Merge tag 'wireless-drivers-next-for-davem-2017-11-11' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for 4.15

Last minute patches before the merge window. Not really anything
special standing out, mostly fixes or cleanup and some minor new
features.

Major changes:

iwlwifi

* some new PCI IDs
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

66 files changed, 995 insertions, 904 deletions

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
index 163ddc49f951..0b76a615708e 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
@@ -71,6 +71,7 @@ struct brcmf_bus_dcmd {
  * @wowl_config: specify if dongle is configured for wowl when going to suspend
  * @get_ramsize: obtain size of device memory.
  * @get_memdump: obtain device memory dump in provided buffer.
+ * @get_fwname: obtain firmware name.
  *
  * This structure provides an abstract interface towards the
  * bus specific driver. For control messages to common driver
@@ -87,6 +88,8 @@ struct brcmf_bus_ops {
 	void (*wowl_config)(struct device *dev, bool enabled);
 	size_t (*get_ramsize)(struct device *dev);
 	int (*get_memdump)(struct device *dev, void *data, size_t len);
+	int (*get_fwname)(struct device *dev, uint chip, uint chiprev,
+			  unsigned char *fw_name);
 };
 
 
@@ -224,6 +227,13 @@ int brcmf_bus_get_memdump(struct brcmf_bus *bus, void *data, size_t len)
 	return bus->ops->get_memdump(bus->dev, data, len);
 }
 
+static inline
+int brcmf_bus_get_fwname(struct brcmf_bus *bus, uint chip, uint chiprev,
+			 unsigned char *fw_name)
+{
+	return bus->ops->get_fwname(bus->dev, chip, chiprev, fw_name);
+}
+
 /*
  * interface functions from common layer
  */
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index 4bfd43a80273..6e70df978159 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -472,47 +472,6 @@ send_key_to_dongle(struct brcmf_if *ifp, struct brcmf_wsec_key *key)
 	return err;
 }
 
-static s32
-brcmf_configure_arp_nd_offload(struct brcmf_if *ifp, bool enable)
-{
-	s32 err;
-	u32 mode;
-
-	if (enable)
-		mode = BRCMF_ARP_OL_AGENT | BRCMF_ARP_OL_PEER_AUTO_REPLY;
-	else
-		mode = 0;
-
-	/* Try to set and enable ARP offload feature, this may fail, then it  */
-	/* is simply not supported and err 0 will be returned                 */
-	err = brcmf_fil_iovar_int_set(ifp, "arp_ol", mode);
-	if (err) {
-		brcmf_dbg(TRACE, "failed to set ARP offload mode to 0x%x, err = %d\n",
-			  mode, err);
-		err = 0;
-	} else {
-		err = brcmf_fil_iovar_int_set(ifp, "arpoe", enable);
-		if (err) {
-			brcmf_dbg(TRACE, "failed to configure (%d) ARP offload err = %d\n",
-				  enable, err);
-			err = 0;
-		} else
-			brcmf_dbg(TRACE, "successfully configured (%d) ARP offload to 0x%x\n",
-				  enable, mode);
-	}
-
-	err = brcmf_fil_iovar_int_set(ifp, "ndoe", enable);
-	if (err) {
-		brcmf_dbg(TRACE, "failed to configure (%d) ND offload err = %d\n",
-			  enable, err);
-		err = 0;
-	} else
-		brcmf_dbg(TRACE, "successfully configured (%d) ND offload to 0x%x\n",
-			  enable, mode);
-
-	return err;
-}
-
 static void
 brcmf_cfg80211_update_proto_addr_mode(struct wireless_dev *wdev)
 {
@@ -1084,7 +1043,6 @@ brcmf_do_escan(struct brcmf_if *ifp, struct cfg80211_scan_request *request)
 {
 	struct brcmf_cfg80211_info *cfg = ifp->drvr->config;
 	s32 err;
-	u32 passive_scan;
 	struct brcmf_scan_results *results;
 	struct escan_info *escan = &cfg->escan_info;
 
@@ -1092,13 +1050,7 @@ brcmf_do_escan(struct brcmf_if *ifp, struct cfg80211_scan_request *request)
 	escan->ifp = ifp;
 	escan->wiphy = cfg->wiphy;
 	escan->escan_state = WL_ESCAN_STATE_SCANNING;
-	passive_scan = cfg->active_scan ? 0 : 1;
-	err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PASSIVE_SCAN,
-				    passive_scan);
-	if (err) {
-		brcmf_err("error (%d)\n", err);
-		return err;
-	}
+
 	brcmf_scan_config_mpc(ifp, 0);
 	results = (struct brcmf_scan_results *)cfg->escan_info.escan_buf;
 	results->version = 0;
@@ -1112,21 +1064,16 @@ brcmf_do_escan(struct brcmf_if *ifp, struct cfg80211_scan_request *request)
 }
 
 static s32
-brcmf_cfg80211_escan(struct wiphy *wiphy, struct brcmf_cfg80211_vif *vif,
-		     struct cfg80211_scan_request *request,
-		     struct cfg80211_ssid *this_ssid)
+brcmf_cfg80211_scan(struct wiphy *wiphy, struct cfg80211_scan_request *request)
 {
-	struct brcmf_if *ifp = vif->ifp;
 	struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
-	struct cfg80211_ssid *ssids;
-	u32 passive_scan;
-	bool escan_req;
-	bool spec_scan;
-	s32 err;
-	struct brcmf_ssid_le ssid_le;
-	u32 SSID_len;
+	struct brcmf_cfg80211_vif *vif;
+	s32 err = 0;
 
-	brcmf_dbg(SCAN, "START ESCAN\n");
+	brcmf_dbg(TRACE, "Enter\n");
+	vif = container_of(request->wdev, struct brcmf_cfg80211_vif, wdev);
+	if (!check_vif_up(vif))
+		return -EIO;
 
 	if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) {
 		brcmf_err("Scanning already: status (%lu)\n", cfg->scan_status);
@@ -1142,8 +1089,8 @@ brcmf_cfg80211_escan(struct wiphy *wiphy, struct brcmf_cfg80211_vif *vif,
 			  cfg->scan_status);
 		return -EAGAIN;
 	}
-	if (test_bit(BRCMF_VIF_STATUS_CONNECTING, &ifp->vif->sme_state)) {
-		brcmf_err("Connecting: status (%lu)\n", ifp->vif->sme_state);
+	if (test_bit(BRCMF_VIF_STATUS_CONNECTING, &vif->sme_state)) {
+		brcmf_err("Connecting: status (%lu)\n", vif->sme_state);
 		return -EAGAIN;
 	}
 
@@ -1151,96 +1098,38 @@ brcmf_cfg80211_escan(struct wiphy *wiphy, struct brcmf_cfg80211_vif *vif,
 	if (vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif)
 		vif = cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif;
 
-	escan_req = false;
-	if (request) {
-		/* scan bss */
-		ssids = request->ssids;
-		escan_req = true;
-	} else {
-		/* scan in ibss */
-		/* we don't do escan in ibss */
-		ssids = this_ssid;
-	}
+	brcmf_dbg(SCAN, "START ESCAN\n");
 
 	cfg->scan_request = request;
 	set_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status);
-	if (escan_req) {
-		cfg->escan_info.run = brcmf_run_escan;
-		err = brcmf_p2p_scan_prep(wiphy, request, vif);
-		if (err)
-			goto scan_out;
 
-		err = brcmf_do_escan(vif->ifp, request);
-		if (err)
-			goto scan_out;
-	} else {
-		brcmf_dbg(SCAN, "ssid \"%s\", ssid_len (%d)\n",
-			  ssids->ssid, ssids->ssid_len);
-		memset(&ssid_le, 0, sizeof(ssid_le));
-		SSID_len = min_t(u8, sizeof(ssid_le.SSID), ssids->ssid_len);
-		ssid_le.SSID_len = cpu_to_le32(0);
-		spec_scan = false;
-		if (SSID_len) {
-			memcpy(ssid_le.SSID, ssids->ssid, SSID_len);
-			ssid_le.SSID_len = cpu_to_le32(SSID_len);
-			spec_scan = true;
-		} else
-			brcmf_dbg(SCAN, "Broadcast scan\n");
+	cfg->escan_info.run = brcmf_run_escan;
+	err = brcmf_p2p_scan_prep(wiphy, request, vif);
+	if (err)
+		goto scan_out;
 
-		passive_scan = cfg->active_scan ? 0 : 1;
-		err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PASSIVE_SCAN,
-					    passive_scan);
-		if (err) {
-			brcmf_err("WLC_SET_PASSIVE_SCAN error (%d)\n", err);
-			goto scan_out;
-		}
-		brcmf_scan_config_mpc(ifp, 0);
-		err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SCAN, &ssid_le,
-					     sizeof(ssid_le));
-		if (err) {
-			if (err == -EBUSY)
-				brcmf_dbg(INFO, "BUSY: scan for \"%s\" canceled\n",
-					  ssid_le.SSID);
-			else
-				brcmf_err("WLC_SCAN error (%d)\n", err);
+	err = brcmf_vif_set_mgmt_ie(vif, BRCMF_VNDR_IE_PRBREQ_FLAG,
+				    request->ie, request->ie_len);
+	if (err)
+		goto scan_out;
 
-			brcmf_scan_config_mpc(ifp, 1);
-			goto scan_out;
-		}
-	}
+	err = brcmf_do_escan(vif->ifp, request);
+	if (err)
+		goto scan_out;
 
 	/* Arm scan timeout timer */
-	mod_timer(&cfg->escan_timeout, jiffies +
-			BRCMF_ESCAN_TIMER_INTERVAL_MS * HZ / 1000);
+	mod_timer(&cfg->escan_timeout,
+		  jiffies + msecs_to_jiffies(BRCMF_ESCAN_TIMER_INTERVAL_MS));
 
 	return 0;
 
 scan_out:
+	brcmf_err("scan error (%d)\n", err);
 	clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status);
 	cfg->scan_request = NULL;
 	return err;
 }
 
-static s32
-brcmf_cfg80211_scan(struct wiphy *wiphy, struct cfg80211_scan_request *request)
-{
-	struct brcmf_cfg80211_vif *vif;
-	s32 err = 0;
-
-	brcmf_dbg(TRACE, "Enter\n");
-	vif = container_of(request->wdev, struct brcmf_cfg80211_vif, wdev);
-	if (!check_vif_up(vif))
-		return -EIO;
-
-	err = brcmf_cfg80211_escan(wiphy, vif, request, NULL);
-
-	if (err)
-		brcmf_err("scan error (%d)\n", err);
-
-	brcmf_dbg(TRACE, "Exit\n");
-	return err;
-}
-
 static s32 brcmf_set_rts(struct net_device *ndev, u32 rts_threshold)
 {
 	s32 err = 0;
@@ -5876,7 +5765,6 @@ static s32 wl_init_priv(struct brcmf_cfg80211_info *cfg)
 
 	cfg->scan_request = NULL;
 	cfg->pwr_save = true;
-	cfg->active_scan = true;	/* we do active scan per default */
 	cfg->dongle_up = false;		/* dongle is not up yet */
 	err = brcmf_init_priv_mem(cfg);
 	if (err)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
index 7b2835e5e434..b5b5f0f10b63 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
@@ -283,7 +283,6 @@ struct brcmf_cfg80211_wowl {
  * @scan_status: scan activity on the dongle.
  * @pub: common driver information.
  * @channel: current channel.
- * @active_scan: current scan mode.
  * @int_escan_map: bucket map for which internal e-scan is done.
  * @ibss_starter: indicates this sta is ibss starter.
  * @pwr_save: indicate whether dongle to support power save mode.
@@ -316,7 +315,6 @@ struct brcmf_cfg80211_info {
 	unsigned long scan_status;
 	struct brcmf_pub *pub;
 	u32 channel;
-	bool active_scan;
 	u32 int_escan_map;
 	bool ibss_starter;
 	bool pwr_save;
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
index 7a2b49587b4d..6a59d0609d30 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
@@ -18,6 +18,7 @@
 #include <linux/string.h>
 #include <linux/netdevice.h>
 #include <linux/module.h>
+#include <linux/firmware.h>
 #include <brcmu_wifi.h>
 #include <brcmu_utils.h>
 #include "core.h"
@@ -28,6 +29,7 @@
 #include "tracepoint.h"
 #include "common.h"
 #include "of.h"
+#include "firmware.h"
 
 MODULE_AUTHOR("Broadcom Corporation");
 MODULE_DESCRIPTION("Broadcom 802.11 wireless LAN fullmac driver.");
@@ -104,12 +106,140 @@ void brcmf_c_set_joinpref_default(struct brcmf_if *ifp)
 		brcmf_err("Set join_pref error (%d)\n", err);
 }
 
