Merge tag 'pinctrl-v6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "The technical details below. For me the CIX Semi and Axis
  Communications ARTPEC-9 SoCs were the most interesting new drivers in
  this merge window.

  Core changes:

   - Handle per-direction skew control in the generic pin config

   - Drop the pointless subsystem boilerplate banner message during
     boot. Less noise in the console. It's available as debug message if
     someone really want it

  New drivers:

   - Samsung Exynos 8890 SoC support

   - Samsung Exynos derived Axis Communications ARTPEC-9 SoC support.
     These guys literally live next door to me, ARTPEC spells out "Axis
     Real-Time Picture Encoding Chip" and is tailored for camera image
     streams and is something they have evolved for a quarter of a
     century

   - Mediatek MT6878 SoC support

   - Qualcomm Glymur PMIC support (mostly just compatible strings)

   - Qualcomm Kaanapali SoC TLMM support

   - Microchip pic64gx "gpio2" SoC support

   - Microchip Polarfire "iomux0" SoC support

   - CIX Semiconductors SKY1 SoC support

   - Rockchip RK3506 SoC support

   - Airhoa AN7583 chip support

  Improvements:

   - Improvements for ST Microelectronics STM32 handling of skew
     settings so input and output can have different skew settings

   - A whole bunch of device tree binding cleanups: Marvell Armada and
     Berlin, Actions Semiconductor S700 and S900, Broadcom Northstar 2
     (NS2), Bitmain BM1880 and Spreadtrum SC9860 are moved over to
     schema"

* tag 'pinctrl-v6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (107 commits)
  pinctrl: add CONFIG_OF dependencies for microchip drivers
  pinctrl: starfive: use dynamic GPIO base allocation
  pinctrl: single: Fix incorrect type for error return variable
  MAINTAINERS: Change Linus Walleij mail address
  pinctrl: cix: Fix obscure dependency
  dt-bindings: pinctrl: cix,sky1-pinctrl: Drop duplicate newline
  dt-bindings: pinctrl: aspeed,ast2600-pinctrl: Add PCIe RC PERST# group
  pinctrl: airoha: Fix AIROHA_PINCTRL_CONFS_DRIVE_E2 in an7583_pinctrl_match_data
  pinctrl: airoha: fix pinctrl function mismatch issue
  pinctrl: cherryview: Convert to use intel_gpio_add_pin_ranges()
  pinctrl: intel: Export intel_gpio_add_pin_ranges()
  pinctrl: renesas: rzg2l: Refactor OEN register PWPR handling
  pinctrl: airoha: convert comma to semicolon
  pinctrl: elkhartlake: Switch to INTEL_GPP() macro
  pinctrl: cherryview: Switch to INTEL_GPP() macro
  pinctrl: emmitsburg: Switch to INTEL_GPP() macro
  pinctrl: denverton: Switch to INTEL_GPP() macro
  pinctrl: cedarfork: Switch to INTEL_GPP() macro
  pinctrl: airoha: add support for Airoha AN7583 PINs
  dt-bindings: pinctrl: airoha: Document AN7583 Pin Controller
  ...

36 files changed, 2222 insertions, 1051 deletions

diff --git a/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt b/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt
deleted file mode 100644
index 4c0807f28cfa..000000000000
--- a/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-* Xtal Clock bindings for Marvell Armada 37xx SoCs
-
-Marvell Armada 37xx SoCs allow to determine the xtal clock frequencies by
-reading the gpio latch register.
-
-This node must be a subnode of the node exposing the register address
-of the GPIO block where the gpio latch is located.
-See Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
-
-Required properties:
-- compatible : shall be one of the following:
-	"marvell,armada-3700-xtal-clock"
-- #clock-cells : from common clock binding; shall be set to 0
-
-Optional properties:
-- clock-output-names : from common clock binding; allows overwrite default clock
-	output names ("xtal")
-
-Example:
-pinctrl_nb: pinctrl-nb@13800 {
-	compatible = "armada3710-nb-pinctrl", "syscon", "simple-mfd";
-	reg = <0x13800 0x100>, <0x13C00 0x20>;
-
-	xtalclk: xtal-clk {
-		compatible = "marvell,armada-3700-xtal-clock";
-		clock-output-names = "xtal";
-		#clock-cells = <0>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/mfd/syscon-common.yaml b/Documentation/devicetree/bindings/mfd/syscon-common.yaml
index 451cbad467a3..14a08e7bc8bd 100644
--- a/Documentation/devicetree/bindings/mfd/syscon-common.yaml
+++ b/Documentation/devicetree/bindings/mfd/syscon-common.yaml
@@ -35,9 +35,6 @@ properties:
     minItems: 2
     maxItems: 5  # Should be enough
 
