wifi: remove orphaned cisco/aironet driver

Cisco Aironet is an 802.11b PCMCIA and mini-PCI with limited support
for Cardbus DMA and for CFG80211.

Both PCMCIA and WEXT are deprecated, and there is little chance
that anyone is still using this driver, so remove it.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>

7 files changed, 0 insertions, 8579 deletions

diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 7555af5195ec..834d3725f1a5 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -22,7 +22,6 @@ source "drivers/net/wireless/admtek/Kconfig"
 source "drivers/net/wireless/ath/Kconfig"
 source "drivers/net/wireless/atmel/Kconfig"
 source "drivers/net/wireless/broadcom/Kconfig"
-source "drivers/net/wireless/cisco/Kconfig"
 source "drivers/net/wireless/intel/Kconfig"
 source "drivers/net/wireless/intersil/Kconfig"
 source "drivers/net/wireless/marvell/Kconfig"
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index 4d7374d567d1..ee722439d452 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -7,7 +7,6 @@ obj-$(CONFIG_WLAN_VENDOR_ADMTEK) += admtek/
 obj-$(CONFIG_WLAN_VENDOR_ATH) += ath/
 obj-$(CONFIG_WLAN_VENDOR_ATMEL) += atmel/
 obj-$(CONFIG_WLAN_VENDOR_BROADCOM) += broadcom/
-obj-$(CONFIG_WLAN_VENDOR_CISCO) += cisco/
 obj-$(CONFIG_WLAN_VENDOR_INTEL) += intel/
 obj-$(CONFIG_WLAN_VENDOR_INTERSIL) += intersil/
 obj-$(CONFIG_WLAN_VENDOR_MARVELL) += marvell/
diff --git a/drivers/net/wireless/cisco/Kconfig b/drivers/net/wireless/cisco/Kconfig
deleted file mode 100644
index b40ee25aca99..000000000000
--- a/drivers/net/wireless/cisco/Kconfig
+++ /dev/null
@@ -1,59 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-config WLAN_VENDOR_CISCO
-	bool "Cisco devices"
-	default y
-	help
-	  If you have a wireless card belonging to this class, say Y.
-
-	  Note that the answer to this question doesn't directly affect the
-	  kernel: saying N will just cause the configurator to skip all the
-	  questions about these cards. If you say Y, you will be asked for
-	  your specific card in the following questions.
-
-if WLAN_VENDOR_CISCO
-
-config AIRO
-	tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
-	depends on CFG80211 && (PCI || BROKEN)
-	select WIRELESS_EXT
-	select CRYPTO
-	select CRYPTO_SKCIPHER
-	select WEXT_SPY
-	select WEXT_PRIV
-	help
-	  This is the standard Linux driver to support Cisco/Aironet ISA and
-	  PCI 802.11 wireless cards.
-	  It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
-	  - with or without encryption) as well as card before the Cisco
-	  acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
-
-	  This driver support both the standard Linux Wireless Extensions
-	  and Cisco proprietary API, so both the Linux Wireless Tools and the
-	  Cisco Linux utilities can be used to configure the card.
-
-	  The driver can be compiled as a module and will be named "airo".
-
-config AIRO_CS
-	tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
-	depends on CFG80211 && PCMCIA
-	select WIRELESS_EXT
-	select WEXT_SPY
-	select WEXT_PRIV
-	select CRYPTO
-	select CRYPTO_AES
-	select CRYPTO_CTR
-	help
-	  This is the standard Linux driver to support Cisco/Aironet PCMCIA
-	  802.11 wireless cards.  This driver is the same as the Aironet
-	  driver part of the Linux Pcmcia package.
-	  It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
-	  - with or without encryption) as well as card before the Cisco
-	  acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
-	  supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
-	  802.11b cards.
-
-	  This driver support both the standard Linux Wireless Extensions
-	  and Cisco proprietary API, so both the Linux Wireless Tools and the
-	  Cisco Linux utilities can be used to configure the card.
-
-endif # WLAN_VENDOR_CISCO
diff --git a/drivers/net/wireless/cisco/Makefile b/drivers/net/wireless/cisco/Makefile
deleted file mode 100644
index 506a19ce375f..000000000000
--- a/drivers/net/wireless/cisco/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_AIRO)		+= airo.o
-obj-$(CONFIG_AIRO_CS)		+= airo_cs.o airo.o
diff --git a/drivers/net/wireless/cisco/airo.c b/drivers/net/wireless/cisco/airo.c
deleted file mode 100644
index 6a099642e854..000000000000
--- a/drivers/net/wireless/cisco/airo.c
+++ /dev/null
@@ -1,8287 +0,0 @@
-/*======================================================================
-
-    Aironet driver for 4500 and 4800 series cards
-
-    This code is released under both the GPL version 2 and BSD licenses.
-    Either license may be used.  The respective licenses are found at
-    the end of this file.
-
-    This code was developed by Benjamin Reed <breed@users.sourceforge.net>
-    including portions of which come from the Aironet PC4500
-    Developer's Reference Manual and used with permission.  Copyright
-    (C) 1999 Benjamin Reed.  All Rights Reserved.  Permission to use
-    code in the Developer's manual was granted for this driver by
-    Aironet.  Major code contributions were received from Javier Achirica
-    <achirica@users.sourceforge.net> and Jean Tourrilhes <jt@hpl.hp.com>.
-    Code was also integrated from the Cisco Aironet driver for Linux.
-    Support for MPI350 cards was added by Fabrice Bellet
-    <fabrice@bellet.info>.
-
-======================================================================*/
-
-#include <linux/err.h>
-#include <linux/init.h>
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/proc_fs.h>
-
-#include <linux/sched.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/in.h>
-#include <linux/bitops.h>
-#include <linux/scatterlist.h>
-#include <linux/crypto.h>
-#include <linux/io.h>
-#include <asm/unaligned.h>
-
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/if_arp.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/uaccess.h>
-#include <linux/kthread.h>
-#include <linux/freezer.h>
-
-#include <crypto/aes.h>
-#include <crypto/skcipher.h>
-
-#include <net/cfg80211.h>
-#include <net/iw_handler.h>
-
-#include "airo.h"
-
-#define DRV_NAME "airo"
-
-#ifdef CONFIG_PCI
-static const struct pci_device_id card_ids[] = {
-	{ 0x14b9, 1, PCI_ANY_ID, PCI_ANY_ID, },
-	{ 0x14b9, 0x4500, PCI_ANY_ID, PCI_ANY_ID },
-	{ 0x14b9, 0x4800, PCI_ANY_ID, PCI_ANY_ID, },
-	{ 0x14b9, 0x0340, PCI_ANY_ID, PCI_ANY_ID, },
-	{ 0x14b9, 0x0350, PCI_ANY_ID, PCI_ANY_ID, },
-	{ 0x14b9, 0x5000, PCI_ANY_ID, PCI_ANY_ID, },
-	{ 0x14b9, 0xa504, PCI_ANY_ID, PCI_ANY_ID, },
-	{ 0, }
-};
-MODULE_DEVICE_TABLE(pci, card_ids);
-
-static int airo_pci_probe(struct pci_dev *, const struct pci_device_id *);
-static void airo_pci_remove(struct pci_dev *);
-static int __maybe_unused airo_pci_suspend(struct device *dev);
-static int __maybe_unused airo_pci_resume(struct device *dev);
-
-static SIMPLE_DEV_PM_OPS(airo_pci_pm_ops,
-			 airo_pci_suspend,
-			 airo_pci_resume);
-
-static struct pci_driver airo_driver = {
-	.name      = DRV_NAME,
-	.id_table  = card_ids,
-	.probe     = airo_pci_probe,
-	.remove    = airo_pci_remove,
-	.driver.pm = &airo_pci_pm_ops,
-};
-#endif /* CONFIG_PCI */
-
-/* Include Wireless Extension definition and check version - Jean II */
-#include <linux/wireless.h>
-#define WIRELESS_SPY		/* enable iwspy support */
-
-#define CISCO_EXT		/* enable Cisco extensions */
-#ifdef CISCO_EXT
-#include <linux/delay.h>
-#endif
-
-/* Hack to do some power saving */
-#define POWER_ON_DOWN
-
-/* As you can see this list is HUGH!
-   I really don't know what a lot of these counts are about, but they
-   are all here for completeness.  If the IGNLABEL macro is put in
-   infront of the label, that statistic will not be included in the list
-   of statistics in the /proc filesystem */
-
-#define IGNLABEL(comment) NULL
-static const char *statsLabels[] = {
-	"RxOverrun",
-	IGNLABEL("RxPlcpCrcErr"),
-	IGNLABEL("RxPlcpFormatErr"),
-	IGNLABEL("RxPlcpLengthErr"),
-	"RxMacCrcErr",
-	"RxMacCrcOk",
-	"RxWepErr",
-	"RxWepOk",
-	"RetryLong",
-	"RetryShort",
-	"MaxRetries",
-	"NoAck",
-	"NoCts",
-	"RxAck",
-	"RxCts",
-	"TxAck",
-	"TxRts",
-	"TxCts",
-	"TxMc",
-	"TxBc",
-	"TxUcFrags",
-	"TxUcPackets",
-	"TxBeacon",
-	"RxBeacon",
-	"TxSinColl",
-	"TxMulColl",
-	"DefersNo",
-	"DefersProt",
-	"DefersEngy",
-	"DupFram",
-	"RxFragDisc",
-	"TxAged",
-	"RxAged",
-	"LostSync-MaxRetry",
-	"LostSync-MissedBeacons",
-	"LostSync-ArlExceeded",
-	"LostSync-Deauth",
-	"LostSync-Disassoced",
-	"LostSync-TsfTiming",
-	"HostTxMc",
-	"HostTxBc",
-	"HostTxUc",
-	"HostTxFail",
-	"HostRxMc",
-	"HostRxBc",
-	"HostRxUc",
-	"HostRxDiscard",
-	IGNLABEL("HmacTxMc"),
-	IGNLABEL("HmacTxBc"),
-	IGNLABEL("HmacTxUc"),
-	IGNLABEL("HmacTxFail"),
-	IGNLABEL("HmacRxMc"),
-	IGNLABEL("HmacRxBc"),
-	IGNLABEL("HmacRxUc"),
-	IGNLABEL("HmacRxDiscard"),
-	IGNLABEL("HmacRxAccepted"),
-	"SsidMismatch",
-	"ApMismatch",
-	"RatesMismatch",