+static int brcmf_c_download(struct brcmf_if *ifp, u16 flag,
+			    struct brcmf_dload_data_le *dload_buf,
+			    u32 len)
+{
+	s32 err;
+
+	flag |= (DLOAD_HANDLER_VER << DLOAD_FLAG_VER_SHIFT);
+	dload_buf->flag = cpu_to_le16(flag);
+	dload_buf->dload_type = cpu_to_le16(DL_TYPE_CLM);
+	dload_buf->len = cpu_to_le32(len);
+	dload_buf->crc = cpu_to_le32(0);
+	len = sizeof(*dload_buf) + len - 1;
+
+	err = brcmf_fil_iovar_data_set(ifp, "clmload", dload_buf, len);
+
+	return err;
+}
+
+static int brcmf_c_get_clm_name(struct brcmf_if *ifp, u8 *clm_name)
+{
+	struct brcmf_bus *bus = ifp->drvr->bus_if;
+	struct brcmf_rev_info *ri = &ifp->drvr->revinfo;
+	u8 fw_name[BRCMF_FW_NAME_LEN];
+	u8 *ptr;
+	size_t len;
+	s32 err;
+
+	memset(fw_name, 0, BRCMF_FW_NAME_LEN);
+	err = brcmf_bus_get_fwname(bus, ri->chipnum, ri->chiprev, fw_name);
+	if (err) {
+		brcmf_err("get firmware name failed (%d)\n", err);
+		goto done;
+	}
+
+	/* generate CLM blob file name */
+	ptr = strrchr(fw_name, '.');
+	if (!ptr) {
+		err = -ENOENT;
+		goto done;
+	}
+
+	len = ptr - fw_name + 1;
+	if (len + strlen(".clm_blob") > BRCMF_FW_NAME_LEN) {
+		err = -E2BIG;
+	} else {
+		strlcpy(clm_name, fw_name, len);
+		strlcat(clm_name, ".clm_blob", BRCMF_FW_NAME_LEN);
+	}
+done:
+	return err;
+}
+
+static int brcmf_c_process_clm_blob(struct brcmf_if *ifp)
+{
+	struct device *dev = ifp->drvr->bus_if->dev;
+	struct brcmf_dload_data_le *chunk_buf;
+	const struct firmware *clm = NULL;
+	u8 clm_name[BRCMF_FW_NAME_LEN];
+	u32 chunk_len;
+	u32 datalen;
+	u32 cumulative_len;
+	u16 dl_flag = DL_BEGIN;
+	u32 status;
+	s32 err;
+
+	brcmf_dbg(TRACE, "Enter\n");
+
+	memset(clm_name, 0, BRCMF_FW_NAME_LEN);
+	err = brcmf_c_get_clm_name(ifp, clm_name);
+	if (err) {
+		brcmf_err("get CLM blob file name failed (%d)\n", err);
+		return err;
+	}
+
+	err = request_firmware(&clm, clm_name, dev);
+	if (err) {
+		if (err == -ENOENT) {
+			brcmf_dbg(INFO, "continue with CLM data currently present in firmware\n");
+			return 0;
+		}
+		brcmf_err("request CLM blob file failed (%d)\n", err);
+		return err;
+	}
+
+	chunk_buf = kzalloc(sizeof(*chunk_buf) + MAX_CHUNK_LEN - 1, GFP_KERNEL);
+	if (!chunk_buf) {
+		err = -ENOMEM;
+		goto done;
+	}
+
+	datalen = clm->size;
+	cumulative_len = 0;
+	do {
+		if (datalen > MAX_CHUNK_LEN) {
+			chunk_len = MAX_CHUNK_LEN;
+		} else {
+			chunk_len = datalen;
+			dl_flag |= DL_END;
+		}
+		memcpy(chunk_buf->data, clm->data + cumulative_len, chunk_len);
+
+		err = brcmf_c_download(ifp, dl_flag, chunk_buf, chunk_len);
+
+		dl_flag &= ~DL_BEGIN;
+
+		cumulative_len += chunk_len;
+		datalen -= chunk_len;
+	} while ((datalen > 0) && (err == 0));
+
+	if (err) {
+		brcmf_err("clmload (%zu byte file) failed (%d); ",
+			  clm->size, err);
+		/* Retrieve clmload_status and print */
+		err = brcmf_fil_iovar_int_get(ifp, "clmload_status", &status);
+		if (err)
+			brcmf_err("get clmload_status failed (%d)\n", err);
+		else
+			brcmf_dbg(INFO, "clmload_status=%d\n", status);
+		err = -EIO;
+	}
+
+	kfree(chunk_buf);
+done:
+	release_firmware(clm);
+	return err;
+}
+
 int brcmf_c_preinit_dcmds(struct brcmf_if *ifp)
 {
 	s8 eventmask[BRCMF_EVENTING_MASK_LEN];
 	u8 buf[BRCMF_DCMD_SMLEN];
 	struct brcmf_rev_info_le revinfo;
 	struct brcmf_rev_info *ri;
+	char *clmver;
 	char *ptr;
 	s32 err;
 
@@ -148,6 +278,13 @@ int brcmf_c_preinit_dcmds(struct brcmf_if *ifp)
 	}
 	ri->result = err;
 
+	/* Do any CLM downloading */
+	err = brcmf_c_process_clm_blob(ifp);
+	if (err < 0) {