linux.git/tools/testing, branch v6.1.1 Clone of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git Merge tag 'mm-hotfixes-stable-2022-12-10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm 2022-12-11T01:10:52+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-12-11T01:10:52+00:00 4cee37b3a4e68c42b867c87a6218e11bc571ba66 Pull misc fixes from Andrew Morton: "Nine hotfixes. Six for MM, three for other areas. Four of these patches address post-6.0 issues" * tag 'mm-hotfixes-stable-2022-12-10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: memcg: fix possible use-after-free in memcg_write_event_control() MAINTAINERS: update Muchun Song's email mm/gup: fix gup_pud_range() for dax mmap: fix do_brk_flags() modifying obviously incorrect VMAs mm/swap: fix SWP_PFN_BITS with CONFIG_PHYS_ADDR_T_64BIT on 32bit tmpfs: fix data loss from failed fallocate kselftests: cgroup: update kmem test precision tolerance mm: do not BUG_ON missing brk mapping, because userspace can unmap it mailmap: update Matti Vaittinen's email address 
Pull misc fixes from Andrew Morton:
 "Nine hotfixes.

  Six for MM, three for other areas. Four of these patches address
  post-6.0 issues"

* tag 'mm-hotfixes-stable-2022-12-10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  memcg: fix possible use-after-free in memcg_write_event_control()
  MAINTAINERS: update Muchun Song's email
  mm/gup: fix gup_pud_range() for dax
  mmap: fix do_brk_flags() modifying obviously incorrect VMAs
  mm/swap: fix SWP_PFN_BITS with CONFIG_PHYS_ADDR_T_64BIT on 32bit
  tmpfs: fix data loss from failed fallocate
  kselftests: cgroup: update kmem test precision tolerance
  mm: do not BUG_ON missing brk mapping, because userspace can unmap it
  mailmap: update Matti Vaittinen's email address
kselftests: cgroup: update kmem test precision tolerance 2022-12-10T02:41:16+00:00 Michal Hocko mhocko@suse.com 2022-12-02T08:50:26+00:00 de16d6e4a9fb13d07c88d0e57754348662f53b23 1813e51eece0 ("memcg: increase MEMCG_CHARGE_BATCH to 64") has changed the batch size while this test case has been left behind. This has led to a test failure reported by test bot: not ok 2 selftests: cgroup: test_kmem # exit=1 Update the tolerance for the pcp charges to reflect the MEMCG_CHARGE_BATCH change to fix this. [akpm@linux-foundation.org: update comments, per Roman] Link: https://lkml.kernel.org/r/Y4m8Unt6FhWKC6IH@dhcp22.suse.cz Fixes: 1813e51eece0a ("memcg: increase MEMCG_CHARGE_BATCH to 64") Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: kernel test robot <yujie.liu@intel.com> Link: https://lore.kernel.org/oe-lkp/202212010958.c1053bd3-yujie.liu@intel.com Acked-by: Shakeel Butt <shakeelb@google.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Tested-by: Yujie Liu <yujie.liu@intel.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Michal Koutný" <mkoutny@suse.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 
1813e51eece0 ("memcg: increase MEMCG_CHARGE_BATCH to 64") has changed
the batch size while this test case has been left behind. This has led
to a test failure reported by test bot:
not ok 2 selftests: cgroup: test_kmem # exit=1

Update the tolerance for the pcp charges to reflect the
MEMCG_CHARGE_BATCH change to fix this.

