Merge tag 'leds-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds

Pull LED updates from Lee Jones:
 "This submission is a mix of new features, a number of fixes, some
  clean-up/refactoring and a few Device Tree binding updates. The most
  significant changes include new device support for the IS31FL3236A and
  QNAP's status LEDs, a number of fixes for the Qualcomm flash, LP55xx,
  MAX77705 and QNAP MCU drivers, along with some generic LED consumer
  binding documentation and unification.

  New Support & Features:
   - Add support for the IS31FL3236A LED driver, including an optional
     22kHz PWM frequency setting.
   - Add support for the red and green status LEDs on QNAP MCU devices.

  Improvements & Fixes:
   - Fix an issue in the MAX77705 driver where an error value was
     assigned but not returned.
   - Correctly update the torch current clamp setting in the Qualcomm
     flash LED driver to prevent unexpected clamping.
   - Add a separate register map for the PMI8998 to the Qualcomm flash
     LED driver to handle its unique register layout.
   - Fix the state numbering for the USB LED in the QNAP MCU driver to
     avoid command conflicts.
   - Correct the memory programming address calculation for non-paged
     devices like the LP5562 in the LP55xx driver.
   - Add Device Tree support to the generic led_get() function, allowing
     LEDs to be looked up by name.

  Cleanups & Refactoring:
   - Fix a spelling mistake in the Kconfig help text for the BD2606MVV
     driver.
   - Use devm_mutex_init() in the IS31FL319x driver to simplify code.

  Device Tree Bindings Updates:
   - Drop the redundant '-db' suffix from the IS31FL319x binding.
   - Introduce generic LED consumer bindings for referencing LEDs via
     phandles.
   - Unify the 'leds' property across several bindings to use the new
     generic consumer binding.
   - Convert the AMS AS3645A LED controller binding to the DT schema
     format"

* tag 'leds-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds:
  dt-bindings: leds: as3645: Convert to DT schema
  leds: led-class: Add Device Tree support to led_get()
  dt-bindings: leds: Unify 'leds' property
  dt-bindings: leds: Add generic LED consumer documentation
  leds: is31fl319x: Use devm_mutex_init()
  leds: leds-lp55xx: Use correct address for memory programming
  dt-bindings: leds: issi,is31fl319x: Drop 'db' suffix duplicating dtschema
  leds: qnap-mcu: Add support for the red and green status LEDs
  leds: qnap-mcu: Fix state numbering for USB LED
  leds: flash: leds-qcom-flash: Add a separate register map for PMI8998
  leds: flash: leds-qcom-flash: Update torch current clamp setting
  leds: max77705: Function return instead of variable assignment
  leds: Kconfig: Fix spelling mistake "limitiation" -> "limitation"
  leds: leds-is31fl32xx: Add support for is31fl3236a

7 files changed, 207 insertions, 95 deletions

diff --git a/Documentation/devicetree/bindings/leds/ams,as3645a.txt b/Documentation/devicetree/bindings/leds/ams,as3645a.txt
deleted file mode 100644
index 4af2987b25e9..000000000000
--- a/Documentation/devicetree/bindings/leds/ams,as3645a.txt
+++ /dev/null
@@ -1,85 +0,0 @@
-Analog devices AS3645A device tree bindings
-
-The AS3645A flash LED controller can drive two LEDs, one high current
-flash LED and one indicator LED. The high current flash LED can be
-used in torch mode as well.
-
-Ranges below noted as [a, b] are closed ranges between a and b, i.e. a
-and b are included in the range.
-
-Please also see common.txt in the same directory.
-
-
-Required properties
-===================
-
-compatible	: Must be "ams,as3645a".
-reg		: The I2C address of the device. Typically 0x30.
-#address-cells	: 1
-#size-cells	: 0
-
-
-Required properties of the flash child node (0)
-===============================================
-
-reg: 0
-flash-timeout-us: Flash timeout in microseconds. The value must be in
-		  the range [100000, 850000] and divisible by 50000.
-flash-max-microamp: Maximum flash current in microamperes. Has to be
-		    in the range between [200000, 500000] and
-		    divisible by 20000.
-led-max-microamp: Maximum torch (assist) current in microamperes. The
-		  value must be in the range between [20000, 160000] and
-		  divisible by 20000.
-ams,input-max-microamp: Maximum flash controller input current. The
-			value must be in the range [1250000, 2000000]
-			and divisible by 50000.
-
-
-Optional properties of the flash child node
-===========================================
-
-function	:  See Documentation/devicetree/bindings/leds/common.txt.
-color		:  See Documentation/devicetree/bindings/leds/common.txt.
-label		:  See Documentation/devicetree/bindings/leds/common.txt (deprecated).
-
-
-Required properties of the indicator child node (1)
-===================================================
-
-reg: 1
-led-max-microamp: Maximum indicator current. The allowed values are
-		  2500, 5000, 7500 and 10000.
-
-Optional properties of the indicator child node
-===============================================
-
-function	:  See Documentation/devicetree/bindings/leds/common.txt.
-color		:  See Documentation/devicetree/bindings/leds/common.txt.
-label		:  See Documentation/devicetree/bindings/leds/common.txt (deprecated).
-
-
-Example
-=======
-
-#include <dt-bindings/leds/common.h>
-
-	as3645a@30 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x30>;
-		compatible = "ams,as3645a";
-		led@0 {
-			reg = <0x0>;
-			flash-timeout-us = <150000>;
-			flash-max-microamp = <320000>;
-			led-max-microamp = <60000>;
-			ams,input-max-microamp = <1750000>;
-			function = LED_FUNCTION_FLASH;
-		};
-		led@1 {
-			reg = <0x1>;
-			led-max-microamp = <10000>;
-			function = LED_FUNCTION_INDICATOR;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/leds/ams,as3645a.yaml b/Documentation/devicetree/bindings/leds/ams,as3645a.yaml
new file mode 100644
index 000000000000..250a4b275d8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/ams,as3645a.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/ams,as3645a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AS3645A LED Controller
+
+maintainers:
+  - Sakari Ailus <sakari.ailus@iki.fi>
+
+description:
+  The AS3645A flash LED controller can drive two LEDs, one
+  high current flash LED and one indicator LED. The high
+  current flash LED can be used in torch mode as well.
+
+properties:
+  compatible:
+    const: ams,as3645a
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  led@0:
+    description: led0 describes the 'flash' feature
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        const: 0
+
+      flash-timeout-us:
+        minimum: 100000
+        maximum: 850000
+        multipleOf: 50000
+
+      flash-max-microamp:
+        minimum: 200000
+        maximum: 500000
+        multipleOf: 20000
+
+      led-max-microamp:
+        minimum: 20000
+        maximum: 160000
+        multipleOf: 20000
+        description:
+          Maximum current when in torch (assist) mode.
+
+      ams,input-max-microamp:
+        minimum: 1250000
+        maximum: 2000000
+        multipleOf: 50000
+
+    required:
+      - reg
+      - flash-timeout-us
+      - flash-max-microamp
+      - led-max-microamp
+      - ams,input-max-microamp
+
+  led@1:
+    description: led1 describes the 'indicator' feature
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        const: 1
+
+      led-max-microamp:
+        enum:
+          - 2500
+          - 5000
+          - 7500
+          - 10000
+        description:
+          Maximum indicator current.
+
+    required:
+      - reg
+      - led-max-microamp
+
+required:
+  - compatible
+  - reg
+  - "#size-cells"
+  - "#address-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    i2c{
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@30 {
+            compatible = "ams,as3645a";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <0x30>;
+
+            led@0 {
+                reg = <0>;
+                flash-timeout-us = <150000>;
+                flash-max-microamp = <320000>;
+                led-max-microamp = <60000>;
+                ams,input-max-microamp = <1750000>;
+                function = LED_FUNCTION_FLASH;
+            };
+
+            led@1 {
+                reg = <1>;
+                led-max-microamp = <10000>;
+                function = LED_FUNCTION_INDICATOR;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml
index f5554da6bc6c..8fc5af8f27f9 100644
--- a/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml
@@ -23,11 +23,7 @@ properties:
   compatible:
     const: led-backlight
 
