Merge tag 'mfd-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add support for  Renesas RZ/G2L MTU3

  New Device Support:
   - Add support for Lenovo Yoga Book X90F to Intel CHT WC
   - Add support for MAX5970 and MAX5978 to Simple MFD (I2C)
   - Add support for Meteor Lake PCH-S LPSS PCI to Intel LPSS PCI
   - Add support for AXP15060 PMIC to X-Powers PMIC collection

  Remove Device Support:
   - Remove support for Samsung 5M8751 and S5M8763 PMIC devices

  New Functionality:
   - Convert deprecated QCOM IRQ Chip to config registers
   - Add support for 32-bit address spaces to Renesas SMUs

  Fix-ups:
   - Make use of APIs / MACROs designed to simplify and demystify
   - Add / improve Device Tree bindings
   - Memory saving struct layout optimisations
   - Remove old / deprecated functionality
   - Factor out unassigned register addresses from ranges
   - Trivial: Spelling fixes, renames and coding style fixes
   - Rid 'defined but not used' warnings
   - Remove ineffective casts and pointer stubs

  Bug Fixes:
   - Fix incorrectly non-inverted mask/unmask IRQs on QCOM platforms
   - Remove MODULE_*() helpers from non-tristate drivers
   - Do not attempt to use out-of-range memory addresses associated with io_base
   - Provide missing export helpers
   - Fix remap bulk read optimisation fallout
   - Fix memory leak issues in error paths"

* tag 'mfd-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (88 commits)
  dt-bindings: mfd: ti,j721e-system-controller: Add SoC chip ID
  leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver
  dt-bindings: mfd: qcom,spmi-pmic: Document flash LED controller
  dt-bindings: mfd: x-powers,axp152: Document the AXP15060 variant
  mfd: axp20x: Add support for AXP15060 PMIC
  dt-bindings: mfd: x-powers,axp152: Document the AXP313a variant
  counter: rz-mtu3-cnt: Unlock on error in rz_mtu3_count_ceiling_write()
  dt-bindings: mfd: dlg,da9063: Document voltage monitoring
  dt-bindings: mfd: stm32: Remove unnecessary blank lines
  dt-bindings: mfd: qcom,spmi-pmic: Use generic ADC node name in examples
  dt-bindings: mfd: syscon: Add nuvoton,ma35d1-sys compatible
  MAINTAINERS: Add entries for Renesas RZ/G2L MTU3a counter driver
  counter: Add Renesas RZ/G2L MTU3a counter driver
  Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select
  mfd: Add Renesas RZ/G2L MTU3a core driver
  dt-bindings: timer: Document RZ/G2L MTU3a bindings
  mfd: rsmu_i2c: Convert to i2c's .probe_new() again
  mfd: intel-lpss: Add Intel Meteor Lake PCH-S LPSS PCI IDs
  mfd: dln2: Fix memory leak in dln2_probe()
  mfd: axp20x: Fix axp288 writable-ranges
  ...

91 files changed, 3519 insertions, 845 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-counter b/Documentation/ABI/testing/sysfs-bus-counter
index ff83320b4255..1417c4272c6c 100644
--- a/Documentation/ABI/testing/sysfs-bus-counter
+++ b/Documentation/ABI/testing/sysfs-bus-counter
@@ -1,3 +1,33 @@
+What:		/sys/bus/counter/devices/counterX/cascade_counts_enable
+KernelVersion:	6.4
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Indicates the cascading of Counts on Counter X.
+
+		Valid attribute values are boolean.
+
+What:		/sys/bus/counter/devices/counterX/external_input_phase_clock_select
+KernelVersion:	6.4
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Selects the external clock pin for phase counting mode of
+		Counter X.
+
+		MTCLKA-MTCLKB:
+			MTCLKA and MTCLKB pins are selected for the external
+			phase clock.
+
+		MTCLKC-MTCLKD:
+			MTCLKC and MTCLKD pins are selected for the external
+			phase clock.
+
+What:		/sys/bus/counter/devices/counterX/external_input_phase_clock_select_available
+KernelVersion:  6.4
+Contact:        linux-iio@vger.kernel.org
+Description:
+                Discrete set of available values for the respective device
+                configuration are listed in this file.
+
 What:		/sys/bus/counter/devices/counterX/countY/count
 KernelVersion:	5.2
 Contact:	linux-iio@vger.kernel.org
@@ -215,6 +245,8 @@ Contact:	linux-iio@vger.kernel.org
 Description:
 		This attribute indicates the number of overflows of count Y.
 
+What:		/sys/bus/counter/devices/counterX/cascade_counts_enable_component_id
+What:		/sys/bus/counter/devices/counterX/external_input_phase_clock_select_component_id
 What:		/sys/bus/counter/devices/counterX/countY/capture_component_id
 What:		/sys/bus/counter/devices/counterX/countY/ceiling_component_id
 What:		/sys/bus/counter/devices/counterX/countY/floor_component_id
diff --git a/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml b/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml
index e2046f07a40e..8459d3642205 100644
--- a/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml
@@ -36,7 +36,7 @@ properties:
   clock-controller:
     # Child node
     type: object
-    $ref: "../clock/canaan,k210-clk.yaml"
+    $ref: ../clock/canaan,k210-clk.yaml
     description:
       Clock controller for the SoC clocks. This child node definition
       should follow the bindings specified in
@@ -45,7 +45,7 @@ properties:
   reset-controller:
     # Child node
     type: object
-    $ref: "../reset/canaan,k210-rst.yaml"
+    $ref: ../reset/canaan,k210-rst.yaml
     description:
       Reset controller for the SoC. This child node definition
       should follow the bindings specified in
@@ -54,7 +54,7 @@ properties:
   syscon-reboot:
     # Child node
     type: object
-    $ref: "../power/reset/syscon-reboot.yaml"
+    $ref: ../power/reset/syscon-reboot.yaml
     description:
       Reboot method for the SoC. This child node definition
       should follow the bindings specified in
diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
index 8caa48f4570e..e1ca4f297c6d 100644
--- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
+++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
@@ -65,7 +65,7 @@ properties:
       ARM Cortex M4 Co-processor. Contains the name of the rpmsg
       device. Used to match the subnode to the rpmsg device announced by
       the SCP.
-    $ref: "/schemas/types.yaml#/definitions/string"
+    $ref: /schemas/types.yaml#/definitions/string
 
   spi-max-frequency: true
 
@@ -94,23 +94,23 @@ properties:
     const: 0
 
   typec:
-    $ref: "/schemas/chrome/google,cros-ec-typec.yaml#"
+    $ref: /schemas/chrome/google,cros-ec-typec.yaml#
 
   ec-pwm:
-    $ref: "/schemas/pwm/google,cros-ec-pwm.yaml#"
+    $ref: /schemas/pwm/google,cros-ec-pwm.yaml#
     deprecated: true
 
   pwm:
-    $ref: "/schemas/pwm/google,cros-ec-pwm.yaml#"
+    $ref: /schemas/pwm/google,cros-ec-pwm.yaml#
 
   kbd-led-backlight:
-    $ref: "/schemas/chrome/google,cros-kbd-led-backlight.yaml#"
+    $ref: /schemas/chrome/google,cros-kbd-led-backlight.yaml#
 
   keyboard-controller:
-    $ref: "/schemas/input/google,cros-ec-keyb.yaml#"
+    $ref: /schemas/input/google,cros-ec-keyb.yaml#
 
   proximity:
-    $ref: "/schemas/iio/proximity/google,cros-ec-mkbp-proximity.yaml#"
+    $ref: /schemas/iio/proximity/google,cros-ec-mkbp-proximity.yaml#
 
   codecs:
     type: object
@@ -126,7 +126,7 @@ properties:
     patternProperties:
       "^ec-codec@[a-f0-9]+$":
         type: object
-        $ref: "/schemas/sound/google,cros-ec-codec.yaml#"
+        $ref: /schemas/sound/google,cros-ec-codec.yaml#
 
     required:
       - "#address-cells"
@@ -151,15 +151,15 @@ properties:
 patternProperties:
   "^i2c-tunnel[0-9]*$":
     type: object
-    $ref: "/schemas/i2c/google,cros-ec-i2c-tunnel.yaml#"
+    $ref: /schemas/i2c/google,cros-ec-i2c-tunnel.yaml#
 
   "^regulator@[0-9]+$":
     type: object
-    $ref: "/schemas/regulator/google,cros-ec-regulator.yaml#"
+    $ref: /schemas/regulator/google,cros-ec-regulator.yaml#
 
   "^extcon[0-9]*$":
     type: object
-    $ref: "/schemas/extcon/extcon-usbc-cros-ec.yaml#"
+    $ref: /schemas/extcon/extcon-usbc-cros-ec.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
index 22edcb4b212f..bdff5b653453 100644
--- a/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
@@ -53,7 +53,7 @@ properties:
       '^ldo[0-9]+$':
         type: object
 
-        $ref: "/schemas/regulator/regulator.yaml#"
+        $ref: /schemas/regulator/regulator.yaml#
 
         unevaluatedProperties: false
 
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max5970.yaml b/Documentation/devicetree/bindings/mfd/maxim,max5970.yaml
new file mode 100644
index 000000000000..da67742c5aa9
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/maxim,max5970.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max5970.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Regulator for MAX5970 Smart Switch from Maxim Integrated
+
+maintainers:
+  - Patrick Rudolph <patrick.rudolph@9elements.com>
+
+description: |
+  The smart switch provides no output regulation, but independent fault protection
+  and voltage and current sensing.
+  Programming is done through I2C bus.
+
+  Datasheets:
+    https://datasheets.maximintegrated.com/en/ds/MAX5970.pdf
+    https://datasheets.maximintegrated.com/en/ds/MAX5978.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,max5970
+      - maxim,max5978
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  leds:
+    type: object
+    description:
+      Properties for four LEDS.
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^led@[0-3]$":
+        $ref: /schemas/leds/common.yaml#
+        type: object
+
+    additionalProperties: false
+
+  vss1-supply:
+    description: Supply of the first channel.
+
+  vss2-supply:
+    description: Supply of the second channel.
+
+  regulators:
+    type: object
+    description:
+      Properties for both hot swap control/switch.
+
+    patternProperties:
+      "^sw[0-1]$":
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+        properties:
+          shunt-resistor-micro-ohms:
+            description: |
+              The value of current sense resistor in microohms.
+
+        required:
+          - shunt-resistor-micro-ohms
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+  - vss1-supply
+
+allOf:
+  - if: