wifi: remove orphaned ray_cs driver

Aviator/Raytheon is an early PCMCIA driver, apparently predating 802.11b
and only supporting wireless extensions.

The driver has been orphaned since 2010 and only seen cosmetic updates
long before than. Jean Tourrilhes pointed out in a 2005 changelog that
he tested a change on actual hardware, which was apparently already
noteworthy back then.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>

8 files changed, 0 insertions, 3820 deletions

diff --git a/Documentation/networking/device_drivers/wifi/index.rst b/Documentation/networking/device_drivers/wifi/index.rst
index bf91a87c7acf..fb394f5de4a9 100644
--- a/Documentation/networking/device_drivers/wifi/index.rst
+++ b/Documentation/networking/device_drivers/wifi/index.rst
@@ -10,7 +10,6 @@ Contents:
 
    intel/ipw2100
    intel/ipw2200
-   ray_cs
 
 .. only::  subproject and html
 
diff --git a/Documentation/networking/device_drivers/wifi/ray_cs.rst b/Documentation/networking/device_drivers/wifi/ray_cs.rst
deleted file mode 100644
index 9a46d1ae8f20..000000000000
--- a/Documentation/networking/device_drivers/wifi/ray_cs.rst
+++ /dev/null
@@ -1,165 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-.. include:: <isonum.txt>
-
-=========================
-Raylink wireless LAN card
-=========================
-
-September 21, 1999
-
-Copyright |copy| 1998  Corey Thomas (corey@world.std.com)
-
-This file is the documentation for the Raylink Wireless LAN card driver for
-Linux.  The Raylink wireless LAN card is a PCMCIA card which provides IEEE
-802.11 compatible wireless network connectivity at 1 and 2 megabits/second.
-See http://www.raytheon.com/micro/raylink/ for more information on the Raylink
-card.  This driver is in early development and does have bugs.  See the known
-bugs and limitations at the end of this document for more information.
-This driver also works with WebGear's Aviator 2.4 and Aviator Pro
-wireless LAN cards.
-
-As of kernel 2.3.18, the ray_cs driver is part of the Linux kernel
-source.  My web page for the development of ray_cs is at
-http://web.ralinktech.com/ralink/Home/Support/Linux.html
-and I can be emailed at corey@world.std.com
-
-The kernel driver is based on ray_cs-1.62.tgz
-
-The driver at my web page is intended to be used as an add on to
-David Hinds pcmcia package.  All the command line parameters are
-available when compiled as a module.  When built into the kernel, only
-the essid= string parameter is available via the kernel command line.
-This will change after the method of sorting out parameters for all
-the PCMCIA drivers is agreed upon.  If you must have a built in driver
-with nondefault parameters, they can be edited in
-/usr/src/linux/drivers/net/pcmcia/ray_cs.c.  Searching for module_param
-will find them all.
-
-Information on card services is available at:
-
-	http://pcmcia-cs.sourceforge.net/
-
-
-Card services user programs are still required for PCMCIA devices.
-pcmcia-cs-3.1.1 or greater is required for the kernel version of
-the driver.
-
-Currently, ray_cs is not part of David Hinds card services package,
-so the following magic is required.
-
-At the end of the /etc/pcmcia/config.opts file, add the line:
-source ./ray_cs.opts
-This will make card services read the ray_cs.opts file
-when starting.  Create the file /etc/pcmcia/ray_cs.opts containing the
-following::
-
-  #### start of /etc/pcmcia/ray_cs.opts ###################
-  # Configuration options for Raylink Wireless LAN PCMCIA card
-  device "ray_cs"
-    class "network" module "misc/ray_cs"
-
-  card "RayLink PC Card WLAN Adapter"
-    manfid 0x01a6, 0x0000
-    bind "ray_cs"
-
-  module "misc/ray_cs" opts ""
-  #### end of /etc/pcmcia/ray_cs.opts #####################
-
-
-To join an existing network with
-different parameters, contact the network administrator for the
-configuration information, and edit /etc/pcmcia/ray_cs.opts.
-Add the parameters below between the empty quotes.
-
-Parameters for ray_cs driver which may be specified in ray_cs.opts:
-
-=============== =============== =============================================
-bc              integer         0 = normal mode (802.11 timing),
-				1 = slow down inter frame timing to allow
-				operation with older breezecom access
-				points.
-
-beacon_period	integer         beacon period in Kilo-microseconds,
-
-				legal values = must be integer multiple
-				of hop dwell
-
-				default = 256
-
-country         integer         1 = USA (default),
-				2 = Europe,
-				3 = Japan,
-				4 = Korea,
-				5 = Spain,
-				6 = France,
-				7 = Israel,
-				8 = Australia
-
-essid		string		ESS ID - network name to join
-
-				string with maximum length of 32 chars
-				default value = "ADHOC_ESSID"
-
-hop_dwell	integer         hop dwell time in Kilo-microseconds
-
-				legal values = 16,32,64,128(default),256
-
-irq_mask	integer         linux standard 16 bit value 1bit/IRQ
-
-				lsb is IRQ 0, bit 1 is IRQ 1 etc.
-				Used to restrict choice of IRQ's to use.
-				Recommended method for controlling
-				interrupts is in /etc/pcmcia/config.opts
-
-net_type	integer		0 (default) = adhoc network,
-				1 = infrastructure
-
-phy_addr	string          string containing new MAC address in
-				hex, must start with x eg
-				x00008f123456
-
-psm		integer         0 = continuously active,
-				1 = power save mode (not useful yet)
-
-pc_debug	integer		(0-5) larger values for more verbose
-				logging.  Replaces ray_debug.
-
-ray_debug	integer		Replaced with pc_debug
-
-ray_mem_speed   integer         defaults to 500
-
-sniffer         integer         0 = not sniffer (default),
-				1 = sniffer which can be used to record all
-				network traffic using tcpdump or similar,
-				but no normal network use is allowed.
-
-translate	integer		0 = no translation (encapsulate frames),
-				1 = translation    (RFC1042/802.1)
-=============== =============== =============================================
-
-More on sniffer mode:
-
-tcpdump does not understand 802.11 headers, so it can't
-interpret the contents, but it can record to a file.  This is only
-useful for debugging 802.11 lowlevel protocols that are not visible to
-linux.  If you want to watch ftp xfers, or do similar things, you
-don't need to use sniffer mode.  Also, some packet types are never
-sent up by the card, so you will never see them (ack, rts, cts, probe
-etc.)  There is a simple program (showcap) included in the ray_cs
-package which parses the 802.11 headers.
-
-Known Problems and missing features
-
-	Does not work with non x86
-
-	Does not work with SMP
-
-	Support for defragmenting frames is not yet debugged, and in
-	fact is known to not work.  I have never encountered a net set
-	up to fragment, but still, it should be fixed.
-
-	The ioctl support is incomplete.  The hardware address cannot be set
-	using ifconfig yet.  If a different hardware address is needed, it may
-	be set using the phy_addr parameter in ray_cs.opts.  This requires
-	a card insertion to take effect.
diff --git a/MAINTAINERS b/MAINTAINERS
index 161bf9d89535..91eacd4ecc9f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17961,11 +17961,6 @@ F:	drivers/ras/
 F:	include/linux/ras.h
 F:	include/ras/ras_event.h
 
-RAYLINK/WEBGEAR 802.11 WIRELESS LAN DRIVER
-L:	linux-wireless@vger.kernel.org
-S:	Orphan
-F:	drivers/net/wireless/legacy/ray*
-
 RC-CORE / LIRC FRAMEWORK
 M:	Sean Young <sean@mess.org>
 L:	linux-media@vger.kernel.org
diff --git a/drivers/net/wireless/legacy/Kconfig b/drivers/net/wireless/legacy/Kconfig
index 3a5275941212..1d77d53d6440 100644
--- a/drivers/net/wireless/legacy/Kconfig
+++ b/drivers/net/wireless/legacy/Kconfig
@@ -1,19 +1,3 @@
-config PCMCIA_RAYCS
-	tristate "Aviator/Raytheon 2.4GHz wireless support"
-	depends on PCMCIA
-	select WIRELESS_EXT
-	select WEXT_SPY
-	select WEXT_PRIV
-	help
-	  Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
-	  (PC-card) wireless Ethernet networking card to your computer.
-	  Please read the file
-	  <file:Documentation/networking/device_drivers/wifi/ray_cs.rst> for
-	  details.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called ray_cs.  If unsure, say N.
-
 config PCMCIA_WL3501
 	tristate "Planet WL3501 PCMCIA cards"
 	depends on CFG80211 && PCMCIA
diff --git a/drivers/net/wireless/legacy/Makefile b/drivers/net/wireless/legacy/Makefile
index 36878f080bfc..d8705ccc5cf5 100644
--- a/drivers/net/wireless/legacy/Makefile
+++ b/drivers/net/wireless/legacy/Makefile
@@ -1,5 +1,4 @@
 # 16-bit wireless PCMCIA client drivers
-obj-$(CONFIG_PCMCIA_RAYCS)	+= ray_cs.o
 obj-$(CONFIG_PCMCIA_WL3501)	+= wl3501_cs.o
 
 obj-$(CONFIG_USB_NET_RNDIS_WLAN)	+= rndis_wlan.o
diff --git a/drivers/net/wireless/legacy/ray_cs.c b/drivers/net/wireless/legacy/ray_cs.c
deleted file mode 100644
index c95a79e01cd0..000000000000
--- a/drivers/net/wireless/legacy/ray_cs.c
+++ /dev/null
@@ -1,2824 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*=============================================================================
- *
- * A  PCMCIA client driver for the Raylink wireless LAN card.
- * The starting point for this module was the skeleton.c in the
- * PCMCIA 2.9.12 package written by David Hinds, dahinds@users.sourceforge.net
- *
- * Copyright (c) 1998  Corey Thomas (corey@world.std.com)
- *
- * Changes:
- * Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 08/08/2000
- * - reorganize kmallocs in ray_attach, checking all for failure
- *   and releasing the previous allocations if one fails
- *
- * Daniele Bellucci <bellucda@tiscali.it> - 07/10/2003
- * - Audit copy_to_user in ioctl(SIOCGIWESSID)
- *
-=============================================================================*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/proc_fs.h>
-#include <linux/ptrace.h>
-#include <linux/seq_file.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/if_arp.h>
-#include <linux/ioport.h>
-#include <linux/skbuff.h>
-#include <linux/ieee80211.h>
-
-#include <pcmcia/cistpl.h>
-#include <pcmcia/cisreg.h>
-#include <pcmcia/ds.h>
-
-#include <linux/wireless.h>
-#include <net/iw_handler.h>
-
-#include <asm/io.h>
-#include <asm/byteorder.h>
-#include <linux/uaccess.h>
-
-/* Warning : these stuff will slow down the driver... */
-#define WIRELESS_SPY		/* Enable spying addresses */
-/* Definitions we need for spy */
-typedef struct iw_statistics iw_stats;
-typedef u_char mac_addr[ETH_ALEN];	/* Hardware address */
-
-#include "rayctl.h"
-#include "ray_cs.h"
-
-
-/** Prototypes based on PCMCIA skeleton driver *******************************/
-static int ray_config(struct pcmcia_device *link);
-static void ray_release(struct pcmcia_device *link);
-static void ray_detach(struct pcmcia_device *p_dev);
-
-/***** Prototypes indicated by device structure ******************************/
-static int ray_dev_close(struct net_device *dev);
-static int ray_dev_config(struct net_device *dev, struct ifmap *map);
-static struct net_device_stats *ray_get_stats(struct net_device *dev);
-static int ray_dev_init(struct net_device *dev);
-
-static int ray_open(struct net_device *dev);
-static netdev_tx_t ray_dev_start_xmit(struct sk_buff *skb,
-					    struct net_device *dev);
-static void set_multicast_list(struct net_device *dev);
-static void ray_update_multi_list(struct net_device *dev, int all);
-static int translate_frame(ray_dev_t *local, struct tx_msg __iomem *ptx,
-			   unsigned char *data, int len);
-static void ray_build_header(ray_dev_t *local, struct tx_msg __iomem *ptx,
-			     UCHAR msg_type, unsigned char *data);
-static void untranslate(ray_dev_t *local, struct sk_buff *skb, int len);
-static iw_stats *ray_get_wireless_stats(struct net_device *dev);
-static const struct iw_handler_def ray_handler_def;
-
-/***** Prototypes for raylink functions **************************************/
-static void authenticate(ray_dev_t *local);
-static int build_auth_frame(ray_dev_t *local, UCHAR *dest, int auth_type);
-static void authenticate_timeout(struct timer_list *t);
-static int get_free_ccs(ray_dev_t *local);
-static int get_free_tx_ccs(ray_dev_t *local);
-static void init_startup_params(ray_dev_t *local);
-static int parse_addr(char *in_str, UCHAR *out);
-static int ray_hw_xmit(unsigned char *data, int len, struct net_device *dev, UCHAR type);
-static int ray_init(struct net_device *dev);
-static int interrupt_ecf(ray_dev_t *local, int ccs);
-static void ray_reset(struct net_device *dev);
-static void ray_update_parm(struct net_device *dev, UCHAR objid, UCHAR *value, int len);
-static void verify_dl_startup(struct timer_list *t);
-
-/* Prototypes for interrpt time functions **********************************/
-static irqreturn_t ray_interrupt(int reg, void *dev_id);
-static void clear_interrupt(ray_dev_t *local);
-static void rx_deauthenticate(ray_dev_t *local, struct rcs __iomem *prcs,
-			      unsigned int pkt_addr, int rx_len);
-static int copy_from_rx_buff(ray_dev_t *local, UCHAR *dest, int pkt_addr, int len);
-static void ray_rx(struct net_device *dev, ray_dev_t *local, struct rcs __iomem *prcs);
-static void release_frag_chain(ray_dev_t *local, struct rcs __iomem *prcs);
-static void rx_authenticate(ray_dev_t *local, struct rcs __iomem *prcs,
-			    unsigned int pkt_addr, int rx_len);
-static void rx_data(struct net_device *dev, struct rcs __iomem *prcs,
-		    unsigned int pkt_addr, int rx_len);
-static void associate(ray_dev_t *local);
-
-/* Card command functions */
-static int dl_startup_params(struct net_device *dev);
-static void join_net(struct timer_list *t);
-static void start_net(struct timer_list *t);
-
-/*===========================================================================*/
-/* Parameters that can be set with 'insmod' */
-
-/* ADHOC=0, Infrastructure=1 */
-static int net_type = ADHOC;
-
-/* Hop dwell time in Kus (1024 us units defined by 802.11) */
-static int hop_dwell = 128;
-
-/* Beacon period in Kus */
-static int beacon_period = 256;
-
-/* power save mode (0 = off, 1 = save power) */
-static int psm;
-
-/* String for network's Extended Service Set ID. 32 Characters max */
-static char *essid;
-
-/* Default to encapsulation unless translation requested */
-static bool translate = true;
-
-static int country = USA;
-
-static int sniffer;
-
-static int bc;
-
-/* 48 bit physical card address if overriding card's real physical
- * address is required.  Since IEEE 802.11 addresses are 48 bits
- * like ethernet, an int can't be used, so a string is used. To
- * allow use of addresses starting with a decimal digit, the first
- * character must be a letter and will be ignored. This letter is
- * followed by up to 12 hex digits which are the address.  If less
- * than 12 digits are used, the address will be left filled with 0's.
