Merge tag 'input-for-v6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

 - a brand new driver for touchpads and touchbars in newer Apple devices

 - support for Berlin-A series in goodix-berlin touchscreen driver

 - improvements to matrix_keypad driver to better handle GPIOs toggling

 - assorted small cleanups in other input drivers

* tag 'input-for-v6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: goodix_berlin - add support for Berlin-A series
  dt-bindings: input: goodix,gt9916: Document gt9897 compatible
  dt-bindings: input: matrix_keypad - add wakeup-source property
  dt-bindings: input: matrix_keypad - add missing property
  Input: pm8941-pwrkey - fix dev_dbg() output in pm8941_pwrkey_irq()
  Input: synaptics - hide unused smbus_pnp_ids[] array
  Input: apple_z2 - fix potential confusion in Kconfig
  Input: matrix_keypad - use fsleep for delays after activating columns
  Input: matrix_keypad - add settle time after enabling all columns
  dt-bindings: input: matrix_keypad: add settle time after enabling all columns
  dt-bindings: input: matrix_keypad: convert to YAML
  dt-bindings: input: Correct indentation and style in DTS example
  MAINTAINERS: Add entries for Apple Z2 touchscreen driver
  Input: apple_z2 - add a driver for Apple Z2 touchscreens
  dt-bindings: input: touchscreen: Add Z2 controller
  Input: Switch to use hrtimer_setup()
  Input: drop vb2_ops_wait_prepare/finish

24 files changed, 814 insertions, 150 deletions

diff --git a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
deleted file mode 100644
index 570dc10f0cd7..000000000000
--- a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* GPIO driven matrix keypad device tree bindings
-
-GPIO driven matrix keypad is used to interface a SoC with a matrix keypad.
-The matrix keypad supports multiple row and column lines, a key can be
-placed at each intersection of a unique row and a unique column. The matrix
-keypad can sense a key-press and key-release by means of GPIO lines and
-report the event using GPIO interrupts to the cpu.
-
-Required Properties:
-- compatible:		Should be "gpio-matrix-keypad"
-- row-gpios:		List of gpios used as row lines. The gpio specifier
-			for this property depends on the gpio controller to
-			which these row lines are connected.
-- col-gpios:		List of gpios used as column lines. The gpio specifier
-			for this property depends on the gpio controller to
-			which these column lines are connected.
-- linux,keymap:		The definition can be found at
-			bindings/input/matrix-keymap.txt
-
-Optional Properties:
-- linux,no-autorepeat:	do no enable autorepeat feature.
-- wakeup-source:	use any event on keypad as wakeup event.
-			(Legacy property supported: "linux,wakeup")
-- debounce-delay-ms:	debounce interval in milliseconds
-- col-scan-delay-us:	delay, measured in microseconds, that is needed
-			before we can scan keypad after activating column gpio
-- drive-inactive-cols:	drive inactive columns during scan,
-			default is to turn inactive columns into inputs.
-
-Example:
-	matrix-keypad {
-		compatible = "gpio-matrix-keypad";
-		debounce-delay-ms = <5>;
-		col-scan-delay-us = <2>;
-
-		row-gpios = <&gpio2 25 0
-			     &gpio2 26 0
-			     &gpio2 27 0>;
-
-		col-gpios = <&gpio2 21 0
-			     &gpio2 22 0>;
-
-		linux,keymap = <0x0000008B
-				0x0100009E
-				0x02000069
-				0x0001006A
-				0x0101001C
-				0x0201006C>;
-	};
diff --git a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.yaml b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.yaml
new file mode 100644
index 000000000000..ebfff9e42a36
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/input/gpio-matrix-keypad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO matrix keypad
+
+maintainers:
+  - Marek Vasut <marek.vasut@gmail.com>
+
+description:
+  GPIO driven matrix keypad is used to interface a SoC with a matrix keypad.
+  The matrix keypad supports multiple row and column lines, a key can be
+  placed at each intersection of a unique row and a unique column. The matrix
+  keypad can sense a key-press and key-release by means of GPIO lines and
+  report the event using GPIO interrupts to the cpu.
+
+allOf:
+  - $ref: /schemas/input/matrix-keymap.yaml#
+
+properties:
+  compatible:
+    const: gpio-matrix-keypad
+
+  row-gpios:
+    description:
+      List of GPIOs used as row lines. The gpio specifier for this property
+      depends on the gpio controller to which these row lines are connected.
+
+  col-gpios:
+    description:
+      List of GPIOs used as column lines. The gpio specifier for this property
+      depends on the gpio controller to which these column lines are connected.
+
+  linux,keymap: true
+
+  linux,no-autorepeat:
+    type: boolean
+    description: Do not enable autorepeat feature.
+
+  gpio-activelow:
+    type: boolean
+    description:
+      Force GPIO polarity to active low.
+      In the absence of this property GPIOs are treated as active high.
+
+  debounce-delay-ms:
+    description: Debounce interval in milliseconds.
+    default: 0
+
+  col-scan-delay-us:
+    description:
+      Delay, measured in microseconds, that is needed
+      before we can scan keypad after activating column gpio.
+    default: 0
+
+  all-cols-on-delay-us:
+    description:
+      Delay, measured in microseconds, that is needed
+      after activating all column gpios.
+    default: 0
+
+  drive-inactive-cols:
+    type: boolean
+    description:
+      Drive inactive columns during scan,
+      default is to turn inactive columns into inputs.
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - row-gpios
+  - col-gpios
+  - linux,keymap
+
+additionalProperties: false
+
+examples:
+  - |
+    matrix-keypad {
+        compatible = "gpio-matrix-keypad";
+        debounce-delay-ms = <5>;
+        col-scan-delay-us = <2>;
+
+        row-gpios = <&gpio2 25 0
+                     &gpio2 26 0
+                     &gpio2 27 0>;
+
+        col-gpios = <&gpio2 21 0
+                     &gpio2 22 0>;
+
+        linux,keymap = <0x0000008B
+                        0x0100009E
+                        0x02000069
+                        0x0001006A
+                        0x0101001C
+                        0x0201006C>;
+
+        wakeup-source;
+    };
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8921-keypad.yaml b/Documentation/devicetree/bindings/input/qcom,pm8921-keypad.yaml
index 88764adcd696..e03611eef93d 100644
--- a/Documentation/devicetree/bindings/input/qcom,pm8921-keypad.yaml
+++ b/Documentation/devicetree/bindings/input/qcom,pm8921-keypad.yaml
@@ -62,28 +62,28 @@ unevaluatedProperties: false
 
