Merge tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:

 - Add support in dmaengine core to do device node checks for DT devices
   and update bunch of drivers to use that and remove open coding from
   drivers

 - New driver/driver support for new hardware, namely:
     - MediaTek UART APDMA
     - Freescale i.mx7ulp edma2
     - Synopsys eDMA IP core version 0
     - Allwinner H6 DMA

 - Updates to axi-dma and support for interleaved cyclic transfers

 - Greg's debugfs return value check removals on drivers

 - Updates to stm32-dma, hsu, dw, pl330, tegra drivers

* tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits)
  dmaengine: Revert "dmaengine: fsl-edma: add i.mx7ulp edma2 version support"
  dmaengine: at_xdmac: check for non-empty xfers_list before invoking callback
  Documentation: dmaengine: clean up description of dmatest usage
  dmaengine: tegra210-adma: remove PM_CLK dependency
  dmaengine: fsl-edma: add i.mx7ulp edma2 version support
  dt-bindings: dma: fsl-edma: add new i.mx7ulp-edma
  dmaengine: fsl-edma-common: version check for v2 instead
  dmaengine: fsl-edma-common: move dmamux register to another single function
  dmaengine: fsl-edma: add drvdata for fsl-edma
  dmaengine: Revert "dmaengine: fsl-edma: support little endian for edma driver"
  dmaengine: rcar-dmac: Reject zero-length slave DMA requests
  dmaengine: dw: Enable iDMA 32-bit on Intel Elkhart Lake
  dmaengine: dw-edma: fix semicolon.cocci warnings
  dmaengine: sh: usb-dmac: Use [] to denote a flexible array member
  dmaengine: dmatest: timeout value of -1 should specify infinite wait
  dmaengine: dw: Distinguish ->remove() between DW and iDMA 32-bit
  dmaengine: fsl-edma: support little endian for edma driver
  dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width"
  dmagengine: pl330: add code to get reset property
  dt-bindings: pl330: document the optional resets property
  ...

66 files changed, 3668 insertions, 795 deletions

diff --git a/Documentation/devicetree/bindings/dma/8250_mtk_dma.txt b/Documentation/devicetree/bindings/dma/8250_mtk_dma.txt
deleted file mode 100644
index 3fe0961bcf64..000000000000
--- a/Documentation/devicetree/bindings/dma/8250_mtk_dma.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-* Mediatek UART APDMA Controller
-
-Required properties:
-- compatible should contain:
-  * "mediatek,mt2712-uart-dma" for MT2712 compatible APDMA
-  * "mediatek,mt6577-uart-dma" for MT6577 and all of the above
-
-- reg: The base address of the APDMA register bank.
-
-- interrupts: A single interrupt specifier.
-
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: The APDMA clock for register accesses
-
-Examples:
-
-	apdma: dma-controller@11000380 {
-		compatible = "mediatek,mt2712-uart-dma";
-		reg = <0 0x11000380 0 0x400>;
-		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 64 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 65 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 66 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 67 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 68 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 69 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 70 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_AP_DMA>;
-		clock-names = "apdma";
-		#dma-cells = <1>;
-	};
-
diff --git a/Documentation/devicetree/bindings/dma/arm-pl330.txt b/Documentation/devicetree/bindings/dma/arm-pl330.txt
index db7e2260f9c5..2c7fd1941abb 100644
--- a/Documentation/devicetree/bindings/dma/arm-pl330.txt
+++ b/Documentation/devicetree/bindings/dma/arm-pl330.txt
@@ -16,6 +16,9 @@ Optional properties:
   - dma-channels: contains the total number of DMA channels supported by the DMAC
   - dma-requests: contains the total number of DMA requests supported by the DMAC
   - arm,pl330-broken-no-flushp: quirk for avoiding to execute DMAFLUSHP
+  - resets: contains an entry for each entry in reset-names.
+	    See ../reset/reset.txt for details.
+  - reset-names: must contain at least "dma", and optional is "dma-ocp".
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/dma/fsl-edma.txt b/Documentation/devicetree/bindings/dma/fsl-edma.txt
index 97e213e07660..29dd3ccb1235 100644
--- a/Documentation/devicetree/bindings/dma/fsl-edma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-edma.txt
@@ -9,15 +9,16 @@ group, DMAMUX0 or DMAMUX1, but not both.
 Required properties:
 - compatible :
 	- "fsl,vf610-edma" for eDMA used similar to that on Vybrid vf610 SoC
+	- "fsl,imx7ulp-edma" for eDMA2 used similar to that on i.mx7ulp
 - reg : Specifies base physical address(s) and size of the eDMA registers.
 	The 1st region is eDMA control register's address and size.
 	The 2nd and the 3rd regions are programmable channel multiplexing
 	control register's address and size.
 - interrupts : A list of interrupt-specifiers, one for each entry in
-	interrupt-names.
-- interrupt-names : Should contain:
-	"edma-tx" - the transmission interrupt
-	"edma-err" - the error interrupt
+	interrupt-names on vf610 similar SoC. But for i.mx7ulp per channel
+	per transmission interrupt, total 16 channel interrupt and 1
+	error interrupt(located in the last), no interrupt-names list on
+	i.mx7ulp for clean on dts.
 - #dma-cells : Must be <2>.
 	The 1st cell specifies the DMAMUX(0 for DMAMUX0 and 1 for DMAMUX1).
 	Specific request source can only be multiplexed by specific channels
@@ -28,6 +29,7 @@ Required properties:
 - clock-names : A list of channel group clock names. Should contain:
 	"dmamux0" - clock name of mux0 group
 	"dmamux1" - clock name of mux1 group
+	Note: No dmamux0 on i.mx7ulp, but another 'dma' clk added on i.mx7ulp.
 - clocks : A list of phandle and clock-specifier pairs, one for each entry in
 	clock-names.
 
@@ -35,6 +37,10 @@ Optional properties:
 - big-endian: If present registers and hardware scatter/gather descriptors
 	of the eDMA are implemented in big endian mode, otherwise in little
 	mode.
+- interrupt-names : Should contain the below on vf610 similar SoC but not used
+	on i.mx7ulp similar SoC:
+	"edma-tx" - the transmission interrupt
+	"edma-err" - the error interrupt
 
 
 Examples:
@@ -52,8 +58,36 @@ edma0: dma-controller@40018000 {
 	clock-names = "dmamux0", "dmamux1";
 	clocks = <&clks VF610_CLK_DMAMUX0>,
 		<&clks VF610_CLK_DMAMUX1>;
-};
+}; /* vf610 */
 
+edma1: dma-controller@40080000 {
+	#dma-cells = <2>;
+	compatible = "fsl,imx7ulp-edma";
+	reg = <0x40080000 0x2000>,
+		<0x40210000 0x1000>;
+	dma-channels = <32>;
+	interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+		     /* last is eDMA2-ERR interrupt */
+		     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+	clock-names = "dma", "dmamux0";
+	clocks = <&pcc2 IMX7ULP_CLK_DMA1>,
+		 <&pcc2 IMX7ULP_CLK_DMA_MUX1>;
+}; /* i.mx7ulp */
 
 * DMA clients
 DMA client drivers that uses the DMA function must use the format described
diff --git a/Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt b/Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt
new file mode 100644
index 000000000000..5d6f98c43e3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt
@@ -0,0 +1,54 @@
+* Mediatek UART APDMA Controller
+
+Required properties:
+- compatible should contain:
+  * "mediatek,mt2712-uart-dma" for MT2712 compatible APDMA
+  * "mediatek,mt6577-uart-dma" for MT6577 and all of the above
+
+- reg: The base address of the APDMA register bank.
+
+- interrupts: A single interrupt specifier.
+ One interrupt per dma-requests, or 8 if no dma-requests property is present
+
+- dma-requests: The number of DMA channels
+
+- clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names: The APDMA clock for register accesses
+
+- mediatek,dma-33bits: Present if the DMA requires support
+
+Examples:
+
+	apdma: dma-controller@11000400 {
+		compatible = "mediatek,mt2712-uart-dma";
+		reg = <0 0x11000400 0 0x80>,
+		      <0 0x11000480 0 0x80>,
+		      <0 0x11000500 0 0x80>,
+		      <0 0x11000580 0 0x80>,
+		      <0 0x11000600 0 0x80>,
+		      <0 0x11000680 0 0x80>,
+		      <0 0x11000700 0 0x80>,
+		      <0 0x11000780 0 0x80>,
+		      <0 0x11000800 0 0x80>,
+		      <0 0x11000880 0 0x80>,
+		      <0 0x11000900 0 0x80>,
+		      <0 0x11000980 0 0x80>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 105 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>;
+		dma-requests = <12>;
+		clocks = <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "apdma";
+		mediatek,dma-33bits;
+		#dma-cells = <1>;
+	};
diff --git a/Documentation/devicetree/bindings/dma/sun6i-dma.txt b/Documentation/devicetree/bindings/dma/sun6i-dma.txt
index 7fccc20d8331..cae31f4e77ba 100644
--- a/Documentation/devicetree/bindings/dma/sun6i-dma.txt
+++ b/Documentation/devicetree/bindings/dma/sun6i-dma.txt
@@ -28,12 +28,17 @@ Example:
 	};
 
 ------------------------------------------------------------------------------
-For A64 DMA controller:
+For A64 and H6 DMA controller:
 
 Required properties:
-- compatible:	"allwinner,sun50i-a64-dma"
+- compatible:	Must be one of
+		  "allwinner,sun50i-a64-dma"
+		  "allwinner,sun50i-h6-dma"
 - dma-channels: Number of DMA channels supported by the controller.
 		Refer to Documentation/devicetree/bindings/dma/dma.txt
+- clocks:	In addition to parent AHB clock, it should also contain mbus
+		clock (H6 only)
+- clock-names:	Should contain "bus" and "mbus" (H6 only)
 - all properties above, i.e. reg, interrupts, clocks, resets and #dma-cells
 
 Optional properties:
diff --git a/Documentation/driver-api/dmaengine/dmatest.rst b/Documentation/driver-api/dmaengine/dmatest.rst
index e78d070bb468..ee268d445d38 100644
--- a/Documentation/driver-api/dmaengine/dmatest.rst
+++ b/Documentation/driver-api/dmaengine/dmatest.rst
@@ -44,7 +44,8 @@ Example of usage::
 
     dmatest.timeout=2000 dmatest.iterations=1 dmatest.channel=dma0chan0 dmatest.run=1
 
-Example of multi-channel test usage:
+Example of multi-channel test usage (new in the 5.0 kernel)::
+
     % modprobe dmatest
     % echo 2000 > /sys/module/dmatest/parameters/timeout
     % echo 1 > /sys/module/dmatest/parameters/iterations
@@ -53,15 +54,18 @@ Example of multi-channel test usage:
     % echo dma0chan2 > /sys/module/dmatest/parameters/channel
     % echo 1 > /sys/module/dmatest/parameters/run
 
-Note: the channel parameter should always be the last parameter set prior to
-running the test (setting run=1), this is because upon setting the channel
-parameter, that specific channel is requested using the dmaengine and a thread
-is created with the existing parameters. This thread is set as pending
-and will be executed once run is set to 1. Any parameters set after the thread
-is created are not applied.
+.. note::
+  For all tests, starting in the 5.0 kernel, either single- or multi-channel,
+  the channel parameter(s) must be set after all other parameters. It is at
+  that time that the existing parameter values are acquired for use by the
+  thread(s). All other parameters are shared. Therefore, if changes are made
+  to any of the other parameters, and an additional channel specified, the
+  (shared) parameters used for all threads will use the new values.
+  After the channels are specified, each thread is set as pending. All threads
+  begin execution when the run parameter is set to 1.
 
 .. hint::
-  available channel list could be extracted by running the following command::
+  A list of available channels can be found by running the following command::
 
     % ls -1 /sys/class/dma/
 
@@ -204,6 +208,7 @@ Releasing Channels
 Channels can be freed by setting run to 0.
 
 Example::
+
     % echo dma0chan1 > /sys/module/dmatest/parameters/channel
     dmatest: Added 1 threads using dma0chan1
     % cat /sys/class/dma/dma0chan1/in_use
diff --git a/MAINTAINERS b/MAINTAINERS
index 51ef58f15cdd..d452d7bbbaad 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4683,6 +4683,13 @@ L:	linux-mtd@lists.infradead.org
 S:	Supported
 F:	drivers/mtd/nand/raw/denali*
 
+DESIGNWARE EDMA CORE IP DRIVER
+M:	Gustavo Pimentel <gustavo.pimentel@synopsys.com>
+L:	dmaengine@vger.kernel.org
+S:	Maintained
+F:	drivers/dma/dw-edma/
+F:	include/linux/dma/edma.h
+
 DESIGNWARE USB2 DRD IP DRIVER
 M:	Minas Harutyunyan <hminas@synopsys.com>
 L:	linux-usb@vger.kernel.org
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 703275cc29de..03fa0c58cef3 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -103,6 +103,7 @@ config AXI_DMAC
 	depends on MICROBLAZE || NIOS2 || ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_SOCFPGA || COMPILE_TEST
 	select DMA_ENGINE
 	select DMA_VIRTUAL_CHANNELS
+	select REGMAP_MMIO
 	help
 	  Enable support for the Analog Devices AXI-DMAC peripheral. This DMA
 	  controller is often used in Analog Device's reference designs for FPGA
@@ -584,7 +585,7 @@ config TEGRA20_APB_DMA
 
 config TEGRA210_ADMA
 	tristate "NVIDIA Tegra210 ADMA support"
-	depends on (ARCH_TEGRA_210_SOC || COMPILE_TEST) && PM_CLK
+	depends on (ARCH_TEGRA_210_SOC || COMPILE_TEST)
 	select DMA_ENGINE
 	select DMA_VIRTUAL_CHANNELS
 	help
@@ -666,6 +667,8 @@ source "drivers/dma/qcom/Kconfig"
 
 source "drivers/dma/dw/Kconfig"
 
+source "drivers/dma/dw-edma/Kconfig"
+
 source "drivers/dma/hsu/Kconfig"
 
 source "drivers/dma/sh/Kconfig"
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 6126e1c3a875..5bddf6f8790f 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_DMA_SUN4I) += sun4i-dma.o
 obj-$(CONFIG_DMA_SUN6I) += sun6i-dma.o
 obj-$(CONFIG_DW_AXI_DMAC) += dw-axi-dmac/
 obj-$(CONFIG_DW_DMAC_CORE) += dw/
+obj-$(CONFIG_DW_EDMA) += dw-edma/
 obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o
 obj-$(CONFIG_FSL_DMA) += fsldma.o
 obj-$(CONFIG_FSL_EDMA) += fsl-edma.o fsl-edma-common.o
diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
index 464725dcad00..9adc7a2fa3d3 100644
--- a/drivers/dma/amba-pl08x.c
+++ b/drivers/dma/amba-pl08x.c
@@ -2508,9 +2508,8 @@ DEFINE_SHOW_ATTRIBUTE(pl08x_debugfs);
 static void init_pl08x_debugfs(struct pl08x_driver_data *pl08x)
 {
 	/* Expose a simple debugfs interface to view all clocks */
-	(void) debugfs_create_file(dev_name(&pl08x->adev->dev),
-			S_IFREG | S_IRUGO, NULL, pl08x,
-			&pl08x_debugfs_fops);
+	debugfs_create_file(dev_name(&pl08x->adev->dev), S_IFREG | S_IRUGO,
+			    NULL, pl08x, &pl08x_debugfs_fops);
 }
 
 #else
diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c
index 627ef3e5b312..b58ac720d9a1 100644
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -1568,11 +1568,14 @@ static void at_xdmac_handle_cyclic(struct at_xdmac_chan *atchan)
 	struct at_xdmac_desc		*desc;
 	struct dma_async_tx_descriptor	*txd;
 
-	desc = list_first_entry(&atchan->xfers_list, struct at_xdmac_desc, xfer_node);
-	txd = &desc->tx_dma_desc;
+	if (!list_empty(&atchan->xfers_list)) {
+		desc = list_first_entry(&atchan->xfers_list,
+					struct at_xdmac_desc, xfer_node);
+		txd = &desc->tx_dma_desc;
 
-	if (txd->flags & DMA_PREP_INTERRUPT)
-		dmaengine_desc_get_callback_invoke(txd, NULL);
+		if (txd->flags & DMA_PREP_INTERRUPT)
+			dmaengine_desc_get_callback_invoke(txd, NULL);
+	}
 }
 
 static void at_xdmac_handle_error(struct at_xdmac_chan *atchan)
diff --git a/drivers/dma/bcm-sba-raid.c b/drivers/dma/bcm-sba-raid.c
index fa81d0177765..275e90fa829d 100644
--- a/drivers/dma/bcm-sba-raid.c
+++ b/drivers/dma/bcm-sba-raid.c
@@ -164,7 +164,6 @@ struct sba_device {
 	struct list_head reqs_free_list;
 	/* DebugFS directory entries */
 	struct dentry *root;
-	struct dentry *stats;
 };
 
 /* ====== Command helper routines ===== */
@@ -1716,17 +1715,11 @@ static int sba_probe(struct platform_device *pdev)
 
 	/* Create debugfs root entry */
 	sba->root = debugfs_create_dir(dev_name(sba->dev), NULL);
-	if (IS_ERR_OR_NULL(sba->root)) {
-		dev_err(sba->dev, "failed to create debugfs root entry\n");
-		sba->root = NULL;
-		go