Merge tag 'soc-newsoc-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull new SoC support from Arnd Bergmann:
 "These five newly supported chips come with both devicetree
  descriptions and the changes to wire them up to the build system for
  easier bisection.

  The chips in question are:

   - Marvell PXA1908 was the first 64-bit mobile phone chip from Marvell
     in the product line that started with the Digital StrongARM SA1100
     based PDAs and continued with the Intel PXA2xx that dominated early
     smartphones. This one only made it only into a few products before
     the entire product line was cut in 2015.

   - The QiLai SoC is made by RISC-V core designer Andes Technologies
     and is in the 'Voyager' reference board in MicroATX form factor. It
     uses four in-order AX45MP cores, which is the midrange product from
     Andes.

   - CIX P1 is one of the few Arm chips designed for small workstations,
     and this one uses 12 Cortex-A720/A520 cores, making it also one of
     the only ARMv9.2 machines that one can but at the moment.

   - Axiado AX3000 is an embedded chip with relative small Cortex-A53
     CPU cores described as a "Trusted Control/Compute Unit" that can be
     used as a BMC in servers. In addition to the usual I/O, this one
     comes with 10GBit ethernet and and a 4TOPS NPU.

   - Sophgo SG2000 is an embedded chip that comes with both RISC-V and
     Arm cores that can run Linux. This was already supported for RISC-V
     but now it also works on Arm

  One more chip, the Black Sesame C1200 did not make it in tirm for the
  merge window"

* tag 'soc-newsoc-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits)
  arm64: defconfig: Enable rudimentary Sophgo SG2000 support
  arm64: Add SOPHGO SOC family Kconfig support
  arm64: dts: sophgo: Add Duo Module 01 Evaluation Board
  arm64: dts: sophgo: Add Duo Module 01
  arm64: dts: sophgo: Add initial SG2000 SoC device tree
  MAINTAINERS: Add entry for Axiado
  arm64: defconfig: enable the Axiado family
  arm64: dts: axiado: Add initial support for AX3000 SoC and eval board
  arm64: add Axiado SoC family
  dt-bindings: i3c: cdns: add Axiado AX3000 I3C controller
  dt-bindings: serial: cdns: add Axiado AX3000 UART controller
  dt-bindings: gpio: cdns: add Axiado AX3000 GPIO variant
  dt-bindings: gpio: cdns: convert to YAML
  dt-bindings: arm: axiado: add AX3000 EVK compatible strings
  dt-bindings: vendor-prefixes: Add Axiado Corporation
  MAINTAINERS: Add CIX SoC maintainer entry
  arm64: dts: cix: Add sky1 base dts initial support
  dt-bindings: clock: cix: Add CIX sky1 scmi clock id
  arm64: defconfig: Enable CIX SoC
  mailbox: add CIX mailbox driver
  ...

42 files changed, 3428 insertions, 63 deletions

diff --git a/Documentation/devicetree/bindings/arm/axiado.yaml b/Documentation/devicetree/bindings/arm/axiado.yaml
new file mode 100644
index 000000000000..bfabe7b32e65
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/axiado.yaml
@@ -0,0 +1,23 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/axiado.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Axiado Platforms
+
+maintainers:
+  - Harshit Shah <hshah@axiado.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: AX3000 based boards
+        items:
+          - enum:
+              - axiado,ax3000-evk       # Axiado AX3000 Evaluation Board
+          - const: axiado,ax3000       # Axiado AX3000 SoC
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/cix.yaml b/Documentation/devicetree/bindings/arm/cix.yaml
new file mode 100644
index 000000000000..114dab4bc4d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/cix.yaml
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/cix.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CIX platforms
+
+maintainers:
+  - Peter Chen <peter.chen@cixtech.com>
+  - Fugang Duan <fugang.duan@cixtech.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: Radxa Orion O6
+        items:
+          - const: radxa,orion-o6
+          - const: cix,sky1
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml b/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml
index 4c43eaf3632e..f73bb8ec3a1a 100644
--- a/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml
+++ b/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml
@@ -35,6 +35,11 @@ properties:
           - enum:
               - dell,wyse-ariel
           - const: marvell,mmp3
+      - description: PXA1908 based boards
+        items:
+          - enum:
+              - samsung,coreprimevelte
+          - const: marvell,pxa1908
 
 additionalProperties: true
 
diff --git a/Documentation/devicetree/bindings/gpio/cdns,gpio.txt b/Documentation/devicetree/bindings/gpio/cdns,gpio.txt
deleted file mode 100644
index 706ef00f5c64..000000000000
--- a/Documentation/devicetree/bindings/gpio/cdns,gpio.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-Cadence GPIO controller bindings
-
-Required properties:
-- compatible: should be "cdns,gpio-r1p02".
-- reg: the register base address and size.
-- #gpio-cells: should be 2.
-	* first cell is the GPIO number.
-	* second cell specifies the GPIO flags, as defined in
-		<dt-bindings/gpio/gpio.h>. Only the GPIO_ACTIVE_HIGH
-		and GPIO_ACTIVE_LOW flags are supported.
-- gpio-controller: marks the device as a GPIO controller.
-- clocks: should contain one entry referencing the peripheral clock driving
-	the GPIO controller.
-
-Optional properties:
-- ngpios: integer number of gpio lines supported by this controller, up to 32.
-- interrupts: interrupt specifier for the controllers interrupt.
-- interrupt-controller: marks the device as an interrupt controller. When
-	defined, interrupts, interrupt-parent and #interrupt-cells
-	are required.
-- interrupt-cells: should be 2.
-	* first cell is the GPIO number you want to use as an IRQ source.
-	* second cell specifies the IRQ type, as defined in
-		<dt-bindings/interrupt-controller/irq.h>.
-		Currently only level sensitive IRQs are supported.
-
-
-Example:
-	gpio0: gpio-controller@fd060000 {
-		compatible = "cdns,gpio-r1p02";
-		reg =<0xfd060000 0x1000>;
-
-		clocks = <&gpio_clk>;
-
-		interrupt-parent = <&gic>;
-		interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/cdns,gpio.yaml b/Documentation/devicetree/bindings/gpio/cdns,gpio.yaml
new file mode 100644
index 000000000000..a84d60b39459
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/cdns,gpio.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/cdns,gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence GPIO Controller
+
+maintainers:
+  - Jan Kotas <jank@cadence.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: cdns,gpio-r1p02
+      - items:
+          - enum:
+              - axiado,ax3000-gpio
+          - const: cdns,gpio-r1p02
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  ngpios:
+    minimum: 1
+    maximum: 32
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      - First cell is the GPIO line number.
+      - Second cell is flags as defined in <dt-bindings/gpio/gpio.h>,
+        only GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW supported.
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+    description: |
+      - First cell is the GPIO line number used as IRQ.
+      - Second cell is the trigger type, as defined in
+        <dt-bindings/interrupt-controller/irq.h>.
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - gpio-controller
+  - "#gpio-cells"
+
+if:
+  required: [interrupt-controller]
+then:
+  required:
+    - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    gpio0: gpio-controller@fd060000 {
+        compatible = "cdns,gpio-r1p02";
+        reg = <0xfd060000 0x1000>;
+        clocks = <&gpio_clk>;
+
+        interrupt-parent = <&gic>;
+        interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml
index cad6d53d0e2e..6fa3078074d0 100644
--- a/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml
+++ b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml
@@ -14,7 +14,12 @@ allOf:
 
 properties:
   compatible:
-    const: cdns,i3c-master
+    oneOf:
+      - const: cdns,i3c-master
+      - items:
+          - enum:
+              - axiado,ax3000-i3c
+          - const: cdns,i3c-master
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/interrupt-controller/andestech,plicsw.yaml b/Documentation/devicetree/bindings/interrupt-controller/andestech,plicsw.yaml
new file mode 100644
index 000000000000..eb2eb611ac09
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/andestech,plicsw.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/andestech,plicsw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Andes machine-level software interrupt controller
+
+description:
+  In the Andes platform such as QiLai SoC, the PLIC module is instantiated a
+  second time with all interrupt sources tied to zero as the software interrupt
+  controller (PLIC_SW). PLIC_SW directly connects to the machine-mode
+  inter-processor interrupt lines of CPUs, so RISC-V per-CPU local interrupt
+  controller is the parent interrupt controller for PLIC_SW. PLIC_SW can
+  generate machine-mode inter-processor interrupts through programming its
+  registers.
+
+maintainers:
+  - Ben Zong-You Xie <ben717@andestech.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - andestech,qilai-plicsw
+      - const: andestech,plicsw
+
+  reg:
+    maxItems: 1
+
+  interrupts-extended:
+    minItems: 1
+    maxItems: 15872
+    description:
+      Specifies which harts are connected to the PLIC_SW. Each item must points
+      to a riscv,cpu-intc node, which has a riscv cpu node as parent.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts-extended
+
+examples:
+  - |
+    interrupt-controller@400000 {
+      compatible = "andestech,qilai-plicsw", "andestech,plicsw";
+      reg = <0x400000 0x400000>;
+      interrupts-extended = <&cpu0intc 3>,
+                            <&cpu1intc 3>,
+                            <&cpu2intc 3>,
+                            <&cpu3intc 3>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
index ffc4768bad06..5b827bc24301 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
@@ -53,6 +53,7 @@ properties:
     oneOf:
       - items:
           - enum:
+              - andestech,qilai-plic
               - renesas,r9a07g043-plic
           - const: andestech,nceplic100
       - items:
diff --git a/Documentation/devicetree/bindings/mailbox/cix,sky1-mbox.yaml b/Documentation/devicetree/bindings/mailbox/cix,sky1-mbox.yaml
new file mode 100644
index 000000000000..66d75b7bc8c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/cix,sky1-mbox.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/cix,sky1-mbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cixtech mailbox controller
+
+maintainers:
+  - Guomin Chen <Guomin.Chen@cixtech.com>
+
+description:
+  The Cixtech mailbox controller, used in the Cixtech Sky1 SoC,
+  is used for message transmission between multiple processors
+  within the SoC, such as the AP, PM, audio DSP, SensorHub MCU,
+  and others
+
+  Each Cixtech mailbox controller is unidirectional, so they are
+  typically used in pairs-one for receiving and one for transmitting.
+
+  Each Cixtech mailbox supports 11 channels with different transmission modes
+    channel 0-7 - Fast channel with 32bit transmit register and IRQ support
+    channel 8   - Doorbell mode,using the mailbox as an interrupt-generating
+                   mechanism.
+    channel 9   - Fifo based channel with 32*32bit depth fifo and IRQ support
+    channel 10  - Reg based channel with 32*32bit transmit register and
+                   Doorbell+transmit acknowledgment IRQ support
+
+  In the CIX Sky1 SoC use case, there are 4 pairs of mailbox controllers
+    AP <--> PM - using Doorbell transfer mode
+    AP <--> SE - using REG transfer mode
+    AP <--> DSP - using FIFO transfer mode
+    AP <--> SensorHub - using FIFO transfer mode
+
+properties:
+  compatible:
+    const: cix,sky1-mbox
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#mbox-cells":
+    const: 1
+
+  cix,mbox-dir:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Direction of the mailbox relative to the AP
+    enum: [tx, rx]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#mbox-cells"
+  - cix,mbox-dir
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mbox_ap2pm: mailbox@30000000 {
+            compatible = "cix,sky1-mbox";
+            reg = <0 0x30000000 0 0x10000>;
+            interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH 0>;
+            #mbox-cells = <1>;
+            cix,mbox-dir = "tx";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml b/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml
index 4869ddef36fd..e7c06032048a 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml
+++ b/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml
@@ -30,6 +30,26 @@ allOf:
           maxItems: 1
         reg-names:
           maxItems: 1
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mrvl,pxav1-mmc
+    then:
+      properties:
+        pinctrl-names:
+          description:
+            Optional for supporting PXA168 SDIO IRQ errata to switch CMD pin between
+            SDIO CMD and GPIO mode.
+          items:
+            - const: default
+            - const: state_cmd_gpio
+        pinctrl-0:
+          description:
+            Should contain default pinctrl.
+        pinctrl-1:
+          description:
+            Should switch CMD pin to GPIO mode as a high output.
 
 properties:
   compatible:
@@ -62,22 +82,6 @@ properties:
       - const: io
       - const: core
 
-  pinctrl-names:
-    description:
-      Optional for supporting PXA168 SDIO IRQ errata to switch CMD pin between
-      SDIO CMD and GPIO mode.
-    items:
-      - const: default
-      - const: state_cmd_gpio
-
-  pinctrl-0:
-    description:
-      Should contain default pinctrl.
-
-  pinctrl-1:
-    description:
-      Should switch CMD pin to GPIO mode as a high output.
-
   mrvl,clk-delay-cycles:
     description: Specify a number of cycles to delay for tuning.
     $ref: /schemas/types.yaml#/definitions/uint32
diff --git a/Documentation/devicetree/bindings/riscv/andes.yaml b/Documentation/devicetree/bindings/riscv/andes.yaml
new file mode 100644
index 000000000000..aa1edf1fdec7
--- /dev/null
+++ b/Documentation/devicetree/bindings/riscv/andes.yaml
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/riscv/andes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Andes SoC-based boards
+
+maintainers:
+  - Ben Zong-You Xie <ben717@andestech.com>
+
+description:
+  Andes SoC-based boards
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - andestech,voyager
+          - const: andestech,qilai
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
index d7f047b0bf24..9d3e5c1d8502 100644
--- a/Documentation/devicetree/bindings/serial/cdns,uart.yaml
+++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
@@ -16,9 +16,10 @@ properties:
         items:
           - const: xlnx,xuartps
           - const: cdns,uart-r1p8
-      - description: UART controller for Zynq Ultrascale+ MPSoC
-        items:
-          - const: xlnx,zynqmp-uart
+      - items:
+          - enum:
+              - axiado,ax3000-uart
+              - xlnx,zynqmp-uart
           - const: cdns,uart-r1p12
 
   reg:
diff --git a/Documentation/devicetree/bindings/timer/andestech,plmt0.yaml b/Documentation/devicetree/bindings/timer/andestech,plmt0.yaml
new file mode 100644
index 000000000000..90b612096004
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/andestech,plmt0.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/andestech,plmt0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Andes machine-level timer
+
+description:
+  The Andes machine-level timer device (PLMT0) provides machine-level timer
+  functionality for a set of HARTs on a RISC-V platform. It has a single
+  fixed-frequency monotonic time counter (MTIME) register and a time compare
+  register (MTIMECMP) for each HART connected to the PLMT0. A timer interrupt is
+  generated if MTIME >= MTIMECMP.
+
+maintainers:
+  - Ben Zong-You Xie <ben717@andestech.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - andestech,qilai-plmt
+      - const: andestech,plmt0
+
+  reg:
+    maxItems: 1
+
+  interrupts-extended:
+    minItems: 1
+    maxItems: 32
+    description:
+      Specifies which harts are connected to the PLMT0. Each item must points
+      to a riscv,cpu-intc node, which has a riscv cpu node as parent. The
+      PLMT0 supports 1 hart up to 32 harts.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts-extended
+
+examples:
+  - |
+    interrupt-controller@100000 {
+      compatible = "andestech,qilai-plmt", "andestech,plmt0";
+      reg = <0x100000 0x100000>;
+      interrupts-extended = <&cpu0intc 7>,
+                            <&cpu1intc 7>,
+                            <&cpu2intc 7>,
+                            <&cpu3intc 7>;
+    };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 85b1e3d38024..8af7622fcb59 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -203,6 +203,8 @@ patternProperties:
     description: Shanghai Awinic Technology Co., Ltd.
   "^axentia,.*":
     description: Axentia Technologies AB
+  "^axiado,.*":
+    description: Axiado Corporation
   "^axis,.*":
     description: Axis Communications AB
   "^azoteq,.*":
@@ -309,6 +311,8 @@ patternProperties:
     description: Cirrus Logic, Inc.
   "^cisco,.*":
     description: Cisco Systems, Inc.
+  "^cix,.*":
+    description: CIX Technology Group Co., Ltd.
   "^clockwork,.*":
     description: Clockwork Tech LLC
   "^cloos,.*":
diff --git a/MAINTAINERS b/MAINTAINERS
index 254ddd29b95a..0303d65510d8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2449,6 +2449,14 @@ F:	arch/arm/boot/dts/aspeed/
 F:	arch/arm/mach-aspeed/
 N:	aspeed
 
+ARM/AXIADO ARCHITECTURE
+M:	Harshit Shah <hshah@axiado.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	Documentation/devicetree/bindings/arm/axiado.yaml
+F:	arch/arm64/boot/dts/axiado/
+N:	axiado
+
 ARM/AXM LSI SOC
 M:	Krzysztof Kozlowski <krzk@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -2508,6 +2516,19 @@ F:	arch/arm/boot/compressed/misc-ep93xx.h
 F:	arch/arm/mach-ep93xx/
 F:	drivers/iio/adc/ep93xx_adc.c
 
+ARM/CIX SOC SUPPORT
+M:	Peter Chen <peter.chen@cixtech.com>
+M:	Fugang Duan <fugang.duan@cixtech.com>
+R:	CIX Linux Kernel Upstream Group <cix-kernel-upstream@cixtech.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/cix.git
+F:	Documentation/devicetree/bindings/arm/cix.yaml
+F:	Documentation/devicetree/bindings/mailbox/cix,sky1-mbox.yaml
+F:	arch/arm64/boot/dts/cix/
+F:	drivers/mailbox/cix-mailbox.c
+K:	\bcix\b
+
 ARM/CLKDEV SUPPORT
 M:	Russell King <linux@armlinux.org.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -2824,6 +2845,14 @@ F:	drivers/irqchip/irq-mvebu-*
 F:	drivers/pinctrl/mvebu/
 F:	drivers/rtc/rtc-armada38x.c
 
+ARM/Marvell PXA1908 SOC support
+M:	Duje Mihanović <duje@dujemihanovic.xyz>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm64/boot/dts/marvell/mmp/
+F:	driv