linux.git/tools/testing, branch v6.1.48

selftests: mirror_gre_changes: Tighten up the TTL test match

2023-08-23T15:52:33+00:00

[ Upstream commit 855067defa36b1f9effad8c219d9a85b655cf500 ]

This test verifies whether the encapsulated packets have the correct
configured TTL. It does so by sending ICMP packets through the test
topology and mirroring them to a gretap netdevice. On a busy host
however, more than just the test ICMP packets may end up flowing
through the topology, get mirrored, and counted. This leads to
potential spurious failures as the test observes much more mirrored
packets than the sent test packets, and assumes a bug.

Fix this by tightening up the mirror action match. Change it from
matchall to a flower classifier matching on ICMP packets specifically.

Fixes: 45315673e0c5 ("selftests: forwarding: Test changes in mirror-to-gretap")
Signed-off-by: Petr Machata 
Tested-by: Mirsad Todorovac 
Reviewed-by: Ido Schimmel 
Reviewed-by: Simon Horman 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

selftests: forwarding: tc_actions: Use ncat instead of nc

2023-08-23T15:52:18+00:00

[ Upstream commit 5e8670610b93158ffacc3241f835454ff26a3469 ]

The test relies on 'nc' being the netcat version from the nmap project.
While this seems to be the case on Fedora, it is not the case on Ubuntu,
resulting in failures such as [1].

Fix by explicitly using the 'ncat' utility from the nmap project and the
skip the test in case it is not installed.

[1]
 # timeout set to 0
 # selftests: net/forwarding: tc_actions.sh
 # TEST: gact drop and ok (skip_hw)                                    [ OK ]
 # TEST: mirred egress flower redirect (skip_hw)                       [ OK ]
 # TEST: mirred egress flower mirror (skip_hw)                         [ OK ]
 # TEST: mirred egress matchall mirror (skip_hw)                       [ OK ]
 # TEST: mirred_egress_to_ingress (skip_hw)                            [ OK ]
 # nc: invalid option -- '-'
 # usage: nc [-46CDdFhklNnrStUuvZz] [-I length] [-i interval] [-M ttl]
 #         [-m minttl] [-O length] [-P proxy_username] [-p source_port]
 #         [-q seconds] [-s sourceaddr] [-T keyword] [-V rtable] [-W recvlimit]
 #         [-w timeout] [-X proxy_protocol] [-x proxy_address[:port]]
 #         [destination] [port]
 # nc: invalid option -- '-'
 # usage: nc [-46CDdFhklNnrStUuvZz] [-I length] [-i interval] [-M ttl]
 #         [-m minttl] [-O length] [-P proxy_username] [-p source_port]
 #         [-q seconds] [-s sourceaddr] [-T keyword] [-V rtable] [-W recvlimit]
 #         [-w timeout] [-X proxy_protocol] [-x proxy_address[:port]]
 #         [destination] [port]
 # TEST: mirred_egress_to_ingress_tcp (skip_hw)                        [FAIL]
 #       server output check failed
 # INFO: Could not test offloaded functionality
 not ok 80 selftests: net/forwarding: tc_actions.sh # exit=1

Fixes: ca22da2fbd69 ("act_mirred: use the backlog for nested calls to mirred ingress")
Reported-by: Mirsad Todorovac 
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel 
Reviewed-by: Petr Machata 
Tested-by: Mirsad Todorovac 
Reviewed-by: Hangbin Liu 
Acked-by: Nikolay Aleksandrov 
Link: https://lore.kernel.org/r/20230808141503.4060661-12-idosch@nvidia.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

selftests: forwarding: tc_actions: cleanup temporary files when test is aborted

2023-08-23T15:52:18+00:00

[ Upstream commit f58531716ced8975a4ade108ef4af35f98722af7 ]

remove temporary files created by 'mirred_egress_to_ingress_tcp' test
in the cleanup() handler. Also, change variable names to avoid clashing
with globals from lib.sh.

Suggested-by: Paolo Abeni 
Signed-off-by: Davide Caratti 
Link: https://lore.kernel.org/r/091649045a017fc00095ecbb75884e5681f7025f.1676368027.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski 
Stable-dep-of: 5e8670610b93 ("selftests: forwarding: tc_actions: Use ncat instead of nc")
Signed-off-by: Sasha Levin

nexthop: Fix infinite nexthop bucket dump when using maximum nexthop ID

2023-08-16T16:27:28+00:00

commit 8743aeff5bc4dcb5b87b43765f48d5ac3ad7dd9f upstream.

