Merge tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "The main change this time was the introduction of the drivers/genpd
  subsystem that gets split out from drivers/soc to keep common
  functionality together.

  The SCMI driver subsystem gets an update to version 3.2 of the
  specification. There are also updates to memory, reset and other
  firmware drivers.

  On the soc driver side, the updates are mostly cleanups across a
  number of Arm platforms. On driver for loongarch adds power management
  for DT based systems, another driver is for HiSilicon's Arm server
  chips with their HCCS system health interface.

  The remaining updates for the most part add support for additional
  hardware in existing drivers or contain minor cleanups. Most of these
  are for the Qualcomm Snapdragon platform"

* tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (136 commits)
  bus: fsl-mc: Use common ranges functions
  soc: kunpeng_hccs: fix some sparse warnings about incorrect type
  soc: loongson2_pm: add power management support
  soc: dt-bindings: add loongson-2 pm
  soc: rockchip: grf: Fix SDMMC not working on RK3588 with bus-width > 1
  genpd: rockchip: Add PD_VO entry for rv1126
  bus: ti-sysc: Fix cast to enum warning
  soc: kunpeng_hccs: add MAILBOX dependency
  MAINTAINERS: remove OXNAS entry
  dt-bindings: interrupt-controller: arm,versatile-fpga-irq: mark oxnas compatible as deprecated
  irqchip: irq-versatile-fpga: remove obsolete oxnas compatible
  soc: qcom: aoss: Tidy up qmp_send() callers
  soc: qcom: aoss: Format string in qmp_send()
  soc: qcom: aoss: Move length requirements from caller
  soc: kunpeng_hccs: fix size_t format string
  soc: ti: k3-socinfo.c: Add JTAG ID for AM62PX
  dt-bindings: firmware: qcom: scm: Updating VMID list
  firmware: imx: scu-irq: support identifying SCU wakeup source from sysfs
  firmware: imx: scu-irq: enlarge the IMX_SC_IRQ_NUM_GROUP
  firmware: imx: scu-irq: add imx_scu_irq_get_status
  ...

35 files changed, 468 insertions, 84 deletions

diff --git a/Documentation/ABI/testing/sysfs-devices-platform-kunpeng_hccs b/Documentation/ABI/testing/sysfs-devices-platform-kunpeng_hccs
new file mode 100644
index 000000000000..fdb4e36310fb
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-platform-kunpeng_hccs
@@ -0,0 +1,81 @@
+What:		/sys/devices/platform/HISI04Bx:00/chipX/all_linked
+What:		/sys/devices/platform/HISI04Bx:00/chipX/linked_full_lane
+What:		/sys/devices/platform/HISI04Bx:00/chipX/crc_err_cnt
+Date:		November 2023
+KernelVersion:	6.6
+Contact:	Huisong Li <lihuisong@huawei.org>
+Description:
+		The /sys/devices/platform/HISI04Bx:00/chipX/ directory
+		contains read-only attributes exposing some summarization
+		information of all HCCS ports under a specified chip.
+		The X in 'chipX' indicates the Xth chip on platform.
+
+		There are following attributes in this directory:
+
+		================= ==== =========================================
+		all_linked:       (RO) if all enabled ports on this chip are
+				       linked (bool).
+		linked_full_lane: (RO) if all linked ports on this chip are full
+				       lane (bool).
+		crc_err_cnt:      (RO) total CRC err count for all ports on this
+				       chip.
+		================= ==== =========================================
+
+What:		/sys/devices/platform/HISI04Bx:00/chipX/dieY/all_linked
+What:		/sys/devices/platform/HISI04Bx:00/chipX/dieY/linked_full_lane
+What:		/sys/devices/platform/HISI04Bx:00/chipX/dieY/crc_err_cnt
+Date:		November 2023
+KernelVersion:	6.6
+Contact:	Huisong Li <lihuisong@huawei.org>
+Description:
+		The /sys/devices/platform/HISI04Bx:00/chipX/dieY/ directory
+		contains read-only attributes exposing some summarization
+		information of all HCCS ports under a specified die.
+		The Y in 'dieY' indicates the hardware id of the die on chip who
+		has chip id X.
+
+		There are following attributes in this directory:
+
+		================= ==== =========================================
+		all_linked:       (RO) if all enabled ports on this die are
+				       linked (bool).
+		linked_full_lane: (RO) if all linked ports on this die are full
+				       lane (bool).
+		crc_err_cnt:      (RO) total CRC err count for all ports on this
+				       die.
+		================= ==== =========================================
+
+What:		/sys/devices/platform/HISI04Bx:00/chipX/dieY/hccsN/type
+What:		/sys/devices/platform/HISI04Bx:00/chipX/dieY/hccsN/lane_mode
+What:		/sys/devices/platform/HISI04Bx:00/chipX/dieY/hccsN/enable
+What:		/sys/devices/platform/HISI04Bx:00/chipX/dieY/hccsN/cur_lane_num
+What:		/sys/devices/platform/HISI04Bx:00/chipX/dieY/hccsN/link_fsm
+What:		/sys/devices/platform/HISI04Bx:00/chipX/dieY/hccsN/lane_mask
+What:		/sys/devices/platform/HISI04Bx:00/chipX/dieY/hccsN/crc_err_cnt
+Date:		November 2023
+KernelVersion:	6.6
+Contact:	Huisong Li <lihuisong@huawei.org>
+Description:
+		The /sys/devices/platform/HISI04Bx/chipX/dieX/hccsN/ directory
+		contains read-only attributes exposing information about
+		a HCCS port. The N value in 'hccsN' indicates this port id.
+		The X in 'chipX' indicates the ID of the chip to which the
+		HCCS port belongs. For example, X ranges from to 'n - 1' if the
+		chip number on platform is n.
+		The Y in 'dieY' indicates the hardware id of the die to which
+		the hccs port belongs.
+		Note: type, lane_mode and enable are fixed attributes on running
+		platform.
+
+		The HCCS port have the following attributes:
+
+		============= ==== =============================================
+		type:         (RO) port type (string), e.g. HCCS-v1 -> H32
+		lane_mode:    (RO) the lane mode of this port (string), e.g. x8
+		enable:       (RO) indicate if this port is enabled (bool).
+		cur_lane_num: (RO) current lane number of this port.
+		link_fsm:     (RO) link finite state machine of this port.
+		lane_mask:    (RO) current lane mask of this port, every bit
+			           indicates a lane.
+		crc_err_cnt:  (RO) CRC err count on this port.
+		============= ==== =============================================
diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
index d6774db257f0..59cc88a52f6b 100644
--- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
@@ -82,7 +82,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
     clock-controller@af00000 {
       compatible = "qcom,sm8250-dispcc";
       reg = <0x0af00000 0x10000>;
@@ -103,7 +103,7 @@ examples:
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
-      power-domains = <&rpmhpd SM8250_MMCX>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
       required-opps = <&rpmhpd_opp_low_svs>;
     };
 ...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml
index 23505c8c3dbd..d723bb11d947 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml
@@ -51,7 +51,7 @@ unevaluatedProperties: false
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     clock-controller@abf0000 {
       compatible = "qcom,sm8350-videocc";
@@ -59,7 +59,7 @@ examples:
       clocks = <&rpmhcc RPMH_CXO_CLK>,
                <&rpmhcc RPMH_CXO_CLK_A>,
                <&sleep_clk>;
-      power-domains = <&rpmhpd SM8350_MMCX>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
       required-opps = <&rpmhpd_opp_low_svs>;
       #clock-cells = <1>;
       #reset-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml
index 87ae74166807..8178c35bc348 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml
@@ -64,7 +64,7 @@ examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-sm8450.h>
     #include <dt-bindings/clock/qcom,rpmh.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
     clock-controller@ade0000 {
       compatible = "qcom,sm8450-camcc";
       reg = <0xade0000 0x20000>;
@@ -72,7 +72,7 @@ examples:
                <&rpmhcc RPMH_CXO_CLK>,
                <&rpmhcc RPMH_CXO_CLK_A>,
                <&sleep_clk>;
-      power-domains = <&rpmhpd SM8450_MMCX>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
       required-opps = <&rpmhpd_opp_low_svs>;
       #clock-cells = <1>;
       #reset-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml
index 1dd1f696dcd3..2f22310b08a9 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml
@@ -76,7 +76,7 @@ examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-sm8450.h>
     #include <dt-bindings/clock/qcom,rpmh.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
     clock-controller@af00000 {
       compatible = "qcom,sm8450-dispcc";
       reg = <0x0af00000 0x10000>;
@@ -91,7 +91,7 @@ examples:
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
-      power-domains = <&rpmhpd SM8450_MMCX>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
       required-opps = <&rpmhpd_opp_low_svs>;
     };
 ...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml
index f1c6dd50f184..bad8f019a8d3 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml
@@ -64,13 +64,13 @@ examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-sm8450.h>
     #include <dt-bindings/clock/qcom,rpmh.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
     videocc: clock-controller@aaf0000 {
       compatible = "qcom,sm8450-videocc";
       reg = <0x0aaf0000 0x10000>;
       clocks = <&rpmhcc RPMH_CXO_CLK>,
                <&gcc GCC_VIDEO_AHB_CLK>;
-      power-domains = <&rpmhpd SM8450_MMCX>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
       required-opps = <&rpmhpd_opp_low_svs>;
       #clock-cells = <1>;
       #reset-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml
index ab25f7cbaa2e..c129f8c16b50 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml
@@ -76,7 +76,7 @@ examples:
   - |
     #include <dt-bindings/clock/qcom,sm8550-gcc.h>
     #include <dt-bindings/clock/qcom,rpmh.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
     clock-controller@af00000 {
       compatible = "qcom,sm8550-dispcc";
       reg = <0x0af00000 0x10000>;
@@ -99,7 +99,7 @@ examples:
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
-      power-domains = <&rpmhpd SM8550_MMCX>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
       required-opps = <&rpmhpd_opp_low_svs>;
     };
 ...
diff --git a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
index 2b07146161b4..6de01cf3259d 100644
--- a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
@@ -124,7 +124,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
     clock-controller@ab00000 {
       compatible = "qcom,sdm845-videocc";
       reg = <0x0ab00000 0x10000>;
@@ -133,7 +133,7 @@ examples:
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
-      power-domains = <&rpmhpd SM8250_MMCX>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
       required-opps = <&rpmhpd_opp_low_svs>;
     };
 ...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml
index 687c8c170cd4..acd2ed391b2f 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml
@@ -54,7 +54,7 @@ examples:
     #include <dt-bindings/clock/qcom,gcc-sm8250.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interconnect/qcom,sm8250.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     display-controller@ae01000 {
         compatible = "qcom,sm8250-dpu";
@@ -72,7 +72,7 @@ examples:
         assigned-clock-rates = <19200000>;
 
         operating-points-v2 = <&mdp_opp_table>;
-        power-domains = <&rpmhpd SM8250_MMCX>;
+        power-domains = <&rpmhpd RPMHPD_MMCX>;
 
         interrupt-parent = <&mdss>;
         interrupts = <0>;
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml
index 368d3db0ce96..5cfb9b917e90 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml
@@ -76,7 +76,7 @@ examples:
     #include <dt-bindings/clock/qcom,rpmh.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interconnect/qcom,sm8250.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     display-subsystem@ae00000 {
         compatible = "qcom,sm8250-mdss";
@@ -121,7 +121,7 @@ examples:
             assigned-clock-rates = <19200000>;
 
             operating-points-v2 = <&mdp_opp_table>;
-            power-domains = <&rpmhpd SM8250_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             interrupt-parent = <&mdss>;
             interrupts = <0>;
@@ -196,7 +196,7 @@ examples:
             assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
 
             operating-points-v2 = <&dsi_opp_table>;
-            power-domains = <&rpmhpd SM8250_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             phys = <&dsi0_phy>;
             phy-names = "dsi";
@@ -286,7 +286,7 @@ examples:
             assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
 
             operating-points-v2 = <&dsi_opp_table>;
-            power-domains = <&rpmhpd SM8250_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             phys = <&dsi1_phy>;
             phy-names = "dsi";
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml
index 120500395c9a..1a4e03531a1b 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml
@@ -51,7 +51,7 @@ examples:
     #include <dt-bindings/clock/qcom,gcc-sm8350.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interconnect/qcom,sm8350.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     display-controller@ae01000 {
         compatible = "qcom,sm8350-dpu";
@@ -76,7 +76,7 @@ examples:
         assigned-clock-rates = <19200000>;
 
         operating-points-v2 = <&mdp_opp_table>;
-        power-domains = <&rpmhpd SM8350_MMCX>;
+        power-domains = <&rpmhpd RPMHPD_MMCX>;
 
         interrupt-parent = <&mdss>;
         interrupts = <0>;
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
index f2cbeb435f1b..8c89fb7fc8a3 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
@@ -81,7 +81,7 @@ examples:
     #include <dt-bindings/clock/qcom,rpmh.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interconnect/qcom,sm8350.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     display-subsystem@ae00000 {
         compatible = "qcom,sm8350-mdss";
@@ -134,7 +134,7 @@ examples:
             assigned-clock-rates = <19200000>;
 
             operating-points-v2 = <&mdp_opp_table>;
-            power-domains = <&rpmhpd SM8350_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             interrupt-parent = <&mdss>;
             interrupts = <0>;
@@ -203,7 +203,7 @@ examples:
                                  <&mdss_dsi0_phy 1>;
 
             operating-points-v2 = <&dsi_opp_table>;
-            power-domains = <&rpmhpd SM8350_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             phys = <&mdss_dsi0_phy>;
 
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml
index 0d17ece1c453..da3fd66c564f 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml
@@ -58,7 +58,7 @@ examples:
     #include <dt-bindings/clock/qcom,gcc-sm8450.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interconnect/qcom,sm8450.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     display-controller@ae01000 {
         compatible = "qcom,sm8450-dpu";
@@ -83,7 +83,7 @@ examples:
         assigned-clock-rates = <19200000>;
 
         operating-points-v2 = <&mdp_opp_table>;
-        power-domains = <&rpmhpd SM8450_MMCX>;
+        power-domains = <&rpmhpd RPMHPD_MMCX>;
 
         interrupt-parent = <&mdss>;
         interrupts = <0>;
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml
index 494e2a080e99..cfad5049a966 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml
@@ -76,7 +76,7 @@ examples:
     #include <dt-bindings/clock/qcom,rpmh.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interconnect/qcom,sm8450.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     display-subsystem@ae00000 {
         compatible = "qcom,sm8450-mdss";
@@ -130,7 +130,7 @@ examples:
             assigned-clock-rates = <19200000>;
 
             operating-points-v2 = <&mdp_opp_table>;
-            power-domains = <&rpmhpd SM8450_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             interrupt-parent = <&mdss>;
             interrupts = <0>;
@@ -210,7 +210,7 @@ examples:
             assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
 
             operating-points-v2 = <&dsi_opp_table>;
-            power-domains = <&rpmhpd SM8450_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             phys = <&dsi0_phy>;
             phy-names = "dsi";
@@ -305,7 +305,7 @@ examples:
             assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
 
             operating-points-v2 = <&dsi_opp_table>;
-            power-domains = <&rpmhpd SM8450_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             phys = <&dsi1_phy>;
             phy-names = "dsi";
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml
index ff58a747bb6f..99908fbe74f0 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml
@@ -57,7 +57,7 @@ examples:
     #include <dt-bindings/clock/qcom,sm8550-dispcc.h>
     #include <dt-bindings/clock/qcom,sm8550-gcc.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     display-controller@ae01000 {
         compatible = "qcom,sm8550-dpu";
@@ -82,7 +82,7 @@ examples:
         assigned-clock-rates = <19200000>;
 
         operating-points-v2 = <&mdp_opp_table>;
-        power-domains = <&rpmhpd SM8550_MMCX>;
+        power-domains = <&rpmhpd RPMHPD_MMCX>;
 
         interrupt-parent = <&mdss>;
         interrupts = <0>;
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml
index 70ce7cb7a80d..5390a8e79ad3 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml
@@ -76,7 +76,7 @@ examples:
     #include <dt-bindings/clock/qcom,rpmh.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interconnect/qcom,sm8550-rpmh.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
 
     display-subsystem@ae00000 {
         compatible = "qcom,sm8550-mdss";
@@ -130,7 +130,7 @@ examples:
             assigned-clock-rates = <19200000>;
 
             operating-points-v2 = <&mdp_opp_table>;
-            power-domains = <&rpmhpd SM8550_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             interrupt-parent = <&mdss>;
             interrupts = <0>;
@@ -205,7 +205,7 @@ examples:
             assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
 
             operating-points-v2 = <&dsi_opp_table>;
-            power-domains = <&rpmhpd SM8550_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             phys = <&dsi0_phy>;
             phy-names = "dsi";
@@ -294,7 +294,7 @@ examples:
             assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
 
             operating-points-v2 = <&dsi_opp_table>;
-            power-domains = <&rpmhpd SM8550_MMCX>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
 
             phys = <&dsi1_phy>;
             phy-names = "dsi";
diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
index bdbee58a542b..4233ea839bfc 100644
--- a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
+++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
@@ -176,6 +176,7 @@ allOf:
             contains:
               enum:
                 - qcom,scm-qdu1000
+                - qcom,scm-sc8280xp
                 - qcom,scm-sm8450
                 - qcom,scm-sm8550
     then:
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt
index 2a1d16bdf834..ea939f54c5eb 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt
@@ -6,7 +6,7 @@ controllers are OR:ed together and fed to the CPU tile's IRQ input. Each
 instance can handle up to 32 interrupts.
 
 Required properties:
-- compatib