[akpm@linux-foundation.org: update comments, per Roman]
Link: https://lkml.kernel.org/r/Y4m8Unt6FhWKC6IH@dhcp22.suse.cz
Fixes: 1813e51eece0a ("memcg: increase MEMCG_CHARGE_BATCH to 64")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: kernel test robot <yujie.liu@intel.com>
  Link: https://lore.kernel.org/oe-lkp/202212010958.c1053bd3-yujie.liu@intel.com
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Tested-by: Yujie Liu <yujie.liu@intel.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Michal Koutný" <mkoutny@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ipv4: Fix incorrect route flushing when table ID 0 is used 2022-12-07T04:34:43+00:00 Ido Schimmel idosch@nvidia.com 2022-12-04T07:50:45+00:00 c0d999348e01df03e0a7f550351f3907fabbf611 Cited commit added the table ID to the FIB info structure, but did not properly initialize it when table ID 0 is used. This can lead to a route in the default VRF with a preferred source address not being flushed when the address is deleted. Consider the following example: # ip address add dev dummy1 192.0.2.1/28 # ip address add dev dummy1 192.0.2.17/28 # ip route add 198.51.100.0/24 via 192.0.2.2 src 192.0.2.17 metric 100 # ip route add table 0 198.51.100.0/24 via 192.0.2.2 src 192.0.2.17 metric 200 # ip route show 198.51.100.0/24 198.51.100.0/24 via 192.0.2.2 dev dummy1 src 192.0.2.17 metric 100 198.51.100.0/24 via 192.0.2.2 dev dummy1 src 192.0.2.17 metric 200 Both routes are installed in the default VRF, but they are using two different FIB info structures. One with a metric of 100 and table ID of 254 (main) and one with a metric of 200 and table ID of 0. Therefore, when the preferred source address is deleted from the default VRF, the second route is not flushed: # ip address del dev dummy1 192.0.2.17/28 # ip route show 198.51.100.0/24 198.51.100.0/24 via 192.0.2.2 dev dummy1 src 192.0.2.17 metric 200 Fix by storing a table ID of 254 instead of 0 in the route configuration structure. Add a test case that fails before the fix: # ./fib_tests.sh -t ipv4_del_addr IPv4 delete address route tests Regular FIB info TEST: Route removed from VRF when source address deleted [ OK ] TEST: Route in default VRF not removed [ OK ] TEST: Route removed in default VRF when source address deleted [ OK ] TEST: Route in VRF is not removed by address delete [ OK ] Identical FIB info with different table ID TEST: Route removed from VRF when source address deleted [ OK ] TEST: Route in default VRF not removed [ OK ] TEST: Route removed in default VRF when source address deleted [ OK ] TEST: Route in VRF is not removed by address delete [ OK ] Table ID 0 TEST: Route removed in default VRF when source address deleted [FAIL] Tests passed: 8 Tests failed: 1 And passes after: # ./fib_tests.sh -t ipv4_del_addr IPv4 delete address route tests Regular FIB info TEST: Route removed from VRF when source address deleted [ OK ] TEST: Route in default VRF not removed [ OK ] TEST: Route removed in default VRF when source address deleted [ OK ] TEST: Route in VRF is not removed by address delete [ OK ] Identical FIB info with different table ID TEST: Route removed from VRF when source address deleted [ OK ] TEST: Route in default VRF not removed [ OK ] TEST: Route removed in default VRF when source address deleted [ OK ] TEST: Route in VRF is not removed by address delete [ OK ] Table ID 0 TEST: Route removed in default VRF when source address deleted [ OK ] Tests passed: 9 Tests failed: 0 Fixes: 5a56a0b3a45d ("net: Don't delete routes in different VRFs") Reported-by: Donald Sharp <sharpd@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Cited commit added the table ID to the FIB info structure, but did not
properly initialize it when table ID 0 is used. This can lead to a route
in the default VRF with a preferred source address not being flushed
when the address is deleted.

Consider the following example:

 # ip address add dev dummy1 192.0.2.1/28
 # ip address add dev dummy1 192.0.2.17/28
 # ip route add 198.51.100.0/24 via 192.0.2.2 src 192.0.2.17 metric 100
 # ip route add table 0 198.51.100.0/24 via 192.0.2.2 src 192.0.2.17 metric 200
 # ip route show 198.51.100.0/24
 198.51.100.0/24 via 192.0.2.2 dev dummy1 src 192.0.2.17 metric 100
 198.51.100.0/24 via 192.0.2.2 dev dummy1 src 192.0.2.17 metric 200

Both routes are installed in the default VRF, but they are using two
different FIB info structures. One with a metric of 100 and table ID of
254 (main) and one with a metric of 200 and table ID of 0. Therefore,
when the preferred source address is deleted from the default VRF,
the second route is not flushed:

 # ip address del dev dummy1 192.0.2.17/28
 # ip route show 198.51.100.0/24
 198.51.100.0/24 via 192.0.2.2 dev dummy1 src 192.0.2.17 metric 200

Fix by storing a table ID of 254 instead of 0 in the route configuration
structure.

Add a test case that fails before the fix:

 # ./fib_tests.sh -t ipv4_del_addr

 IPv4 delete address route tests
     Regular FIB info
     TEST: Route removed from VRF when source address deleted            [ OK ]
     TEST: Route in default VRF not removed                              [ OK ]
     TEST: Route removed in default VRF when source address deleted      [ OK ]
     TEST: Route in VRF is not removed by address delete                 [ OK ]
     Identical FIB info with different table ID
     TEST: Route removed from VRF when source address deleted            [ OK ]
     TEST: Route in default VRF not removed                              [ OK ]
     TEST: Route removed in default VRF when source address deleted      [ OK ]
     TEST: Route in VRF is not removed by address delete                 [ OK ]
     Table ID 0
     TEST: Route removed in default VRF when source address deleted      [FAIL]

 Tests passed:   8
 Tests failed:   1

And passes after:

 # ./fib_tests.sh -t ipv4_del_addr

 IPv4 delete address route tests
     Regular FIB info
     TEST: Route removed from VRF when source address deleted            [ OK ]
     TEST: Route in default VRF not removed                              [ OK ]
     TEST: Route removed in default VRF when source address deleted      [ OK ]
     TEST: Route in VRF is not removed by address delete                 [ OK ]
     Identical FIB info with different table ID
     TEST: Route removed from VRF when source address deleted            [ OK ]
     TEST: Route in default VRF not removed                              [ OK ]
     TEST: Route removed in default VRF when source address deleted      [ OK ]
     TEST: Route in VRF is not removed by address delete                 [ OK ]
     Table ID 0
     TEST: Route removed in default VRF when source address deleted      [ OK ]

 Tests passed:   9
 Tests failed:   0

Fixes: 5a56a0b3a45d ("net: Don't delete routes in different VRFs")
Reported-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipv4: Fix incorrect route flushing when source address is deleted 2022-12-07T04:34:43+00:00 Ido Schimmel idosch@nvidia.com 2022-12-04T07:50:44+00:00 f96a3d74554df537b6db5c99c27c80e7afadc8d1 Cited commit added the table ID to the FIB info structure, but did not prevent structures with different table IDs from being consolidated. This can lead to routes being flushed from a VRF when an address is deleted from a different VRF. Fix by taking the table ID into account when looking for a matching FIB info. This is already done for FIB info structures backed by a nexthop object in fib_find_info_nh(). Add test cases that fail before the fix: # ./fib_tests.sh -t ipv4_del_addr IPv4 delete address route tests Regular FIB info TEST: Route removed from VRF when source address deleted [ OK ] TEST: Route in default VRF not removed [ OK ] TEST: Route removed in default VRF when source address deleted [ OK ] TEST: Route in VRF is not removed by address delete [ OK ] Identical FIB info with different table ID TEST: Route removed from VRF when source address deleted [FAIL] TEST: Route in default VRF not removed [ OK ] RTNETLINK answers: File exists TEST: Route removed in default VRF when source address deleted [ OK ] TEST: Route in VRF is not removed by address delete [FAIL] Tests passed: 6 Tests failed: 2 And pass after: # ./fib_tests.sh -t ipv4_del_addr IPv4 delete address route tests Regular FIB info TEST: Route removed from VRF when source address deleted [ OK ] TEST: Route in default VRF not removed [ OK ] TEST: Route removed in default VRF when source address deleted [ OK ] TEST: Route in VRF is not removed by address delete [ OK ] Identical FIB info with different table ID TEST: Route removed from VRF when source address deleted [ OK ] TEST: Route in default VRF not removed [ OK ] TEST: Route removed in default VRF when source address deleted [ OK ] TEST: Route in VRF is not removed by address delete [ OK ] Tests passed: 8 Tests failed: 0 Fixes: 5a56a0b3a45d ("net: Don't delete routes in different VRFs") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Cited commit added the table ID to the FIB info structure, but did not
prevent structures with different table IDs from being consolidated.
This can lead to routes being flushed from a VRF when an address is
deleted from a different VRF.

Fix by taking the table ID into account when looking for a matching FIB
info. This is already done for FIB info structures backed by a nexthop
object in fib_find_info_nh().

