Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Revert iwlwifi reclaimed packet tracking, it causes problems for a
    bunch of folks.  From Emmanuel Grumbach.

 2) Work limiting code in brcmsmac wifi driver can clear tx status
    without processing the event.  From Arend van Spriel.

 3) rtlwifi USB driver processes wrong SKB, fix from Larry Finger.

 4) l2tp tunnel delete can race with close, fix from Tom Parkin.

 5) pktgen_add_device() failures are not checked at all, fix from Cong
    Wang.

 6) Fix unintentional removal of carrier off from tun_detach(),
    otherwise we confuse userspace, from Michael S.  Tsirkin.

 7) Don't leak socket reference counts and ubufs in vhost-net driver,
    from Jason Wang.

 8) vmxnet3 driver gets it's initial carrier state wrong, fix from Neil
    Horman.

 9) Protect against USB networking devices which spam the host with 0
    length frames, from Bjørn Mork.

10) Prevent neighbour overflows in ipv6 for locally destined routes,
    from Marcelo Ricardo.  This is the best short-term fix for this, a
    longer term fix has been implemented in net-next.

11) L2TP uses ipv4 datagram routines in it's ipv6 code, whoops.  This
    mistake is largely because the ipv6 functions don't even have some
    kind of prefix in their names to suggest they are ipv6 specific.
    From Tom Parkin.

12) Check SYN packet drops properly in tcp_rcv_fastopen_synack(), from
    Yuchung Cheng.

13) Fix races and TX skb freeing bugs in via-rhine's NAPI support, from
    Francois Romieu and your's truly.

14) Fix infinite loops and divides by zero in TCP congestion window
    handling, from Eric Dumazet, Neal Cardwell, and Ilpo Järvinen.

15) AF_PACKET tx ring handling can leak kernel memory to userspace, fix
    from Phil Sutter.

16) Fix error handling in ipv6 GRE tunnel transmit, from Tommi Rantala.

17) Protect XEN netback driver against hostile frontend putting garbage
    into the rings, don't leak pages in TX GOP checking, and add proper
    resource releasing in error path of xen_netbk_get_requests().  From
    Ian Campbell.

18) SCTP authentication keys should be cleared out and released with
    kzfree(), from Daniel Borkmann.

19) L2TP is a bit too clever trying to maintain skb->truesize, and ends
    up corrupting socket memory accounting to the point where packet
    sending is halted indefinitely.  Just remove the adjustments
    entirely, they aren't really needed.  From Eric Dumazet.

20) ATM Iphase driver uses a data type with the same name as the S390
    headers, rename to fix the build.  From Heiko Carstens.

21) Fix a typo in copying the inner network header offset from one SKB
    to another, from Pravin B Shelar.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (56 commits)
  net: sctp: sctp_endpoint_free: zero out secret key data
  net: sctp: sctp_setsockopt_auth_key: use kzfree instead of kfree
  atm/iphase: rename fregt_t -> ffreg_t
  net: usb: fix regression from FLAG_NOARP code
  l2tp: dont play with skb->truesize
  net: sctp: sctp_auth_key_put: use kzfree instead of kfree
  netback: correct netbk_tx_err to handle wrap around.
  xen/netback: free already allocated memory on failure in xen_netbk_get_requests
  xen/netback: don't leak pages on failure in xen_netbk_tx_check_gop.
  xen/netback: shutdown the ring if it contains garbage.
  net: qmi_wwan: add more Huawei devices, including E320
  net: cdc_ncm: add another Huawei vendor specific device
  ipv6/ip6_gre: fix error case handling in ip6gre_tunnel_xmit()
  tcp: fix for zero packets_in_flight was too broad
  brcmsmac: rework of mac80211 .flush() callback operation
  ssb: unregister gpios before unloading ssb
  bcma: unregister gpios before unloading bcma
  rtlwifi: Fix scheduling while atomic bug
  net: usbnet: fix tx_dropped statistics
  tcp: ipv6: Update MIB counters for drops
  ...

