linux.git/tools, branch v4.4.187

perf test mmap-thread-lookup: Initialize variable to suppress memory sanitizer warning

2019-08-04T07:34:58+00:00

[ Upstream commit 4e4cf62b37da5ff45c904a3acf242ab29ed5881d ]

Running the 'perf test' command after building perf with a memory
sanitizer causes a warning that says:

  WARNING: MemorySanitizer: use-of-uninitialized-value... in mmap-thread-lookup.c

Initializing the go variable to 0 silences this harmless warning.

Committer warning:

This was harmless, just a simple test writing whatever was at that
sizeof(int) memory area just to signal another thread blocked reading
that file created with pipe(). Initialize it tho so that we don't get
this warning.

Signed-off-by: Numfor Mbiziwo-Tiapo 
Cc: Alexander Shishkin 
Cc: Ian Rogers 
Cc: Jiri Olsa 
Cc: Mark Drayton 
Cc: Namhyung Kim 
Cc: Peter Zijlstra 
Cc: Song Liu 
Cc: Stephane Eranian 
Link: http://lkml.kernel.org/r/20190702173716.181223-1-nums@google.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Sasha Levin

iio: iio-utils: Fix possible incorrect mask calculation

2019-08-04T07:34:57+00:00

[ Upstream commit 208a68c8393d6041a90862992222f3d7943d44d6 ]

On some machines, iio-sensor-proxy was returning all 0's for IIO sensor
values. It turns out that the bits_used for this sensor is 32, which makes
the mask calculation:

*mask = (1 << 32) - 1;

If the compiler interprets the 1 literals as 32-bit ints, it generates
undefined behavior depending on compiler version and optimization level.
On my system, it optimizes out the shift, so the mask value becomes

*mask = (1) - 1;

With a mask value of 0, iio-sensor-proxy will always return 0 for every axis.

Avoid incorrect 0 values caused by compiler optimization.

See original fix by Brett Dutro  in
iio-sensor-proxy:
https://github.com/hadess/iio-sensor-proxy/commit/9615ceac7c134d838660e209726cd86aa2064fd3

Signed-off-by: Bastien Nocera 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Sasha Levin

perf evsel: Make perf_evsel__name() accept a NULL argument

2019-08-04T07:34:46+00:00

[ Upstream commit fdbdd7e8580eac9bdafa532746c865644d125e34 ]

In which case it simply returns "unknown", like when it can't figure out
the evsel->name value.

This makes this code more robust and fixes a problem in 'perf trace'
where a NULL evsel was being passed to a routine that only used the
evsel for printing its name when a invalid syscall id was passed.

Reported-by: Leo Yan 
Cc: Adrian Hunter 
Cc: Jiri Olsa 
Cc: Namhyung Kim 
Link: https://lkml.kernel.org/n/tip-f30ztaasku3z935cn3ak3h53@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Sasha Levin

perf test 6: Fix missing kvm module load for s390

2019-08-04T07:34:45+00:00

[ Upstream commit 53fe307dfd309e425b171f6272d64296a54f4dff ]

Command

   # perf test -Fv 6

fails with error

   running test 100 'kvm-s390:kvm_s390_create_vm' failed to parse
    event 'kvm-s390:kvm_s390_create_vm', err -1, str 'unknown tracepoint'
    event syntax error: 'kvm-s390:kvm_s390_create_vm'
                         \___ unknown tracepoint

when the kvm module is not loaded or not built in.

Fix this by adding a valid function which tests if the module
is loaded. Loaded modules (or builtin KVM support) have a
directory named
  /sys/kernel/debug/tracing/events/kvm-s390
for this tracepoint.

Check for existence of this directory.

Signed-off-by: Thomas Richter 
Reviewed-by: Christian Borntraeger 
Cc: Heiko Carstens 
Cc: Hendrik Brueckner 
Link: http://lkml.kernel.org/r/20190604053504.43073-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Sasha Levin

cpupower : frequency-set -r option misses the last cpu in related cpu list

2019-08-04T07:34:45+00:00

[ Upstream commit 04507c0a9385cc8280f794a36bfff567c8cc1042 ]

To set frequency on specific cpus using cpupower, following syntax can
be used :
cpupower -c #i frequency-set -f #f -r

While setting frequency using cpupower frequency-set command, if we use
'-r' option, it is expected to set frequency for all cpus related to
cpu #i. But it is observed to be missing the last cpu in related cpu
list. This patch fixes the problem.

Signed-off-by: Abhishek Goel 
Reviewed-by: Thomas Renninger 
Signed-off-by: Shuah Khan 
Signed-off-by: Sasha Levin

perf help: Remove needless use of strncpy()

2019-07-10T07:56:34+00:00

commit b6313899f4ed2e76b8375cf8069556f5b94fbff0 upstream.

Since we make sure the destination buffer has at least strlen(orig) + 1,
no need to do a strncpy(dest, orig, strlen(orig)), just use strcpy(dest,
orig).

This silences this gcc 8.2 warning on Alpine Linux:

  In function 'add_man_viewer',
      inlined from 'perf_help_config' at builtin-help.c:284:3:
  builtin-help.c:192:2: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
    strncpy((*p)->name, name, len);
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  builtin-help.c: In function 'perf_help_config':
  builtin-help.c:187:15: note: length computed here
    size_t len = strlen(name);
                 ^~~~~~~~~~~~

Cc: Adrian Hunter 
Cc: Jiri Olsa 
Cc: Namhyung Kim 
Fixes: 078006012401 ("perf_counter tools: add in basic glue from Git")
Link: https://lkml.kernel.org/n/tip-2f69l7drca427ob4km8i7kvo@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Greg Kroah-Hartman

perf ui helpline: Use strlcpy() as a shorter form of strncpy() + explicit set nul

2019-07-10T07:56:34+00:00

commit 4d0f16d059ddb91424480d88473f7392f24aebdc upstream.

The strncpy() function may leave the destination string buffer
unterminated, better use strlcpy() that we have a __weak fallback
implementation for systems without it.

In this case we are actually setting the null byte at the right place,
but since we pass the buffer size as the limit to strncpy() and not
it minus one, gcc ends up warning us about that, see below. So, lets
just switch to the shorter form provided by strlcpy().

This fixes this warning on an Alpine Linux Edge system with gcc 8.2:

  ui/tui/helpline.c: In function 'tui_helpline__push':
  ui/tui/helpline.c:27:2: error: 'strncpy' specified bound 512 equals destination size [-Werror=stringop-truncation]
    strncpy(ui_helpline__current, msg, sz)[sz - 1] = '\0';
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  cc1: all warnings being treated as errors

Cc: Adrian Hunter 
Cc: Jiri Olsa 
Cc: Namhyung Kim 
Fixes: e6e904687949 ("perf ui: Introduce struct ui_helpline")
Link: https://lkml.kernel.org/n/tip-d1wz0hjjsh19xbalw69qpytj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Greg Kroah-Hartman

tools include: Adopt linux/bits.h

2019-06-11T10:23:53+00:00

commit ba4aa02b417f08a0bee5e7b8ed70cac788a7c854 upstream.

So that we reduce the difference of tools/include/linux/bitops.h to the
original kernel file, include/linux/bitops.h, trying to remove the need
to define BITS_PER_LONG, to avoid clashes with asm/bitsperlong.h.

And the things removed from tools/include/linux/bitops.h are really in
linux/bits.h, so that we can have a copy and then
tools/perf/check_headers.sh will tell us when new stuff gets added to
linux/bits.h so that we can check if it is useful and if any adjustment
needs to be done to the tools/{include,arch}/ copies.

Cc: Adrian Hunter 
Cc: Alexander Sverdlin 
Cc: David Ahern 
Cc: Jiri Olsa 
Cc: Namhyung Kim 
Cc: Wang Nan 
Link: https://lkml.kernel.org/n/tip-y1sqyydvfzo0bjjoj4zsl562@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo 
[bwh: Backported to 4.4 as dependency of "x86/msr-index: Cleanup bit defines":
 - Drop change in check-headers.sh
 - Adjust context]
Signed-off-by: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman

perf tools: No need to include bitops.h in util.h

2019-06-11T10:23:53+00:00

commit 6dcca6df4b73d409628c7b4464c63d4eb9d4d13a upstream.

When we switched to the kernel's roundup_pow_of_two we forgot to remove
this include from util.h, do it now.

Cc: Adrian Hunter 
Cc: David Ahern 
Cc: Jiri Olsa 
Cc: Namhyung Kim 
Cc: Wang Nan 
Fixes: 91529834d1de ("perf evlist: Use roundup_pow_of_two")
Link: http://lkml.kernel.org/n/tip-kfye5rxivib6155cltx0bw4h@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo 
[bwh: Backported to 4.4 as dependency of "tools include: Adopt linux/bits.h":
 - Include  in util/string.c to avoid build regression
 - Adjust context]
Signed-off-by: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman

perf bench numa: Add define for RUSAGE_THREAD if not present

2019-06-11T10:23:50+00:00

[ Upstream commit bf561d3c13423fc54daa19b5d49dc15fafdb7acc ]

While cross building perf to the ARC architecture on a fedora 30 host,
we were failing with:

      CC       /tmp/build/perf/bench/numa.o
  bench/numa.c: In function ‘worker_thread’:
  bench/numa.c:1261:12: error: ‘RUSAGE_THREAD’ undeclared (first use in this function); did you mean ‘SIGEV_THREAD’?
    getrusage(RUSAGE_THREAD, &rusage);
              ^~~~~~~~~~~~~
              SIGEV_THREAD
  bench/numa.c:1261:12: note: each undeclared identifier is reported only once for each function it appears in

[perfbuilder@60d5802468f6 perf]$ /arc_gnu_2019.03-rc1_prebuilt_uclibc_le_archs_linux_install/bin/arc-linux-gcc --version | head -1
arc-linux-gcc (ARCv2 ISA Linux uClibc toolchain 2019.03-rc1) 8.3.1 20190225
[perfbuilder@60d5802468f6 perf]$

Trying to reproduce a report by Vineet, I noticed that, with just
cross-built zlib and numactl libraries, I ended up with the above
failure.

So, since RUSAGE_THREAD is available as a define, check for that and
numactl libraries, I ended up with the above failure.

So, since RUSAGE_THREAD is available as a define in the system headers,
check if it is defined in the 'perf bench numa' sources and define it if
not.

Now it builds and I have to figure out if the problem reported by Vineet
only takes place if we have libelf or some other library available.

Cc: Arnd Bergmann 
Cc: Jiri Olsa 
Cc: linux-snps-arc@lists.infradead.org
Cc: Namhyung Kim 
Cc: Vineet Gupta 
Link: https://lkml.kernel.org/n/tip-2wb4r1gir9xrevbpq7qp0amk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Sasha Levin