-  reg:
-    maxItems: 1
-
   reg-io-width:
     description:
       The size (in bytes) of the IO accesses that should be performed
diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.txt
deleted file mode 100644
index d13ff82f8518..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.txt
+++ /dev/null
@@ -1,170 +0,0 @@
-Actions Semi S700 Pin Controller
-
-This binding describes the pin controller found in the S700 SoC.
-
-Required Properties:
-
-- compatible:   Should be "actions,s700-pinctrl"
-- reg:          Should contain the register base address and size of
-		the pin controller.
-- clocks:       phandle of the clock feeding the pin controller
-- gpio-controller: Marks the device node as a GPIO controller.
-- gpio-ranges: Specifies the mapping between gpio controller and
-               pin-controller pins.
-- #gpio-cells: Should be two. The first cell is the gpio pin number
-		and the second cell is used for optional parameters.
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells: Specifies the number of cells needed to encode an
-		interrupt.  Shall be set to 2.  The first cell
-		defines the interrupt number, the second encodes
-		the trigger flags described in
-		bindings/interrupt-controller/interrupts.txt
-- interrupts: The interrupt outputs from the controller. There is one GPIO
-              interrupt per GPIO bank. The number of interrupts listed depends
-              on the number of GPIO banks on the SoC. The interrupts must be
-              ordered by bank, starting with bank 0.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-The pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those group(s), and various pin configuration
-parameters, such as pull-up, drive strength, etc.
-
-PIN CONFIGURATION NODES:
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function.
-
-Pinmux functions are available only for the pin groups while pinconf
-parameters are available for both pin groups and individual pins.
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pin configuration subnode:
-
-Required Properties:
-
-- pins:		An array of strings, each string containing the name of a pin.
-		These pins are used for selecting the pull control and schmitt
-		trigger parameters. The following are the list of pins
-		available:
-
-		eth_txd0, eth_txd1, eth_txd2, eth_txd3, eth_txen, eth_rxer,
-		eth_crs_dv, eth_rxd1, eth_rxd0, eth_rxd2, eth_rxd3, eth_ref_clk,
-		eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0,
-		i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1, i2s_mclk1,
-		pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, ks_in0, ks_in1, ks_in2,
-		ks_in3, ks_out0, ks_out1, ks_out2, lvds_oep, lvds_oen, lvds_odp,
-		lvds_odn, lvds_ocp, lvds_ocn, lvds_obp, lvds_obn, lvds_oap,
-		lvds_oan, lvds_eep, lvds_een, lvds_edp, lvds_edn, lvds_ecp,
-		lvds_ecn, lvds_ebp, lvds_ebn, lvds_eap, lvds_ean, lcd0_d18,
-		lcd0_d2, dsi_dp3, dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, dsi_cn,
-		dsi_dp0, dsi_dn0, dsi_dp2, dsi_dn2, sd0_d0, sd0_d1, sd0_d2,
-		sd0_d3, sd1_d0, sd1_d1, sd1_d2, sd1_d3, sd0_cmd, sd0_clk,
-		sd1_cmd, sd1_clk, spi0_ss, spi0_miso, uart0_rx, uart0_tx,
-		uart2_rx, uart2_tx, uart2_rtsb, uart2_ctsb, uart3_rx, uart3_tx,
-		uart3_rtsb, uart3_ctsb, i2c0_sclk, i2c0_sdata, i2c1_sclk,
-		i2c1_sdata, i2c2_sdata, csi_dn0, csi_dp0, csi_dn1, csi_dp1,
-		csi_cn, csi_cp, csi_dn2, csi_dp2, csi_dn3, csi_dp3,
-		sensor0_pclk, sensor0_ckout, dnand_d0, dnand_d1, dnand_d2,
-		dnand_d3, dnand_d4, dnand_d5, dnand_d6, dnand_d7, dnand_wrb,
-		dnand_rdb, dnand_rdbn, dnand_dqs, dnand_dqsn, dnand_rb0,
-		dnand_ale, dnand_cle, dnand_ceb0, dnand_ceb1, dnand_ceb2,
-		dnand_ceb3, porb, clko_25m, bsel, pkg0, pkg1, pkg2, pkg3
-
-- groups:       An array of strings, each string containing the name of a pin
-                group. These pin groups are used for selecting the pinmux