68 files changed, 649 insertions, 348 deletions

diff --git a/drivers/atm/iphase.h b/drivers/atm/iphase.h
index 6a0955e6d4fc..53ecac5a2161 100644
--- a/drivers/atm/iphase.h
+++ b/drivers/atm/iphase.h
@@ -636,82 +636,82 @@ struct rx_buf_desc {
 #define SEG_BASE IPHASE5575_FRAG_CONTROL_REG_BASE  
 #define REASS_BASE IPHASE5575_REASS_CONTROL_REG_BASE  
 
-typedef volatile u_int  freg_t;
+typedef volatile u_int	ffreg_t;
 typedef u_int   rreg_t;
 
 typedef struct _ffredn_t {
-        freg_t  idlehead_high;  /* Idle cell header (high)              */
-        freg_t  idlehead_low;   /* Idle cell header (low)               */
-        freg_t  maxrate;        /* Maximum rate                         */
-        freg_t  stparms;        /* Traffic Management Parameters        */
-        freg_t  abrubr_abr;     /* ABRUBR Priority Byte 1, TCR Byte 0   */
-        freg_t  rm_type;        /*                                      */
-        u_int   filler5[0x17 - 0x06];
-        freg_t  cmd_reg;        /* Command register                     */
-        u_int   filler18[0x20 - 0x18];
-        freg_t  cbr_base;       /* CBR Pointer Base                     */
-        freg_t  vbr_base;       /* VBR Pointer Base                     */
-        freg_t  abr_base;       /* ABR Pointer Base                     */
-        freg_t  ubr_base;       /* UBR Pointer Base                     */
-        u_int   filler24;
-        freg_t  vbrwq_base;     /* VBR Wait Queue Base                  */
-        freg_t  abrwq_base;     /* ABR Wait Queue Base                  */
-        freg_t  ubrwq_base;     /* UBR Wait Queue Base                  */
-        freg_t  vct_base;       /* Main VC Table Base                   */
-        freg_t  vcte_base;      /* Extended Main VC Table Base          */
-        u_int   filler2a[0x2C - 0x2A];
-        freg_t  cbr_tab_beg;    /* CBR Table Begin                      */
-        freg_t  cbr_tab_end;    /* CBR Table End                        */
-        freg_t  cbr_pointer;    /* CBR Pointer                          */
-        u_int   filler2f[0x30 - 0x2F];
-        freg_t  prq_st_adr;     /* Packet Ready Queue Start Address     */
-        freg_t  prq_ed_adr;     /* Packet Ready Queue End Address       */
-        freg_t  prq_rd_ptr;     /* Packet Ready Queue read pointer      */
-        freg_t  prq_wr_ptr;     /* Packet Ready Queue write pointer     */
-        freg_t  tcq_st_adr;     /* Transmit Complete Queue Start Address*/
-        freg_t  tcq_ed_adr;     /* Transmit Complete Queue End Address  */
-        freg_t  tcq_rd_ptr;     /* Transmit Complete Queue read pointer */
-        freg_t  tcq_wr_ptr;     /* Transmit Complete Queue write pointer*/
-        u_int   filler38[0x40 - 0x38];
-        freg_t  queue_base;     /* Base address for PRQ and TCQ         */
-        freg_t  desc_base;      /* Base address of descriptor table     */
-        u_int   filler42[0x45 - 0x42];
-        freg_t  mode_reg_0;     /* Mode register 0                      */
