architectures,
breaking the test on non-x86. To fix this, add an additional instruction
to always mask the return value to 16 bits, and update the expected return
value accordingly.

Fixes: fb2abb73e575 ("bpf, selftest: test {rd, wr}only flags and direct value access")
Signed-off-by: Yauheni Kaliuta 
Signed-off-by: Daniel Borkmann 
Link: https://lore.kernel.org/bpf/20210228103017.320240-1-yauheni.kaliuta@redhat.com
Signed-off-by: Greg Kroah-Hartman

selftests/bpf: No need to drop the packet when there is no geneve opt

2021-03-17T16:11:21+00:00

commit 557c223b643a35effec9654958d8edc62fd2603a upstream.

In bpf geneve tunnel test we set geneve option on tx side. On rx side we
only call bpf_skb_get_tunnel_opt(). Since commit 9c2e14b48119 ("ip_tunnels:
Set tunnel option flag when tunnel metadata is present") geneve_rx() will
not add TUNNEL_GENEVE_OPT flag if there is no geneve option, which cause
bpf_skb_get_tunnel_opt() return ENOENT and _geneve_get_tunnel() in
test_tunnel_kern.c drop the packet.

As it should be valid that bpf_skb_get_tunnel_opt() return error when
there is not tunnel option, there is no need to drop the packet and
break all geneve rx traffic. Just set opt_class to 0 in this test and
keep returning TC_ACT_OK.

Fixes: 933a741e3b82 ("selftests/bpf: bpf tunnel test.")
Signed-off-by: Hangbin Liu 
Signed-off-by: Daniel Borkmann 
Acked-by: William Tu 
Link: https://lore.kernel.org/bpf/20210224081403.1425474-1-liuhangbin@gmail.com
Signed-off-by: Greg Kroah-Hartman

selftests/bpf: Use the last page in test_snprintf_btf on s390

2021-03-17T16:11:21+00:00

commit 42a382a466a967dc053c73b969cd2ac2fec502cf upstream.

test_snprintf_btf fails on s390, because NULL points to a readable
struct lowcore there. Fix by using the last page instead.

Error message example:

    printing fffffffffffff000 should generate error, got (361)

Fixes: 076a95f5aff2 ("selftests/bpf: Add bpf_snprintf_btf helper tests")
Signed-off-by: Ilya Leoshkevich 
Signed-off-by: Daniel Borkmann 
Acked-by: Heiko Carstens 
Acked-by: Yonghong Song 
Link: https://lore.kernel.org/bpf/20210227051726.121256-1-iii@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman

selftests/bpf: Remove memory leak

2021-03-07T11:35:50+00:00

[ Upstream commit 4896d7e37ea5217d42e210bfcf4d56964044704f ]

The allocated entry is immediately overwritten by an assignment. Fix
that.

Signed-off-by: Björn Töpel 
Signed-off-by: Daniel Borkmann 
Link: https://lore.kernel.org/bpf/20210122154725.22140-5-bjorn.topel@gmail.com
Signed-off-by: Sasha Levin

wireguard: selftests: test multiple parallel streams

2021-03-04T11:15:44+00:00

commit d5a49aa6c3e264a93a7d08485d66e346be0969dd upstream.

In order to test ndo_start_xmit being called in parallel, explicitly add
separate tests, which should all run on different cores. This should
help tease out bugs associated with queueing up packets from different
cores in parallel. Currently, it hasn't found those types of bugs, but
given future planned work, this is a useful regression to avoid.

Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld 
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

kcmp: Support selection of SYS_kcmp without CHECKPOINT_RESTORE

2021-03-04T11:15:38+00:00

commit bfe3911a91047557eb0e620f95a370aee6a248c7 upstream.

Userspace has discovered the functionality offered by SYS_kcmp and has
started to depend upon it. In particular, Mesa uses SYS_kcmp for
os_same_file_description() in order to identify when two fd (e.g. device
or dmabuf) point to the same struct file. Since they depend on it for
core functionality, lift SYS_kcmp out of the non-default
CONFIG_CHECKPOINT_RESTORE into the selectable syscall category.

Rasmus Villemoes also pointed out that systemd uses SYS_kcmp to
deduplicate the per-service file descriptor store.

Note that some distributions such as Ubuntu are already enabling
CHECKPOINT_RESTORE in their configs and so, by extension, SYS_kcmp.

References: https://gitlab.freedesktop.org/drm/intel/-/issues/3046
Signed-off-by: Chris Wilson 
Cc: Kees Cook 
Cc: Andy Lutomirski 
Cc: Will Drewry 
Cc: Andrew Morton 
Cc: Dave Airlie 
Cc: Daniel Vetter 
Cc: Lucas Stach 
Cc: Rasmus Villemoes 
Cc: Cyrill Gorcunov 
Cc: stable@vger.kernel.org
Acked-by: Daniel Vetter  # DRM depends on kcmp
Acked-by: Rasmus Villemoes  # systemd uses kcmp
Reviewed-by: Cyrill Gorcunov 
Reviewed-by: Kees Cook 
Acked-by: Thomas Zimmermann 
Signed-off-by: Daniel Vetter 
Link: https://patchwork.freedesktop.org/patch/msgid/20210205220012.1983-1-chris@chris-wilson.co.uk
Signed-off-by: Greg Kroah-Hartman

selftests/ftrace: Update synthetic event syntax errors

2021-03-04T11:14:58+00:00

[ Upstream commit b5734e997e1117afb479ffda500e36fa91aea3e8 ]

Some of the synthetic event errors and positions have changed in the
code - update those and add several more tests.

Also add a runtime check to ensure that the kernel supports dynamic
strings in synthetic events, which these tests require.

Link: https://lkml.kernel.org/r/51402656433455baead34f068c6e9466b64df9c0.1612208610.git.zanussi@kernel.org

Fixes: 81ff92a93d95 (selftests/ftrace: Add test case for synthetic event syntax errors)
Reported-by: Masami Hiramatsu 
Signed-off-by: Tom Zanussi 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Sasha Levin

kselftests: dmabuf-heaps: Fix Makefile's inclusion of the kernel's usr/include dir

2021-03-04T11:14:54+00:00

[ Upstream commit 64ba3d591c9d2be2a9c09e99b00732afe002ad0d ]

Copied in from somewhere else, the makefile was including
the kerne's usr/include dir, which caused the asm/ioctl.h file
to be used.

Unfortunately, that file has different values for _IOC_SIZEBITS
and _IOC_WRITE than include/uapi/asm-generic/ioctl.h which then
causes the _IOCW macros to give the wrong ioctl numbers,
specifically for DMA_BUF_IOCTL_SYNC.

This patch simply removes the extra include from the Makefile

Cc: Shuah Khan 
Cc: Brian Starkey 
Cc: Sumit Semwal 
Cc: Laura Abbott 
Cc: Hridya Valsaraju 
Cc: Suren Baghdasaryan 
Cc: Sandeep Patil 
Cc: Daniel Mentz 
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kselftest@vger.kernel.org
Fixes: a8779927fd86c ("kselftests: Add dma-heap test")
Signed-off-by: John Stultz 
Signed-off-by: Shuah Khan 
Signed-off-by: Sasha Levin