-                functions.
-		rgmii_txd23_mfp, rgmii_rxd2_mfp, rgmii_rxd3_mfp, lcd0_d18_mfp,
-		rgmii_txd01_mfp, rgmii_txd0_mfp, rgmii_txd1_mfp, rgmii_txen_mfp,
-		rgmii_rxen_mfp, rgmii_rxd1_mfp, rgmii_rxd0_mfp, rgmii_ref_clk_mfp,
-		i2s_d0_mfp, i2s_pcm1_mfp, i2s0_pcm0_mfp, i2s1_pcm0_mfp,
-		i2s_d1_mfp, ks_in2_mfp, ks_in1_mfp, ks_in0_mfp, ks_in3_mfp,
-		ks_out0_mfp, ks_out1_mfp, ks_out2_mfp, lvds_o_pn_mfp, dsi_dn0_mfp,
-		dsi_dp2_mfp, lcd0_d2_mfp, dsi_dp3_mfp, dsi_dn3_mfp, dsi_dp0_mfp,
-		lvds_ee_pn_mfp, uart2_rx_tx_mfp, spi0_i2c_pcm_mfp, dsi_dnp1_cp_d2_mfp,
-		dsi_dnp1_cp_d17_mfp, lvds_e_pn_mfp, dsi_dn2_mfp, uart2_rtsb_mfp,
-		uart2_ctsb_mfp, uart3_rtsb_mfp, uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp,
-		sd0_d2_d3_mfp, sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp,
-		uart0_rx_mfp, clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp, uart0_tx_mfp,
-		i2c0_mfp, csi_dn_dp_mfp, sen0_pclk_mfp, pcm1_in_mfp, pcm1_clk_mfp,
-		pcm1_sync_mfp, pcm1_out_mfp, dnand_data_wr_mfp, dnand_acle_ce0_mfp,
-		nand_ceb2_mfp, nand_ceb3_mfp
-
-		These pin groups are used for selecting the drive strength
-		parameters.
-
-		sirq_drv, rgmii_txd23_drv, rgmii_rxd23_drv, rgmii_txd01_txen_drv,
-		rgmii_rxer_drv, rgmii_crs_drv, rgmii_rxd10_drv, rgmii_ref_clk_drv,
-		smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv, i2s3_drv, i2s13_drv,
-		pcm1_drv, ks_in_drv, ks_out_drv, lvds_all_drv, lcd_d18_d2_drv,
-		dsi_all_drv, sd0_d0_d3_drv, sd0_cmd_drv, sd0_clk_drv, spi0_all_drv,
-		uart0_rx_drv, uart0_tx_drv, uart2_all_drv, i2c0_all_drv, i2c12_all_drv,
-		sens0_pclk_drv, sens0_ckout_drv, uart3_all_drv
-
-- function:	An array of strings, each string containing the name of the
-		pinmux functions. These functions can only be selected by
-		the corresponding pin groups. The following are the list of
-		pinmux functions available:
-
-		nor, eth_rgmii, eth_sgmii, spi0, spi1, spi2, spi3, seNs0, sens1,
-		uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0, i2s1,
-		pcm1, pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, p0,
-		sd0, sd1, sd2, i2c0, i2c1, i2c2, i2c3, dsi, lvds, usb30,
-		clko_25m, mipi_csi, nand, spdif, sirq0, sirq1, sirq2, bt, lcd0
-
-Optional Properties:
-
-- bias-pull-down: No arguments. The specified pins should be configured as
-		pull down.
-- bias-pull-up:   No arguments. The specified pins should be configured as
-		pull up.
-- input-schmitt-enable: No arguments: Enable schmitt trigger for the specified
-		pins
-- input-schmitt-disable: No arguments: Disable schmitt trigger for the specified
-		pins
-- drive-strength: Integer. Selects the drive strength for the specified
-		pins in mA.
-		Valid values are:
-		<2>
-		<4>
-		<8>
-		<12>
-
-Example:
-
-	pinctrl: pinctrl@e01b0000 {
-		compatible = "actions,s700-pinctrl";
-		reg = <0x0 0xe01b0000 0x0 0x1000>;
-		clocks = <&cmu CLK_GPIO>;
-		gpio-controller;
-		gpio-ranges = <&pinctrl 0 0 136>;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-                interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
-                             <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
-                             <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
-                             <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
-                             <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-
-		uart3-default: uart3-default {
-			pinmux {
-				groups = "uart3_rtsb_mfp", "uart3_ctsb_mfp";
-				function = "uart3";
-			};
-			pinconf {
-				groups = "uart3_all_drv";
-				drive-strength = <2>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.yaml
new file mode 100644
index 000000000000..9597b983c332
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.yaml
@@ -0,0 +1,204 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/actions,s700-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Actions Semi S700 Pin Controller
+
+maintainers:
+  - Manivannan Sadhasivam <mani@kernel.org>
+
+properties:
+  compatible:
+    const: actions,s700-pinctrl
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  gpio-controller: true
+
+  gpio-line-names:
+    maxItems: 136
+
+  gpio-ranges: true
+
+  '#gpio-cells':
+    const: 2
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    maxItems: 5
+    description:
+      The interrupt outputs from the controller. There is one GPIO interrupt per
+      GPIO bank. The interrupts must be ordered by bank, starting with
+      bank 0.
+
+additionalProperties:
+  type: object
+  description: Pin configuration subnode
+  additionalProperties: false
+
+  properties:
+    pinmux:
+      description: Configure pin multiplexing.
+      type: object
+      $ref: /schemas/pinctrl/pinmux-node.yaml#
+      additionalProperties: false
+
+      properties:
+        groups:
+          items:
+            enum: [
+              rgmii_txd23_mfp, rgmii_rxd2_mfp, rgmii_rxd3_mfp, lcd0_d18_mfp,
+              rgmii_txd01_mfp, rgmii_txd0_mfp, rgmii_txd1_mfp, rgmii_txen_mfp,
+              rgmii_rxen_mfp, rgmii_rxd1_mfp, rgmii_rxd0_mfp, rgmii_ref_clk_mfp,
+              i2c1_dummy, i2c2_dummy, i2s_d0_mfp, i2s_pcm1_mfp, i2s0_pcm0_mfp, i2s1_pcm0_mfp,
+              i2s_d1_mfp, ks_in2_mfp, ks_in1_mfp, ks_in0_mfp, ks_in3_mfp,
+              ks_out0_mfp, ks_out1_mfp, ks_out2_mfp, lvds_o_pn_mfp, dsi_dn0_mfp,
+              dsi_dp2_mfp, lcd0_d2_mfp, dsi_dp3_mfp, dsi_dn3_mfp, dsi_dp0_mfp,
+              lvds_ee_pn_mfp, uart2_rx_tx_mfp, spi0_i2c_pcm_mfp,
+              dsi_dnp1_cp_d2_mfp, dsi_dnp1_cp_d17_mfp, lvds_e_pn_mfp,
+              dsi_dn2_mfp, uart2_rtsb_mfp, uart2_ctsb_mfp, uart3_rtsb_mfp,
+              uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp, sd0_d2_d3_mfp,
+              sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp,
+              uart0_rx_mfp, clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp,
+              uart0_tx_mfp, i2c0_mfp, csi_dn_dp_mfp, sen0_pclk_mfp, pcm1_in_mfp,
+              pcm1_clk_mfp, pcm1_sync_mfp, pcm1_out_mfp, dnand_data_wr_mfp,
+              dnand_acle_ce0_mfp, nand_ceb2_mfp, nand_ceb3_mfp
+            ]
+
+        function:
+          items:
+            enum: [
+              nor, eth_rgmii, eth_sgmii, spi0, spi1, spi2, spi3, seNs0, sens1,
+              uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0, i2s1, pcm1,
+              pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, p0, sd0, sd1,
+              sd2, i2c0, i2c1, i2c2, i2c3, dsi, lvds, usb30, clko_25m, mipi_csi,
+              nand, spdif, sirq0, sirq1, sirq2, bt, lcd0
+            ]
+
+      required:
+        - groups
+        - function
+
+    pinconf:
+      description: Configure pin-specific parameters.
+      type: object
+      allOf:
+        - $ref: /schemas/pinctrl/pincfg-node.yaml#
+        - $ref: /schemas/pinctrl/pinmux-node.yaml#
+      additionalProperties: false
+
+      properties:
+        groups:
+          items:
+            enum: [
+              sirq_drv, rgmii_txd23_drv, rgmii_rxd23_drv, rgmii_txd01_txen_drv,
+              rgmii_rxer_drv, rgmii_crs_drv, rgmii_rxd10_drv, rgmii_ref_clk_drv,
+              smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv, i2s3_drv, i2s13_drv,
+              pcm1_drv, ks_in_drv, ks_out_drv, lvds_all_drv, lcd_d18_d2_drv,
+              dsi_all_drv, sd0_d0_d3_drv, sd0_cmd_drv, sd0_clk_drv,
+              spi0_all_drv, uart0_rx_drv, uart0_tx_drv, uart2_all_drv,
+              i2c0_all_drv, i2c12_all_drv, sens0_pclk_drv, sens0_ckout_drv,
+              uart3_all_drv
+            ]
+
+        pins:
+          items:
+            enum: [
+              eth_txd0, eth_txd1, eth_txd2, eth_txd3, eth_txen, eth_rxer,
+              eth_crs_dv, eth_rxd1, eth_rxd0, eth_rxd2, eth_rxd3, eth_ref_clk,
+              eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0,
+              i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1, i2s_mclk1,
+              pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, ks_in0, ks_in1, ks_in2,
+              ks_in3, ks_out0, ks_out1, ks_out2, lvds_oep, lvds_oen, lvds_odp,
+              lvds_odn, lvds_ocp, lvds_ocn, lvds_obp, lvds_obn, lvds_oap,
+              lvds_oan, lvds_eep, lvds_een, lvds_edp, lvds_edn, lvds_ecp,
+              lvds_ecn, lvds_ebp, lvds_ebn, lvds_eap, lvds_ean, lcd0_d18,
+              lcd0_d2, dsi_dp3, dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, dsi_cn,
+              dsi_dp0, dsi_dn0, dsi_dp2, dsi_dn2, sd0_d0, sd0_d1, sd0_d2,
+              sd0_d3, sd1_d0, sd1_d1, sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd,
+              sd1_clk, spi0_ss, spi0_miso, uart0_rx, uart0_tx, uart2_rx,
+              uart2_tx, uart2_rtsb, uart2_ctsb, uart3_rx, uart3_tx, uart3_rtsb,
+              uart3_ctsb, i2c0_sclk, i2c0_sdata, i2c1_sclk, i2c1_sdata,
+              i2c2_sclk, i2c2_sdata, csi_dn0, csi_dp0, csi_dn1, csi_dp1, csi_cn, csi_cp,
+              csi_dn2, csi_dp2, csi_dn3, csi_dp3, sensor0_pclk, sensor0_ckout,
+              dnand_d0, dnand_d1, dnand_d2, dnand_d3, dnand_d4, dnand_d5,
+              dnand_d6, dnand_d7, dnand_wrb, dnand_rdb, dnand_rdbn, dnand_dqs,
+              dnand_dqsn, dnand_rb0, dnand_ale, dnand_cle, dnand_ceb0,
+              dnand_ceb1, dnand_ceb2, dnand_ceb3, porb, clko_25m, bsel, pkg0,
+              pkg1, pkg2, pkg3
+            ]
+
+        bias-pull-down:
+          type: boolean
+
+        bias-pull-up:
+          type: boolean
+
+        drive-strength:
+          description: Selects the drive strength for the specified pins in mA.
+          enum: [2, 4, 8, 12]
+
+        input-schmitt-enable: true
+        input-schmitt-disable: true
+
+      oneOf:
+        - required:
+            - groups
+        - required:
+            - pins
+
+  anyOf:
+    - required: [ pinmux ]
+    - required: [ pinconf ]
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - gpio-controller
+  - gpio-ranges
+  - '#gpio-cells'
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pinctrl: pinctrl@e01b0000 {
+        compatible = "actions,s700-pinctrl";
+        reg = <0xe01b0000 0x1000>;
+        clocks = <&cmu 1>;
+        gpio-controller;
+        gpio-ranges = <&pinctrl 0 0 136>;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+
+        uart3-default {
+            pinmux {
+                groups = "uart3_rtsb_mfp", "uart3_ctsb_mfp";
+                function = "uart3";
+            };
+            pinconf {
+                groups = "uart3_all_drv";
+                drive-strength = <2>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt
deleted file mode 100644
index 81b58dddd3ed..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt
+++ /dev/null
@@ -1,204 +0,0 @@
-Actions Semi S900 Pin Controller
-
-This binding describes the pin controller found in the S900 SoC.
-
-Required Properties:
-
-- compatible:   Should be "actions,s900-pinctrl"
-- reg:          Should contain the register base address and size of
-                the pin controller.
-- clocks:       phandle of the clock feeding the pin controller
-- gpio-controller: Marks the device node as a GPIO controller.
-- gpio-ranges: Specifies the mapping between gpio controller and
-               pin-controller pins.
-- #gpio-cells: Should be two. The first cell is the gpio pin number
-               and the second cell is used for optional parameters.
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells: Specifies the number of cells needed to encode an
-                    interrupt.  Shall be set to 2.  The first cell
-                    defines the interrupt number, the second encodes
-                    the trigger flags described in
-                    bindings/interrupt-controller/interrupts.txt
-- interrupts: The interrupt outputs from the controller. There is one GPIO
-              interrupt per GPIO bank. The number of interrupts listed depends
-              on the number of GPIO banks on the SoC. The interrupts must be
-              ordered by bank, starting with bank 0.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-The pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those group(s), and various pin configuration
-parameters, such as pull-up, drive strength, etc.
-
-PIN CONFIGURATION NODES:
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function.
-
-Pinmux functions are available only for the pin groups while pinconf
-parameters are available for both pin groups and individual pins.
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pin configuration subnode:
-
-Required Properties:
-
-- pins:           An array of strings, each string containing the name of a pin.
-                  These pins are used for selecting the pull control and schmitt
-                  trigger parameters. The following are the list of pins
-                  available:
-
-                  eth_txd0, eth_txd1, eth_txen, eth_rxer, eth_crs_dv,
-                  eth_rxd1, eth_rxd0, eth_ref_clk, eth_mdc, eth_mdio,
-                  sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0, i2s_lrclk0,
-                  i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1, i2s_mclk1,
-                  pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, eram_a5,
-                  eram_a6, eram_a7, eram_a8, eram_a9, eram_a10, eram_a11,
-                  lvds_oep, lvds_oen, lvds_odp, lvds_odn, lvds_ocp,
-                  lvds_ocn, lvds_obp, lvds_obn, lvds_oap, lvds_oan,
-                  lvds_eep, lvds_een, lvds_edp, lvds_edn, lvds_ecp,
-                  lvds_ecn, lvds_ebp, lvds_ebn, lvds_eap, lvds_ean,
-                  sd0_d0, sd0_d1, sd0_d2, sd0_d3, sd1_d0, sd1_d1,
-                  sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd, sd1_clk,
-                  spi0_sclk, spi0_ss, spi0_miso, spi0_mosi, uart0_rx,
-                  uart0_tx, uart2_rx, uart2_tx, uart2_rtsb, uart2_ctsb,
-                  uart3_rx, uart3_tx, uart3_rtsb, uart3_ctsb, uart4_rx,
-                  uart4_tx, i2c0_sclk, i2c0_sdata, i2c1_sclk, i2c1_sdata,
-                  i2c2_sclk, i2c2_sdata, csi0_dn0, csi0_dp0, csi0_dn1,
-                  csi0_dp1, csi0_cn, csi0_cp, csi0_dn2, csi0_dp2, csi0_dn3,
-                  csi0_dp3, dsi_dp3, dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp,
-                  dsi_cn, dsi_dp0, dsi_dn0, dsi_dp2, dsi_dn2, sensor0_pclk,
-                  csi1_dn0,csi1_dp0,csi1_dn1, csi1_dp1, csi1_cn, csi1_cp,
-                  sensor0_ckout, nand0_d0, nand0_d1, nand0_d2, nand0_d3,
-                  nand0_d4, nand0_d5, nand0_d6, nand0_d7, nand0_dqs,
-                  nand0_dqsn, nand0_ale, nand0_cle, nand0_ceb0, nand0_ceb1,
-                  nand0_ceb2, nand0_ceb3, nand1_d0, nand1_d1, nand1_d2,
-                  nand1_d3, nand1_d4, nand1_d5, nand1_d6, nand1_d7, nand1_dqs,
-                  nand1_dqsn, nand1_ale, nand1_cle, nand1_ceb0, nand1_ceb1,
-                  nand1_ceb2, nand1_ceb3, sgpio0, sgpio1, sgpio2, sgpio3
-
-- groups:         An array of strings, each string containing the name of a pin
-                  group. These pin groups are used for selecting the pinmux
-                  functions.
-
-                  lvds_oxx_uart4_mfp, rmii_mdc_mfp, rmii_mdio_mfp, sirq0_mfp,
-                  sirq1_mfp, rmii_txd0_mfp, rmii_txd1_mfp, rmii_txen_mfp,
-                  rmii_rxer_mfp, rmii_crs_dv_mfp, rmii_rxd1_mfp, rmii_rxd0_mfp,
-                  rmii_ref_clk_mfp, i2s_d0_m