-        freg_t  mode_reg_1;     /* Mode register 1                      */
-        freg_t  intr_status_reg;/* Interrupt Status register            */
-        freg_t  mask_reg;       /* Mask Register                        */
-        freg_t  cell_ctr_high1; /* Total cell transfer count (high)     */
-        freg_t  cell_ctr_lo1;   /* Total cell transfer count (low)      */
-        freg_t  state_reg;      /* Status register                      */
-        u_int   filler4c[0x58 - 0x4c];
-        freg_t  curr_desc_num;  /* Contains the current descriptor num  */
-        freg_t  next_desc;      /* Next descriptor                      */
-        freg_t  next_vc;        /* Next VC                              */
-        u_int   filler5b[0x5d - 0x5b];
-        freg_t  present_slot_cnt;/* Present slot count                  */
-        u_int   filler5e[0x6a - 0x5e];
-        freg_t  new_desc_num;   /* New descriptor number                */
-        freg_t  new_vc;         /* New VC                               */
-        freg_t  sched_tbl_ptr;  /* Schedule table pointer               */
-        freg_t  vbrwq_wptr;     /* VBR wait queue write pointer         */
-        freg_t  vbrwq_rptr;     /* VBR wait queue read pointer          */
-        freg_t  abrwq_wptr;     /* ABR wait queue write pointer         */
-        freg_t  abrwq_rptr;     /* ABR wait queue read pointer          */
-        freg_t  ubrwq_wptr;     /* UBR wait queue write pointer         */
-        freg_t  ubrwq_rptr;     /* UBR wait queue read pointer          */
-        freg_t  cbr_vc;         /* CBR VC                               */
-        freg_t  vbr_sb_vc;      /* VBR SB VC                            */
-        freg_t  abr_sb_vc;      /* ABR SB VC                            */
-        freg_t  ubr_sb_vc;      /* UBR SB VC                            */
-        freg_t  vbr_next_link;  /* VBR next link                        */
-        freg_t  abr_next_link;  /* ABR next link                        */
-        freg_t  ubr_next_link;  /* UBR next link                        */
-        u_int   filler7a[0x7c-0x7a];
-        freg_t  out_rate_head;  /* Out of rate head                     */
-        u_int   filler7d[0xca-0x7d]; /* pad out to full address space   */
-        freg_t  cell_ctr_high1_nc;/* Total cell transfer count (high)   */
-        freg_t  cell_ctr_lo1_nc;/* Total cell transfer count (low)      */
-        u_int   fillercc[0x100-0xcc]; /* pad out to full address space   */
+	ffreg_t	idlehead_high;	/* Idle cell header (high)		*/
+	ffreg_t	idlehead_low;	/* Idle cell header (low)		*/
+	ffreg_t	maxrate;	/* Maximum rate				*/
+	ffreg_t	stparms;	/* Traffic Management Parameters	*/
+	ffreg_t	abrubr_abr;	/* ABRUBR Priority Byte 1, TCR Byte 0	*/
+	ffreg_t	rm_type;	/*					*/
+	u_int	filler5[0x17 - 0x06];
+	ffreg_t	cmd_reg;	/* Command register			*/
+	u_int	filler18[0x20 - 0x18];
+	ffreg_t	cbr_base;	/* CBR Pointer Base			*/
+	ffreg_t	vbr_base;	/* VBR Pointer Base			*/
+	ffreg_t	abr_base;	/* ABR Pointer Base			*/
+	ffreg_t	ubr_base;	/* UBR Pointer Base			*/
+	u_int	filler24;
+	ffreg_t	vbrwq_base;	/* VBR Wait Queue Base			*/
+	ffreg_t	abrwq_base;	/* ABR Wait Queue Base			*/
+	ffreg_t	ubrwq_base;	/* UBR Wait Queue Base			*/
+	ffreg_t	vct_base;	/* Main VC Table Base			*/
+	ffreg_t	vcte_base;	/* Extended Main VC Table Base		*/
+	u_int	filler2a[0x2C - 0x2A];
+	ffreg_t	cbr_tab_beg;	/* CBR Table Begin			*/
+	ffreg_t	cbr_tab_end;	/* CBR Table End			*/
+	ffreg_t	cbr_pointer;	/* CBR Pointer				*/
+	u_int	filler2f[0x30 - 0x2F];
+	ffreg_t	prq_st_adr;	/* Packet Ready Queue Start Address	*/
+	ffreg_t	prq_ed_adr;	/* Packet Ready Queue End Address	*/
+	ffreg_t	prq_rd_ptr;	/* Packet Ready Queue read pointer	*/
+	ffreg_t	prq_wr_ptr;	/* Packet Ready Queue write pointer	*/
+	ffreg_t	tcq_st_adr;	/* Transmit Complete Queue Start Address*/
+	ffreg_t	tcq_ed_adr;	/* Transmit Complete Queue End Address	*/
+	ffreg_t	tcq_rd_ptr;	/* Transmit Complete Queue read pointer */
+	ffreg_t	tcq_wr_ptr;	/* Transmit Complete Queue write pointer*/
+	u_int	filler38[0x40 - 0x38];
+	ffreg_t	queue_base;	/* Base address for PRQ and TCQ		*/
+	ffreg_t	desc_base;	/* Base address of descriptor table	*/
+	u_int	filler42[0x45 - 0x42];
+	ffreg_t	mode_reg_0;	/* Mode register 0			*/
+	ffreg_t	mode_reg_1;	/* Mode register 1			*/
+	ffreg_t	intr_status_reg;/* Interrupt Status register		*/
+	ffreg_t	mask_reg;	/* Mask Register			*/
+	ffreg_t	cell_ctr_high1; /* Total cell transfer count (high)	*/
+	ffreg_t	cell_ctr_lo1;	/* Total cell transfer count (low)	*/
+	ffreg_t	state_reg;	/* Status register			*/
+	u_int	filler4c[0x58 - 0x4c];
+	ffreg_t	curr_desc_num;	/* Contains the current descriptor num	*/
+	ffreg_t	next_desc;	/* Next descriptor			*/
+	ffreg_t	next_vc;	/* Next VC				*/
+	u_int	filler5b[0x5d - 0x5b];
+	ffreg_t	present_slot_cnt;/* Present slot count			*/
+	u_int	filler5e[0x6a - 0x5e];
+	ffreg_t	new_desc_num;	/* New descriptor number		*/
+	ffreg_t	new_vc;		/* New VC				*/
+	ffreg_t	sched_tbl_ptr;	/* Schedule table pointer		*/
+	ffreg_t	vbrwq_wptr;	/* VBR wait queue write pointer		*/
+	ffreg_t	vbrwq_rptr;	/* VBR wait queue read pointer		*/
+	ffreg_t	abrwq_wptr;	/* ABR wait queue write pointer		*/
+	ffreg_t	abrwq_rptr;	/* ABR wait queue read pointer		*/
+	ffreg_t	ubrwq_wptr;	/* UBR wait queue write pointer		*/
+	ffreg_t	ubrwq_rptr;	/* UBR wait queue read pointer		*/
+	ffreg_t	cbr_vc;		/* CBR VC				*/
+	ffreg_t	vbr_sb_vc;	/* VBR SB VC				*/
+	ffreg_t	abr_sb_vc;	/* ABR SB VC				*/
+	ffreg_t	ubr_sb_vc;	/* UBR SB VC				*/
+	ffreg_t	vbr_next_link;	/* VBR next link			*/
+	ffreg_t	abr_next_link;	/* ABR next link			*/
+	ffreg_t	ubr_next_link;	/* UBR next link			*/
+	u_int	filler7a[0x7c-0x7a];
+	ffreg_t	out_rate_head;	/* Out of rate head			*/
+	u_int	filler7d[0xca-0x7d]; /* pad out to full address space	*/
+	ffreg_t	cell_ctr_high1_nc;/* Total cell transfer count (high)	*/
+	ffreg_t	cell_ctr_lo1_nc;/* Total cell transfer count (low)	*/
+	u_int	fillercc[0x100-0xcc]; /* pad out to full address space	 */
 } ffredn_t;
 
 typedef struct _rfredn_t {
diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h
index 19e3fbfd5757..cb0c45488572 100644
--- a/drivers/bcma/bcma_private.h
+++ b/drivers/bcma/bcma_private.h
@@ -94,11 +94,16 @@ void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc);
 #ifdef CONFIG_BCMA_DRIVER_GPIO
 /* driver_gpio.c */
 int bcma_gpio_init(struct bcma_drv_cc *cc);
+int bcma_gpio_unregister(struct bcma_drv_cc *cc);
 #else
 static inline int bcma_gpio_init(struct bcma_drv_cc *cc)
 {
 	return -ENOTSUPP;
 }
+static inline int bcma_gpio_unregister(struct bcma_drv_cc *cc)
+{
+	return 0;
+}
 #endif /* CONFIG_BCMA_DRIVER_GPIO */
 
 #endif
diff --git a/drivers/bcma/driver_chipcommon_nflash.c b/drivers/bcma/driver_chipcommon_nflash.c
index dbda91e4dff5..1f0b83e18f68 100644
--- a/drivers/bcma/driver_chipcommon_nflash.c
+++ b/drivers/bcma/driver_chipcommon_nflash.c
@@ -21,7 +21,7 @@ int bcma_nflash_init(struct bcma_drv_cc *cc)
 	struct bcma_bus *bus = cc->core->bus;
 
 	if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4706 &&
-	    cc->core->id.rev != 0x38) {
+	    cc->core->id.rev != 38) {
 		bcma_err(bus, "NAND flash on unsupported board!\n");
 		return -ENOTSUPP;
 	}
diff --git a/drivers/bcma/driver_gpio.c b/drivers/bcma/driver_gpio.c
index 9a6f585da2d9..71f755c06fc6 100644
--- a/drivers/bcma/driver_gpio.c
+++ b/drivers/bcma/driver_gpio.c
@@ -96,3 +96,8 @@ int bcma_gpio_init(struct bcma_drv_cc *cc)
 
 	return gpiochip_add(chip);
 }
+
+int bcma_gpio_unregister(struct bcma_drv_cc *cc)
+{
+	return gpiochip_remove(&cc->gpio);
+}
diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c
index 4a92f647b58b..324f9debda88 100644
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -268,6 +268,13 @@ int bcma_bus_register(struct bcma_bus *bus)
 void bcma_bus_unregister(struct bcma_bus *bus)
 {
 	struct bcma_device *cores[3];
+	int err;
+
+	err = bcma_gpio_unregister(&bus->drv_cc);
+	if (err == -EBUSY)
+		bcma_err(bus, "Some GPIOs are still in use.\n");
+	else if (err)
+		bcma_err(bus, "Can not unregister GPIO driver: %i\n", err);
 
 	cores[0] = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
 	cores[1] = bcma_find_core(bus, BCMA_CORE_PCIE);
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 1877ed7ca086..1c9e09fbdff8 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -1053,6 +1053,7 @@ static ssize_t bonding_store_primary(struct device *d,
 		pr_info("%s: Setting primary slave to None.\n",
 			bond->dev->name);
 		bond->primary_slave = NULL;
+		memset(bond->params.primary, 0, sizeof(bond->params.primary));
 		bond_select_active_slave(bond);
 		goto out;
 	}
diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index 58607f196c9e..2282b1ae9765 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -488,8 +488,12 @@ static void c_can_setup_receive_object(struct net_device *dev, int iface,
 
 	priv->write_reg(priv, C_CAN_IFACE(MASK1_REG, iface),
 			IFX_WRITE_LOW_16BIT(mask));
+
+	/* According to C_CAN documentation, the reserved bit
+	 * in IFx_MASK2 register is fixed 1
+	 */
 	priv->write_reg(priv, C_CAN_IFACE(MASK2_REG, iface),
-			IFX_WRITE_HIGH_16BIT(mask));
+			IFX_WRITE_HIGH_16BIT(mask) | BIT(13));
 
 	priv->write_reg(priv, C_CAN_IFACE(ARB1_REG, iface),
 			IFX_WRITE_LOW_16BIT(id));
diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index 4eba17b83ba8..f1b3df167ff2 100644
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -36,13 +36,13 @@
 
