Merge tag 'devicetree-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:
 "DT core:

   - Add cleanup.h based auto release of struct device_node pointers via
     __free marking and new for_each_child_of_node_scoped() iterator to
     use it.

   - Always create a base skeleton DT when CONFIG_OF is enabled. This
     supports several usecases of adding DT data on non-DT booted
     systems.

   - Move around some /reserved-memory code in preparation for further
     improvements

   - Add a stub for_each_property_of_node() for !OF

   - Adjust the printk levels on some messages

   - Fix __be32 sparse warning

   - Drop RESERVEDMEM_OF_DECLARE usage from Freescale qbman driver
     (currently orphaned)

   - Add Saravana Kannan and drop Frank Rowand as DT maintainers

  DT bindings:

   - Convert Mediatek timer, Mediatek sysirq, fsl,imx6ul-tsc,
     fsl,imx6ul-pinctrl, Atmel AIC, Atmel HLCDC, FPGA region, and
     xlnx,sd-fec to DT schemas

   - Add existing, but undocumented fsl,imx-anatop binding

   - Add bunch of undocumented vendor prefixes used in compatible
     strings

   - Drop obsolete brcm,bcm2835-pm-wdt binding

   - Drop obsolete i2c.txt which as been replaced with schema in
     dtschema

   - Add DPS310 device and sort trivial-devices.yaml

   - Enable undocumented compatible checks on DT binding examples

   - More QCom maintainer fixes/updates

   - Updates to writing-schema.rst and DT submitting-patches.rst to
     cover some frequent review comments

   - Clean-up SPDX tags to use 'OR' rather than 'or'"

* tag 'devicetree-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (56 commits)
  dt-bindings: soc: imx: fsl,imx-anatop: add imx6q regulators
  of: unittest: Use for_each_child_of_node_scoped()
  of: Introduce for_each_*_child_of_node_scoped() to automate of_node_put() handling
  of: Add cleanup.h based auto release via __free(device_node) markings
  of: Move all FDT reserved-memory handling into of_reserved_mem.c
  of: Add KUnit test to confirm DTB is loaded
  of: unittest: treat missing of_root as error instead of fixing up
  x86/of: Unconditionally call unflatten_and_copy_device_tree()
  um: Unconditionally call unflatten_device_tree()
  of: Create of_root if no dtb provided by firmware
  of: Always unflatten in unflatten_and_copy_device_tree()
  dt-bindings: timer: mediatek: Convert to json-schema
  dt-bindings: interrupt-controller: fsl,intmux: Include power-domains support
  soc: fsl: qbman: Remove RESERVEDMEM_OF_DECLARE usage
  dt-bindings: fsl-imx-sdma: fix HDMI audio index
  dt-bindings: soc: imx: fsl,imx-iomuxc-gpr: add imx6
  dt-bindings: soc: imx: fsl,imx-anatop: add binding
  dt-bindings: input: touchscreen: fsl,imx6ul-tsc convert to YAML
  dt-bindings: pinctrl: fsl,imx6ul-pinctrl: convert to YAML
  of: make for_each_property_of_node() available to to !OF
  ...

69 files changed, 1724 insertions, 1385 deletions

diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile
index 129cf698fa8a..5e08e3a6a97b 100644
--- a/Documentation/devicetree/bindings/Makefile
+++ b/Documentation/devicetree/bindings/Makefile
@@ -64,9 +64,6 @@ override DTC_FLAGS := \
 	-Wno-unique_unit_address \
 	-Wunique_unit_address_if_enabled
 
-# Disable undocumented compatible checks until warning free
-override DT_CHECKER_FLAGS ?=
-
 $(obj)/processed-schema.json: $(DT_DOCS) $(src)/.yamllint check_dtschema_version FORCE
 	$(call if_changed_rule,chkdt)
 
diff --git a/Documentation/devicetree/bindings/arm/syna.txt b/Documentation/devicetree/bindings/arm/syna.txt
index 851f48ead927..f53c430f648c 100644
--- a/Documentation/devicetree/bindings/arm/syna.txt
+++ b/Documentation/devicetree/bindings/arm/syna.txt
@@ -6,18 +6,6 @@ berlin SoCs are now Synaptics' SoCs now.
 
 ---------------------------------------------------------------
 
-Work in progress statement:
-
-Device tree files and bindings applying to Marvell Berlin SoCs and boards are
-considered "unstable". Any Marvell Berlin device tree binding may change at any
-time. Be sure to use a device tree binary and a kernel image generated from the
-same source tree.
-
-Please refer to Documentation/devicetree/bindings/ABI.rst for a definition of a
-stable binding/ABI.
-
----------------------------------------------------------------
-
 Boards with a SoC of the Marvell Berlin family, e.g. Armada 1500
 shall have the following properties:
 
diff --git a/Documentation/devicetree/bindings/display/atmel/atmel,hlcdc-display-controller.yaml b/Documentation/devicetree/bindings/display/atmel/atmel,hlcdc-display-controller.yaml
new file mode 100644
index 000000000000..29ed42485de3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/atmel/atmel,hlcdc-display-controller.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/atmel/atmel,hlcdc-display-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel's High LCD Controller (HLCDC)
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Claudiu Beznea <claudiu.beznea@tuxon.dev>
+
+description:
+  The LCD Controller (LCDC) consists of logic for transferring LCD image
+  data from an external display buffer to a TFT LCD panel. The LCDC has one
+  display input buffer per layer that fetches pixels through the single bus
+  host interface and a look-up table to allow palletized display
+  configurations.
+
+properties:
+  compatible:
+    const: atmel,hlcdc-display-controller
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  port@0:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description:
+      Output endpoint of the controller, connecting the LCD panel signals.
+
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+      reg:
+        maxItems: 1
+
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+        description:
+          Endpoint connecting the LCD panel signals.
+
+        properties:
+          bus-width:
+            enum: [ 12, 16, 18, 24 ]
+
+required:
+  - '#address-cells'
+  - '#size-cells'
+  - compatible
+  - port@0
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt
deleted file mode 100644
index 923aea25344c..000000000000
--- a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt
+++ /dev/null
@@ -1,75 +0,0 @@
-Device-Tree bindings for Atmel's HLCDC (High LCD Controller) DRM driver
-
-The Atmel HLCDC Display Controller is subdevice of the HLCDC MFD device.
-See ../../mfd/atmel-hlcdc.txt for more details.
-
-Required properties:
- - compatible: value should be "atmel,hlcdc-display-controller"
- - pinctrl-names: the pin control state names. Should contain "default".
- - pinctrl-0: should contain the default pinctrl states.
- - #address-cells: should be set to 1.
- - #size-cells: should be set to 0.
-
-Required children nodes:
- Children nodes are encoding available output ports and their connections
- to external devices using the OF graph representation (see ../graph.txt).
- At least one port node is required.
-
-Optional properties in grandchild nodes:
- Any endpoint grandchild node may specify a desired video interface
- according to ../../media/video-interfaces.txt, specifically
- - bus-width: recognized values are <12>, <16>, <18> and <24>, and
-   override any output mode selection heuristic, forcing "rgb444",
-   "rgb565", "rgb666" and "rgb888" respectively.
-
-Example:
-
-	hlcdc: hlcdc@f0030000 {
-		compatible = "atmel,sama5d3-hlcdc";
-		reg = <0xf0030000 0x2000>;
-		interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
-		clock-names = "periph_clk","sys_clk", "slow_clk";
-
-		hlcdc-display-controller {
-			compatible = "atmel,hlcdc-display-controller";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0>;
-
-				hlcdc_panel_output: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&panel_input>;
-				};
-			};
-		};
-
-		hlcdc_pwm: hlcdc-pwm {
-			compatible = "atmel,hlcdc-pwm";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd_pwm>;
-			#pwm-cells = <3>;
-		};
-	};
-
-Example 2: With a video interface override to force rgb565; as above
-but with these changes/additions:
-
-	&hlcdc {
-		hlcdc-display-controller {
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>;
-
-			port@0 {
-				hlcdc_panel_output: endpoint@0 {
-					bus-width = <16>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
index 1c2be8d6f633..0681fc49aa1b 100644
--- a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
+++ b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
@@ -123,10 +123,16 @@ allOf:
   - if:
       properties:
         compatible:
+          const: fsl,imx6sx-lcdif
+    then:
+      required:
+        - power-domains
+  - if:
+      properties:
+        compatible:
           contains:
             enum:
               - fsl,imx6sl-lcdif
-              - fsl,imx6sx-lcdif
               - fsl,imx8mm-lcdif
               - fsl,imx8mn-lcdif
               - fsl,imx8mp-lcdif
diff --git a/Documentation/devicetree/bindings/display/panel/visionox,r66451.yaml b/Documentation/devicetree/bindings/display/panel/visionox,r66451.yaml
index 6ba323683921..187840bb76c7 100644
--- a/Documentation/devicetree/bindings/display/panel/visionox,r66451.yaml
+++ b/Documentation/devicetree/bindings/display/panel/visionox,r66451.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/display/panel/visionox,r66451.yaml#
diff --git a/Documentation/devicetree/bindings/dma/fsl,imx-sdma.yaml b/Documentation/devicetree/bindings/dma/fsl,imx-sdma.yaml
index b95dd8db5a30..37135fa024f9 100644
--- a/Documentation/devicetree/bindings/dma/fsl,imx-sdma.yaml
+++ b/Documentation/devicetree/bindings/dma/fsl,imx-sdma.yaml
@@ -92,7 +92,8 @@ properties:
               description: needs firmware more than ver 2
           - Shared ASRC: 23
           - SAI: 24
-          - HDMI Audio: 25
+          - Multi SAI: 25
+          - HDMI Audio: 26
 
        The third cell: transfer priority ID
          enum:
diff --git a/Documentation/devicetree/bindings/fpga/fpga-region.txt b/Documentation/devicetree/bindings/fpga/fpga-region.txt
deleted file mode 100644
index 528df8a0e6d8..000000000000
--- a/Documentation/devicetree/bindings/fpga/fpga-region.txt
+++ /dev/null
@@ -1,479 +0,0 @@
-FPGA Region Device Tree Binding
-
-Alan Tull 2016
-
- CONTENTS
- - Introduction
- - Terminology
- - Sequence
- - FPGA Region
- - Supported Use Models
- - Device Tree Examples
- - Constraints
-
-
-Introduction
-============
-
-FPGA Regions represent FPGA's and partial reconfiguration regions of FPGA's in
-the Device Tree.  FPGA Regions provide a way to program FPGAs under device tree
-control.
-
-This device tree binding document hits some of the high points of FPGA usage and
-attempts to include terminology used by both major FPGA manufacturers.  This
-document isn't a replacement for any manufacturers specifications for FPGA
-usage.
-
-
-Terminology
-===========
-
-Full Reconfiguration
- * The entire FPGA is programmed.
-
-Partial Reconfiguration (PR)
- * A section of an FPGA is reprogrammed while the rest of the FPGA is not
-   affected.
- * Not all FPGA's support PR.
-
-Partial Reconfiguration Region (PRR)
- * Also called a "reconfigurable partition"
- * A PRR is a specific section of an FPGA reserved for reconfiguration.
- * A base (or static) FPGA image may create a set of PRR's that later may
-   be independently reprogrammed many times.
- * The size and specific location of each PRR is fixed.
- * The connections at the edge of each PRR are fixed.  The image that is loaded
-   into a PRR must fit and must use a subset of the region's connections.
- * The busses within the FPGA are split such that each region gets its own
-   branch that may be gated independently.
-
-Persona
- * Also called a "partial bit stream"
- * An FPGA image that is designed to be loaded into a PRR.  There may be
-   any number of personas designed to fit into a PRR, but only one at at time
-   may be loaded.
- * A persona may create more regions.
-
-FPGA Bridge
- * FPGA Bridges gate bus signals between a host and FPGA.
- * FPGA Bridges should be disabled while the FPGA is being programmed to
-   prevent spurious signals on the cpu bus and to the soft logic.
- * FPGA bridges may be actual hardware or soft logic on an FPGA.
- * During Full Reconfiguration, hardware bridges between the host and FPGA
-   will be disabled.
- * During Partial Reconfiguration of a specific region, that region's bridge
-   will be used to gate the busses.  Traffic to other regions is not affected.
- * In some implementations, the FPGA Manager transparently handles gating the
-   buses, eliminating the need to show the hardware FPGA bridges in the
-   device tree.
- * An FPGA image may create a set of reprogrammable regions, each having its
-   own bridge and its own split of the busses in the FPGA.
-
-FPGA Manager
- * An FPGA Manager is a hardware block that programs an FPGA under the control
-   of a host processor.
-
-Base Image
- * Also called the "static image"
- * An FPGA image that is designed to do full reconfiguration of the FPGA.
- * A base image may set up a set of partial reconfiguration regions that may
-   later be reprogrammed.
-
-    ----------------       ----------------------------------
-    |  Host CPU    |       |             FPGA               |
-    |              |       |                                |
-    |          ----|       |       -----------    --------  |
-    |          | H |       |   |==>| Bridge0 |<==>| PRR0 |  |
-    |          | W |       |   |   -----------    --------  |
-    |          |   |       |   |                            |
-    |          | B |<=====>|<==|   -----------    --------  |
-    |          | R |       |   |==>| Bridge1 |<==>| PRR1 |  |
-    |          | I |       |   |   -----------    --------  |
-    |          | D |       |   |                            |
-    |          | G |       |   |   -----------    --------  |
-    |          | E |       |   |==>| Bridge2 |<==>| PRR2 |  |
-    |          ----|       |       -----------    --------  |
-    |              |       |                                |
-    ----------------       ----------------------------------
-
-Figure 1: An FPGA set up with a base image that created three regions.  Each
-region (PRR0-2) gets its own split of the busses that is independently gated by
-a soft logic bridge (Bridge0-2) in the FPGA.  The contents of each PRR can be
-reprogrammed independently while the rest of the system continues to function.
-
-
-Sequence
-========
-
-When a DT overlay that targets an FPGA Region is appli