Merge tag 'pci-v6.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Batch sizing of multiple BARs while memory decoding is disabled
     instead of disabling/enabling decoding for each BAR individually;
     this optimizes virtualized environments where toggling decoding
     enable is expensive (Alex Williamson)

   - Add host bridge .enable_device() and .disable_device() hooks for
     bridges that need to configure things like Requester ID to StreamID
     mapping when enabling devices (Frank Li)

   - Extend struct pci_ecam_ops with .enable_device() and
     .disable_device() hooks so drivers that use pci_host_common_probe()
     instead of their own .probe() have a way to set the
     .enable_device() callbacks (Marc Zyngier)

   - Drop 'No bus range found' message so we don't complain when DTs
     don't specify the default 'bus-range = <0x00 0xff>' (Bjorn Helgaas)

   - Rename the drivers/pci/of_property.c struct of_pci_range to
     of_pci_range_entry to avoid confusion with the global of_pci_range
     in include/linux/of_address.h (Bjorn Helgaas)

  Driver binding:

   - Update resource request API documentation to encourage callers to
     supply a driver name when requesting resources (Philipp Stanner)

   - Export pci_intx_unmanaged() and pcim_intx() (always managed) so
     callers of pci_intx() (which is sometimes managed) can explicitly
     choose the one they need (Philipp Stanner)

   - Convert drivers from pci_intx() to always-managed pcim_intx() or
     never-managed pci_intx_unmanaged(): amd_sfh, ata (ahci, ata_piix,
     pata_rdc, sata_sil24, sata_sis, sata_uli, sata_vsc), bnx2x, bna,
     ntb, qtnfmac, rtsx, tifm_7xx1, vfio, xen-pciback (Philipp Stanner)

   - Remove pci_intx_unmanaged() since pci_intx() is now always
     unmanaged and pcim_intx() is always managed (Philipp Stanner)

  Error handling:

   - Unexport pcie_read_tlp_log() to encourage drivers to use PCI core
     logging rather than building their own (Ilpo Järvinen)

   - Move TLP Log handling to its own file (Ilpo Järvinen)

   - Store number of supported End-End TLP Prefixes always so we can
     read the correct number of DWORDs from the TLP Prefix Log (Ilpo
     Järvinen)

   - Read TLP Prefixes in addition to the Header Log in
     pcie_read_tlp_log() (Ilpo Järvinen)

   - Add pcie_print_tlp_log() to consolidate printing of TLP Header and
     Prefix Log (Ilpo Järvinen)

   - Quirk the Intel Raptor Lake-P PIO log size to accommodate vendor
     BIOSes that don't configure it correctly (Takashi Iwai)

  ASPM:

   - Save parent L1 PM Substates config so when we restore it along with
     an endpoint's config, the parent info isn't junk (Jian-Hong Pan)

  Power management:

   - Avoid D3 for Root Ports on TUXEDO Sirius Gen1 with old BIOS because
     the system can't wake up from suspend (Werner Sembach)

  Endpoint framework:

   - Destroy the EPC device in devm_pci_epc_destroy(), which previously
     didn't call devres_release() (Zijun Hu)

   - Finish virtual EP removal in pci_epf_remove_vepf(), which
     previously caused a subsequent pci_epf_add_vepf() to fail with
     -EBUSY (Zijun Hu)

   - Write BAR_MASK before iATU registers in pci_epc_set_bar() so we
     don't depend on the BAR_MASK reset value being larger than the
     requested BAR size (Niklas Cassel)

   - Prevent changing BAR size/flags in pci_epc_set_bar() to prevent
     reads from bypassing the iATU if we reduced the BAR size (Niklas
     Cassel)

   - Verify address alignment when programming iATU so we don't attempt
     to write bits that are read-only because of the BAR size, which
     could lead to directing accesses to the wrong address (Niklas
     Cassel)

   - Implement artpec6 pci_epc_features so we can rely on all drivers
     supporting it so we can use it in EPC core code (Niklas Cassel)

   - Check for BARs of fixed size to prevent endpoint drivers from
     trying to change their size (Niklas Cassel)

   - Verify that requested BAR size is a power of two when endpoint
     driver sets the BAR (Niklas Cassel)

  Endpoint framework tests:

   - Clear pci-epf-test dma_chan_rx, not dma_chan_tx, after freeing
     dma_chan_rx (Mohamed Khalfella)

   - Correct the DMA MEMCPY test so it doesn't fail if the Endpoint
     supports both DMA_PRIVATE and DMA_MEMCPY (Manivannan Sadhasivam)