A netlink dump callback can return a positive number to signal that more
information needs to be dumped or zero to signal that the dump is
complete. In the second case, the core netlink code will append the
NLMSG_DONE message to the skb in order to indicate to user space that
the dump is complete.

The nexthop bucket dump callback always returns a positive number if
nexthop buckets were filled in the provided skb, even if the dump is
complete. This means that a dump will span at least two recvmsg() calls
as long as nexthop buckets are present. In the last recvmsg() call the
dump callback will not fill in any nexthop buckets because the previous
call indicated that the dump should restart from the last dumped nexthop
ID plus one.

 # ip link add name dummy1 up type dummy
 # ip nexthop add id 1 dev dummy1
 # ip nexthop add id 10 group 1 type resilient buckets 2
 # strace -e sendto,recvmsg -s 5 ip nexthop bucket
 sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOPBUCKET, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691396980, nlmsg_pid=0}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152
 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 128
 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 128
 id 10 index 0 idle_time 6.66 nhid 1
 id 10 index 1 idle_time 6.66 nhid 1
 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 20
 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, 0], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 20
 +++ exited with 0 +++

This behavior is both inefficient and buggy. If the last nexthop to be
dumped had the maximum ID of 0xffffffff, then the dump will restart from
0 (0xffffffff + 1) and never end:

 # ip link add name dummy1 up type dummy
 # ip nexthop add id 1 dev dummy1
 # ip nexthop add id $((2**32-1)) group 1 type resilient buckets 2
 # ip nexthop bucket
 id 4294967295 index 0 idle_time 5.55 nhid 1
 id 4294967295 index 1 idle_time 5.55 nhid 1
 id 4294967295 index 0 idle_time 5.55 nhid 1
 id 4294967295 index 1 idle_time 5.55 nhid 1
 [...]

Fix by adjusting the dump callback to return zero when the dump is
complete. After the fix only one recvmsg() call is made and the
NLMSG_DONE message is appended to the RTM_NEWNEXTHOPBUCKET responses:

 # ip link add name dummy1 up type dummy
 # ip nexthop add id 1 dev dummy1
 # ip nexthop add id $((2**32-1)) group 1 type resilient buckets 2
 # strace -e sendto,recvmsg -s 5 ip nexthop bucket
 sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOPBUCKET, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691396737, nlmsg_pid=0}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152
 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 148
 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, 0]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 148
 id 4294967295 index 0 idle_time 6.61 nhid 1
 id 4294967295 index 1 idle_time 6.61 nhid 1
 +++ exited with 0 +++

Note that if the NLMSG_DONE message cannot be appended because of size
limitations, then another recvmsg() will be needed, but the core netlink
code will not invoke the dump callback and simply reply with a
NLMSG_DONE message since it knows that the callback previously returned
zero.

Add a test that fails before the fix:

 # ./fib_nexthops.sh -t basic_res
 [...]
 TEST: Maximum nexthop ID dump                                       [FAIL]
 [...]

And passes after it:

 # ./fib_nexthops.sh -t basic_res
 [...]
 TEST: Maximum nexthop ID dump                                       [ OK ]
 [...]

Fixes: 8a1bbabb034d ("nexthop: Add netlink handlers for bucket dump")
Signed-off-by: Ido Schimmel 
Reviewed-by: Petr Machata 
Reviewed-by: David Ahern 
Link: https://lore.kernel.org/r/20230808075233.3337922-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

nexthop: Fix infinite nexthop dump when using maximum nexthop ID

2023-08-16T16:27:28+00:00

commit 913f60cacda73ccac8eead94983e5884c03e04cd upstream.

A netlink dump callback can return a positive number to signal that more
information needs to be dumped or zero to signal that the dump is
complete. In the second case, the core netlink code will append the
NLMSG_DONE message to the skb in order to indicate to user space that
the dump is complete.

The nexthop dump callback always returns a positive number if nexthops
were filled in the provided skb, even if the dump is complete. This
means that a dump will span at least two recvmsg() calls as long as
nexthops are present. In the last recvmsg() call the dump callback will
not fill in any nexthops because the previous call indicated that the
dump should restart from the last dumped nexthop ID plus one.

 # ip nexthop add id 1 blackhole
 # strace -e sendto,recvmsg -s 5 ip nexthop
 sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOP, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691394315, nlmsg_pid=0}, {nh_family=AF_UNSPEC, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152
 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 36
 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=36, nlmsg_type=RTM_NEWNEXTHOP, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394315, nlmsg_pid=343}, {nh_family=AF_INET, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}, [[{nla_len=8, nla_type=NHA_ID}, 1], {nla_len=4, nla_type=NHA_BLACKHOLE}]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 36
 id 1 blackhole
 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 20
 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394315, nlmsg_pid=343}, 0], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 20
 +++ exited with 0 +++

This behavior is both inefficient and buggy. If the last nexthop to be
dumped had the maximum ID of 0xffffffff, then the dump will restart from
0 (0xffffffff + 1) and never end:

 # ip nexthop add id $((2**32-1)) blackhole
 # ip nexthop
 id 4294967295 blackhole
 id 4294967295 blackhole
 [...]

Fix by adjusting the dump callback to return zero when the dump is
complete. After the fix only one recvmsg() call is made and the
NLMSG_DONE message is appended to the RTM_NEWNEXTHOP response:

 # ip nexthop add id $((2**32-1)) blackhole
 # strace -e sendto,recvmsg -s 5 ip nexthop
 sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOP, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691394080, nlmsg_pid=0}, {nh_family=AF_UNSPEC, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152
 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 56
 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=36, nlmsg_type=RTM_NEWNEXTHOP, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394080, nlmsg_pid=342}, {nh_family=AF_INET, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}, [[{nla_len=8, nla_type=NHA_ID}, 4294967295], {nla_len=4, nla_type=NHA_BLACKHOLE}]], [{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394080, nlmsg_pid=342}, 0]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 56
 id 4294967295 blackhole
 +++ exited with 0 +++

Note that if the NLMSG_DONE message cannot be appended because of size
limitations, then another recvmsg() will be needed, but the core netlink
code will not invoke the dump callback and simply reply with a
NLMSG_DONE message since it knows that the callback previously returned
zero.

Add a test that fails before the fix:

 # ./fib_nexthops.sh -t basic
 [...]
 TEST: Maximum nexthop ID dump                                       [FAIL]
 [...]

And passes after it:

 # ./fib_nexthops.sh -t basic
 [...]
 TEST: Maximum nexthop ID dump                                       [ OK ]
 [...]

Fixes: ab84be7e54fc ("net: Initial nexthop code")
Reported-by: Petr Machata 
Closes: https://lore.kernel.org/netdev/87sf91enuf.fsf@nvidia.com/
Signed-off-by: Ido Schimmel 
Reviewed-by: Petr Machata 
Reviewed-by: David Ahern 
Link: https://lore.kernel.org/r/20230808075233.3337922-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

selftests: forwarding: tc_flower: Relax success criterion

2023-08-16T16:27:26+00:00

commit 9ee37e53e7687654b487fc94e82569377272a7a8 upstream.

The test checks that filters that match on source or destination MAC
were only hit once. A host can send more than one packet with a given
source or destination MAC, resulting in failures.

Fix by relaxing the success criterion and instead check that the filters
were not hit zero times. Using tc_check_at_least_x_packets() is also an
option, but it is not available in older kernels.

Fixes: 07e5c75184a1 ("selftests: forwarding: Introduce tc flower matching tests")
Reported-by: Mirsad Todorovac 
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel 
Reviewed-by: Petr Machata 
Tested-by: Mirsad Todorovac 
Reviewed-by: Hangbin Liu 
Acked-by: Nikolay Aleksandrov 
Link: https://lore.kernel.org/r/20230808141503.4060661-13-idosch@nvidia.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

selftests: forwarding: Switch off timeout

2023-08-16T16:27:26+00:00

commit 0529883ad102f6c04e19fb7018f31e1bda575bbe upstream.

The default timeout for selftests is 45 seconds, but it is not enough
for forwarding selftests which can takes minutes to finish depending on
the number of tests cases:

 # make -C tools/testing/selftests TARGETS=net/forwarding run_tests
 TAP version 13
 1..102
 # timeout set to 45
 # selftests: net/forwarding: bridge_igmp.sh
 # TEST: IGMPv2 report 239.10.10.10                                    [ OK ]
 # TEST: IGMPv2 leave 239.10.10.10                                     [ OK ]
 # TEST: IGMPv3 report 239.10.10.10 is_include                         [ OK ]
 # TEST: IGMPv3 report 239.10.10.10 include -> allow                   [ OK ]
 #
 not ok 1 selftests: net/forwarding: bridge_igmp.sh # TIMEOUT 45 seconds

Fix by switching off the timeout and setting it to 0. A similar change
was done for BPF selftests in commit 6fc5916cc256 ("selftests: bpf:
Switch off timeout").

Fixes: 81573b18f26d ("selftests/net/forwarding: add Makefile to install tests")
Reported-by: Mirsad Todorovac 
Closes: https://lore.kernel.org/netdev/8d149f8c-818e-d141-a0ce-a6bae606bc22@alu.unizg.hr/
Signed-off-by: Ido Schimmel 
Reviewed-by: Petr Machata 
Tested-by: Mirsad Todorovac 
Reviewed-by: Hangbin Liu 
Acked-by: Nikolay Aleksandrov 
Link: https://lore.kernel.org/r/20230808141503.4060661-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

selftests: forwarding: Skip test when no interfaces are specified

2023-08-16T16:27:26+00:00

commit d72c83b1e4b4a36a38269c77a85ff52f95eb0d08 upstream.

As explained in [1], the forwarding selftests are meant to be run with
either physical loopbacks or veth pairs. The interfaces are expected to
be specified in a user-provided forwarding.config file or as command
line arguments. By default, this file is not present and the tests fail:

 # make -C tools/testing/selftests TARGETS=net/forwarding run_tests
 [...]
 TAP version 13
 1..102
 # timeout set to 45
 # selftests: net/forwarding: bridge_igmp.sh
 # Command line is not complete. Try option "help"
 # Failed to create netif
 not ok 1 selftests: net/forwarding: bridge_igmp.sh # exit=1
 [...]

Fix by skipping a test if interfaces are not provided either via the
configuration file or command line arguments.

 # make -C tools/testing/selftests TARGETS=net/forwarding run_tests
 [...]
 TAP version 13
 1..102
 # timeout set to 45
 # selftests: net/forwarding: bridge_igmp.sh
 # SKIP: Cannot create interface. Name not specified
 ok 1 selftests: net/forwarding: bridge_igmp.sh # SKIP

[1] tools/testing/selftests/net/forwarding/README

Fixes: 81573b18f26d ("selftests/net/forwarding: add Makefile to install tests")
Reported-by: Mirsad Todorovac 
Closes: https://lore.kernel.org/netdev/856d454e-f83c-20cf-e166-6dc06cbc1543@alu.unizg.hr/
Signed-off-by: Ido Schimmel 
Reviewed-by: Petr Machata 
Tested-by: Mirsad Todorovac 
Reviewed-by: Hangbin Liu 
Acked-by: Nikolay Aleksandrov 
Link: https://lore.kernel.org/r/20230808141503.4060661-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

selftests: forwarding: hw_stats_l3_gre: Skip when using veth pairs

2023-08-16T16:27:26+00:00

commit 9a711cde07c245a163d95eee5b42ed1871e73236 upstream.

Layer 3 hardware stats cannot be used when the underlying interfaces are
veth pairs, resulting in failures:

 # ./hw_stats_l3_gre.sh
 TEST: ping gre flat                                                 [ OK ]
 TEST: Test rx packets:                                              [FAIL]
         Traffic not reflected in the counter: 0 -> 0
 TEST: Test tx packets:                                              [FAIL]
         Traffic not reflected in the counter: 0 -> 0

Fix by skipping the test when used with veth pairs.

Fixes: 813f97a26860 ("selftests: forwarding: Add a tunnel-based test for L3 HW stats")
Reported-by: Mirsad Todorovac 
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel 
Reviewed-by: Petr Machata 
Tested-by: Mirsad Todorovac 
Reviewed-by: Hangbin Liu 
Acked-by: Nikolay Aleksandrov 
Link: https://lore.kernel.org/r/20230808141503.4060661-10-idosch@nvidia.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

selftests: forwarding: ethtool_extended_state: Skip when using veth pairs

2023-08-16T16:27:26+00:00

commit b3d9305e60d121dac20a77b6847c4cf14a4c0001 upstream.

Ethtool extended state cannot be tested with veth pairs, resulting in
failures:

 # ./ethtool_extended_state.sh
 TEST: Autoneg, No partner detected                                  [FAIL]
         Expected "Autoneg", got "Link detected: no"
 [...]

Fix by skipping the test when used with veth pairs.

Fixes: 7d10bcce98cd ("selftests: forwarding: Add tests for ethtool extended state")
Reported-by: Mirsad Todorovac 
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel 
Reviewed-by: Petr Machata 
Tested-by: Mirsad Todorovac 
Reviewed-by: Hangbin Liu 
Acked-by: Nikolay Aleksandrov 
Link: https://lore.kernel.org/r/20230808141503.4060661-9-idosch@nvidia.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman