Merge tag 'qcom-arm64-for-6.3-3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Last set of Qualcomm ARM64 DTS updates for v6.3

This introduces additional DisplayPort controllers and pmic_glink on
SC8280XP (8cx Gen3), which provides support for USB Type-C-based
displays on the the Lenovo ThinkPad X13s and the compute reference
device. The pmic_glink also provides battery and power supply status.

Interrupt-parents are corrected across the SC8280XP PMICs, to allow
non-Linux OSs to properly handle interrupts in the various blocks
therein.

It cleans up the SM8350 base dtsi and introduces GPU support on this
platform, as well as enable this for the Hardware Development Kit (HDK).
It enables i2c busses on the Fairphone FP4

Lastly it aligns glink node names with bindings across a few platforms,
and corrects the compatible for the PON block in the pmk8350 PMIC.

* tag 'qcom-arm64-for-6.3-3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  arm64: dts: qcom: msm8996: align RPM G-Link clock-controller node with bindings
  arm64: dts: qcom: qcs404: align RPM G-Link node with bindings
  arm64: dts: qcom: ipq6018: align RPM G-Link node with bindings
  arm64: dts: qcom: sm8550: remove invalid interconnect property from cryptobam
  arm64: dts: qcom: sc7280: Adjust zombie PWM frequency
  arm64: dts: qcom: sc8280xp-pmics: Specify interrupt parent explicitly
  arm64: dts: qcom: sm7225-fairphone-fp4: enable remaining i2c busses
  arm64: dts: qcom: sm7225-fairphone-fp4: move status property down
  arm64: dts: qcom: pmk8350: Use the correct PON compatible
  arm64: dts: qcom: sc8280xp-x13s: Enable external display
  arm64: dts: qcom: sc8280xp-crd: Introduce pmic_glink
  arm64: dts: qcom: sc8280xp: Add USB-C-related DP blocks
  arm64: dts: qcom: sm8350-hdk: enable GPU
  arm64: dts: qcom: sm8350: add GPU, GMU, GPU CC and SMMU nodes
  arm64: dts: qcom: sm8350: finish reordering nodes
  arm64: dts: qcom: sm8350: move more nodes to correct place
  arm64: dts: qcom: sm8350: reorder device nodes

Link: https://lore.kernel.org/r/20230215051530.1165953-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

13 files changed, 1519 insertions, 753 deletions

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index d32c9b2515ee..bbd94025ff5d 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -176,7 +176,7 @@
 		qcom,rpm-msg-ram = <&rpm_msg_ram>;
 		mboxes = <&apcs_glb 0>;
 
-		rpm_requests: glink-channel {
+		rpm_requests: rpm-requests {
 			compatible = "qcom,rpm-ipq6018";
 			qcom,glink-channels = "rpm_requests";
 
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 6f180a8efe77..905678e7175d 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -483,7 +483,7 @@
 			compatible = "qcom,rpm-msm8996";
 			qcom,glink-channels = "rpm_requests";
 
-			rpmcc: qcom,rpmcc {
+			rpmcc: clock-controller {
 				compatible = "qcom,rpmcc-msm8996", "qcom,rpmcc";
 				#clock-cells = <1>;
 				clocks = <&xo_board>;
diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
index 32f5e6af8c11..f26fb7d32faf 100644
--- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
@@ -21,7 +21,7 @@
 		#size-cells = <0>;
 
 		pmk8350_pon: pon@1300 {
-			compatible = "qcom,pm8998-pon";
+			compatible = "qcom,pmk8350-pon";
 			reg = <0x1300>, <0x800>;
 			reg-names = "hlos", "pbs";
 
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 9c9890cf1b10..bc2ed73afb74 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -223,7 +223,7 @@
 		qcom,rpm-msg-ram = <&rpm_msg_ram>;
 		mboxes = <&apcs_glb 0>;
 
-		rpm_requests: glink-channel {
+		rpm_requests: rpm-requests {
 			compatible = "qcom,rpm-qcs404";
 			qcom,glink-channels = "rpm_requests";
 
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi
index 64deaaabac0f..a4fde22e3355 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi
@@ -61,8 +61,8 @@ ap_tp_i2c: &i2c0 {
 };
 
 &pm8350c_pwm_backlight {
-	/* Set the PWM period to 200 microseconds (5kHz duty cycle) */
-	pwms = <&pm8350c_pwm 3 200000>;
+	/* Set the PWM period to 320 microseconds (3.125kHz frequency) */
+	pwms = <&pm8350c_pwm 3 320000>;
 };
 
 &pwmleds {
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index 2179c06b4e3b..98a0f1f9f01e 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -36,6 +36,84 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	pmic-glink {
+		compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_con0_hs: endpoint {
+						remote-endpoint = <&usb_0_role_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_con0_ss: endpoint {
+						remote-endpoint = <&mdss0_dp0_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_con0_sbu: endpoint {
+						remote-endpoint = <&usb0_sbu_mux>;
+					};
+				};
+			};
+		};
+
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_con1_hs: endpoint {
+						remote-endpoint = <&usb_1_role_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_con1_ss: endpoint {
+						remote-endpoint = <&mdss0_dp1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_con1_sbu: endpoint {
+						remote-endpoint = <&usb1_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
 	vreg_edp_3p3: regulator-edp-3p3 {
 		compatible = "regulator-fixed";
 
@@ -139,6 +217,46 @@
 			linux,cma-default;
 		};
 	};
+
+	usb0-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb0_sbu_default>;
+
+		mode-switch;
+		orientation-switch;
+		svid = /bits/ 16 <0xff01>;
+
+		port {
+			usb0_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con0_sbu>;
+			};
+		};
+	};
+
+	usb1-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb1_sbu_default>;
+
+		mode-switch;
+		orientation-switch;
+		svid = /bits/ 16 <0xff01>;
+
+		port {
+			usb1_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con1_sbu>;
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -262,6 +380,24 @@
 	status = "okay";
 };
 
+&mdss0_dp0 {
+	status = "okay";
+};
+
+&mdss0_dp0_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&pmic_glink_con0_ss>;
+};
+
+&mdss0_dp1 {
+	status = "okay";
+};
+
+&mdss0_dp1_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&pmic_glink_con1_ss>;
+};
+
 &mdss0_dp3 {
 	compatible = "qcom,sc8280xp-edp";
 	/delete-property/ #sound-dai-cells;
@@ -480,7 +616,6 @@
 };
 
 &usb_0_dwc3 {
-	/* TODO: Define USB-C connector properly */
 	dr_mode = "host";
 };
 
@@ -499,12 +634,15 @@
 	status = "okay";
 };
 
+&usb_0_role_switch {
+	remote-endpoint = <&pmic_glink_con0_hs>;
+};
+
 &usb_1 {
 	status = "okay";
 };
 
 &usb_1_dwc3 {
-	/* TODO: Define USB-C connector properly */
 	dr_mode = "host";
 };
 
@@ -523,6 +661,10 @@
 	status = "okay";
 };
 
+&usb_1_role_switch {
+	remote-endpoint = <&pmic_glink_con1_hs>;
+};
+
 &xo_board_clk {
 	clock-frequency = <38400000>;
 };
@@ -709,4 +851,54 @@
 			drive-strength = <16>;
 		};
 	};
+
+	usb0_sbu_default: usb0-sbu-state {
+		oe-n-pins {
+			pins = "gpio101";
+			function = "gpio";
+			bias-disable;
+			drive-strengh = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio164";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		mode-pins {
+			pins = "gpio167";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+	};
+
+	usb1_sbu_default: usb1-sbu-state {
+		oe-n-pins {
+			pins = "gpio48";
+			function = "gpio";
+			bias-disable;
+			drive-strengh = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio47";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		mode-pins {
+			pins = "gpio50";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 654b6b310bc9..98e71b933437 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -77,6 +77,84 @@
 		};
 	};
 
+	pmic-glink {
+		compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_con0_hs: endpoint {
+						remote-endpoint = <&usb_0_role_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_con0_ss: endpoint {
+						remote-endpoint = <&mdss0_dp0_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_con0_sbu: endpoint {
+						remote-endpoint = <&usb0_sbu_mux>;
+					};
+				};
+			};
+		};
+
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_con1_hs: endpoint {
+						remote-endpoint = <&usb_1_role_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_con1_ss: endpoint {
+						remote-endpoint = <&mdss0_dp1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_con1_sbu: endpoint {
+						remote-endpoint = <&usb1_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
 	vreg_edp_3p3: regulator-edp-3p3 {
 		compatible = "regulator-fixed";
 
@@ -238,6 +316,46 @@
 			};
 		};
 	};
+
+	usb0-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb0_sbu_default>;
+
+		mode-switch;
+		orientation-switch;
+		svid = /bits/ 16 <0xff01>;
+
+		port {
+			usb0_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con0_sbu>;
+			};
+		};
+	};
+
+	usb1-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb1_sbu_default>;
+
+		mode-switch;
+		orientation-switch;
+		svid = /bits/ 16 <0xff01>;
+
+		port {
+			usb1_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con1_sbu>;
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -377,6 +495,24 @@
 	status = "okay";
 };
 
+&mdss0_dp0 {
+	status = "okay";
+};
+
+&mdss0_dp0_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&pmic_glink_con0_ss>;
+};
+
+&mdss0_dp1 {
+	status = "okay";
+};
+
+&mdss0_dp1_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&pmic_glink_con1_ss>;
+};
+
 &mdss0_dp3 {
 	compatible = "qcom,sc8280xp-edp";
 
@@ -871,7 +1007,6 @@
 };
 
 &usb_0_dwc3 {
-	/* TODO: Define USB-C connector properly */
 	dr_mode = "host";
 };
 
@@ -890,12 +1025,15 @@
 	status = "okay";
 };
 
+&usb_0_role_switch {
+	remote-endpoint = <&pmic_glink_con0_hs>;
+};
+
 &usb_1 {
 	status = "okay";
 };
 
 &usb_1_dwc3 {
-	/* TODO: Define USB-C connector properly */
 	dr_mode = "host";
 };
 
@@ -914,6 +1052,10 @@
 	status = "okay";
 };
 
+&usb_1_role_switch {
+	remote-endpoint = <&pmic_glink_con1_hs>;
+};
+
 &vamacro {
 	pinctrl-0 = <&dmic01_default>, <&dmic02_default>;
 	pinctrl-names = "default";
@@ -1147,6 +1289,40 @@
 		};
 	};
 
+	usb0_sbu_default: usb0-sbu-state {
+		oe-n-pins {
+			pins = "gpio101";
+			function = "gpio";
+			bias-disable;
+			drive-strengh = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio164";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+	};
+
+	usb1_sbu_default: usb1-sbu-state {
+		oe-n-pins {
+			pins = "gpio48";
+			function = "gpio";
+			bias-disable;
+			drive-strengh = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio47";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+	};
+
 	wcd_default: wcd-default-state {
 		reset-pins {
 			pins = "gpio106";
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
index f2c0b71b5d8e..df7d28f7ae60 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
@@ -64,14 +64,14 @@
 
 			pmk8280_pon_pwrkey: pwrkey {
 				compatible = "qcom,pmk8350-pwrkey";
-				interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
+				interrupts-extended = <&spmi_bus 0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
 				linux,code = <KEY_POWER>;
 				status = "disabled";
 			};
 
 			pmk8280_pon_resin: resin {
 				compatible = "qcom,pmk8350-resin";
-				interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
+				interrupts-extended = <&spmi_bus 0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
 				status = "disabled";
 			};
 		};
@@ -79,7 +79,7 @@
 		pmk8280_vadc: adc@3100 {
 			compatible = "qcom,spmi-adc7";
 			reg = <0x3100>;
-			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			interrupts-extended = <&spmi_bus 0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#io-channel-cells = <1>;
@@ -89,7 +89,7 @@
 		pmk8280_adc_tm: adc-tm@3400 {
 			compatible = "qcom,spmi-adc-tm5-gen2";
 			reg = <0x3400>;
-			interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+			interrupts-extended = <&spmi_bus 0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#thermal-sensor-cells = <1>;
@@ -106,7 +106,7 @@
 		pm8280_1_temp_alarm: temp-alarm@a00 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0xa00>;
-			interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			interrupts-extended = <&spmi_bus 0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
 			#thermal-sensor-cells = <0>;
 		};
 
@@ -158,7 +158,7 @@
 		pm8280_2_temp_alarm: temp-alarm@a00 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0xa00>;
-			interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			interrupts-extended = <&spmi_bus 0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
 			#thermal-sensor-cells = <0>;
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 52172f79f2f2..0d02599d8867 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -3040,6 +3040,11 @@
 				iommus = <&apps_smmu 0x820 0x0>;
 				phys = <&usb_0_hsphy>, <&usb_0_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
+
+				port {
+					usb_0_role_switch: endpoint {
+					};
+				};
 			};
 		};
 
@@ -3095,6 +3100,11 @@
 				iommus = <&apps_smmu 0x860 0x0>;
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
+
+				port {
+					usb_1_role_switch: endpoint {
+					};
+				};
 			};
 		};
 
@@ -3155,6 +3165,20 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 
+					port@0 {
+						reg = <0>;
+						mdss0_intf0_out: endpoint {
+							remote-endpoint = <&mdss0_dp0_in>;
+						};
+					};
+
+					port@4 {
+						reg = <4>;
+						mdss0_intf4_out: endpoint {
+							remote-endpoint = <&mdss0_dp1_in>;
+						};
+					};
+
 					port@5 {
 						reg = <5>;
 						mdss0_intf5_out: endpoint {
@@ -3199,6 +3223,163 @@
 				};
 			};
 
+			mdss0_dp0: displayport-controller@ae90000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0xae90000 0 0x200>,
+				      <0 0xae90200 0 0x200>,
+				      <0 0xae90400 0 0x600>,
+				      <0 0xae91000 0 0x400>,
+				      <0 0xae91400 0 0x400>;
+				interrupt-parent = <&mdss0>;
+				interrupts = <12>;
+				clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+						  <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&usb_0_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				phys = <&usb_0_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&mdss0_dp0_opp_table>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss0_dp0_in: endpoint {
+							remote-endpoint = <&mdss0_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss0_dp0_out: endpoint {
+						};
+					};
+				};
+
+				mdss0_dp0_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss0_dp1: displayport-controller@ae98000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0xae98000 0 0x200>,
+				      <0 0xae98200 0 0x200>,
+				      <0 0xae98400 0 0x600>,
+				      <0 0xae99000 0 0x400>,
+				      <0 0xae99400 0 0x400>;
+				interrupt-parent = <&mdss0>;
+				interrupts = <13>;
+				clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX1_AUX_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+
+				assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
+						  <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&mdss0_dp1_opp_table>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss0_dp1_in: endpoint {
+							remote-endpoint = <&mdss0_intf4_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss0_dp1_out: endpoint {
+						};
+					};
+				};
+
+				mdss0_dp1_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
 			mdss0_dp2: displayport-controller@ae9a000 {
 				compatible = "qcom,sc8280xp-dp";
 				reg = <0 0xae9a000 0 0x200>,
@@ -3387,10 +3568,10 @@
 			clocks = <&gcc GCC_DISP_AHB_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&sleep_clk>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
+				 <&usb_0_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 				 <&mdss0_dp2_phy 0>,
 				 <&mdss0_dp2_phy 1>,
 				 <&mdss0_dp3_phy 0>,
diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
index f7602e93121a..7ae6aba5d2ec 100644
--- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
+++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@@ -110,8 +110,8 @@
 };
 
 &adsp {
-	status = "okay";
 	firmware-name = "qcom/sm7225/fairphone4/adsp.mdt";
+	status = "okay";
 };
 
 &apps_rsc {
@@ -355,13 +355,42 @@
 };
 
 &cdsp {
-	status = "okay";
 	firmware-name = "qcom/sm7225/fairphone4/cdsp.mdt";
+	status = "okay";
 };
 
-&i2c10 {
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
 	status = "okay";
+};
+
+&i2c0 {
 	clock-frequency = <400000>;
+	status = "okay";
+
+	/* ST21NFCD NFC @ 8 */
+	/* VL53L3 ToF @ 29 */
+	/* AW88264A amplifier @ 34 */
+	/* AW88264A amplifier @ 35 */
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* HX83112A touchscreen @ 48 */
+};
+
+&i2c10 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* PM8008 PMIC @ 8 and 9 */
+	/* PX8618 @ 26 */
+	/* SMB1395 PMIC @ 34 */
 
 	haptics@5a {
 		compatible = "awinic,aw8695";
@@ -396,8 +425,8 @@
 };
 
 &mpss {
-	status = "okay";
 	firmware-name = "qcom/sm7225/fairphone4/modem.mdt";
+	status = "okay";
 };
 
 &pm6150l_flash {
@@ -423,11 +452,11 @@
 };
 
 &pm6150l_wled {
-	status = "okay";
-
 	qcom,switching-freq = <800>;
 	qcom,current-limit-microamp = <20000>;
 	qcom,num-strings = <2>;
+
+	status = "okay";
 };
 
 &pm6350_gpios {
@@ -441,8 +470,8 @@
 };
 
 &pm6350_resin {
-	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
 };
 
 &pm7250b_adc {
@@ -495,6 +524,10 @@
 	};
 };
 
+&qupv3_id_0 {
+	status = "okay";
+};
+
 &qupv3_id_1 {
 	status = "okay";
 };
@@ -535,21 +568,21 @@
 };
 
 &ufs_mem_hc {
-	status = "okay";
-
 	reset-gpios = <&tlmm 156 GPIO_ACTIVE_LOW>;
 
 	vcc-supply = <&vreg_l7e>;
 	vcc-max-microamp = <800000>;
 	vccq2-supply = <&vreg_l12a>;
 	vccq2-max-microamp = <800000>;
-};
 
-&ufs_mem_phy {
 	status = "okay";
+};
 
+&ufs_mem_phy {
 	vdda-phy-supply = <&vreg_l18a>;
 	vdda-pll-supply = <&vreg_l22a>;
+
+	status = "okay";
 };
 
 &usb_1 {
@@ -562,26 +595,26 @@
 };
 
 &usb_1_hsphy {
-	status = "okay";
-
 	vdd-supply = <&vreg_l18a>;
 	vdda-pll-supply = <&vreg_l2a>;
 	vdda-phy-dpdm-supply = <&vreg_l3a>;
-};
 
-&usb_1_qmpphy {
 	status = "okay";
+};
 
+&usb_1_qmpphy {
 	vdda-phy-supply = <&vreg_l22a>;
 	vdda-pll-supply = <&vreg_l16a>;
-};
 
-&wifi {
 	status = "okay";
+};
 
+&wifi {
 	vdd-0.8-cx-mx-supply = <&vreg_l4a>;
 	vdd-1.8-xo-supply = <&vreg_l7a>;
 	vdd-1.3-rfa-supply = <&vreg_l2e>;
 	vdd-3.3-ch0-supply = <&vreg_l10e>;
 	vdd-3.3-ch1-supply = <&vreg_l11e>;
+
+	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index 54654eb75c28..09baf6959c71 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -284,6 +284,14 @@
 	status = "okay";
 };
 
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/sm8350/a660_zap.mbn";
+	};
+};
+
 &i2c15 {
 	clock-frequency = <400000>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 0a422637b61f..1c97e28da6ad 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/