Add test cases that fail before the fix:

 # ./fib_tests.sh -t ipv4_del_addr

 IPv4 delete address route tests
     Regular FIB info
     TEST: Route removed from VRF when source address deleted            [ OK ]
     TEST: Route in default VRF not removed                              [ OK ]
     TEST: Route removed in default VRF when source address deleted      [ OK ]
     TEST: Route in VRF is not removed by address delete                 [ OK ]
     Identical FIB info with different table ID
     TEST: Route removed from VRF when source address deleted            [FAIL]
     TEST: Route in default VRF not removed                              [ OK ]
 RTNETLINK answers: File exists
     TEST: Route removed in default VRF when source address deleted      [ OK ]
     TEST: Route in VRF is not removed by address delete                 [FAIL]

 Tests passed:   6
 Tests failed:   2

And pass after:

 # ./fib_tests.sh -t ipv4_del_addr

 IPv4 delete address route tests
     Regular FIB info
     TEST: Route removed from VRF when source address deleted            [ OK ]
     TEST: Route in default VRF not removed                              [ OK ]
     TEST: Route removed in default VRF when source address deleted      [ OK ]
     TEST: Route in VRF is not removed by address delete                 [ OK ]
     Identical FIB info with different table ID
     TEST: Route removed from VRF when source address deleted            [ OK ]
     TEST: Route in default VRF not removed                              [ OK ]
     TEST: Route removed in default VRF when source address deleted      [ OK ]
     TEST: Route in VRF is not removed by address delete                 [ OK ]

 Tests passed:   8
 Tests failed:   0

Fixes: 5a56a0b3a45d ("net: Don't delete routes in different VRFs")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
selftests: net: Use "grep -E" instead of "egrep" 2022-12-03T04:56:41+00:00 Tiezhu Yang yangtiezhu@loongson.cn 2022-12-01T03:10:48+00:00 6a30d3e3491dc562384e9f15b201a8a25b57439f The latest version of grep claims the egrep is now obsolete so the build now contains warnings that look like: egrep: warning: egrep is obsolescent; using grep -E fix this using "grep -E" instead. sed -i "s/egrep/grep -E/g" `grep egrep -rwl tools/testing/selftests/net` Here are the steps to install the latest grep: wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz tar xf grep-3.8.tar.gz cd grep-3.8 && ./configure && make sudo make install export PATH=/usr/local/bin:$PATH Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Link: https://lore.kernel.org/r/1669864248-829-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
The latest version of grep claims the egrep is now obsolete so the build
now contains warnings that look like:
	egrep: warning: egrep is obsolescent; using grep -E
fix this using "grep -E" instead.

  sed -i "s/egrep/grep -E/g" `grep egrep -rwl tools/testing/selftests/net`

Here are the steps to install the latest grep:

  wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz
  tar xf grep-3.8.tar.gz
  cd grep-3.8 && ./configure && make
  sudo make install
  export PATH=/usr/local/bin:$PATH

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/1669864248-829-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
selftests: rtnetlink: correct xfrm policy rule in kci_test_ipsec_offload 2022-12-03T04:49:30+00:00 Zhengchao Shao shaozhengchao@huawei.com 2022-12-01T08:22:46+00:00 85a0506c073332a3057f5a9635fa0d4db5a8e03b When testing in kci_test_ipsec_offload, srcip is configured as $dstip, it should add xfrm policy rule in instead of out. The test result of this patch is as follows: PASS: ipsec_offload Fixes: 2766a11161cc ("selftests: rtnetlink: add ipsec offload API test") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Acked-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20221201082246.14131-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
When testing in kci_test_ipsec_offload, srcip is configured as $dstip,
it should add xfrm policy rule in instead of out.
The test result of this patch is as follows:
PASS: ipsec_offload

Fixes: 2766a11161cc ("selftests: rtnetlink: add ipsec offload API test")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Acked-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20221201082246.14131-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
selftests/tls: Fix tls selftests dependency to correct algorithm 2022-12-03T04:48:47+00:00 Tianjia Zhang tianjia.zhang@linux.alibaba.com 2022-12-01T13:18:52+00:00 6648eadba8d6b37c8e6cb1b906f68509b3b39385 Commit d2825fa9365d ("crypto: sm3,sm4 - move into crypto directory") moves SM3 and SM4 algorithm implementations from stand-alone library to crypto API. The corresponding configuration options for the API version (generic) are CONFIG_CRYPTO_SM3_GENERIC and CONFIG_CRYPTO_SM4_GENERIC, respectively. Replace option selected in selftests configuration from the library version to the API version. Fixes: d2825fa9365d ("crypto: sm3,sm4 - move into crypto directory") Reported-by: Hangbin Liu <liuhangbin@gmail.com> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: stable@vger.kernel.org # v5.19+ Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Link: https://lore.kernel.org/r/20221201131852.38501-1-tianjia.zhang@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Commit d2825fa9365d ("crypto: sm3,sm4 - move into crypto directory") moves
SM3 and SM4 algorithm implementations from stand-alone library to crypto
API. The corresponding configuration options for the API version (generic)
are CONFIG_CRYPTO_SM3_GENERIC and CONFIG_CRYPTO_SM4_GENERIC, respectively.

Replace option selected in selftests configuration from the library version
to the API version.

Fixes: d2825fa9365d ("crypto: sm3,sm4 - move into crypto directory")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20221201131852.38501-1-tianjia.zhang@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
af_unix: Add test for sock_diag and UDIAG_SHOW_UID. 2022-12-01T09:32:20+00:00 Kuniyuki Iwashima kuniyu@amazon.com 2022-11-27T01:24:12+00:00 ac011361bd4f6206b36d2a242500239881bf8d2a The test prog dumps a single AF_UNIX socket's UID with and without unshare(CLONE_NEWUSER) and checks if it matches the result of getuid(). Without the preceding patch, the test prog is killed by a NULL deref in sk_diag_dump_uid(). # ./diag_uid TAP version 13 1..2 # Starting 2 tests from 3 test cases. # RUN diag_uid.uid.1 ... BUG: kernel NULL pointer dereference, address: 0000000000000270 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 105212067 P4D 105212067 PUD 1051fe067 PMD 0 Oops: 0000 [#1] PREEMPT SMP NOPTI Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.amzn2022.0.1 04/01/2014 RIP: 0010:sk_diag_fill (./include/net/sock.h:920 net/unix/diag.c:119 net/unix/diag.c:170) ... # 1: Test terminated unexpectedly by signal 9 # FAIL diag_uid.uid.1 not ok 1 diag_uid.uid.1 # RUN diag_uid.uid_unshare.1 ... # 1: Test terminated by timeout # FAIL diag_uid.uid_unshare.1 not ok 2 diag_uid.uid_unshare.1 # FAILED: 0 / 2 tests passed. # Totals: pass:0 fail:2 xfail:0 xpass:0 skip:0 error:0 With the patch, the test succeeds. # ./diag_uid TAP version 13 1..2 # Starting 2 tests from 3 test cases. # RUN diag_uid.uid.1 ... # OK diag_uid.uid.1 ok 1 diag_uid.uid.1 # RUN diag_uid.uid_unshare.1 ... # OK diag_uid.uid_unshare.1 ok 2 diag_uid.uid_unshare.1 # PASSED: 2 / 2 tests passed. # Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> 
The test prog dumps a single AF_UNIX socket's UID with and without
unshare(CLONE_NEWUSER) and checks if it matches the result of getuid().

Without the preceding patch, the test prog is killed by a NULL deref
in sk_diag_dump_uid().

  # ./diag_uid
  TAP version 13
  1..2
  # Starting 2 tests from 3 test cases.
  #  RUN           diag_uid.uid.1 ...
  BUG: kernel NULL pointer dereference, address: 0000000000000270
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 105212067 P4D 105212067 PUD 1051fe067 PMD 0
  Oops: 0000 [#1] PREEMPT SMP NOPTI
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.amzn2022.0.1 04/01/2014
  RIP: 0010:sk_diag_fill (./include/net/sock.h:920 net/unix/diag.c:119 net/unix/diag.c:170)
  ...
  # 1: Test terminated unexpectedly by signal 9
  #          FAIL  diag_uid.uid.1
  not ok 1 diag_uid.uid.1
  #  RUN           diag_uid.uid_unshare.1 ...
  # 1: Test terminated by timeout
  #          FAIL  diag_uid.uid_unshare.1
  not ok 2 diag_uid.uid_unshare.1
  # FAILED: 0 / 2 tests passed.
  # Totals: pass:0 fail:2 xfail:0 xpass:0 skip:0 error:0

With the patch, the test succeeds.

  # ./diag_uid
  TAP version 13
  1..2
  # Starting 2 tests from 3 test cases.
  #  RUN           diag_uid.uid.1 ...
  #            OK  diag_uid.uid.1
  ok 1 diag_uid.uid.1
  #  RUN           diag_uid.uid_unshare.1 ...
  #            OK  diag_uid.uid_unshare.1
  ok 2 diag_uid.uid_unshare.1
  # PASSED: 2 / 2 tests passed.
  # Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Merge tag 'net-6.1-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2022-11-29T17:52:10+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-11-29T17:52:10+00:00 01f856ae6d0ca5ad0505b79bf2d22d7ca439b2a1 Pull networking fixes from Jakub Kicinski: "Including fixes from bpf, can and wifi. Current release - new code bugs: - eth: mlx5e: - use kvfree() in mlx5e_accel_fs_tcp_create() - MACsec, fix RX data path 16 RX security channel limit - MACsec, fix memory leak when MACsec device is deleted - MACsec, fix update Rx secure channel active field - MACsec, fix add Rx security association (SA) rule memory leak Previous releases - regressions: - wifi: cfg80211: don't allow multi-BSSID in S1G - stmmac: set MAC's flow control register to reflect current settings - eth: mlx5: - E-switch, fix duplicate lag creation - fix use-after-free when reverting termination table Previous releases - always broken: - ipv4: fix route deletion when nexthop info is not specified - bpf: fix a local storage BPF map bug where the value's spin lock field can get initialized incorrectly - tipc: re-fetch skb cb after tipc_msg_validate - wifi: wilc1000: fix Information Element parsing - packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE - sctp: fix memory leak in sctp_stream_outq_migrate() - can: can327: fix potential skb leak when netdev is down - can: add number of missing netdev freeing on error paths - aquantia: do not purge addresses when setting the number of rings - wwan: iosm: - fix incorrect skb length leading to truncated packet - fix crash in peek throughput test due to skb UAF" * tag 'net-6.1-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits) net: ethernet: renesas: ravb: Fix promiscuous mode after system resumed MAINTAINERS: Update maintainer list for chelsio drivers ionic: update MAINTAINERS entry sctp: fix memory leak in sctp_stream_outq_migrate() packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE net/mlx5: Lag, Fix for loop when checking lag Revert "net/mlx5e: MACsec, remove replay window size limitation in offload path" net: marvell: prestera: Fix a NULL vs IS_ERR() check in some functions net: tun: Fix use-after-free in tun_detach() net: mdiobus: fix unbalanced node reference count net: hsr: Fix potential use-after-free tipc: re-fetch skb cb after tipc_msg_validate mptcp: fix sleep in atomic at close time mptcp: don't orphan ssk in mptcp_close() dsa: lan9303: Correct stat name ipv4: Fix route deletion when nexthop info is not specified net: wwan: iosm: fix incorrect skb length net: wwan: iosm: fix crash in peek throughput test net: wwan: iosm: fix dma_alloc_coherent incompatible pointer type net: wwan: iosm: fix kernel test robot reported error ... 
Pull networking fixes from Jakub Kicinski:
 "Including fixes from bpf, can and wifi.

  Current release - new code bugs:

   - eth: mlx5e:
      - use kvfree() in mlx5e_accel_fs_tcp_create()
      - MACsec, fix RX data path 16 RX security channel limit
      - MACsec, fix memory leak when MACsec device is deleted
      - MACsec, fix update Rx secure channel active field
      - MACsec, fix add Rx security association (SA) rule memory leak

  Previous releases - regressions:

   - wifi: cfg80211: don't allow multi-BSSID in S1G

   - stmmac: set MAC's flow control register to reflect current settings

   - eth: mlx5:
      - E-switch, fix duplicate lag creation
      - fix use-after-free when reverting termination table

  Previous releases - always broken:

   - ipv4: fix route deletion when nexthop info is not specified

   - bpf: fix a local storage BPF map bug where the value's spin lock
     field can get initialized incorrectly

   - tipc: re-fetch skb cb after tipc_msg_validate

   - wifi: wilc1000: fix Information Element parsing

   - packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE

   - sctp: fix memory leak in sctp_stream_outq_migrate()

   - can: can327: fix potential skb leak when netdev is down

   - can: add number of missing netdev freeing on error paths

   - aquantia: do not purge addresses when setting the number of rings

   - wwan: iosm:
      - fix incorrect skb length leading to truncated packet
      - fix crash in peek throughput test due to skb UAF"

* tag 'net-6.1-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits)
  net: ethernet: renesas: ravb: Fix promiscuous mode after system resumed
  MAINTAINERS: Update maintainer list for chelsio drivers
  ionic: update MAINTAINERS entry
  sctp: fix memory leak in sctp_stream_outq_migrate()
  packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE
  net/mlx5: Lag, Fix for loop when checking lag
  Revert "net/mlx5e: MACsec, remove replay window size limitation in offload path"
  net: marvell: prestera: Fix a NULL vs IS_ERR() check in some functions
  net: tun: Fix use-after-free in tun_detach()
  net: mdiobus: fix unbalanced node reference count
  net: hsr: Fix potential use-after-free
  tipc: re-fetch skb cb after tipc_msg_validate
  mptcp: fix sleep in atomic at close time
  mptcp: don't orphan ssk in mptcp_close()
  dsa: lan9303: Correct stat name
  ipv4: Fix route deletion when nexthop info is not specified
  net: wwan: iosm: fix incorrect skb length
  net: wwan: iosm: fix crash in peek throughput test
  net: wwan: iosm: fix dma_alloc_coherent incompatible pointer type
  net: wwan: iosm: fix kernel test robot reported error
  ...
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf 2022-11-29T01:06:52+00:00 Jakub Kicinski kuba@kernel.org 2022-11-29T01:06:51+00:00 4f4a5de1253915c824820107319cfde7990a432f Daniel Borkmann says: ==================== bpf 2022-11-25 We've added 10 non-merge commits during the last 8 day(s) which contain a total of 7 files changed, 48 insertions(+), 30 deletions(-). The main changes are: 1) Several libbpf ringbuf fixes related to probing for its availability, size overflows when mmaping a 2G ringbuf and rejection of invalid reservationsizes, from Hou Tao. 2) Fix a buggy return pointer in libbpf for attach_raw_tp function, from Jiri Olsa. 3) Fix a local storage BPF map bug where the value's spin lock field can get initialized incorrectly, from Xu Kuohai. 4) Two follow-up fixes in kprobe_multi BPF selftests for BPF CI, from Jiri Olsa. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests/bpf: Make test_bench_attach serial selftests/bpf: Filter out default_idle from kprobe_multi bench bpf: Set and check spin lock value in sk_storage_map_test bpf: Do not copy spin lock field from user in bpf_selem_alloc libbpf: Check the validity of size in user_ring_buffer__reserve() libbpf: Handle size overflow for user ringbuf mmap libbpf: Handle size overflow for ringbuf mmap libbpf: Use page size as max_entries when probing ring buffer map bpf, perf: Use subprog name when reporting subprog ksymbol libbpf: Use correct return pointer in attach_raw_tp ==================== Link: https://lore.kernel.org/r/20221125001034.29473-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
Daniel Borkmann says:

====================
bpf 2022-11-25

We've added 10 non-merge commits during the last 8 day(s) which contain
a total of 7 files changed, 48 insertions(+), 30 deletions(-).

The main changes are:

1) Several libbpf ringbuf fixes related to probing for its availability,
   size overflows when mmaping a 2G ringbuf and rejection of invalid
   reservationsizes, from Hou Tao.

2) Fix a buggy return pointer in libbpf for attach_raw_tp function,
   from Jiri Olsa.

3) Fix a local storage BPF map bug where the value's spin lock field
   can get initialized incorrectly, from Xu Kuohai.

4) Two follow-up fixes in kprobe_multi BPF selftests for BPF CI,
   from Jiri Olsa.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  selftests/bpf: Make test_bench_attach serial
  selftests/bpf: Filter out default_idle from kprobe_multi bench
  bpf: Set and check spin lock value in sk_storage_map_test
  bpf: Do not copy spin lock field from user in bpf_selem_alloc
  libbpf: Check the validity of size in user_ring_buffer__reserve()
  libbpf: Handle size overflow for user ringbuf mmap
  libbpf: Handle size overflow for ringbuf mmap
  libbpf: Use page size as max_entries when probing ring buffer map
  bpf, perf: Use subprog name when reporting subprog ksymbol
  libbpf: Use correct return pointer in attach_raw_tp
====================

Link: https://lore.kernel.org/r/20221125001034.29473-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>