-  leds:
-    description: A list of LED nodes
-    $ref: /schemas/types.yaml#/definitions/phandle-array
-    items:
-      maxItems: 1
+  leds: true
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml b/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml
index 3c0431c51159..906735acfbaf 100644
--- a/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml
+++ b/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml
@@ -42,7 +42,6 @@ properties:
     description: GPIO attached to the SDB pin.
 
   audio-gain-db:
-    $ref: /schemas/types.yaml#/definitions/uint32
     default: 0
     description: Audio gain selection for external analog modulation input.
     enum: [0, 3, 6, 9, 12, 15, 18, 21]
diff --git a/Documentation/devicetree/bindings/leds/leds-consumer.yaml b/Documentation/devicetree/bindings/leds/leds-consumer.yaml
new file mode 100644
index 000000000000..fe6a0faa1d3b
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-consumer.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-consumer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common leds consumer
+
+maintainers:
+  - Aleksandrs Vinarskis <alex@vinarskis.com>
+
+description:
+  Some LED defined in DT are required by other DT consumers, for example
+  v4l2 subnode may require privacy or flash LED. Unlike trigger-source
+  approach which is typically used as 'soft' binding, referencing LED
+  devices by phandle makes things simpler when 'hard' binding is desired.
+
+  Document LED properties that its consumers may define.
+
+select: true
+
+properties:
+  leds:
+    oneOf:
+      - type: object
+      - $ref: /schemas/types.yaml#/definitions/phandle-array
+        description:
+          A list of LED device(s) required by a particular consumer.
+        items:
+          maxItems: 1
+
+  led-names:
+    description:
+      A list of device name(s). Used to map LED devices to their respective
+      functions, when consumer requires more than one LED.
+
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    leds {
+        compatible = "gpio-leds";
+
+        privacy_led: privacy-led {
+            color = <LED_COLOR_ID_RED>;
+            default-state = "off";
+            function = LED_FUNCTION_INDICATOR;
+            gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+        };
+    };
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      v4l2_node: camera@36 {
+        reg = <0x36>;
+
+        leds = <&privacy_led>;
+        led-names = "privacy";
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-group-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-group-multicolor.yaml
index 8ed059a5a724..5c9cfa39396b 100644
--- a/Documentation/devicetree/bindings/leds/leds-group-multicolor.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-group-multicolor.yaml
@@ -17,10 +17,7 @@ properties:
   compatible:
     const: leds-group-multicolor
 
-  leds:
-    description:
-      An aray of monochromatic leds
-    $ref: /schemas/types.yaml#/definitions/phandle-array
+  leds: true
 
 required:
   - leds
diff --git a/Documentation/devicetree/bindings/media/video-interface-devices.yaml b/Documentation/devicetree/bindings/media/video-interface-devices.yaml
index cf7712ad297c..3ad1590b0496 100644
--- a/Documentation/devicetree/bindings/media/video-interface-devices.yaml
+++ b/Documentation/devicetree/bindings/media/video-interface-devices.yaml
@@ -17,6 +17,14 @@ properties:
       An array of phandles, each referring to a flash LED, a sub-node of the LED
       driver device node.
 
+  leds:
+    minItems: 1
+    maxItems: 1
+
+  led-names:
+    enum:
+      - privacy
+
   lens-focus:
     $ref: /schemas/types.yaml#/definitions/phandle
     description: