Merge tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Slightly late as I had to rebase mid-week to insert a bug fix:

   - A large series from Nick for 64-bit to further rework our exception
     vectors, and rewrite portions of the syscall entry/exit and
     interrupt return in C. The result is much easier to follow code
     that is also faster in general.

   - Cleanup of our ptrace code to split various parts out that had
     become badly intertwined with #ifdefs over the years.

   - Changes to our NUMA setup under the PowerVM hypervisor which should
     hopefully avoid non-sensical topologies which can lead to warnings
     from the workqueue code and other problems.

   - MAINTAINERS updates to remove some of our old orphan entries and
     update the status of others.

   - Quite a few other small changes and fixes all over the map.

  Thanks to: Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew
  Donnellan, Aneesh Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen
  Zhou, Christophe JAILLET, Christophe Leroy, Christoph Hellwig, Clement
  Courbet, Daniel Axtens, David Gibson, Douglas Miller, Fabiano Rosas,
  Fangrui Song, Ganesh Goudar, Gautham R. Shenoy, Greg Kroah-Hartman,
  Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie Halip, Jan Kara,
  Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger, Laurentiu Tudor,
  Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh Salgaonkar,
  Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira, Michael
  Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan
  Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick
  Desaulniers, Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat,
  Rasmus Villemoes, Ravi Bangoria, Roman Bolshakov, Sam Bobroff,
  Sandipan Das, Santosh S, Sedat Dilek, Segher Boessenkool, Shilpasri G
  Bhat, Sourabh Jain, Srikar Dronamraju, Stephen Rothwell, Tyrel
  Datwyler, Vaibhav Jain, YueHaibing"

* tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (158 commits)
  powerpc: Make setjmp/longjmp signature standard
  powerpc/cputable: Remove unnecessary copy of cpu_spec->oprofile_type
  powerpc: Suppress .eh_frame generation
  powerpc: Drop -fno-dwarf2-cfi-asm
  powerpc/32: drop unused ISA_DMA_THRESHOLD
  powerpc/powernv: Add documentation for the opal sensor_groups sysfs interfaces
  selftests/powerpc: Fix try-run when source tree is not writable
  powerpc/vmlinux.lds: Explicitly retain .gnu.hash
  powerpc/ptrace: move ptrace_triggered() into hw_breakpoint.c
  powerpc/ptrace: create ppc_gethwdinfo()
  powerpc/ptrace: create ptrace_get_debugreg()
  powerpc/ptrace: split out ADV_DEBUG_REGS related functions.
  powerpc/ptrace: move register viewing functions out of ptrace.c
  powerpc/ptrace: split out TRANSACTIONAL_MEM related functions.
  powerpc/ptrace: split out SPE related functions.
  powerpc/ptrace: split out ALTIVEC related functions.
  powerpc/ptrace: split out VSX related functions.
  powerpc/ptrace: drop PARAMETER_SAVE_AREA_OFFSET
  powerpc/ptrace: drop unnecessary #ifdefs CONFIG_PPC64
  powerpc/ptrace: remove unused header includes
  ...

1 files changed, 24 insertions, 121 deletions

diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index 17cb3e9b5697..7cdcb413bb44 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -1107,87 +1107,43 @@ static int eeh_init(void)
 core_initcall_sync(eeh_init);
 
 /**
- * eeh_add_device_early - Enable EEH for the indicated device node
- * @pdn: PCI device node for which to set up EEH
- *
- * This routine must be used to perform EEH initialization for PCI
- * devices that were added after system boot (e.g. hotplug, dlpar).
- * This routine must be called before any i/o is performed to the
- * adapter (inluding any config-space i/o).
- * Whether this actually enables EEH or not for this device depends
- * on the CEC architecture, type of the device, on earlier boot
- * command-line arguments & etc.
- */
-void eeh_add_device_early(struct pci_dn *pdn)
-{
-	struct pci_controller *phb = pdn ? pdn->phb : NULL;
-	struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
-
-	if (!edev)
-		return;
-
-	if (!eeh_has_flag(EEH_PROBE_MODE_DEVTREE))
-		return;
-
-	/* USB Bus children of PCI devices will not have BUID's */
-	if (NULL == phb ||
-	    (eeh_has_flag(EEH_PROBE_MODE_DEVTREE) && 0 == phb->buid))
-		return;
-
-	eeh_ops->probe(pdn, NULL);
-}
-
-/**
- * eeh_add_device_tree_early - Enable EEH for the indicated device
- * @pdn: PCI device node
- *
- * This routine must be used to perform EEH initialization for the
- * indicated PCI device that was added after system boot (e.g.
- * hotplug, dlpar).
- */
-void eeh_add_device_tree_early(struct pci_dn *pdn)
-{
-	struct pci_dn *n;
-
-	if (!pdn)
-		return;
-
-	list_for_each_entry(n, &pdn->child_list, list)
-		eeh_add_device_tree_early(n);
-	eeh_add_device_early(pdn);
-}
-EXPORT_SYMBOL_GPL(eeh_add_device_tree_early);
-
-/**
- * eeh_add_device_late - Perform EEH initialization for the indicated pci device
+ * eeh_probe_device() - Perform EEH initialization for the indicated pci device
  * @dev: pci device for which to set up EEH
  *
  * This routine must be used to complete EEH initialization for PCI
  * devices that were added after system boot (e.g. hotplug, dlpar).
  */
-void eeh_add_device_late(struct pci_dev *dev)
+void eeh_probe_device(struct pci_dev *dev)
 {
-	struct pci_dn *pdn;
 	struct eeh_dev *edev;
 
-	if (!dev)
+	pr_debug("EEH: Adding device %s\n", pci_name(dev));
+
+	/*
+	 * pci_dev_to_eeh_dev() can only work if eeh_probe_dev() was
+	 * already called for this device.
+	 */
+	if (WARN_ON_ONCE(pci_dev_to_eeh_dev(dev))) {
+		pci_dbg(dev, "Already bound to an eeh_dev!\n");
 		return;
+	}
 
-	pdn = pci_get_pdn_by_devfn(dev->bus, dev->devfn);
-	edev = pdn_to_eeh_dev(pdn);
-	eeh_edev_dbg(edev, "Adding device\n");
-	if (edev->pdev == dev) {
-		eeh_edev_dbg(edev, "Device already referenced!\n");
+	edev = eeh_ops->probe(dev);
+	if (!edev) {
+		pr_debug("EEH: Adding device failed\n");
 		return;
 	}
 
 	/*
-	 * The EEH cache might not be removed correctly because of
-	 * unbalanced kref to the device during unplug time, which
-	 * relies on pcibios_release_device(). So we have to remove
-	 * that here explicitly.
+	 * FIXME: We rely on pcibios_release_device() to remove the
+	 * existing EEH state. The release function is only called if
+	 * the pci_dev's refcount drops to zero so if something is
+	 * keeping a ref to a device (e.g. a filesystem) we need to
+	 * remove the old EEH state.
+	 *
+	 * FIXME: HEY MA, LOOK AT ME, NO LOCKING!
 	 */
-	if (edev->pdev) {
+	if (edev->pdev && edev->pdev != dev) {
 		eeh_rmv_from_parent_pe(edev);
 		eeh_addr_cache_rmv_dev(edev->pdev);
 		eeh_sysfs_remove_device(edev->pdev);
@@ -1198,69 +1154,16 @@ void eeh_add_device_late(struct pci_dev *dev)
 		 * into error handler afterwards.
 		 */
 		edev->mode |= EEH_DEV_NO_HANDLER;
-
-		edev->pdev = NULL;
-		dev->dev.archdata.edev = NULL;
 	}
 
-	if (eeh_has_flag(EEH_PROBE_MODE_DEV))
-		eeh_ops->probe(pdn, NULL);
-
+	/* bind the pdev and the edev together */
 	edev->pdev = dev;
 	dev->dev.archdata.edev = edev;
-
 	eeh_addr_cache_insert_dev(dev);
+	eeh_sysfs_add_device(dev);
 }
 
 /**
- * eeh_add_device_tree_late - Perform EEH initialization for the indicated PCI bus
- * @bus: PCI bus
- *
- * This routine must be used to perform EEH initialization for PCI
- * devices which are attached to the indicated PCI bus. The PCI bus
- * is added after system boot through hotplug or dlpar.
- */
-void eeh_add_device_tree_late(struct pci_bus *bus)
-{
-	struct pci_dev *dev;
-
-	if (eeh_has_flag(EEH_FORCE_DISABLED))
-		return;
-	list_for_each_entry(dev, &bus->devices, bus_list) {
-		eeh_add_device_late(dev);
-		if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
-			struct pci_bus *subbus = dev->subordinate;
-			if (subbus)
-				eeh_add_device_tree_late(subbus);
-		}
-	}
-}
-EXPORT_SYMBOL_GPL(eeh_add_device_tree_late);
-
-/**
- * eeh_add_sysfs_files - Add EEH sysfs files for the indicated PCI bus
- * @bus: PCI bus
- *
- * This routine must be used to add EEH sysfs files for PCI
- * devices which are attached to the indicated PCI bus. The PCI bus
- * is added after system boot through hotplug or dlpar.
- */
-void eeh_add_sysfs_files(struct pci_bus *bus)
-{
-	struct pci_dev *dev;
-
-	list_for_each_entry(dev, &bus->devices, bus_list) {
-		eeh_sysfs_add_device(dev);
-		if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
-			struct pci_bus *subbus = dev->subordinate;
-			if (subbus)
-				eeh_add_sysfs_files(subbus);
-		}
-	}
-}
-EXPORT_SYMBOL_GPL(eeh_add_sysfs_files);
-
-/**
  * eeh_remove_device - Undo EEH setup for the indicated pci device
  * @dev: pci device to be removed
  *