- * Note that bit 0 of the first byte is the broadcast bit, and evil
- * things will happen if it is not 0 in a card address.
- */
-static char *phy_addr = NULL;
-
-static unsigned int ray_mem_speed = 500;
-
-/* WARNING: THIS DRIVER IS NOT CAPABLE OF HANDLING MULTIPLE DEVICES! */
-static struct pcmcia_device *this_device = NULL;
-
-MODULE_AUTHOR("Corey Thomas <corey@world.std.com>");
-MODULE_DESCRIPTION("Raylink/WebGear wireless LAN driver");
-MODULE_LICENSE("GPL");
-
-module_param(net_type, int, 0);
-module_param(hop_dwell, int, 0);
-module_param(beacon_period, int, 0);
-module_param(psm, int, 0);
-module_param(essid, charp, 0);
-module_param(translate, bool, 0);
-module_param(country, int, 0);
-module_param(sniffer, int, 0);
-module_param(bc, int, 0);
-module_param(phy_addr, charp, 0);
-module_param(ray_mem_speed, int, 0);
-
-static const UCHAR b5_default_startup_parms[] = {
-	0, 0,			/* Adhoc station */
-	'L', 'I', 'N', 'U', 'X', 0, 0, 0,	/* 32 char ESSID */
-	0, 0, 0, 0, 0, 0, 0, 0,
-	0, 0, 0, 0, 0, 0, 0, 0,
-	0, 0, 0, 0, 0, 0, 0, 0,
-	1, 0,			/* Active scan, CA Mode */
-	0, 0, 0, 0, 0, 0,	/* No default MAC addr  */
-	0x7f, 0xff,		/* Frag threshold */
-	0x00, 0x80,		/* Hop time 128 Kus */
-	0x01, 0x00,		/* Beacon period 256 Kus */
-	0x01, 0x07, 0xa3,	/* DTIM, retries, ack timeout */
-	0x1d, 0x82, 0x4e,	/* SIFS, DIFS, PIFS */
-	0x7f, 0xff,		/* RTS threshold */
-	0x04, 0xe2, 0x38, 0xA4,	/* scan_dwell, max_scan_dwell */
-	0x05,			/* assoc resp timeout thresh */
-	0x08, 0x02, 0x08,	/* adhoc, infra, super cycle max */
-	0,			/* Promiscuous mode */
-	0x0c, 0x0bd,		/* Unique word */
-	0x32,			/* Slot time */
-	0xff, 0xff,		/* roam-low snr, low snr count */
-	0x05, 0xff,		/* Infra, adhoc missed bcn thresh */
-	0x01, 0x0b, 0x4f,	/* USA, hop pattern, hop pat length */
-/* b4 - b5 differences start here */
-	0x00, 0x3f,		/* CW max */
-	0x00, 0x0f,		/* CW min */
-	0x04, 0x08,		/* Noise gain, limit offset */
-	0x28, 0x28,		/* det rssi, med busy offsets */
-	7,			/* det sync thresh */
-	0, 2, 2,		/* test mode, min, max */
-	0,			/* allow broadcast SSID probe resp */
-	0, 0,			/* privacy must start, can join */
-	2, 0, 0, 0, 0, 0, 0, 0	/* basic rate set */
-};
-
-static const UCHAR b4_default_startup_parms[] = {
-	0, 0,			/* Adhoc station */
-	'L', 'I', 'N', 'U', 'X', 0, 0, 0,	/* 32 char ESSID */
-	0, 0, 0, 0, 0, 0, 0, 0,
-	0, 0, 0, 0, 0, 0, 0, 0,
-	0, 0, 0, 0, 0, 0, 0, 0,
-	1, 0,			/* Active scan, CA Mode */
-	0, 0, 0, 0, 0, 0,	/* No default MAC addr  */
-	0x7f, 0xff,		/* Frag threshold */
-	0x02, 0x00,		/* Hop time */
-	0x00, 0x01,		/* Beacon period */
-	0x01, 0x07, 0xa3,	/* DTIM, retries, ack timeout */
-	0x1d, 0x82, 0xce,	/* SIFS, DIFS, PIFS */
-	0x7f, 0xff,		/* RTS threshold */
-	0xfb, 0x1e, 0xc7, 0x5c,	/* scan_dwell, max_scan_dwell */
-	0x05,			/* assoc resp timeout thresh */
-	0x04, 0x02, 0x4,	/* adhoc, infra, super cycle max */
-	0,			/* Promiscuous mode */
-	0x0c, 0x0bd,		/* Unique word */
-	0x4e,			/* Slot time (TBD seems wrong) */
-	0xff, 0xff,		/* roam-low snr, low snr count */
-	0x05, 0xff,		/* Infra, adhoc missed bcn thresh */
-	0x01, 0x0b, 0x4e,	/* USA, hop pattern, hop pat length */
-/* b4 - b5 differences start here */
-	0x3f, 0x0f,		/* CW max, min */
-	0x04, 0x08,		/* Noise gain, limit offset */
-	0x28, 0x28,		/* det rssi, med busy offsets */
-	7,			/* det sync thresh */
-	0, 2, 2,		/* test mode, min, max */
-	0,			/* rx/tx delay */
-	0, 0, 0, 0, 0, 0,	/* current BSS id */
-	0			/* hop set */
-};
-
-/*===========================================================================*/
-static const u8 eth2_llc[] = { 0xaa, 0xaa, 3, 0, 0, 0 };
-
-static const char hop_pattern_length[] = { 1,
-	USA_HOP_MOD, EUROPE_HOP_MOD,
-	JAPAN_HOP_MOD, KOREA_HOP_MOD,
-	SPAIN_HOP_MOD, FRANCE_HOP_MOD,
-	ISRAEL_HOP_MOD, AUSTRALIA_HOP_MOD,
-	JAPAN_TEST_HOP_MOD
-};
-
-static const char rcsid[] =
-    "Raylink/WebGear wireless LAN - Corey <Thomas corey@world.std.com>";
-
-static const struct net_device_ops ray_netdev_ops = {
-	.ndo_init 		= ray_dev_init,
-	.ndo_open 		= ray_open,
-	.ndo_stop 		= ray_dev_close,
-	.ndo_start_xmit		= ray_dev_start_xmit,
-	.ndo_set_config		= ray_dev_config,
-	.ndo_get_stats		= ray_get_stats,
-	.ndo_set_rx_mode	= set_multicast_list,
-	.ndo_set_mac_address 	= eth_mac_addr,
-	.ndo_validate_addr	= eth_validate_addr,
-};
-
-static int ray_probe(struct pcmcia_device *p_dev)
-{
-	ray_dev_t *local;
-	struct net_device *dev;
-	int ret;
-
-	dev_dbg(&p_dev->dev, "ray_attach()\n");
-
-	/* Allocate space for private device-specific data */
-	dev = alloc_etherdev(sizeof(ray_dev_t));
-	if (!dev)
-		return -ENOMEM;
-
-	local = netdev_priv(dev);
-	local->finder = p_dev;
-
-	/* The io structure describes IO port mapping. None used here */
-	p_dev->resource[0]->end = 0;
-	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
-
-	/* General socket configuration */
-	p_dev->config_flags |= CONF_ENABLE_IRQ;
-	p_dev->config_index = 1;
-
-	p_dev->priv = dev;
-
-	local->finder = p_dev;
-	local->card_status = CARD_INSERTED;
-	local->authentication_state = UNAUTHENTICATED;
-	local->num_multi = 0;
-	dev_dbg(&p_dev->dev, "ray_attach p_dev = %p,  dev = %p,  local = %p, intr = %p\n",
-	      p_dev, dev, local, &ray_interrupt);
-
-	/* Raylink entries in the device structure */
-	dev->netdev_ops = &ray_netdev_ops;
-	dev->wireless_handlers = &ray_handler_def;
-#ifdef WIRELESS_SPY
-	local->wireless_data.spy_data = &local->spy_data;
-	dev->wireless_data = &local->wireless_data;
-#endif /* WIRELESS_SPY */
-
-
-	dev_dbg(&p_dev->dev, "ray_cs ray_attach calling ether_setup.)\n");
-	netif_stop_queue(dev);
-
-	timer_setup(&local->timer, NULL, 0);
-
-	this_device = p_dev;
-	ret = ray_config(p_dev);
-	if (ret)
-		goto err_free_dev;
-
-	return 0;
-
-err_free_dev:
-	free_netdev(dev);
-	return ret;
-}
-
-static void ray_detach(struct pcmcia_device *link)
-{
-	struct net_device *dev;
-
-	dev_dbg(&link->dev, "ray_detach\n");
-
-	this_device = NULL;
-	dev = link->priv;
-
-	ray_release(link);
-
-	if (link->priv) {
-		unregister_netdev(dev);
-		free_netdev(dev);
-	}
-	dev_dbg(&link->dev, "ray_cs ray_detach ending\n");
-} /* ray_detach */
-
-#define MAX_TUPLE_SIZE 128
-static int ray_config(struct pcmcia_device *link)
-{
-	int ret = 0;
-	int i;
-	struct net_device *dev = link->priv;
-	ray_dev_t *local = netdev_priv(dev);
-
-	dev_dbg(&link->dev, "ray_config\n");
-
-	/* Determine card type and firmware version */
-	printk(KERN_INFO "ray_cs Detected: %s%s%s%s\n",
-	       link->prod_id[0] ? link->prod_id[0] : " ",
-	       link->prod_id[1] ? link->prod_id[1] : " ",
-	       link->prod_id[2] ? link->prod_id[2] : " ",
-	       link->prod_id[3] ? link->prod_id[3] : " ");
-
-	/* Now allocate an interrupt line.  Note that this does not
-	   actually assign a handler to the interrupt.
-	 */
-	ret = pcmcia_request_irq(link, ray_interrupt);
-	if (ret)
-		goto failed;
-	dev->irq = link->irq;
-
-	ret = pcmcia_enable_device(link);
-	if (ret)
-		goto failed;
-
-/*** Set up 32k window for shared memory (transmit and control) ************/
-	link->resource[2]->flags |= WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_USE_WAIT;
-	link->resource[2]->start = 0;
-	link->resource[2]->end = 0x8000;
-	ret = pcmcia_request_window(link, link->resource[2], ray_mem_speed);
-	if (ret)
-		goto failed;
-	ret = pcmcia_map_mem_page(link, link->resource[2], 0);
-	if (ret)
-		goto failed;
-	local->sram = ioremap(link->resource[2]->start,
-			resource_size(link->resource[2]));
-	if (!local->sram)
-		goto failed;
-
-/*** Set up 16k window for shared memory (receive buffer) ***************/
-	link->resource[3]->flags |=
-	    WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_USE_WAIT;
-	link->resource[3]->start = 0;
-	link->resource[3]->end = 0x4000;
-	ret = pcmcia_request_window(link, link->resource[3], ray_mem_speed);
-	if (ret)
-		goto failed;
-	ret = pcmcia_map_mem_page(link, link->resource[3], 0x8000);
-	if (ret)
-		goto failed;
-	local->rmem = ioremap(link->resource[3]->start,
-			resource_size(link->resource[3]));
-	if (!local->rmem)
-		goto failed;
-
-/*** Set up window for attribute memory ***********************************/
-	link->resource[4]->flags |=
-	    WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_AM | WIN_ENABLE | WIN_USE_WAIT;
-	link->resource[4]->start = 0;
-	link->resource[4]->end = 0x1000;
-	ret = pcmcia_request_window(link, link->resource[4], ray_mem_speed);
-	if (ret)
-		goto failed;
-	ret = pcmcia_map_mem_page(link, link->resource[4], 0);
-	if (ret)
-		goto failed;
-	local->amem = ioremap(link->resource[4]->start,
-			resource_size(link->resource[4]));
-	if (!local->amem)
-		goto failed;
-
-	dev_dbg(&link->dev, "ray_config sram=%p\n", local->sram);
-	dev_dbg(&link->dev, "ray_config rmem=%p\n", local->rmem);
-	dev_dbg(&link->dev, "ray_config amem=%p\n", local->amem);
-	if (ray_init(dev) < 0) {
-		ray_release(link);
-		return -ENODEV;
-	}
-
-	SET_NETDEV_DEV(dev, &link->dev);
-	i = register_netdev(dev);
-	if (i != 0) {
-		printk("ray_config register_netdev() failed\n");
-		ray_release(link);
-		return i;
-	}
-
-	printk(KERN_INFO "%s: RayLink, irq %d, hw_addr %pM\n",
-	       dev->name, dev->irq, dev->dev_addr);
-
-	return 0;
-
-failed:
-	ray_release(link);
-	return -ENODEV;
-} /* ray_config */
-
-static inline struct ccs __iomem *ccs_base(ray_dev_t *dev)
-{
-	return dev->sram + CCS_BASE;
-}
-
-static inline struct rcs __iomem *rcs_base(ray_dev_t *dev)
-{
-	/*
-	 * This looks nonsensical, since there is a separate
-	 * RCS_BASE. But the difference between a "struct rcs"
-	 * and a "struct ccs" ends up being in the _index_ off
-	 * the base, so the base pointer is the same for both
-	 * ccs/rcs.
-	 */
-	return dev->sram + CCS_BASE;
-}
-
-/*===========================================================================*/
-static int ray_init(struct net_device *dev)
-{
-	int i;
-	struct ccs __iomem *pccs;
-	ray_dev_t *local = netdev_priv(dev);
-	struct pcmcia_device *link = local->finder;
-	dev_dbg(&link->dev, "ray_init(0x%p)\n", dev);
-	if (!(pcmcia_dev_present(link))) {
-		dev_dbg(&link->dev, "ray_init - device not present\n");
-		return -1;
-	}
-
-	local->net_type = net_type;
-	local->sta_type = TYPE_STA;
-
-	/* Copy the startup results to local memory */
-	memcpy_fromio(&local->startup_res, local->sram + ECF_TO_HOST_BASE,
-		      sizeof(struct startup_res_6));
-
-	/* Check Power up test status and get mac address from card */
-	if (local->startup_res.startup_word != 0x80) {
-		printk(KERN_INFO "ray_init ERROR card status = %2x\n",
-		       local->startup_res.startup_word);
-		local->card_status = CARD_INIT_ERROR;
-		return -1;
-	}
-
-	local->fw_ver = local->startup_res.firmware_version[0];
-	local->fw_bld = local->startup_res.firmware_version[1];
-	local->fw_var = local->startup_res.firmware_version[2];
-	dev_dbg(&link->dev, "ray_init firmware version %d.%d\n", local->fw_ver,
-	      local->fw_bld);
-
-	local->tib_length = 0x20;
-	if ((local->fw_ver == 5) && (local->fw_bld >= 30))
-		local->tib_length = local->startup_res.tib_length;
-	dev_dbg(&link->dev, "ray_init tib_length = 0x%02x\n", local->tib_length);
-	/* Initialize CCS's to buffer free state */
-	pccs = ccs_base(local);
-	for (i = 0; i < NUMBER_OF_CCS; i++) {
-		writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
-	}
-	init_startup_params(local);
-
-	/* copy mac address to startup parameters */
-	if (!parse_addr(phy_addr, local->sparm.b4.a_mac_addr)) {
-		memcpy(&local->sparm.b4.a_mac_addr,
-		       &local->startup_res.station_addr, ADDRLEN);
-	}
-
-	clear_interrupt(local);	/* Clear any interrupt from the card */
-	local->card_status = CARD_AWAITING_PARAM;
-	dev_dbg(&link->dev, "ray_init ending\n");
-	return 0;
-} /* ray_init */
-
-/*===========================================================================*/
-/* Download startup parameters to the card and command it to read them       */
-static int dl_startup_params(struct net_device *dev)
-{
-	int ccsindex;
-	ray_dev_t *local = netdev_priv(dev);
-	struct ccs __iomem *pccs;
-	struct pcmcia_device *link = local->finder;
-
-	dev_dbg(&link->dev, "dl_startup_params entered\n");
-	if (!(pcmcia_dev_present(link))) {
-		dev_dbg(&link->dev, "ray_cs dl_startup_params - device not present\n");
-		return -1;
-	}
-
-	/* Copy parameters to host to ECF area */
-	if (local->fw_ver == 0x55)
-		memcpy_toio(local->sram + HOST_TO_ECF_BASE, &local->sparm.b4,
-			    sizeof(struct b4_startup_params));
-	else
-		memcpy_toio(local->sram + HOST_TO_ECF_BASE, &local->sparm.b5,
-			    sizeof(struct b5_startup_params));
-
-	/* Fill in the CCS fields for the ECF */
-	if ((ccsindex = get_free_ccs(local)) < 0)
-		return -1;
-	local->dl_param_ccs = ccsindex;
-	pccs = ccs_base(local) + ccsindex;
-	writeb(CCS_DOWNLOAD_STARTUP_PARAMS, &pccs->cmd);
-	dev_dbg(&link->dev, "dl_startup_params start ccsindex = %d\n",
-	      local->dl_param_ccs);
-	/* Interrupt the firmware to process the command */
-	if (interrupt_ecf(local, ccsindex)) {
-		printk(KERN_INFO "ray dl_startup_params failed - "
-		       "ECF not ready for intr\n");
-		local->card_status = CARD_DL_PARAM_ERROR;
-		writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
-		return -2;
-	}
-	local->card_status = CARD_DL_PARAM;
-	/* Start kernel timer to wait for dl startup to complete. */
-	local->timer.expires = jiffies + HZ / 2;
-	local->timer.function = verify_dl_startup;
-	add_timer(&local->timer);
-	dev_dbg(&link->dev,
-	      "ray_cs dl_startup_params started timer for verify_dl_startup\n");
-	return 0;
-} /* dl_startup_params */
-
-/*===========================================================================*/
-static void init_startup_params(ray_dev_t *local)
-{
-	int i;
-
-	if (country > JAPAN_TEST)
-		country = USA;
-	else if (country < USA)
-		country = USA;
-	/* structure for hop time and beacon period is defined here using
-	 * New 802.11D6.1 format.  Card firmware is still using old format
-	 * until version 6.
-	 *    Before                    After
-	 *    a_hop_time ms byte        a_hop_time ms byte
-	 *    a_hop_time 2s byte        a_hop_time ls byte
-	 *    a_hop_time ls byte        a_beacon_period ms byte
-	 *    a_beacon_period           a_beacon_period ls byte
-	 *
-	 *    a_hop_time = uS           a_hop_time = KuS
-	 *    a_beacon_period = hops    a_beacon_period = KuS
-	 *//* 64ms = 010000 */
-	if (local->fw_ver == 0x55) {
-		memcpy(&local->sparm.b4, b4_default_startup_parms,
-		       sizeof(struct b4_startup_params));
-		/* Translate sane kus input values to old build 4/5 format */
-		/* i = hop time in uS truncated to 3 bytes */
-		i = (hop_dwell * 1024) & 0xffffff;
-		local->sparm.b4.a_hop_time[0] = (i >> 16) & 0xff;
-		local->sparm.b4.a_hop_time[1] = (i >> 8) & 0xff;
-		local->sparm.b4.a_beacon_period[0] = 0;
-		local->sparm.b4.a_beacon_period[1] =
-		    ((beacon_period / hop_dwell) - 1) & 0xff;
-		local->sparm.b4.a_curr_country_code = country;
-		local->sparm.b4.a_hop_pattern_length =
-		    hop_pattern_length[(int)country] - 1;
-		if (bc) {
-			local->sparm.b4.a_ack_timeout = 0x50;
-			local->sparm.b4.a_sifs = 0x3f;
-		}
-	} else { /* Version 5 uses real kus values */
-		memcpy((UCHAR *) &local->sparm.b5, b5_default_startup_parms,
-		       sizeof(struct b5_startup_params));
-
-		local->sparm.b5.a_hop_time[0] = (hop_dwell >> 8) & 0xff;
-		local->sparm.b5.a_hop_time[1] = hop_dwell & 0xff;
-		local->sparm.b5.a_beacon_period[0] =
-		    (beacon_period >> 8) & 0xff;
-		local->sparm.b5.a_beacon_period[1] = beacon_period & 0xff;
-		if (psm)
-			local->sparm.b5.a_power_mgt_state = 1;
-		local->sparm.b5.a_curr_country_code = country;
-		local->sparm.b5.a_hop_pattern_length =
-		    hop_pattern_length[(int)country];
-	}
-
-	local->sparm.b4.a_network_type = net_type & 0x01;
-	local->sparm.b4.a_acting_as_ap_status = TYPE_STA;
-
-	if (essid != NULL)
-		strscpy(local->sparm.b4.a_current_ess_id, essid, ESSID_SIZE);
-} /* init_startup_params */
-
-/*===========================================================================*/
-static void verify_dl_startup(struct timer_list *t)
-{
-	ray_dev_t *local = from_timer(local, t, timer);
-	struct ccs __iomem *pccs = ccs_base(local) + local->dl_param_ccs;
-	UCHAR status;
-	struct pcmcia_device *link = local->finder;
-
-	if (!(pcmcia_dev_present(link))) {
-		dev_dbg(&link->dev, "ray_cs verify_dl_startup - device not present\n");
-		return;
-	}
-#if 0
-	{
-		int i;
-		printk(KERN_DEBUG
-		       "verify_dl_startup parameters sent via ccs %d:\n",
-		       local->dl_param_ccs);
-		for (i = 0; i < sizeof(struct b5_startup_params); i++) {
-			printk(" %2x",
-			       (unsigned int)readb(local->sram +
-						   HOST_TO_ECF_BASE + i));
-		}
-		printk("\n");
-	}
-#endif
-
-	status = readb(&pccs->buffer_status);
-	if (status != CCS_BUFFER_FREE) {
-		printk(KERN_INFO
-		       "Download startup params failed.  Status = %d\n",
-		       status);
-		local->card_status = CARD_DL_PARAM_ERROR;
-		return;
-	}
-	if (local->sparm.b4.a_network_type == ADHOC)
-		start_net(&local->timer);
-	else
-		join_net(&local->timer);
-} /* end verify_dl_startup */
-
-/*===========================================================================*/
-/* Command card to start a network */
-static void start_net(struct timer_list *t)
-{
-	ray_dev_t *local = from_timer(local, t, timer);
-	struct ccs __iomem *pccs;
-	int ccsindex;
-	struct pcmcia_device *link = local->finder;
-	if (!(pcmcia_dev_present(link))) {
-		dev_dbg(&link->dev, "ray_cs start_net - device not present\n");
-		return;
-	}
-	/* Fill in the CCS fields for the ECF */
-	if ((ccsindex = get_free_ccs(local)) < 0)
-		return;
-	pccs = ccs_base(local) + ccsindex;
-	writeb(CCS_START_NETWORK, &pccs->cmd);
-	writeb(0, &pccs->var.start_network.update_param);
-	/* Interrupt the firmware to process the command */
-	if (interrupt_ecf(local, ccsindex)) {
-		dev_dbg(&link->dev, "ray start net failed - card not ready for intr\n");
-		writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
-		return;
-	}
-	local->card_status = CARD_DOING_ACQ;
-} /* end start_net */
-