Merge tag 'sound-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "As the diffstat shows, we've had lots of developments in a wide range
  at this time; the majority of changes are about ASoC, including
  subsystem-wide cleanups, continued SOF / Intel updates and a bunch of
  new drivers (as usual), while there have been some significant (but
  almost invisible) improvements in ALSA core side, too.

  Below are some highlights:

  Core:

   - Faster lookups of control elements with Xarray; normal user won't
     notice, but on the devices with tons of control elements, it can be
     visibly faster

   - Support for input validation for controls; this will harden for
     badly written drivers in general with a slight overhead

   - Deferred async signal handling for working around the potential
     deadlocks

   - Cleanup / refactoring raw MIDI locking code

  ASoC:

   - Restructing of the set_fmt() callbacks for making things clearer in
     situations like CODEC to CODEC links

   - Clean up and modernizing the DAI naming scheme setups

   - Merge of more of the Intel AVS driver stack, including some board
     integrations

   - New version 4 mechanism for communication with SOF DSPs

   - Suppoort for dynamically selecting the PLL to use at runtime on
     i.MX platforms

   - Improvements for CODEC to CODEC support in the generic cards

   - Support for AMD Jadeite and various machines, AMD RPL, Intel
     MetorLake DSPs, Mediatek MT8186 DSPs and MT6366, nVidia Tegra
     MDDRC, OPE and PEQ, NXP TFA9890, Qualcomm SDM845, WCD9335 and
     WAS883x, and Texas Instruments TAS2780

  HD- and USB-audio:

   - Continued improvement for CS35L41 (sub)codec support

   - More quirks for various devices (HP, Lenovo, Dell, Clevo)"

* tag 'sound-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (778 commits)
  ALSA: hda/realtek: Add quirk for HP Spectre x360 15-eb0xxx
  ALSA: line6: Replace sprintf() with sysfs_emit()
  ALSA: hda: Replace sprintf() with sysfs_emit()
  ALSA: pcm: Replace sprintf() with sysfs_emit()
  ALSA: core: Replace scnprintf() with sysfs_emit()
  ALSA: control-led: Replace sprintf() with sysfs_emit()
  ALSA: aoa: Replace sprintf() with sysfs_emit()
  ALSA: ac97: Replace sprintf() with sysfs_emit()
  ALSA: hda/realtek: Add quirk for Clevo NV45PZ
  ALSA: hda/realtek: Add quirk for Lenovo Yoga9 14IAP7
  ALSA: control: Use deferred fasync helper
  ALSA: pcm: Use deferred fasync helper
  ALSA: timer: Use deferred fasync helper
  ALSA: core: Add async signal helpers
  ASoC: q6asm: use kcalloc() instead of kzalloc()
  ACPI: scan: Add CLSA0101 Laptop Support
  ALSA: hda: cs35l41: Support CLSA0101
  ALSA: hda: cs35l41: Use the CS35L41 HDA internal define
  ASoC: dt-bindings: use spi-peripheral-props.yaml
  ASoC: codecs: va-macro: use fsgen as clock
  ...

39 files changed, 1223 insertions, 336 deletions

diff --git a/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml b/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml
new file mode 100644
index 000000000000..3e63f79890b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dsp/mediatek,mt8186-dsp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek mt8186 DSP core
+
+maintainers:
+  - Tinghan Shen <tinghan.shen@mediatek.com>
+
+description: |
+  MediaTek mt8186 SoC contains a DSP core used for
+  advanced pre- and post- audio processing.
+
+properties:
+  compatible:
+    const: mediatek,mt8186-dsp
+
+  reg:
+    items:
+      - description: Address and size of the DSP config registers
+      - description: Address and size of the DSP SRAM
+      - description: Address and size of the DSP secure registers
+      - description: Address and size of the DSP bus registers
+
+  reg-names:
+    items:
+      - const: cfg
+      - const: sram
+      - const: sec
+      - const: bus
+
+  clocks:
+    items:
+      - description: mux for audio dsp clock
+      - description: mux for audio dsp local bus
+
+  clock-names:
+    items:
+      - const: audiodsp
+      - const: adsp_bus
+
+  power-domains:
+    maxItems: 1
+
+  mboxes:
+    items:
+      - description: mailbox for receiving audio DSP requests.
+      - description: mailbox for transmitting requests to audio DSP.
+
+  mbox-names:
+    items:
+      - const: rx
+      - const: tx
+
+  memory-region:
+    items:
+      - description: dma buffer between host and DSP.
+      - description: DSP system memory.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - power-domains
+  - mbox-names
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8186-clk.h>
+    dsp@10680000 {
+        compatible = "mediatek,mt8186-dsp";
+        reg = <0x10680000 0x2000>,
+              <0x10800000 0x100000>,
+              <0x1068b000 0x100>,
+              <0x1068f000 0x1000>;
+        reg-names = "cfg", "sram", "sec", "bus";
+        clocks = <&topckgen CLK_TOP_AUDIODSP>,
+                 <&topckgen CLK_TOP_ADSP_BUS>;
+        clock-names = "audiodsp",
+                      "adsp_bus";
+        power-domains = <&spm 6>;
+        mbox-names = "rx", "tx";
+        mboxes = <&adsp_mailbox0>, <&adsp_mailbox1>;
+    };
diff --git a/Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml b/Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml
index b7e68b0dfa13..ca8d8661f872 100644
--- a/Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml
+++ b/Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml
@@ -50,13 +50,13 @@ properties:
 
   mboxes:
     items:
-      - description: ipc reply between host and audio DSP.
-      - description: ipc request between host and audio DSP.
+      - description: mailbox for receiving audio DSP requests.
+      - description: mailbox for transmitting requests to audio DSP.
 
   mbox-names:
     items:
-      - const: mbox0
-      - const: mbox1
+      - const: rx
+      - const: tx
 
   memory-region:
     items:
@@ -100,6 +100,6 @@ examples:
        memory-region = <&adsp_dma_mem_reserved>,
                        <&adsp_mem_reserved>;
        power-domains = <&spm 6>; //MT8195_POWER_DOMAIN_ADSP
-       mbox-names = "mbox0", "mbox1";
+       mbox-names = "rx", "tx";
        mboxes = <&adsp_mailbox0>, <&adsp_mailbox1>;
     };
diff --git a/Documentation/devicetree/bindings/sound/adi,adau1977.yaml b/Documentation/devicetree/bindings/sound/adi,adau1977.yaml
index b80454ad97da..847b83398d3d 100644
--- a/Documentation/devicetree/bindings/sound/adi,adau1977.yaml
+++ b/Documentation/devicetree/bindings/sound/adi,adau1977.yaml
@@ -32,8 +32,6 @@ properties:
   reset-gpios:
     maxItems: 1
 
-  spi-max-frequency: true
-
   AVDD-supply:
     description: Analog power support for the device.
 
@@ -52,7 +50,10 @@ required:
   - compatible
   - AVDD-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/sound/adi,max98396.yaml b/Documentation/devicetree/bindings/sound/adi,max98396.yaml
index ec4c10c2598a..8d2ef991db40 100644
--- a/Documentation/devicetree/bindings/sound/adi,max98396.yaml
+++ b/Documentation/devicetree/bindings/sound/adi,max98396.yaml
@@ -24,6 +24,21 @@ properties:
     maxItems: 1
     description: I2C address of the device.
 
+  avdd-supply:
+    description: A 1.8V supply that powers up the AVDD pin.
+
+  dvdd-supply:
+    description: A 1.2V supply that powers up the DVDD pin.
+
+  dvddio-supply:
+    description: A 1.2V or 1.8V supply that powers up the VDDIO pin.
+
+  pvdd-supply:
+    description: A 3.0V to 20V supply that powers up the PVDD pin.
+
+  vbat-supply:
+    description: A 3.3V to 5.5V supply that powers up the VBAT pin.
+
   adi,vmon-slot-no:
     description: slot number of the voltage sense monitor
     $ref: "/schemas/types.yaml#/definitions/uint32"
@@ -36,13 +51,22 @@ properties:
     $ref: "/schemas/types.yaml#/definitions/uint32"
     minimum: 0
     maximum: 15
-    default: 0
+    default: 1
 
   adi,spkfb-slot-no:
     description: slot number of speaker DSP monitor
     $ref: "/schemas/types.yaml#/definitions/uint32"
     minimum: 0
     maximum: 15
+    default: 2
+
+  adi,bypass-slot-no:
+    description:
+      Selects the PCM data input channel that is routed to the speaker
+      audio processing bypass path.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 15
     default: 0
 
   adi,interleave-mode:
@@ -72,6 +96,10 @@ examples:
         max98396: amplifier@39 {
             compatible = "adi,max98396";
             reg = <0x39>;
+            dvdd-supply = <&regulator_1v2>;
+            dvddio-supply = <&regulator_1v8>;
+            avdd-supply = <&regulator_1v8>;
+            pvdd-supply = <&regulator_pvdd>;
             adi,vmon-slot-no = <0>;
             adi,imon-slot-no = <1>;
             reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun50i-a64-codec-analog.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun50i-a64-codec-analog.yaml
index 3b764415c9ab..66859eb8f79a 100644
--- a/Documentation/devicetree/bindings/sound/allwinner,sun50i-a64-codec-analog.yaml
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun50i-a64-codec-analog.yaml
@@ -21,6 +21,11 @@ properties:
     description:
       Regulator for the headphone amplifier
 
+  allwinner,internal-bias-resistor:
+    description:
+      Enable the internal 2.2K bias resistor between HBIAS and MICDET pins
+    type: boolean
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/sound/atmel,sama5d2-classd.yaml b/Documentation/devicetree/bindings/sound/atmel,sama5d2-classd.yaml
new file mode 100644
index 000000000000..43d04702ac2d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/atmel,sama5d2-classd.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/atmel,sama5d2-classd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel ClassD Amplifier
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description:
+  The Audio Class D Amplifier (CLASSD) is a digital input, Pulse Width
+  Modulated (PWM) output stereo Class D amplifier.
+
+properties:
+  compatible:
+    const: atmel,sama5d2-classd
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: tx
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: gclk
+
+  atmel,model:
+    $ref: /schemas/types.yaml#/definitions/string
+    default: CLASSD
+    description: The user-visible name of this sound complex.
+
+  atmel,pwm-type:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - single
+      - diff
+    default: single
+    description: PWM modulation type.
+
+  atmel,non-overlap-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 5
+      - 10
+      - 15
+      - 20
+    default: 10
+    description:
+      Set non-overlapping time, the unit is nanosecond(ns).
+      Non-overlapping will be disabled if not specified.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+  - clock-names
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    classd: sound@fc048000 {
+        compatible = "atmel,sama5d2-classd";
+        reg = <0xfc048000 0x100>;
+        interrupts = <59 IRQ_TYPE_LEVEL_HIGH 7>;
+        dmas = <&dma0
+            (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+            | AT91_XDMAC_DT_PERID(47))>;
+        dma-names = "tx";
+        clocks = <&classd_clk>, <&classd_gclk>;
+        clock-names = "pclk", "gclk";
+        assigned-clocks = <&classd_gclk>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_classd_default>;
+        atmel,model = "classd @ SAMA5D2-Xplained";
+        atmel,pwm-type = "diff";
+        atmel,non-overlap-time = <10>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/atmel,sama5d2-i2s.yaml b/Documentation/devicetree/bindings/sound/atmel,sama5d2-i2s.yaml
new file mode 100644
index 000000000000..0cd1ff89baed
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/atmel,sama5d2-i2s.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/atmel,sama5d2-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel I2S controller
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description:
+  Atmel I2S (Inter-IC Sound Controller) bus is the standard
+  interface for connecting audio devices, such as audio codecs.
+
+properties:
+  compatible:
+    const: atmel,sama5d2-i2s
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Peripheral clock
+      - description: Generated clock (Optional)
+      - description: I2S mux clock (Optional). Set
+          with gclk when Master Mode is required.
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: gclk
+      - const: muxclk
+    minItems: 1
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2s@f8050000 {
+        compatible = "atmel,sama5d2-i2s";
+        reg = <0xf8050000 0x300>;
+        interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>;
+        dmas = <&dma0
+                (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+                AT91_XDMAC_DT_PERID(31))>,
+               <&dma0
+                (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+                AT91_XDMAC_DT_PERID(32))>;
+        dma-names = "tx", "rx";
+        clocks = <&i2s0_clk>, <&i2s0_gclk>, <&i2s0muxck>;
+        clock-names = "pclk", "gclk", "muxclk";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_i2s0_default>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/atmel,sama5d2-pdmic.yaml b/Documentation/devicetree/bindings/sound/atmel,sama5d2-pdmic.yaml
new file mode 100644
index 000000000000..f320b561f24c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/atmel,sama5d2-pdmic.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/atmel,sama5d2-pdmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel PDMIC decoder
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description:
+  Atmel Pulse Density Modulation Interface Controller
+  (PDMIC) peripheral is a mono PDM decoder module
+  that decodes an incoming PDM sample stream.
+
+properties:
+  compatible:
+    const: atmel,sama5d2-pdmic
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: peripheral clock
+      - description: generated clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: gclk
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rx
+
+  atmel,mic-min-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The minimal frequency that the microphone supports.
+
+  atmel,mic-max-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The maximal frequency that the microphone supports.
+
+  atmel,model:
+    $ref: /schemas/types.yaml#/definitions/string
+    default: PDMIC
+    description: The user-visible name of this sound card.
+
+  atmel,mic-offset:
+    $ref: /schemas/types.yaml#/definitions/int32
+    default: 0
+    description: The offset that should be added.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+  - clock-names
+  - clocks
+  - atmel,mic-min-freq
+  - atmel,mic-max-freq
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pdmic: sound@f8018000 {
+        compatible = "atmel,sama5d2-pdmic";
+        reg = <0xf8018000 0x124>;
+        interrupts = <48 IRQ_TYPE_LEVEL_HIGH 7>;
+        dmas = <&dma0
+                (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+                | AT91_XDMAC_DT_PERID(50))>;
+        dma-names = "rx";
+        clocks = <&pdmic_clk>, <&pdmic_gclk>;
+        clock-names = "pclk", "gclk";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_pdmic_default>;
+        atmel,model = "PDMIC@sama5d2_xplained";
+        atmel,mic-min-freq = <1000000>;
+        atmel,mic-max-freq = <3246000>;
+        atmel,mic-offset = <0x0>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/atmel-classd.txt b/Documentation/devicetree/bindings/sound/atmel-classd.txt
deleted file mode 100644
index 898551076382..000000000000
--- a/Documentation/devicetree/bindings/sound/atmel-classd.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-* Atmel ClassD driver under ALSA SoC architecture
-
-Required properties:
-- compatible
-	Should be "atmel,sama5d2-classd".
-- reg
-	Should contain ClassD registers location and length.
-- interrupts
-	Should contain the IRQ line for the ClassD.
-- dmas
-	One DMA specifiers as described in atmel-dma.txt and dma.txt files.
-- dma-names
-	Must be "tx".
-- clock-names
-	Tuple listing input clock names.
-	Required elements: "pclk" and "gclk".
-- clocks
-	Please refer to clock-bindings.txt.
-- assigned-clocks
-	Should be <&classd_gclk>.
-
-Optional properties:
-- pinctrl-names, pinctrl-0
-	Please refer to pinctrl-bindings.txt.
-- atmel,model
-	The user-visible name of this sound complex.
-	The default value is "CLASSD".
-- atmel,pwm-type
-	PWM modulation type, "single" or "diff".
-	The default value is "single".
-- atmel,non-overlap-time
-	Set non-overlapping time, the unit is nanosecond(ns).
-	There are four values,
-	<5>, <10>, <15>, <20>, the default value is <10>.
-	Non-overlapping will be disabled if not specified.
-
-Example:
-classd: classd@fc048000 {
-		compatible = "atmel,sama5d2-classd";
-		reg = <0xfc048000 0x100>;
-		interrupts = <59 IRQ_TYPE_LEVEL_HIGH 7>;
-		dmas = <&dma0
-			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
-			| AT91_XDMAC_DT_PERID(47))>;
-		dma-names = "tx";
-		clocks = <&classd_clk>, <&classd_gclk>;
-		clock-names = "pclk", "gclk";
-		assigned-clocks = <&classd_gclk>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_classd_default>;
-		atmel,model = "classd @ SAMA5D2-Xplained";
-		atmel,pwm-type = "diff";
-		atmel,non-overlap-time = <10>;
-};
diff --git a/Documentation/devicetree/bindings/sound/atmel-i2s.txt b/Documentation/devicetree/bindings/sound/atmel-i2s.txt
deleted file mode 100644
index 40549f496a81..000000000000
--- a/Documentation/devicetree/bindings/sound/atmel-i2s.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-* Atmel I2S controller
-
-Required properties:
-- compatible:     Should be "atmel,sama5d2-i2s".
-- reg:            Should be the physical base address of the controller and the
-                  length of memory mapped region.
-- interrupts:     Should contain the interrupt for the controller.
-- dmas:           Should be one per channel name listed in the dma-names property,
-                  as described in atmel-dma.txt and dma.txt files.
-- dma-names:      Two dmas have to be defined, "tx" and "rx".
-                  This IP also supports one shared channel for both rx and tx;
-                  if this mode is used, one "rx-tx" name must be used.
-- clocks:         Must contain an entry for each entry in clock-names.
-                  Please refer to clock-bindings.txt.
-- clock-names:    Should be one of each entry matching the clocks phandles list:
-                  - "pclk" (peripheral clock) Required.
-                  - "gclk" (generated clock) Optional (1).
-                  - "muxclk" (I2S mux clock) Optional (1).
-
-Optional properties:
-- pinctrl-0:      Should specify pin control groups used for this controller.
-- princtrl-names: Should contain only one value - "default".
-
-
-(1) : Only the peripheral clock is required. The generated clock and the I2S
-      mux clock are optional and should only be set together, when Master Mode
-      is required.
-
-Example:
-
-	i2s@f8050000 {
-		compatible = "atmel,sama5d2-i2s";
-		reg = <0xf8050000 0x300>;
-		interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>;
-		dmas = <&dma0
-			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-			 AT91_XDMAC_DT_PERID(31))>,
-		       <&dma0
-			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-			 AT91_XDMAC_DT_PERID(32))>;
-		dma-names = "tx", "rx";
-		clocks = <&i2s0_clk>, <&i2s0_gclk>, <&i2s0muxck>;
-		clock-names = "pclk", "gclk", "muxclk";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2s0_default>;
-	};
diff --git a/Documentation/devicetree/bindings/sound/atmel-pdmic.txt b/Documentation/devicetree/bindings/sound/atmel-pdmic.txt
deleted file mode 100644
index e0875f17c229..000000000000
--- a/Documentation/devicetree/bindings/sound/atmel-pdmic.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-* Atmel PDMIC driver under ALSA SoC architecture
-
-Required properties:
-- compatible
-	Should be "atmel,sama5d2-pdmic".
-- reg
-	Should contain PDMIC registers location and length.
-- interrupts
-	Should contain the IRQ line for the PDMIC.
-- dmas
-	One DMA specifiers as described in atmel-dma.txt and dma.txt file