   - Add pci-epf-test and pci_endpoint_test support for capabilities
     (Niklas Cassel)

   - Add Endpoint test for consecutive BARs (Niklas Cassel)

   - Remove redundant comparison from Endpoint BAR test because a > 1MB
     BAR can always be exactly covered by iterating with a 1MB buffer
     (Hans Zhang)

   - Move and convert PCI Endpoint tests from tools/pci to Kselftests
     (Manivannan Sadhasivam)

  Apple PCIe controller driver:

   - Convert StreamID mapping configuration from a bus notifier to the
     .enable_device() and .disable_device() callbacks (Marc Zyngier)

  Freescale i.MX6 PCIe controller driver:

   - Add Requester ID to StreamID mapping configuration when enabling
     devices (Frank Li)

   - Use DWC core suspend/resume functions for imx6 (Frank Li)

   - Add suspend/resume support for i.MX8MQ, i.MX8Q, and i.MX95 (Richard
     Zhu)

   - Add DT compatible string 'fsl,imx8q-pcie-ep' and driver support for
     i.MX8Q series (i.MX8QM, i.MX8QXP, and i.MX8DXL) Endpoints (Frank
     Li)

   - Add DT binding for optional i.MX95 Refclk and driver support to
     enable it if the platform hasn't enabled it (Richard Zhu)

   - Configure PHY based on controller being in Root Complex or Endpoint
     mode (Frank Li)

   - Rely on dbi2 and iATU base addresses from DT via
     dw_pcie_get_resources() instead of hardcoding them (Richard Zhu)

   - Deassert apps_reset in imx_pcie_deassert_core_reset() since it is
     asserted in imx_pcie_assert_core_reset() (Richard Zhu)

   - Add missing reference clock enable or disable logic for IMX6SX,
     IMX7D, IMX8MM (Richard Zhu)

   - Remove redundant imx7d_pcie_init_phy() since
     imx7d_pcie_enable_ref_clk() does the same thing (Richard Zhu)

  Freescale Layerscape PCIe controller driver:

   - Simplify by using syscon_regmap_lookup_by_phandle_args() instead
     of syscon_regmap_lookup_by_phandle() followed by
     of_property_read_u32_array() (Krzysztof Kozlowski)

  Marvell MVEBU PCIe controller driver:

   - Add MODULE_DEVICE_TABLE() to enable module autoloading (Liao Chen)

  MediaTek PCIe Gen3 controller driver:

   - Use clk_bulk_prepare_enable() instead of separate
     clk_bulk_prepare() and clk_bulk_enable() (Lorenzo Bianconi)

   - Rearrange reset assert/deassert so they're both done in the
     *_power_up() callbacks (Lorenzo Bianconi)

   - Document that Airoha EN7581 requires PHY init and power-on before
     PHY reset deassert, unlike other MediaTek Gen3 controllers (Lorenzo
     Bianconi)

   - Move Airoha EN7581 post-reset delay from the en7581 clock .enable()
     method to mtk_pcie_en7581_power_up() (Lorenzo Bianconi)

   - Sleep instead of delay during Airoha EN7581 power-up, since this is
     a non-atomic context (Lorenzo Bianconi)

   - Skip PERST# assertion on Airoha EN7581 during probe and
     suspend/resume to avoid a hardware defect (Lorenzo Bianconi)

   - Enable async probe to reduce system startup time (Douglas Anderson)

  Microchip PolarFlare PCIe controller driver:

   - Set up the inbound address translation based on whether the
     platform allows coherent or non-coherent DMA (Daire McNamara)

   - Update DT binding such that platforms are DMA-coherent by default
     and must specify 'dma-noncoherent' if needed (Conor Dooley)

  Mobiveil PCIe controller driver:

   - Convert mobiveil-pcie.txt to YAML and update 'interrupt-names'
     and 'reg-names' (Frank Li)

  Qualcomm PCIe controller driver:

   - Add DT SM8550 and SM8650 optional 'global' interrupt for link
     events (Neil Armstrong)

   - Add DT 'compatible' strings for IPQ5424 PCIe controller (Manikanta
     Mylavarapu)

   - If 'global' IRQ is supported for detection of Link Up events, tell
     DWC core not to wait for link up (Krishna chaitanya chundru)

  Renesas R-Car PCIe controller driver:

   - Avoid passing stack buffer as resource name (King Dix)

  Rockchip PCIe controller driver:

   - Simplify clock and reset handling by using bulk interfaces (Anand
     Moon)

   - Pass typed rockchip_pcie (not void) pointer to
     rockchip_pcie_disable_clocks() (Anand Moon)

   - Return -ENOMEM, not success, when pci_epc_mem_alloc_addr() fails
     (Dan Carpenter)

  Rockchip DesignWare PCIe controller driver:

   - Use dll_link_up IRQ to detect Link Up and enumerate devices so
     users don't have to manually rescan (Niklas Cassel)

   - Tell DWC core not to wait for link up since the 'sys' interrupt is
     required and detects Link Up events (Niklas Cassel)

  Synopsys DesignWare PCIe controller driver:

   - Don't wait for link up in DWC core if driver can detect Link Up
     event (Krishna chaitanya chundru)

   - Update ICC and OPP votes after Link Up events (Krishna chaitanya
     chundru)

   - Always stop link in dw_pcie_suspend_noirq(), which is required at
     least for i.MX8QM to re-establish link on resume (Richard Zhu)

   - Drop racy and unnecessary LTSSM state check before sending
     PME_TURN_OFF message in dw_pcie_suspend_noirq() (Richard Zhu)

   - Add struct of_pci_range.parent_bus_addr for devices that need their
     immediate parent bus address, not the CPU address, e.g., to program
     an internal Address Translation Unit (iATU) (Frank Li)

  TI DRA7xx PCIe controller driver:

   - Simplify by using syscon_regmap_lookup_by_phandle_args() instead of
     syscon_regmap_lookup_by_phandle() followed by
     of_parse_phandle_with_fixed_args() or of_property_read_u32_index()
     (Krzysztof Kozlowski)

  Xilinx Versal CPM PCIe controller driver:

   - Add DT binding and driver support for Xilinx Versal CPM5
     (Thippeswamy Havalige)

  MicroSemi Switchtec management driver:

   - Add Microchip PCI100X device IDs (Rakesh Babu Saladi)

  Miscellaneous:

   - Move reset related sysfs code from pci.c to pci-sysfs.c where other
     similar code lives (Ilpo Järvinen)

   - Simplify reset_method_store() memory management by using __free()
     instead of explicit kfree() cleanup (Ilpo Järvinen)

   - Constify struct bin_attribute for sysfs, VPD, P2PDMA, and the IBM
     ACPI hotplug driver (Thomas Weißschuh)

   - Remove redundant PCI_VSEC_HDR and PCI_VSEC_HDR_LEN_SHIFT (Dongdong
     Zhang)

   - Correct documentation of the 'config_acs=' kernel parameter
     (Akihiko Odaki)"

* tag 'pci-v6.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (111 commits)
  PCI: Batch BAR sizing operations
  dt-bindings: PCI: microchip,pcie-host: Allow dma-noncoherent
  PCI: microchip: Set inbound address translation for coherent or non-coherent mode
  Documentation: Fix pci=config_acs= example
  PCI: Remove redundant PCI_VSEC_HDR and PCI_VSEC_HDR_LEN_SHIFT
  PCI: Don't include 'pm_wakeup.h' directly
  selftests: pci_endpoint: Migrate to Kselftest framework
  selftests: Move PCI Endpoint tests from tools/pci to Kselftests
  misc: pci_endpoint_test: Fix IOCTL return value
  dt-bindings: PCI: qcom: Document the IPQ5424 PCIe controller
  dt-bindings: PCI: qcom,pcie-sm8550: Document 'global' interrupt
  dt-bindings: PCI: mobiveil: Convert mobiveil-pcie.txt to YAML
  PCI: switchtec: Add Microchip PCI100X device IDs
  misc: pci_endpoint_test: Remove redundant 'remainder' test
  misc: pci_endpoint_test: Add consecutive BAR test
  misc: pci_endpoint_test: Add support for capabilities
  PCI: endpoint: pci-epf-test: Add support for capabilities
  PCI: endpoint: pci-epf-test: Fix check for DMA MEMCPY test
  PCI: endpoint: pci-epf-test: Set dma_chan_rx pointer to NULL on error
  PCI: dwc: Simplify config resource lookup
  ...

89 files changed, 2249 insertions, 1671 deletions

diff --git a/Documentation/PCI/endpoint/pci-test-howto.rst b/Documentation/PCI/endpoint/pci-test-howto.rst
index 909f770a07d6..aafc17ef3fd3 100644
--- a/Documentation/PCI/endpoint/pci-test-howto.rst
+++ b/Documentation/PCI/endpoint/pci-test-howto.rst
@@ -81,8 +81,8 @@ device, the following commands can be used::
 
 	# echo 0x104c > functions/pci_epf_test/func1/vendorid
 	# echo 0xb500 > functions/pci_epf_test/func1/deviceid
-	# echo 16 > functions/pci_epf_test/func1/msi_interrupts
-	# echo 8 > functions/pci_epf_test/func1/msix_interrupts
+	# echo 32 > functions/pci_epf_test/func1/msi_interrupts
+	# echo 2048 > functions/pci_epf_test/func1/msix_interrupts
 
 
 Binding pci-epf-test Device to EP Controller
@@ -123,113 +123,83 @@ above::
 Using Endpoint Test function Device
 -----------------------------------
 
-pcitest.sh added in tools/pci/ can be used to run all the default PCI endpoint
-tests. To compile this tool the following commands should be used::
+Kselftest added in tools/testing/selftests/pci_endpoint can be used to run all
+the default PCI endpoint tests. To build the Kselftest for PCI endpoint
+subsystem, the following commands should be used::
 
 	# cd <kernel-dir>
-	# make -C tools/pci
+	# make -C tools/testing/selftests/pci_endpoint
 
 or if you desire to compile and install in your system::
 
 	# cd <kernel-dir>
-	# make -C tools/pci install
+	# make -C tools/testing/selftests/pci_endpoint INSTALL_PATH=/usr/bin install
 
-The tool and script will be located in <rootfs>/usr/bin/
+The test will be located in <rootfs>/usr/bin/
 
-
-pcitest.sh Output
-~~~~~~~~~~~~~~~~~
+Kselftest Output
+~~~~~~~~~~~~~~~~
 ::
 
-	# pcitest.sh
-	BAR tests
-
-	BAR0:           OKAY
-	BAR1:           OKAY
-	BAR2:           OKAY
-	BAR3:           OKAY
-	BAR4:           NOT OKAY
-	BAR5:           NOT OKAY
-
-	Interrupt tests
-
-	SET IRQ TYPE TO LEGACY:         OKAY
-	LEGACY IRQ:     NOT OKAY
-	SET IRQ TYPE TO MSI:            OKAY
-	MSI1:           OKAY
-	MSI2:           OKAY
-	MSI3:           OKAY
-	MSI4:           OKAY
-	MSI5:           OKAY
-	MSI6:           OKAY
-	MSI7:           OKAY
-	MSI8:           OKAY
-	MSI9:           OKAY
-	MSI10:          OKAY
-	MSI11:          OKAY
-	MSI12:          OKAY
-	MSI13:          OKAY
-	MSI14:          OKAY
-	MSI15:          OKAY
-	MSI16:          OKAY
-	MSI17:          NOT OKAY
-	MSI18:          NOT OKAY
-	MSI19:          NOT OKAY
-	MSI20:          NOT OKAY
-	MSI21:          NOT OKAY
-	MSI22:          NOT OKAY
-	MSI23:          NOT OKAY
-	MSI24:          NOT OKAY
-	MSI25:          NOT OKAY
-	MSI26:          NOT OKAY
-	MSI27:          NOT OKAY
-	MSI28:          NOT OKAY
-	MSI29:          NOT OKAY
-	MSI30:          NOT OKAY
-	MSI31:          NOT OKAY
-	MSI32:          NOT OKAY
-	SET IRQ TYPE TO MSI-X:          OKAY
-	MSI-X1:         OKAY
-	MSI-X2:         OKAY
-	MSI-X3:         OKAY
-	MSI-X4:         OKAY
-	MSI-X5:         OKAY
-	MSI-X6:         OKAY
-	MSI-X7:         OKAY
-	MSI-X8:         OKAY
-	MSI-X9:         NOT OKAY
-	MSI-X10:        NOT OKAY
-	MSI-X11:        NOT OKAY
-	MSI-X12:        NOT OKAY
-	MSI-X13:        NOT OKAY
-	MSI-X14:        NOT OKAY
-	MSI-X15:        NOT OKAY
-	MSI-X16:        NOT OKAY
-	[...]
-	MSI-X2047:      NOT OKAY
-	MSI-X2048:      NOT OKAY
-
-	Read Tests
-
-	SET IRQ TYPE TO MSI:            OKAY
-	READ (      1 bytes):           OKAY
-	READ (   1024 bytes):           OKAY
-	READ (   1025 bytes):           OKAY
-	READ (1024000 bytes):           OKAY
-	READ (1024001 bytes):           OKAY
-
-	Write Tests
-
-	WRITE (      1 bytes):          OKAY
-	WRITE (