 examples:
   - |
-   #include <dt-bindings/input/input.h>
-   #include <dt-bindings/interrupt-controller/irq.h>
-   pmic {
-       #address-cells = <1>;
-       #size-cells = <0>;
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
 
-       keypad@148 {
-           compatible = "qcom,pm8921-keypad";
-           reg = <0x148>;
-           interrupt-parent = <&pmicintc>;
-           interrupts = <74 IRQ_TYPE_EDGE_RISING>, <75 IRQ_TYPE_EDGE_RISING>;
-           linux,keymap = <
-               MATRIX_KEY(0, 0, KEY_VOLUMEUP)
-               MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
-               MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
-               MATRIX_KEY(0, 3, KEY_CAMERA)
-           >;
-           keypad,num-rows = <1>;
-           keypad,num-columns = <5>;
-           debounce = <15>;
-           scan-delay = <32>;
-           row-hold = <91500>;
-       };
-   };
+        keypad@148 {
+            compatible = "qcom,pm8921-keypad";
+            reg = <0x148>;
+            interrupt-parent = <&pmicintc>;
+            interrupts = <74 IRQ_TYPE_EDGE_RISING>, <75 IRQ_TYPE_EDGE_RISING>;
+            linux,keymap = <
+                MATRIX_KEY(0, 0, KEY_VOLUMEUP)
+                MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
+                MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
+                MATRIX_KEY(0, 3, KEY_CAMERA)
+            >;
+            keypad,num-rows = <1>;
+            keypad,num-columns = <5>;
+            debounce = <15>;
+            scan-delay = <32>;
+            row-hold = <91500>;
+        };
+    };
 ...
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8921-pwrkey.yaml b/Documentation/devicetree/bindings/input/qcom,pm8921-pwrkey.yaml
index 12c74c083258..64590894857a 100644
--- a/Documentation/devicetree/bindings/input/qcom,pm8921-pwrkey.yaml
+++ b/Documentation/devicetree/bindings/input/qcom,pm8921-pwrkey.yaml
@@ -52,24 +52,24 @@ unevaluatedProperties: false
 
 examples:
   - |
-   #include <dt-bindings/interrupt-controller/irq.h>
-   ssbi {
-     #address-cells = <1>;
-     #size-cells = <0>;
+    #include <dt-bindings/interrupt-controller/irq.h>
+    ssbi {
+        #address-cells = <1>;
+        #size-cells = <0>;
 
-     pmic@0 {
-       reg = <0x0>;
-       #address-cells = <1>;
-       #size-cells = <0>;
+        pmic@0 {
+            reg = <0x0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
 
-       pwrkey@1c {
-         compatible = "qcom,pm8921-pwrkey";
-         reg = <0x1c>;
-         interrupt-parent = <&pmicint>;
-         interrupts = <50 IRQ_TYPE_EDGE_RISING>, <51 IRQ_TYPE_EDGE_RISING>;
-         debounce = <15625>;
-         pull-up;
-       };
-     };
-   };
+            pwrkey@1c {
+                compatible = "qcom,pm8921-pwrkey";
+                reg = <0x1c>;
+                interrupt-parent = <&pmicint>;
+                interrupts = <50 IRQ_TYPE_EDGE_RISING>, <51 IRQ_TYPE_EDGE_RISING>;
+                debounce = <15625>;
+                pull-up;
+            };
+        };
+    };
 ...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/apple,z2-multitouch.yaml b/Documentation/devicetree/bindings/input/touchscreen/apple,z2-multitouch.yaml
new file mode 100644
index 000000000000..402ca6bffd34
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/apple,z2-multitouch.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/apple,z2-multitouch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple touchscreens attached using the Z2 protocol
+
+maintainers:
+  - Sasha Finkelstein <fnkl.kernel@gmail.com>
+
+description: A series of touschscreen controllers used in Apple products
+
+allOf:
+  - $ref: touchscreen.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - apple,j293-touchbar
+      - apple,j493-touchbar
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  firmware-name:
+    maxItems: 1
+
+  apple,z2-cal-blob:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    maxItems: 4096
+    description:
+      Calibration blob supplied by the bootloader
+
+required:
+  - compatible
+  - interrupts
+  - reset-gpios
+  - firmware-name
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@0 {
+            compatible = "apple,j293-touchbar";
+            reg = <0>;
+            spi-max-frequency = <11500000>;
+            reset-gpios = <&pinctrl_ap 139 GPIO_ACTIVE_LOW>;
+            interrupts-extended = <&pinctrl_ap 194 IRQ_TYPE_EDGE_FALLING>;
+            firmware-name = "apple/dfrmtfw-j293.bin";
+            touchscreen-size-x = <23045>;
+            touchscreen-size-y = <640>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix,gt9916.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix,gt9916.yaml
index d90f045ac06c..c40d92b7f4af 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/goodix,gt9916.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix,gt9916.yaml
@@ -19,6 +19,7 @@ allOf:
 properties:
   compatible:
     enum:
+      - goodix,gt9897
       - goodix,gt9916
 
   reg:
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml b/Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml
index 604921733d2c..8f6335d7da1c 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml
@@ -164,20 +164,20 @@ examples:
         #size-cells = <0>;
 
         touchscreen@0 {
-           compatible = "ti,tsc2046";
-           reg = <0>;	/* CS0 */
-           interrupt-parent = <&gpio1>;
-           interrupts = <8 0>;	/* BOOT6 / GPIO 8 */
-           pendown-gpio = <&gpio1 8 0>;
-           spi-max-frequency = <1000000>;
-           vcc-supply = <&reg_vcc3>;
-           wakeup-source;
-
-           ti,pressure-max = /bits/ 16 <255>;
-           ti,x-max = /bits/ 16 <8000>;
-           ti,x-min = /bits/ 16 <0>;
-           ti,x-plate-ohms = /bits/ 16 <40>;
-           ti,y-max = /bits/ 16 <4800>;
-           ti,y-min = /bits/ 16 <0>;
-       };
+            compatible = "ti,tsc2046";
+            reg = <0>;	/* CS0 */
+            interrupt-parent = <&gpio1>;
+            interrupts = <8 0>;	/* BOOT6 / GPIO 8 */
+            pendown-gpio = <&gpio1 8 0>;
+            spi-max-frequency = <1000000>;
+            vcc-supply = <&reg_vcc3>;
+            wakeup-source;
+
+            ti,pressure-max = /bits/ 16 <255>;
+            ti,x-max = /bits/ 16 <8000>;
+            ti,x-min = /bits/ 16 <0>;
+            ti,x-plate-ohms = /bits/ 16 <40>;
+            ti,y-max = /bits/ 16 <4800>;
+            ti,y-min = /bits/ 16 <0>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/power/wakeup-source.txt b/Documentation/devicetree/bindings/power/wakeup-source.txt
index 27f1797be963..66bb016305f9 100644
--- a/Documentation/devicetree/bindings/power/wakeup-source.txt
+++ b/Documentation/devicetree/bindings/power/wakeup-source.txt
@@ -23,7 +23,7 @@ List of legacy properties and respective binding document
 
 1. "gpio-key,wakeup"		Documentation/devicetree/bindings/input/gpio-keys{,-polled}.txt
 2. "has-tpo"			Documentation/devicetree/bindings/rtc/rtc-opal.txt
-3. "linux,wakeup"		Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
+3. "linux,wakeup"		Documentation/devicetree/bindings/input/gpio-matrix-keypad.yaml
 				Documentation/devicetree/bindings/mfd/tc3589x.txt
 				Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml
 4. "linux,keypad-wakeup"	Documentation/devicetree/bindings/input/qcom,pm8921-keypad.yaml
diff --git a/MAINTAINERS b/MAINTAINERS
index 3241c8d2b258..349ec6815ff7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2268,6 +2268,7 @@ F:	Documentation/devicetree/bindings/clock/apple,nco.yaml
 F:	Documentation/devicetree/bindings/cpufreq/apple,cluster-cpufreq.yaml
 F:	Documentation/devicetree/bindings/dma/apple,admac.yaml
 F:	Documentation/devicetree/bindings/i2c/apple,i2c.yaml
+F:	Documentation/devicetree/bindings/input/touchscreen/apple,z2-multitouch.yaml
 F:	Documentation/devicetree/bindings/interrupt-controller/apple,*
 F:	Documentation/devicetree/bindings/iommu/apple,dart.yaml
 F:	Documentation/devicetree/bindings/iommu/apple,sart.yaml
@@ -2290,6 +2291,7 @@ F:	drivers/dma/apple-admac.c
 F:	drivers/pmdomain/apple/
 F:	drivers/i2c/busses/i2c-pasemi-core.c
 F:	drivers/i2c/busses/i2c-pasemi-platform.c
+F:	drivers/input/touchscreen/apple_z2.c
 F:	drivers/iommu/apple-dart.c
 F:	drivers/iommu/io-pgtable-dart.c
 F:	drivers/irqchip/irq-apple-aic.c
diff --git a/drivers/input/joystick/walkera0701.c b/drivers/input/joystick/walkera0701.c
index 59eea813f258..15370fb82317 100644
--- a/drivers/input/joystick/walkera0701.c
+++ b/drivers/input/joystick/walkera0701.c
@@ -232,8 +232,7 @@ static void walkera0701_attach(struct parport *pp)
 		goto err_unregister_device;
 	}
 
-	hrtimer_init(&w->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
-	w->timer.function = timer_handler;
+	hrtimer_setup(&w->timer, timer_handler, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
 
 	w->input_dev = input_allocate_device();
 	if (!w->input_dev) {
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index 5eef66516e37..166cfc67d98b 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -590,9 +590,8 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
 
 		INIT_DELAYED_WORK(&bdata->work, gpio_keys_gpio_work_func);
 
-		hrtimer_init(&bdata->debounce_timer,
-			     CLOCK_REALTIME, HRTIMER_MODE_REL);
-		bdata->debounce_timer.function = gpio_keys_debounce_timer;
+		hrtimer_setup(&bdata->debounce_timer, gpio_keys_debounce_timer, CLOCK_REALTIME,
+			      HRTIMER_MODE_REL);
 
 		isr = gpio_keys_gpio_isr;
 		irqflags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING;
@@ -628,9 +627,8 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
 		}
 
 		bdata->release_delay = button->debounce_interval;
-		hrtimer_init(&bdata->release_timer,
-			     CLOCK_REALTIME, HRTIMER_MODE_REL_HARD);
-		bdata->release_timer.function = gpio_keys_irq_timer;
+		hrtimer_setup(&bdata->release_timer, gpio_keys_irq_timer, CLOCK_REALTIME,
+			      HRTIMER_MODE_REL_HARD);
 
 		isr = gpio_keys_irq_isr;
 		irqflags = 0;
diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
index 2a3b3bfc2878..e46473cb817c 100644
--- a/drivers/input/keyboard/matrix_keypad.c
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -26,6 +26,7 @@ struct matrix_keypad {
 	unsigned int row_shift;
 
 	unsigned int col_scan_delay_us;
+	unsigned int all_cols_on_delay_us;
 	/* key debounce interval in milli-second */
 	unsigned int debounce_ms;
 	bool drive_inactive_cols;
@@ -68,7 +69,7 @@ static void activate_col(struct matrix_keypad *keypad, int col, bool on)
 	__activate_col(keypad, col, on);
 
 	if (on && keypad->col_scan_delay_us)
-		udelay(keypad->col_scan_delay_us);
+		fsleep(keypad->col_scan_delay_us);
 }
 
 static void activate_all_cols(struct matrix_keypad *keypad, bool on)
@@ -77,6 +78,9 @@ static void activate_all_cols(struct matrix_keypad *keypad, bool on)
 
 	for (col = 0; col < keypad->num_col_gpios; col++)
 		__activate_col(keypad, col, on);
+
+	if (on && keypad->all_cols_on_delay_us)
+		fsleep(keypad->all_cols_on_delay_us);
 }
 
 static bool row_asserted(struct matrix_keypad *keypad, int row)
@@ -392,6 +396,8 @@ static int matrix_keypad_probe(struct platform_device *pdev)
 				 &keypad->debounce_ms);
 	device_property_read_u32(&pdev->dev, "col-scan-delay-us",
 				 &keypad->col_scan_delay_us);
+	device_property_read_u32(&pdev->dev, "all-cols-on-delay-us",
+				 &keypad->all_cols_on_delay_us);
 
 	err = matrix_keypad_init_gpio(pdev, keypad);
 	if (err)
diff --git a/drivers/input/misc/pm8941-pwrkey.c b/drivers/input/misc/pm8941-pwrkey.c
index d0c46665e527..d952c16f2458 100644
--- a/drivers/input/misc/pm8941-pwrkey.c
+++ b/drivers/input/misc/pm8941-pwrkey.c
@@ -154,8 +154,8 @@ static irqreturn_t pm8941_pwrkey_irq(int irq, void *_data)
 	if (pwrkey->sw_debounce_time_us) {
 		if (ktime_before(ktime_get(), pwrkey->sw_debounce_end_time)) {
 			dev_dbg(pwrkey->dev,
-				"ignoring key event received before debounce end %llu us\n",
-				pwrkey->sw_debounce_end_time);
+				"ignoring key event received before debounce end %lld us\n",
+				ktime_to_us(pwrkey->sw_debounce_end_time));
 			return IRQ_HANDLED;
 		}
 	}
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index aba57abe6978..309c360aab55 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -161,6 +161,7 @@ static const char * const topbuttonpad_pnp_ids[] = {
 	NULL
 };
 
+#ifdef CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS
 static const char * const smbus_pnp_ids[] = {
 	/* all of the topbuttonpad_pnp_ids are valid, we just add some extras */
 	"LEN0048", /* X1 Carbon 3 */
@@ -196,6 +197,7 @@ static const char * const smbus_pnp_ids[] = {
 	"SYN3257", /* HP Envy 13-ad105ng */
 	NULL
 };
+#endif
 
 static const char * const forcepad_pnp_ids[] = {
 	"SYN300D",
diff --git a/drivers/input/rmi4/rmi_f54.c b/drivers/input/rmi4/rmi_f54.c
index 5c3da910b5b2..ac4041a69fcd 100644
--- a/drivers/input/rmi4/rmi_f54.c
+++ b/drivers/input/rmi4/rmi_f54.c
@@ -372,8 +372,6 @@ static const struct vb2_ops rmi_f54_queue_ops = {
 	.queue_setup            = rmi_f54_queue_setup,
 	.buf_queue              = rmi_f54_buffer_queue,
 	.stop_streaming		= rmi_f54_stop_streaming,
-	.wait_prepare           = vb2_ops_wait_prepare,
-	.wait_finish            = vb2_ops_wait_finish,
 };
 
 static const struct vb2_queue rmi_f54_queue = {
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 1a03de7fcfa6..91a2b584dab1 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -103,6 +103,19 @@ config TOUCHSCREEN_ADC
 	  To compile this driver as a module, choose M here: the
 	  module will be called resistive-adc-touch.ko.
 
+config TOUCHSCREEN_APPLE_Z2
+	tristate "Apple Z2 touchscreens"
+	default ARCH_APPLE
+	depends on SPI && (ARCH_APPLE || COMPILE_TEST)
+	help
+	  Say Y here if you have an ARM Apple device with
+	  a touchscreen or a touchbar.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called apple_z2.
+
 config TOUCHSCREEN_AR1021_I2C
 	tristate "Microchip AR1020/1021 i2c touchscreen"
 	depends on I2C && OF
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 82bc837ca01e..97a025c6a377 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_TOUCHSCREEN_AD7879_I2C)	+= ad7879-i2c.o
 obj-$(CONFIG_TOUCHSCREEN_AD7879_SPI)	+= ad7879-spi.o
 obj-$(CONFIG_TOUCHSCREEN_ADC)		+= resistive-adc-touch.o
 obj-$(CONFIG_TOUCHSCREEN_ADS7846)	+= ads7846.o
+obj-$(CONFIG_TOUCHSCREEN_APPLE_Z2)	+= apple_z2.o
 obj-$(CONFIG_TOUCHSCREEN_AR1021_I2C)	+= ar1021_i2c.o
 obj-$(CONFIG_TOUCHSCREEN_ATMEL_MXT)	+= atmel_mxt_ts.o
 obj-$(CONFIG_TOUCHSCREEN_AUO_PIXCIR)	+= auo-pixcir-ts.o
diff --git a/drivers/input/touchscreen/apple_z2.c b/drivers/input/touchscreen/apple_z2.c
new file mode 100644
index 000000000000..0de161eae59a
--- /dev/null
+++ b/drivers/input/touchscreen/apple_z2.c
@@ -0,0 +1,477 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Apple Z2 touchscreen driver
+ *
+ * Copyright (C) The Asahi Linux Contributors
+ */
+
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/spi/spi.h>
+#include <linux/unaligned.h>
+
+#define APPLE_Z2_NUM_FINGERS_OFFSET      16
+#define APPLE_Z2_FINGERS_OFFSET          24
+#define APPLE_Z2_TOUCH_STARTED           3
+#define APPLE_Z2_TOUCH_MOVED             4
+#define APPLE_Z2_CMD_READ_INTERRUPT_DATA 0xEB
+#define APPLE_Z2_HBPP_CMD_BLOB           0x3001
+#define APPLE_Z2_FW_MAGIC                0x5746325A
+#define LOAD_COMMAND_INIT_PAYLOAD        0
+#define LOAD_COMMAND_SEND_BLOB           1
+#define LOAD_COMMAND_SEND_CALIBRATION    2
+#define CAL_PROP_NAME                    "apple,z2-cal-blob"
+
+struct apple_z2 {
+	struct spi_device *spidev;
+	struct gpio_desc *reset_gpio;
+	struct input_dev *input_dev;
+	struct completion boot_irq;
+	bool booted;
+	int index_parity;
+	struct touchscreen_properties props;
+	const char *fw_name;
+	u8 *tx_buf;
+	u8 *rx_buf;
+};
+
+struct apple_z2_finger {
+	u8 finger;
+	u8 state;
+	__le16 unknown2;
+	__le16 abs_x;
+	__le16 abs_y;
+	__le16 rel_x;
+	__le16 rel_y;
+	__le16 tool_major;
+	__le16 tool_minor;
+	__le16 orientation;
+	__le16 touch_major;
+	__le16 touch_minor;
+	__le16 unused[2];
+	__le16 pressure;
+	__le16 multi;
+} __packed;
+
+struct apple_z2_hbpp_blob_hdr {
+	__le16 cmd;
+	__le16 len;
+	__le32 addr;
+	__le16 checksum;
+};
+
+struct apple_z2_fw_hdr {
+	__le32 magic;
+	__le32 version;
+};
+
+struct apple_z2_read_interrupt_cmd {
+	u8 cmd;
+	u8 counter;
+	u8 unused[12];
+	__le16 checksum;
+};
+
+static void apple_z2_parse_touches(struct apple_z2 *z2,
+				   const u8 *msg, size_t msg_len)
+{
+	int i;
+	int nfingers;
+	int slot;
+	int slot_valid;
+	struct apple_z2_finger *fingers;
+
+	if (msg_len <= APPLE_Z2_NUM_FINGERS_OFFSET)
+		return;
+	nfingers = msg[APPLE_Z2_NUM_FINGERS_OFFSET];
+	fingers = (struct apple_z2_finger *)(msg + APPLE_Z2_FINGERS_OFFSET);
+	for (i = 0; i < nfingers; i++) {
+		slot = input_mt_get_slot_by_key(z2->input_dev, fingers[i].finger);
+		if (slot < 0) {
+			dev_warn(&z2->spidev->dev, "unable to get slot for finger\n");
+			continue;
+		}
+		slot_valid = fingers[i].state == APPLE_Z2_TOUCH_STARTED ||
+			     fingers[i].state == APPLE_Z2_TOUCH_MOVED;
+		input_mt_slot(z2->input_dev, slot);
+		if (!input_mt_report_slot_state(z2->input_dev, MT_TOOL_FINGER, slot_valid))
+			continue;
+		touchscreen_report_pos(z2->input_dev, &z2->props,
+				       le16_to_cpu(fingers[i].abs_x),
+				       le16_to_cpu(fingers[i].abs_y),
+				       true);
+		input_report_abs(z2->input_dev, ABS_MT_WIDTH_MAJOR,
+				 le16_to_cpu(fingers[i].tool_major));
+		input_report_abs(z2->input_dev, ABS_MT_WIDTH_MINOR,
+				 le16_to_cpu(fingers[i].tool_minor));
+		input_report_abs(z2->input_dev, ABS_MT_ORIENTATION,
+				 le16_to_cpu(fingers[i].orientation));
+		input_report_abs(z2->input_dev, ABS_MT_TOUCH_MAJOR,
+				 le16_to_cpu(fingers[i].touch_major));
+		input_report_abs(z2->input_dev, ABS_MT_TOUCH_MINOR,
+				 le16_to_cpu(fingers[i].touch_minor));
+	}
+	input_mt_sync_frame(z2->input_dev);
+	input_sync(z2->input_dev);
+}
+
+static int apple_z2_read_packet(struct apple_z2 *z2)
+{
+	struct apple_z2_read_interrupt_cmd *len_cmd = (void *)z2->tx_buf;
+	struct spi_transfer xfer;
+	int error;
+	size_t pkt_len;
+
+	memset(&xfer, 0, sizeof(xfer));
+	len_cmd->cmd = APPLE_Z2_CMD_READ_INTERRUPT_DATA;