linux.git/tools, branch v4.14.286

perf c2c: Fix sorting in percent_rmt_hitm_cmp()

2022-06-14T14:53:57+00:00

[ Upstream commit b24192a17337abbf3f44aaa75e15df14a2d0016e ]

The function percent_rmt_hitm_cmp() wrongly uses local HITMs for
sorting remote HITMs.

Since this function is to sort cache lines for remote HITMs, this patch
changes to use 'rmt_hitm' field for correct sorting.

Fixes: 9cb3500afc0980c5 ("perf c2c report: Add hitm/store percent related sort keys")
Signed-off-by: Leo Yan 
Acked-by: Namhyung Kim 
Cc: Alexander Shishkin 
Cc: Ingo Molnar 
Cc: Jiri Olsa 
Cc: Joe Mario 
Cc: Mark Rutland 
Cc: Peter Zijlstra 
Link: https://lore.kernel.org/r/20220530084253.750190-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Sasha Levin

perf jevents: Fix event syntax error caused by ExtSel

2022-06-14T14:53:52+00:00

[ Upstream commit f4df0dbbe62ee8e4405a57b27ccd54393971c773 ]

In the origin code, when "ExtSel" is 1, the eventcode will change to
"eventcode |= 1 << 21”. For event “UNC_Q_RxL_CREDITS_CONSUMED_VN0.DRS",
its "ExtSel" is "1", its eventcode will change from 0x1E to 0x20001E,
but in fact the eventcode should <=0x1FF, so this will cause the parse
fail:

  # perf stat -e "UNC_Q_RxL_CREDITS_CONSUMED_VN0.DRS" -a sleep 0.1
  event syntax error: '.._RxL_CREDITS_CONSUMED_VN0.DRS'
                                    \___ value too big for format, maximum is 511

On the perf kernel side, the kernel assumes the valid bits are continuous.
It will adjust the 0x100 (bit 8 for perf tool) to bit 21 in HW.

DEFINE_UNCORE_FORMAT_ATTR(event_ext, event, "config:0-7,21");

So the perf tool follows the kernel side and just set bit8 other than bit21.

Fixes: fedb2b518239cbc0 ("perf jevents: Add support for parsing uncore json files")
Reviewed-by: Kan Liang 
Signed-off-by: Xing Zhengjun 
Acked-by: Ian Rogers 
Cc: Adrian Hunter 
Cc: Alexander Shishkin 
Cc: Andi Kleen 
Cc: Ingo Molnar 
Cc: Jiri Olsa 
Cc: Peter Zijlstra 
Link: https://lore.kernel.org/r/20220525140410.1706851-1-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Sasha Levin

perf c2c: Use stdio interface if slang is not supported

2022-06-14T14:53:52+00:00

[ Upstream commit c4040212bc97d16040712a410335f93bc94d2262 ]

If the slang lib is not installed on the system, perf c2c tool disables TUI
mode and roll back to use stdio mode;  but the flag 'c2c.use_stdio' is
missed to set true and thus it wrongly applies UI quirks in the function
ui_quirks().

This commit forces to use stdio interface if slang is not supported, and
it can avoid to apply the UI quirks and show the correct metric header.

Before:

=================================================
      Shared Cache Line Distribution Pareto
=================================================
  -------------------------------------------------------------------------------
      0        0        0       99        0        0        0      0xaaaac17d6000
  -------------------------------------------------------------------------------
    0.00%    0.00%    6.06%    0.00%    0.00%    0.00%   0x20   N/A       0      0xaaaac17c25ac         0         0        43       375    18469         2  [.] 0x00000000000025ac  memstress         memstress[25ac]   0
    0.00%    0.00%   93.94%    0.00%    0.00%    0.00%   0x29   N/A       0      0xaaaac17c3e88         0         0       173       180      135         2  [.] 0x0000000000003e88  memstress         memstress[3e88]   0

After:

=================================================
      Shared Cache Line Distribution Pareto
=================================================
  -------------------------------------------------------------------------------
      0        0        0       99        0        0        0      0xaaaac17d6000
  -------------------------------------------------------------------------------
           0.00%    0.00%    6.06%    0.00%    0.00%    0.00%                0x20   N/A       0      0xaaaac17c25ac         0         0        43       375    18469         2  [.] 0x00000000000025ac  memstress         memstress[25ac]   0
           0.00%    0.00%   93.94%    0.00%    0.00%    0.00%                0x29   N/A       0      0xaaaac17c3e88         0         0       173       180      135         2  [.] 0x0000000000003e88  memstress         memstress[3e88]   0

Fixes: 5a1a99cd2e4e1557 ("perf c2c report: Add main TUI browser")
Reported-by: Joe Mario 
Signed-off-by: Leo Yan 
Cc: Alexander Shishkin 
Cc: Jiri Olsa 
Cc: Mark Rutland 
Cc: Namhyung Kim 
Cc: Peter Zijlstra 
Link: http://lore.kernel.org/lkml/20220526145400.611249-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Sasha Levin

perf bench numa: Address compiler error on s390

2022-05-25T06:41:21+00:00

[ Upstream commit f8ac1c478424a9a14669b8cef7389b1e14e5229d ]

The compilation on s390 results in this error:

  # make DEBUG=y bench/numa.o
  ...
  bench/numa.c: In function ‘__bench_numa’:
  bench/numa.c:1749:81: error: ‘%d’ directive output may be truncated
              writing between 1 and 11 bytes into a region of size between
              10 and 20 [-Werror=format-truncation=]
  1749 |        snprintf(tname, sizeof(tname), "process%d:thread%d", p, t);
                                                               ^~
  ...
  bench/numa.c:1749:64: note: directive argument in the range
                 [-2147483647, 2147483646]
  ...
  #

The maximum length of the %d replacement is 11 characters because of the
negative sign.  Therefore extend the array by two more characters.

Output after:

  # make  DEBUG=y bench/numa.o > /dev/null 2>&1; ll bench/numa.o
  -rw-r--r-- 1 root root 418320 May 19 09:11 bench/numa.o
  #

Fixes: 3aff8ba0a4c9c919 ("perf bench numa: Avoid possible truncation when using snprintf()")
Suggested-by: Namhyung Kim 
Signed-off-by: Thomas Richter 
Cc: Heiko Carstens 
Cc: Sumanth Korikkar 
Cc: Sven Schnelle 
Cc: Vasily Gorbik 
Link: https://lore.kernel.org/r/20220520081158.2990006-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Sasha Levin

tools build: Use $(shell ) instead of `` to get embedded libperl's ccopts

2022-04-20T07:08:30+00:00

commit 541f695cbcb6932c22638b06e0cbe1d56177e2e9 upstream.

Just like its done for ldopts and for both in tools/perf/Makefile.config.

Using `` to initialize PERL_EMBED_CCOPTS somehow precludes using:

  $(filter-out SOMETHING_TO_FILTER,$(PERL_EMBED_CCOPTS))

And we need to do it to allow for building with versions of clang where
some gcc options selected by distros are not available.

Tested-by: Sedat Dilek  # Debian/Selfmade LLVM-14 (x86-64)
Cc: Adrian Hunter 
Cc: Fangrui Song 
Cc: Florian Fainelli 
Cc: Ian Rogers 
Cc: Jiri Olsa 
Cc: John Keeping 
Cc: Leo Yan 
Cc: Michael Petlan 
Cc: Namhyung Kim 
Cc: Nathan Chancellor 
Cc: Nick Desaulniers 
Link: http://lore.kernel.org/lkml/YktYX2OnLtyobRYD@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Greg Kroah-Hartman

selftests/x86: Add validity check and allow field splitting

2022-04-20T07:08:12+00:00

[ Upstream commit b06e15ebd5bfb670f93c7f11a29b8299c1178bc6 ]

Add check to test if CC has a string. CC can have multiple sub-strings
like "ccache gcc". Erorr pops up if it is treated as single string and
double quotes are used around it. This can be fixed by removing the
quotes and not treating CC as a single string.

Fixes: e9886ace222e ("selftests, x86: Rework x86 target architecture detection")
Reported-by: "kernelci.org bot" 
Signed-off-by: Muhammad Usama Anjum 
Signed-off-by: Dave Hansen 
Link: https://lkml.kernel.org/r/20220214184109.3739179-2-usama.anjum@collabora.com
Signed-off-by: Sasha Levin

perf symbols: Fix symbol size calculation condition

2022-03-23T08:01:35+00:00

commit 3cf6a32f3f2a45944dd5be5c6ac4deb46bcd3bee upstream.

Before this patch, the symbol end address fixup to be called, needed two
conditions being met:

  if (prev->end == prev->start && prev->end != curr->start)

Where
  "prev->end == prev->start" means that prev is zero-long
                             (and thus needs a fixup)
and
  "prev->end != curr->start" means that fixup hasn't been applied yet

However, this logic is incorrect in the following situation:

*curr  = {rb_node = {__rb_parent_color = 278218928,
  rb_right = 0x0, rb_left = 0x0},
  start = 0xc000000000062354,
  end = 0xc000000000062354, namelen = 40, type = 2 '\002',
  binding = 0 '\000', idle = 0 '\000', ignore = 0 '\000',
  inlined = 0 '\000', arch_sym = 0 '\000', annotate2 = false,
  name = 0x1159739e "kprobe_optinsn_page\t[__builtin__kprobes]"}

*prev = {rb_node = {__rb_parent_color = 278219041,
  rb_right = 0x109548b0, rb_left = 0x109547c0},
  start = 0xc000000000062354,
  end = 0xc000000000062354, namelen = 12, type = 2 '\002',
  binding = 1 '\001', idle = 0 '\000', ignore = 0 '\000',
  inlined = 0 '\000', arch_sym = 0 '\000', annotate2 = false,
  name = 0x1095486e "optinsn_slot"}

In this case, prev->start == prev->end == curr->start == curr->end,
thus the condition above thinks that "we need a fixup due to zero
length of prev symbol, but it has been probably done, since the
prev->end == curr->start", which is wrong.

After the patch, the execution path proceeds to arch__symbols__fixup_end
function which fixes up the size of prev symbol by adding page_size to
its end offset.

Fixes: 3b01a413c196c910 ("perf symbols: Improve kallsyms symbol end addr calculation")
Signed-off-by: Michael Petlan 
Cc: Athira Jajeev 
Cc: Jiri Olsa 
Cc: Kajol Jain 
Cc: Madhavan Srinivasan 
Link: http://lore.kernel.org/lkml/20220317135536.805-1-mpetlan@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Greg Kroah-Hartman

kselftest/vm: fix tests build with old libc

2022-03-23T08:01:35+00:00

[ Upstream commit b773827e361952b3f53ac6fa4c4e39ccd632102e ]

The error message when I build vm tests on debian10 (GLIBC 2.28):

    userfaultfd.c: In function `userfaultfd_pagemap_test':
    userfaultfd.c:1393:37: error: `MADV_PAGEOUT' undeclared (first use
    in this function); did you mean `MADV_RANDOM'?
      if (madvise(area_dst, test_pgsize, MADV_PAGEOUT))
                                         ^~~~~~~~~~~~
                                         MADV_RANDOM

This patch includes these newer definitions from UAPI linux/mman.h, is
useful to fix tests build on systems without these definitions in glibc
sys/mman.h.

Link: https://lkml.kernel.org/r/20220227055330.43087-2-zhouchengming@bytedance.com
Signed-off-by: Chengming Zhou 
Reviewed-by: Shuah Khan 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Sasha Levin

selftests/memfd: clean up mapping in mfd_fail_write

2022-03-16T11:57:08+00:00

[ Upstream commit fda153c89af344d21df281009a9d046cf587ea0f ]

Running the memfd script ./run_hugetlbfs_test.sh will often end in error
as follows:

    memfd-hugetlb: CREATE
    memfd-hugetlb: BASIC
    memfd-hugetlb: SEAL-WRITE
    memfd-hugetlb: SEAL-FUTURE-WRITE
    memfd-hugetlb: SEAL-SHRINK
    fallocate(ALLOC) failed: No space left on device
    ./run_hugetlbfs_test.sh: line 60: 166855 Aborted                 (core dumped) ./memfd_test hugetlbfs
    opening: ./mnt/memfd
    fuse: DONE

If no hugetlb pages have been preallocated, run_hugetlbfs_test.sh will
allocate 'just enough' pages to run the test.  In the SEAL-FUTURE-WRITE
test the mfd_fail_write routine maps the file, but does not unmap.  As a
result, two hugetlb pages remain reserved for the mapping.  When the
fallocate call in the SEAL-SHRINK test attempts allocate all hugetlb
pages, it is short by the two reserved pages.

Fix by making sure to unmap in mfd_fail_write.

Link: https://lkml.kernel.org/r/20220219004340.56478-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz 
Cc: Joel Fernandes 
Cc: Shuah Khan 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Sasha Levin

x86/speculation: Rename RETPOLINE_AMD to RETPOLINE_LFENCE

2022-03-11T09:13:28+00:00

commit d45476d9832409371537013ebdd8dc1a7781f97a upstream.

The RETPOLINE_AMD name is unfortunate since it isn't necessarily
AMD only, in fact Hygon also uses it. Furthermore it will likely be
sufficient for some Intel processors. Therefore rename the thing to
RETPOLINE_LFENCE to better describe what it is.

Add the spectre_v2=retpoline,lfence option as an alias to
spectre_v2=retpoline,amd to preserve existing setups. However, the output
of /sys/devices/system/cpu/vulnerabilities/spectre_v2 will be changed.

  [ bp: Fix typos, massage. ]

Co-developed-by: Josh Poimboeuf 
Signed-off-by: Josh Poimboeuf 
Signed-off-by: Peter Zijlstra (Intel) 
Signed-off-by: Borislav Petkov 
Reviewed-by: Thomas Gleixner 
[fllinden@amazon.com: backported to 4.14]
Signed-off-by: Frank van der Linden 
Signed-off-by: Greg Kroah-Hartman