-	"AuthReject",
-	"AuthTimeout",
-	"AssocReject",
-	"AssocTimeout",
-	IGNLABEL("ReasonOutsideTable"),
-	IGNLABEL("ReasonStatus1"),
-	IGNLABEL("ReasonStatus2"),
-	IGNLABEL("ReasonStatus3"),
-	IGNLABEL("ReasonStatus4"),
-	IGNLABEL("ReasonStatus5"),
-	IGNLABEL("ReasonStatus6"),
-	IGNLABEL("ReasonStatus7"),
-	IGNLABEL("ReasonStatus8"),
-	IGNLABEL("ReasonStatus9"),
-	IGNLABEL("ReasonStatus10"),
-	IGNLABEL("ReasonStatus11"),
-	IGNLABEL("ReasonStatus12"),
-	IGNLABEL("ReasonStatus13"),
-	IGNLABEL("ReasonStatus14"),
-	IGNLABEL("ReasonStatus15"),
-	IGNLABEL("ReasonStatus16"),
-	IGNLABEL("ReasonStatus17"),
-	IGNLABEL("ReasonStatus18"),
-	IGNLABEL("ReasonStatus19"),
-	"RxMan",
-	"TxMan",
-	"RxRefresh",
-	"TxRefresh",
-	"RxPoll",
-	"TxPoll",
-	"HostRetries",
-	"LostSync-HostReq",
-	"HostTxBytes",
-	"HostRxBytes",
-	"ElapsedUsec",
-	"ElapsedSec",
-	"LostSyncBetterAP",
-	"PrivacyMismatch",
-	"Jammed",
-	"DiscRxNotWepped",
-	"PhyEleMismatch",
-	(char*)-1 };
-#ifndef RUN_AT
-#define RUN_AT(x) (jiffies+(x))
-#endif
-
-
-/* These variables are for insmod, since it seems that the rates
-   can only be set in setup_card.  Rates should be a comma separated
-   (no spaces) list of rates (up to 8). */
-
-static int rates[8];
-static char *ssids[3];
-
-static int io[4];
-static int irq[4];
-
-static
-int maxencrypt /* = 0 */; /* The highest rate that the card can encrypt at.
-		       0 means no limit.  For old cards this was 4 */
-
-static int auto_wep /* = 0 */; /* If set, it tries to figure out the wep mode */
-static int aux_bap /* = 0 */; /* Checks to see if the aux ports are needed to read
-		    the bap, needed on some older cards and buses. */
-static int adhoc;
-
-static int probe = 1;
-
-static kuid_t proc_kuid;
-static int proc_uid /* = 0 */;
-
-static kgid_t proc_kgid;
-static int proc_gid /* = 0 */;
-
-static int airo_perm = 0555;
-
-static int proc_perm = 0644;
-
-MODULE_AUTHOR("Benjamin Reed");
-MODULE_DESCRIPTION("Support for Cisco/Aironet 802.11 wireless ethernet cards.  "
-		   "Direct support for ISA/PCI/MPI cards and support for PCMCIA when used with airo_cs.");
-MODULE_LICENSE("Dual BSD/GPL");
-module_param_hw_array(io, int, ioport, NULL, 0);
-module_param_hw_array(irq, int, irq, NULL, 0);
-module_param_array(rates, int, NULL, 0);
-module_param_array(ssids, charp, NULL, 0);
-module_param(auto_wep, int, 0);
-MODULE_PARM_DESC(auto_wep,
-		 "If non-zero, the driver will keep looping through the authentication options until an association is made.  "
-		 "The value of auto_wep is number of the wep keys to check.  "
-		 "A value of 2 will try using the key at index 0 and index 1.");
-module_param(aux_bap, int, 0);
-MODULE_PARM_DESC(aux_bap,
-		 "If non-zero, the driver will switch into a mode that seems to work better for older cards with some older buses.  "
-		 "Before switching it checks that the switch is needed.");
-module_param(maxencrypt, int, 0);
-MODULE_PARM_DESC(maxencrypt,
-		 "The maximum speed that the card can do encryption.  "
-		 "Units are in 512kbs.  "
-		 "Zero (default) means there is no limit.  "
-		 "Older cards used to be limited to 2mbs (4).");
-module_param(adhoc, int, 0);
-MODULE_PARM_DESC(adhoc, "If non-zero, the card will start in adhoc mode.");
-module_param(probe, int, 0);
-MODULE_PARM_DESC(probe, "If zero, the driver won't start the card.");
-
-module_param(proc_uid, int, 0);
-MODULE_PARM_DESC(proc_uid, "The uid that the /proc files will belong to.");
-module_param(proc_gid, int, 0);
-MODULE_PARM_DESC(proc_gid, "The gid that the /proc files will belong to.");
-module_param(airo_perm, int, 0);
-MODULE_PARM_DESC(airo_perm, "The permission bits of /proc/[driver/]aironet.");
-module_param(proc_perm, int, 0);
-MODULE_PARM_DESC(proc_perm, "The permission bits of the files in /proc");
-
-/* This is a kind of sloppy hack to get this information to OUT4500 and
-   IN4500.  I would be extremely interested in the situation where this
-   doesn't work though!!! */
-static int do8bitIO /* = 0 */;
-
-/* Return codes */
-#define SUCCESS 0
-#define ERROR -1
-#define NO_PACKET -2
-
-/* Commands */
-#define NOP2		0x0000
-#define MAC_ENABLE	0x0001
-#define MAC_DISABLE	0x0002
-#define CMD_LOSE_SYNC	0x0003 /* Not sure what this does... */
-#define CMD_SOFTRESET	0x0004
-#define HOSTSLEEP	0x0005
-#define CMD_MAGIC_PKT	0x0006
-#define CMD_SETWAKEMASK	0x0007
-#define CMD_READCFG	0x0008
-#define CMD_SETMODE	0x0009
-#define CMD_ALLOCATETX	0x000a
-#define CMD_TRANSMIT	0x000b
-#define CMD_DEALLOCATETX 0x000c
-#define NOP		0x0010
-#define CMD_WORKAROUND	0x0011
-#define CMD_ALLOCATEAUX 0x0020
-#define CMD_ACCESS	0x0021
-#define CMD_PCIBAP	0x0022
-#define CMD_PCIAUX	0x0023
-#define CMD_ALLOCBUF	0x0028
-#define CMD_GETTLV	0x0029
-#define CMD_PUTTLV	0x002a
-#define CMD_DELTLV	0x002b
-#define CMD_FINDNEXTTLV	0x002c
-#define CMD_PSPNODES	0x0030
-#define CMD_SETCW	0x0031
-#define CMD_SETPCF	0x0032
-#define CMD_SETPHYREG	0x003e
-#define CMD_TXTEST	0x003f
-#define MAC_ENABLETX	0x0101
-#define CMD_LISTBSS	0x0103
-#define CMD_SAVECFG	0x0108
-#define CMD_ENABLEAUX	0x0111
-#define CMD_WRITERID	0x0121
-#define CMD_USEPSPNODES	0x0130
-#define MAC_ENABLERX	0x0201
-
-/* Command errors */
-#define ERROR_QUALIF 0x00
-#define ERROR_ILLCMD 0x01
-#define ERROR_ILLFMT 0x02
-#define ERROR_INVFID 0x03
-#define ERROR_INVRID 0x04
-#define ERROR_LARGE 0x05
-#define ERROR_NDISABL 0x06
-#define ERROR_ALLOCBSY 0x07
-#define ERROR_NORD 0x0B
-#define ERROR_NOWR 0x0C
-#define ERROR_INVFIDTX 0x0D
-#define ERROR_TESTACT 0x0E
-#define ERROR_TAGNFND 0x12
-#define ERROR_DECODE 0x20
-#define ERROR_DESCUNAV 0x21
-#define ERROR_BADLEN 0x22
-#define ERROR_MODE 0x80
-#define ERROR_HOP 0x81
-#define ERROR_BINTER 0x82
-#define ERROR_RXMODE 0x83
-#define ERROR_MACADDR 0x84
-#define ERROR_RATES 0x85
-#define ERROR_ORDER 0x86
-#define ERROR_SCAN 0x87
-#define ERROR_AUTH 0x88
-#define ERROR_PSMODE 0x89
-#define ERROR_RTYPE 0x8A
-#define ERROR_DIVER 0x8B
-#define ERROR_SSID 0x8C
-#define ERROR_APLIST 0x8D
-#define ERROR_AUTOWAKE 0x8E
-#define ERROR_LEAP 0x8F
-
-/* Registers */
-#define COMMAND 0x00
-#define PARAM0 0x02
-#define PARAM1 0x04
-#define PARAM2 0x06
-#define STATUS 0x08
-#define RESP0 0x0a
-#define RESP1 0x0c
-#define RESP2 0x0e
-#define LINKSTAT 0x10
-#define SELECT0 0x18
-#define OFFSET0 0x1c
-#define RXFID 0x20
-#define TXALLOCFID 0x22
-#define TXCOMPLFID 0x24
-#define DATA0 0x36
-#define EVSTAT 0x30
-#define EVINTEN 0x32
-#define EVACK 0x34
-#define SWS0 0x28
-#define SWS1 0x2a
-#define SWS2 0x2c
-#define SWS3 0x2e
-#define AUXPAGE 0x3A
-#define AUXOFF 0x3C
-#define AUXDATA 0x3E
-
-#define FID_TX 1
-#define FID_RX 2
-/* Offset into aux memory for descriptors */
-#define AUX_OFFSET 0x800
-/* Size of allocated packets */
-#define PKTSIZE 1840
-#define RIDSIZE 2048
-/* Size of the transmit queue */
-#define MAXTXQ 64
-
-/* BAP selectors */
-#define BAP0 0 /* Used for receiving packets */
-#define BAP1 2 /* Used for xmiting packets and working with RIDS */
-
-/* Flags */
-#define COMMAND_BUSY 0x8000
-
-#define BAP_BUSY 0x8000
-#define BAP_ERR 0x4000
-#define BAP_DONE 0x2000
-
-#define PROMISC 0xffff
-#define NOPROMISC 0x0000
-
-#define EV_CMD 0x10
-#define EV_CLEARCOMMANDBUSY 0x4000
-#define EV_RX 0x01
-#define EV_TX 0x02
-#define EV_TXEXC 0x04
-#define EV_ALLOC 0x08
-#define EV_LINK 0x80
-#define EV_AWAKE 0x100
-#define EV_TXCPY 0x400
-#define EV_UNKNOWN 0x800
-#define EV_MIC 0x1000 /* Message Integrity Check Interrupt */
-#define EV_AWAKEN 0x2000
-#define STATUS_INTS (EV_AWAKE|EV_LINK|EV_TXEXC|EV_TX|EV_TXCPY|EV_RX|EV_MIC)
-
-#ifdef CHECK_UNKNOWN_INTS
-#define IGNORE_INTS (EV_CMD | EV_UNKNOWN)
-#else
-#define IGNORE_INTS (~STATUS_INTS)
-#endif
-
-/* RID TYPES */
-#define RID_RW 0x20
-
-/* The RIDs */
-#define RID_CAPABILITIES 0xFF00
-#define RID_APINFO     0xFF01
-#define RID_RADIOINFO  0xFF02
-#define RID_UNKNOWN3   0xFF03
-#define RID_RSSI       0xFF04
-#define RID_CONFIG     0xFF10
-#define RID_SSID       0xFF11
-#define RID_APLIST     0xFF12
-#define RID_DRVNAME    0xFF13
-#define RID_ETHERENCAP 0xFF14
-#define RID_WEP_TEMP   0xFF15
-#define RID_WEP_PERM   0xFF16
-#define RID_MODULATION 0xFF17
-#define RID_OPTIONS    0xFF18
-#define RID_ACTUALCONFIG 0xFF20 /*readonly*/
-#define RID_FACTORYCONFIG 0xFF21
-#define RID_UNKNOWN22  0xFF22
-#define RID_LEAPUSERNAME 0xFF23
-#define RID_LEAPPASSWORD 0xFF24
-#define RID_STATUS     0xFF50
-#define RID_BEACON_HST 0xFF51
-#define RID_BUSY_HST   0xFF52
-#define RID_RETRIES_HST 0xFF53
-#define RID_UNKNOWN54  0xFF54
-#define RID_UNKNOWN55  0xFF55
-#define RID_UNKNOWN56  0xFF56
-#define RID_MIC        0xFF57
-#define RID_STATS16    0xFF60
-#define RID_STATS16DELTA 0xFF61
-#define RID_STATS16DELTACLEAR 0xFF62
-#define RID_STATS      0xFF68
-#define RID_STATSDELTA 0xFF69
-#define RID_STATSDELTACLEAR 0xFF6A
-#define RID_ECHOTEST_RID 0xFF70
-#define RID_ECHOTEST_RESULTS 0xFF71
-#define RID_BSSLISTFIRST 0xFF72
-#define RID_BSSLISTNEXT  0xFF73
-#define RID_WPA_BSSLISTFIRST 0xFF74
-#define RID_WPA_BSSLISTNEXT  0xFF75
-
-typedef struct {
-	u16 cmd;
-	u16 parm0;
-	u16 parm1;
-	u16 parm2;
-} Cmd;
-
-typedef struct {
-	u16 status;
-	u16 rsp0;
-	u16 rsp1;
-	u16 rsp2;
-} Resp;
-
-/*
- * Rids and endian-ness:  The Rids will always be in cpu endian, since
- * this all the patches from the big-endian guys end up doing that.
- * so all rid access should use the read/writeXXXRid routines.
- */
-
-/* This structure came from an email sent to me from an engineer at
-   aironet for inclusion into this driver */
-typedef struct WepKeyRid WepKeyRid;
-struct WepKeyRid {
-	__le16 len;
-	__le16 kindex;
-	u8 mac[ETH_ALEN];
-	__le16 klen;
-	u8 key[16];
-} __packed;
-
-/* These structures are from the Aironet's PC4500 Developers Manual */
-typedef struct Ssid Ssid;
-struct Ssid {
-	__le16 len;
-	u8 ssid[32];
-} __packed;
-
-typedef struct SsidRid SsidRid;
-struct SsidRid {
-	__le16 len;
-	Ssid ssids[3];
-} __packed;
-
-typedef struct ModulationRid ModulationRid;
-struct ModulationRid {
-        __le16 len;
-        __le16 modulation;
-#define MOD_DEFAULT cpu_to_le16(0)
-#define MOD_CCK cpu_to_le16(1)
-#define MOD_MOK cpu_to_le16(2)
-} __packed;
-
-typedef struct ConfigRid ConfigRid;
-struct ConfigRid {
-	__le16 len; /* sizeof(ConfigRid) */
-	__le16 opmode; /* operating mode */
-#define MODE_STA_IBSS cpu_to_le16(0)
-#define MODE_STA_ESS cpu_to_le16(1)
-#define MODE_AP cpu_to_le16(2)
-#define MODE_AP_RPTR cpu_to_le16(3)
-#define MODE_CFG_MASK cpu_to_le16(0xff)
-#define MODE_ETHERNET_HOST cpu_to_le16(0<<8) /* rx payloads converted */
-#define MODE_LLC_HOST cpu_to_le16(1<<8) /* rx payloads left as is */
-#define MODE_AIRONET_EXTEND cpu_to_le16(1<<9) /* enable Aironet extensions */
-#define MODE_AP_INTERFACE cpu_to_le16(1<<10) /* enable ap interface extensions */
-#define MODE_ANTENNA_ALIGN cpu_to_le16(1<<11) /* enable antenna alignment */
-#define MODE_ETHER_LLC cpu_to_le16(1<<12) /* enable ethernet LLC */
-#define MODE_LEAF_NODE cpu_to_le16(1<<13) /* enable leaf node bridge */
-#define MODE_CF_POLLABLE cpu_to_le16(1<<14) /* enable CF pollable */
-#define MODE_MIC cpu_to_le16(1<<15) /* enable MIC */
-	__le16 rmode; /* receive mode */
-#define RXMODE_BC_MC_ADDR cpu_to_le16(0)
-#define RXMODE_BC_ADDR cpu_to_le16(1) /* ignore multicasts */
-#define RXMODE_ADDR cpu_to_le16(2) /* ignore multicast and broadcast */
-#define RXMODE_RFMON cpu_to_le16(3) /* wireless monitor mode */
-#define RXMODE_RFMON_ANYBSS cpu_to_le16(4)
-#define RXMODE_LANMON cpu_to_le16(5) /* lan style monitor -- data packets only */
-#define RXMODE_MASK cpu_to_le16(255)
-#define RXMODE_DISABLE_802_3_HEADER cpu_to_le16(1<<8) /* disables 802.3 header on rx */
-#define RXMODE_FULL_MASK (RXMODE_MASK | RXMODE_DISABLE_802_3_HEADER)
-#define RXMODE_NORMALIZED_RSSI cpu_to_le16(1<<9) /* return normalized RSSI */
-	__le16 fragThresh;
-	__le16 rtsThres;
-	u8 macAddr[ETH_ALEN];
-	u8 rates[8];
-	__le16 shortRetryLimit;
-	__le16 longRetryLimit;
-	__le16 txLifetime; /* in kusec */
-	__le16 rxLifetime; /* in kusec */
-	__le16 stationary;
-	__le16 ordering;
-	__le16 u16deviceType; /* for overriding device type */
-	__le16 cfpRate;
-	__le16 cfpDuration;
-	__le16 _reserved1[3];
-	/*---------- Scanning/Associating ----------*/
-	__le16 scanMode;
-#define SCANMODE_ACTIVE cpu_to_le16(0)
-#define SCANMODE_PASSIVE cpu_to_le16(1)
-#define SCANMODE_AIROSCAN cpu_to_le16(2)
-	__le16 probeDelay; /* in kusec */
-	__le16 probeEnergyTimeout; /* in kusec */
-        __le16 probeResponseTimeout;
-	__le16 beaconListenTimeout;
-	__le16 joinNetTimeout;
-	__le16 authTimeout;
-	__le16 authType;
-#define AUTH_OPEN cpu_to_le16(0x1)
-#define AUTH_ENCRYPT cpu_to_le16(0x101)
-#define AUTH_SHAREDKEY cpu_to_le16(0x102)
-#define AUTH_ALLOW_UNENCRYPTED cpu_to_le16(0x200)
-	__le16 associationTimeout;
-	__le16 specifiedApTimeout;
-	__le16 offlineScanInterval;
-	__le16 offlineScanDuration;
-	__le16 linkLossDelay;
-	__le16 maxBeaconLostTime;
-	__le16 refreshInterval;
-#define DISABLE_REFRESH cpu_to_le16(0xFFFF)
-	__le16 _reserved1a[1];
-	/*---------- Power save operation ----------*/
-	__le16 powerSaveMode;
-#define POWERSAVE_CAM cpu_to_le16(0)
-#define POWERSAVE_PSP cpu_to_le16(1)
-#define POWERSAVE_PSPCAM cpu_to_le16(2)
-	__le16 sleepForDtims;
-	__le16 listenInterval;
-	__le16 fastListenInterval;
-	__le16 listenDecay;
-	__le16 fastListenDelay;
-	__le16 _reserved2[2];
-	/*---------- Ap/Ibss config items ----------*/
-	__le16 beaconPeriod;
-	__le16 atimDuration;
-	__le16 hopPeriod;
-	__le16 channelSet;
-	__le16 channel;
-	__le16 dtimPeriod;
-	__le16 bridgeDistance;
-	__le16 radioID;
-	/*---------- Radio configuration ----------*/
-	__le16 radioType;
-#define RADIOTYPE_DEFAULT cpu_to_le16(0)
-#define RADIOTYPE_802_11 cpu_to_le16(1)
-#define RADIOTYPE_LEGACY cpu_to_le16(2)
-	u8 rxDiversity;
-	u8 txDiversity;
-	__le16 txPower;
-#define TXPOWER_DEFAULT 0
-	__le16 rssiThreshold;
-#define RSSI_DEFAULT 0
-        __le16 modulation;
-#define PREAMBLE_AUTO cpu_to_le16(0)
-#define PREAMBLE_LONG cpu_to_le16(1)
-#define PREAMBLE_SHORT cpu_to_le16(2)
-	__le16 preamble;
-	__le16 homeProduct;
-	__le16 radioSpecific;
-	/*---------- Aironet Extensions ----------*/
-	u8 nodeName[16];
-	__le16 arlThreshold;
-	__le16 arlDecay;
-	__le16 arlDelay;
-	__le16 _reserved4[1];
-	/*---------- Aironet Extensions ----------*/
-	u8 magicAction;
-#define MAGIC_ACTION_STSCHG 1
-#define MAGIC_ACTION_RESUME 2
-#define MAGIC_IGNORE_MCAST (1<<8)
-#define MAGIC_IGNORE_BCAST (1<<9)
-#define MAGIC_SWITCH_TO_PSP (0<<10)
-#define MAGIC_STAY_IN_CAM (1<<10)
-	u8 magicControl;
-	__le16 autoWake;
-} __packed;
-
-typedef struct StatusRid StatusRid;
-struct StatusRid {
-	__le16 len;
-	u8 mac[ETH_ALEN];
-	__le16 mode;
-	__le16 errorCode;
-	__le16 sigQuality;
-	__le16 SSIDlen;
-	char SSID[32];
-	char apName[16];
-	u8 bssid[4][ETH_ALEN];
-	__le16 beaconPeriod;
-	__le16 dimPeriod;
-	__le16 atimDuration;
-	__le16 hopPeriod;
-	__le16 channelSet;
-	__le16 channel;
-	__le16 hopsToBackbone;
-	__le16 apTotalLoad;
-	__le16 generatedLoad;
-	__le16 accumulatedArl;
-	__le16 signalQuality;
-	__le16 currentXmitRate;
-	__le16 apDevExtensions;
-	__le16 normalizedSignalStrength;
-	__le16 shortPreamble;
-	u8 apIP[4];
-	u8 noisePercent; /* Noise percent in last second */
-	u8 noisedBm; /* Noise dBm in last second */
-	u8 noiseAvePercent; /* Noise percent in last minute */
-	u8 noiseAvedBm; /* Noise dBm in last minute */
-	u8 noiseMaxPercent; /* Highest noise percent in last minute */
-	u8 noiseMaxdBm; /* Highest noise dbm in last minute */
-	__le16 load;
-	u8 carrier[4];
-	__le16 assocStatus;
-#define STAT_NOPACKETS 0
-#define STAT_NOCARRIERSET 10
-#define STAT_GOTCARRIERSET 11
-#define STAT_WRONGSSID 20
-#define STAT_BADCHANNEL 25
-#define STAT_BADBITRATES 30
-#define STAT_BADPRIVACY 35
-#define STAT_APFOUND 40
-#define STAT_APREJECTED 50
-#define STAT_AUTHENTICATING 60
-#define STAT_DEAUTHENTICATED 61
-#define STAT_AUTHTIMEOUT 62
-#define STAT_ASSOCIATING 70
-#define STAT_DEASSOCIATED 71
-#define STAT_ASSOCTIMEOUT 72
-#define STAT_NOTAIROAP 73
-#define STAT_ASSOCIATED 80
-#define STAT_LEAPING 90
-#define STAT_LEAPFAILED 91
-#define STAT_LEAPTIMEDOUT 92
-#define STAT_LEAPCOMPLETE 93
-} __packed;
-
-typedef struct StatsRid StatsRid;
-struct StatsRid {
-	__le16 len;
-	__le16 spacer;
-	__le32 vals[100];
-} __packed;
-
-typedef struct APListRid APListRid;
-struct APListRid {
-	__le16 len;
-	u8 ap[4][ETH_ALEN];
-} __packed;
-
-typedef struct CapabilityRid CapabilityRid;
-struct CapabilityRid {
-	__le16 len;
-	char oui[3];
-	char zero;
-	__le16 prodNum;
-	char manName[32];
-	char prodName[16];
-	char prodVer[8];
-	char factoryAddr[ETH_ALEN];
-	char aironetAddr[ETH_ALEN];
-	__le16 radioType;
-	__le16 country;
-	char callid[ETH_ALEN];
-	char supportedRates[8];
-	char rxDiversity;
-	char txDiversity;
-	__le16 txPowerLevels[8];
-	__le16 hardVer;
-	__le16 hardCap;
-	__le16 tempRange;
-	__le16 softVer;
-	__le16 softSubVer;
-	__le16 interfaceVer;
-	__le16 softCap;
-	__le16 bootBlockVer;
-	__le16 requiredHard;
-	__le16 extSoftCap;
-} __packed;
-
-/* Only present on firmware >= 5.30.17 */
-typedef struct BSSListRidExtra BSSListRidExtra;
-struct BSSListRidExtra {
-  __le16 unknown[4];
-  u8 fixed[12]; /* WLAN management frame */
-  u8 iep[624];
-} __packed;
-
-typedef struct BSSListRid BSSListRid;
-struct BSSListRid {
-  __le16 len;
-  __le16 index; /* First is 0 and 0xffff means end of list */
-#define RADIO_FH 1 /* Frequency hopping radio type */
-#define RADIO_DS 2 /* Direct sequence radio type */
-#define RADIO_TMA 4 /* Proprietary radio used in old cards (2500) */
-  __le16 radioType;
-  u8 bssid[ETH_ALEN]; /* Mac address of the BSS */
-  u8 zero;
-  u8 ssidLen;
-  u8 ssid[32];
-  __le16 dBm;
-#define CAP_ESS cpu_to_le16(1<<0)
-#define CAP_IBSS cpu_to_le16(1<<1)
-#define CAP_PRIVACY cpu_to_le16(1<<4)
-#define CAP_SHORTHDR cpu_to_le16(1<<5)
-  __le16 cap;
-  __le16 beaconInterval;
-  u8 rates[8]; /* Same as rates for config rid */
-  struct { /* For frequency hopping only */
-    __le16 dwell;
-    u8 hopSet;
-    u8 hopPattern;
-    u8 hopIndex;
-    u8 fill;
-  } fh;
-  __le16 dsChannel;
-  __le16 atimWindow;
-
-  /* Only present on firmware >= 5.30.17 */
-  BSSListRidExtra extra;
-} __packed;
-
-typedef struct {
-  BSSListRid bss;
-  struct list_head list;
-} BSSListElement;
-
-typedef struct tdsRssiEntry tdsRssiEntry;
-struct tdsRssiEntry {
-  u8 rssipct;
-  u8 rssidBm;
-} __packed;
-
-typedef struct tdsRssiRid tdsRssiRid;
-struct tdsRssiRid {
-  u16 len;
-  tdsRssiEntry x[256];
-} __packed;
-
-typedef struct MICRid MICRid;
-struct MICRid {
-	__le16 len;
-	__le16 state;
-	__le16 multicastValid;
-	u8  multicast[16];
-	__le16 unicastValid;
-	u8  unicast[16];
-} __packed;
-
-typedef struct MICBuffer MICBuffer;
-struct MICBuffer {
-	__be16 typelen;
-
-	union {
-	    u8 snap[8];
-	    struct {
-		u8 dsap;
-		u8 ssap;
-		u8 control;
-		u8 orgcode[3];
-		u8 fieldtype[2];
-	    } llc;
-	} u;
-	__be32 mic;
-	__be32 seq;
-} __packed;
-
-typedef struct {
-	u8 da[ETH_ALEN];
-	u8 sa[ETH_ALEN];
-} etherHead;
-
-#define TXCTL_TXOK (1<<1) /* report if tx is ok */
-#define TXCTL_TXEX (1<<2) /* report if tx fails */
-#define TXCTL_802_3 (0<<3) /* 802.3 packet */
-#define TXCTL_802_11 (1<<3) /* 802.11 mac packet */
-#define TXCTL_ETHERNET (0<<4) /* payload has ethertype */
-#define TXCTL_LLC (1<<4) /* payload is llc */
-#define TXCTL_RELEASE (0<<5) /* release after completion */
-#define TXCTL_NORELEASE (1<<5) /* on completion returns to host */
-
-#define BUSY_FID 0x10000
-
-#ifdef CISCO_EXT
-#define AIROMAGIC	0xa55a
-/* Warning : SIOCDEVPRIVATE may disapear during 2.5.X - Jean II */
-#ifdef SIOCIWFIRSTPRIV
-#ifdef SIOCDEVPRIVATE
-#define AIROOLDIOCTL	SIOCDEVPRIVATE
-#define AIROOLDIDIFC 	AIROOLDIOCTL + 1
-#endif /* SIOCDEVPRIVATE */
-#else /* SIOCIWFIRSTPRIV */
-#define SIOCIWFIRSTPRIV SIOCDEVPRIVATE
-#endif /* SIOCIWFIRSTPRIV */
-/* This may be wrong. When using the new SIOCIWFIRSTPRIV range, we probably
- * should use only "GET" ioctls (last bit set to 1). "SET" ioctls are root
- * only and don't return the modified struct ifreq to the application which
- * is usually a problem. - Jean II */
-#define AIROIOCTL	SIOCIWFIRSTPRIV
-#define AIROIDIFC 	AIROIOCTL + 1
-
-/* Ioctl constants to be used in airo_ioctl.command */
-
-#define	AIROGCAP  		0	// Capability rid
-#define AIROGCFG		1       // USED A LOT
-#define AIROGSLIST		2	// System ID list
-#define AIROGVLIST		3       // List of specified AP's
-#define AIROGDRVNAM		4	//  NOTUSED
-#define AIROGEHTENC		5	// NOTUSED
-#define AIROGWEPKTMP		6
-#define AIROGWEPKNV		7
-#define AIROGSTAT		8
-#define AIROGSTATSC32		9
-#define AIROGSTATSD32		10
-#define AIROGMICRID		11
-#define AIROGMICSTATS		12
-#define AIROGFLAGS		13
-#define AIROGID			14
-#define AIRORRID		15
-#define AIRORSWVERSION		17
-
-/* Leave gap of 40 commands after AIROGSTATSD32 for future */
-
-#define AIROPCAP               	AIROGSTATSD32 + 40
-#define AIROPVLIST              AIROPCAP      + 1
-#define AIROPSLIST		AIROPVLIST    + 1
-#define AIROPCFG		AIROPSLIST    + 1
-#define AIROPSIDS		AIROPCFG      + 1
-#define AIROPAPLIST		AIROPSIDS     + 1
-#define AIROPMACON		AIROPAPLIST   + 1	/* Enable mac  */
-#define AIROPMACOFF		AIROPMACON    + 1 	/* Disable mac */
-#define AIROPSTCLR		AIROPMACOFF   + 1
-#define AIROPWEPKEY		AIROPSTCLR    + 1
-#define AIROPWEPKEYNV		AIROPWEPKEY   + 1
-#define AIROPLEAPPWD            AIROPWEPKEYNV + 1
-#define AIROPLEAPUSR            AIROPLEAPPWD  + 1
-
-/* Flash codes */
-
-#define AIROFLSHRST	       AIROPWEPKEYNV  + 40
-#define AIROFLSHGCHR           AIROFLSHRST    + 1
-#define AIROFLSHSTFL           AIROFLSHGCHR   + 1
-#define AIROFLSHPCHR           AIROFLSHSTFL   + 1
-#define AIROFLPUTBUF           AIROFLSHPCHR   + 1
-#define AIRORESTART            AIROFLPUTBUF   + 1
-
-#define FLASHSIZE	32768
-#define AUXMEMSIZE	(256 * 1024)
-
-typedef struct aironet_ioctl {
-	unsigned short command;		// What to do
-	unsigned short len;		// Len of data
-	unsigned short ridnum;		// rid number
-	unsigned char __user *data;	// d-data
-} aironet_ioctl;
-
-static const char swversion[] =