 #define DRV_VER			"4.4.161.0u"
 #define DRV_NAME		"be2net"
-#define BE_NAME			"ServerEngines BladeEngine2 10Gbps NIC"
-#define BE3_NAME		"ServerEngines BladeEngine3 10Gbps NIC"
-#define OC_NAME			"Emulex OneConnect 10Gbps NIC"
+#define BE_NAME			"Emulex BladeEngine2"
+#define BE3_NAME		"Emulex BladeEngine3"
+#define OC_NAME			"Emulex OneConnect"
 #define OC_NAME_BE		OC_NAME	"(be3)"
 #define OC_NAME_LANCER		OC_NAME "(Lancer)"
 #define OC_NAME_SH		OC_NAME "(Skyhawk)"
-#define DRV_DESC		"ServerEngines BladeEngine 10Gbps NIC Driver"
+#define DRV_DESC		"Emulex OneConnect 10Gbps NIC Driver"
 
 #define BE_VENDOR_ID 		0x19a2
 #define EMULEX_VENDOR_ID	0x10df
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 5c995700e534..4d6f3c54427a 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -25,7 +25,7 @@
 MODULE_VERSION(DRV_VER);
 MODULE_DEVICE_TABLE(pci, be_dev_ids);
 MODULE_DESCRIPTION(DRV_DESC " " DRV_VER);
-MODULE_AUTHOR("ServerEngines Corporation");
+MODULE_AUTHOR("Emulex Corporation");
 MODULE_LICENSE("GPL");
 
 static unsigned int num_vfs;
diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h
index 02a12b69555f..4dab6fc265a2 100644
--- a/drivers/net/ethernet/intel/e1000e/defines.h
+++ b/drivers/net/ethernet/intel/e1000e/defines.h
@@ -232,6 +232,7 @@
 #define E1000_CTRL_FRCDPX   0x00001000  /* Force Duplex */
 #define E1000_CTRL_LANPHYPC_OVERRIDE 0x00010000 /* SW control of LANPHYPC */
 #define E1000_CTRL_LANPHYPC_VALUE    0x00020000 /* SW value of LANPHYPC */
+#define E1000_CTRL_MEHE     0x00080000  /* Memory Error Handling Enable */
 #define E1000_CTRL_SWDPIN0  0x00040000  /* SWDPIN 0 value */
 #define E1000_CTRL_SWDPIN1  0x00080000  /* SWDPIN 1 value */
 #define E1000_CTRL_SWDPIO0  0x00400000  /* SWDPIN 0 Input or output */
@@ -389,6 +390,12 @@
 
 #define E1000_PBS_16K E1000_PBA_16K
 
+/* Uncorrectable/correctable ECC Error counts and enable bits */
+#define E1000_PBECCSTS_CORR_ERR_CNT_MASK	0x000000FF
+#define E1000_PBECCSTS_UNCORR_ERR_CNT_MASK	0x0000FF00
+#define E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT	8
+#define E1000_PBECCSTS_ECC_ENABLE		0x00010000
+
 #define IFS_MAX       80
 #define IFS_MIN       40
 #define IFS_RATIO     4
@@ -408,6 +415,7 @@
 #define E1000_ICR_RXSEQ         0x00000008 /* Rx sequence error */
 #define E1000_ICR_RXDMT0        0x00000010 /* Rx desc min. threshold (0) */
 #define E1000_ICR_RXT0          0x00000080 /* Rx timer intr (ring 0) */
+#define E1000_ICR_ECCER         0x00400000 /* Uncorrectable ECC Error */
 #define E1000_ICR_INT_ASSERTED  0x80000000 /* If this bit asserted, the driver should claim the interrupt */
 #define E1000_ICR_RXQ0          0x00100000 /* Rx Queue 0 Interrupt */
 #define E1000_ICR_RXQ1          0x00200000 /* Rx Queue 1 Interrupt */
@@ -443,6 +451,7 @@
 #define E1000_IMS_RXSEQ     E1000_ICR_RXSEQ     /* Rx sequence error */
 #define E1000_IMS_RXDMT0    E1000_ICR_RXDMT0    /* Rx desc min. threshold */
 #define E1000_IMS_RXT0      E1000_ICR_RXT0      /* Rx timer intr */
+#define E1000_IMS_ECCER     E1000_ICR_ECCER     /* Uncorrectable ECC Error */
 #define E1000_IMS_RXQ0