Merge tag 'v4.2-rc8' into x86/mm, before applying new changes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

109 files changed, 5570 insertions, 7751 deletions

diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 9bcd0b56ca17..0f15af41bd80 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -22,7 +22,7 @@ KASAN_SANITIZE_dumpstack_$(BITS).o := n
 
 CFLAGS_irq.o := -I$(src)/../include/asm/trace
 
-obj-y			:= process_$(BITS).o signal.o entry_$(BITS).o
+obj-y			:= process_$(BITS).o signal.o
 obj-y			+= traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o
 obj-y			+= time.o ioport.o ldt.o dumpstack.o nmi.o
 obj-y			+= setup.o x86_init.o i8259.o irqinit.o jump_label.o
@@ -31,9 +31,6 @@ obj-y			+= probe_roms.o
 obj-$(CONFIG_X86_32)	+= i386_ksyms_32.o
 obj-$(CONFIG_X86_64)	+= sys_x86_64.o x8664_ksyms_64.o
 obj-$(CONFIG_X86_64)	+= mcount_64.o
-obj-y			+= syscall_$(BITS).o vsyscall_gtod.o
-obj-$(CONFIG_IA32_EMULATION)	+= syscall_32.o
-obj-$(CONFIG_X86_VSYSCALL_EMULATION)	+= vsyscall_64.o vsyscall_emu_64.o
 obj-$(CONFIG_X86_ESPFIX64)	+= espfix_64.o
 obj-$(CONFIG_SYSFS)	+= ksysfs.o
 obj-y			+= bootflag.o e820.o
@@ -44,7 +41,7 @@ obj-y			+= pci-iommu_table.o
 obj-y			+= resource.o
 
 obj-y				+= process.o
-obj-y				+= i387.o xsave.o
+obj-y				+= fpu/
 obj-y				+= ptrace.o
 obj-$(CONFIG_X86_32)		+= tls.o
 obj-$(CONFIG_IA32_EMULATION)	+= tls.o
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index dbe76a14c3c9..e49ee24da85e 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -31,12 +31,12 @@
 #include <linux/module.h>
 #include <linux/dmi.h>
 #include <linux/irq.h>
-#include <linux/irqdomain.h>
 #include <linux/slab.h>
 #include <linux/bootmem.h>
 #include <linux/ioport.h>
 #include <linux/pci.h>
 
+#include <asm/irqdomain.h>
 #include <asm/pci_x86.h>
 #include <asm/pgtable.h>
 #include <asm/io_apic.h>
@@ -400,57 +400,13 @@ static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int trigger,
 	return 0;
 }
 
-static int mp_register_gsi(struct device *dev, u32 gsi, int trigger,
-			   int polarity)
-{
-	int irq, node;
-
-	if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
-		return gsi;
-
-	trigger = trigger == ACPI_EDGE_SENSITIVE ? 0 : 1;
-	polarity = polarity == ACPI_ACTIVE_HIGH ? 0 : 1;
-	node = dev ? dev_to_node(dev) : NUMA_NO_NODE;
-	if (mp_set_gsi_attr(gsi, trigger, polarity, node)) {
-		pr_warn("Failed to set pin attr for GSI%d\n", gsi);
-		return -1;
-	}
-
-	irq = mp_map_gsi_to_irq(gsi, IOAPIC_MAP_ALLOC);
-	if (irq < 0)
-		return irq;
-
-	/* Don't set up the ACPI SCI because it's already set up */
-	if (enable_update_mptable && acpi_gbl_FADT.sci_interrupt != gsi)
-		mp_config_acpi_gsi(dev, gsi, trigger, polarity);
-
-	return irq;
-}
-
-static void mp_unregister_gsi(u32 gsi)
-{
-	int irq;
-
-	if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
-		return;
-
-	irq = mp_map_gsi_to_irq(gsi, 0);
-	if (irq > 0)
-		mp_unmap_irq(irq);
-}
-
-static struct irq_domain_ops acpi_irqdomain_ops = {
-	.map = mp_irqdomain_map,
-	.unmap = mp_irqdomain_unmap,
-};
-
 static int __init
 acpi_parse_ioapic(struct acpi_subtable_header * header, const unsigned long end)
 {
 	struct acpi_madt_io_apic *ioapic = NULL;
 	struct ioapic_domain_cfg cfg = {
 		.type = IOAPIC_DOMAIN_DYNAMIC,
-		.ops = &acpi_irqdomain_ops,
+		.ops = &mp_ioapic_irqdomain_ops,
 	};
 
 	ioapic = (struct acpi_madt_io_apic *)header;
@@ -652,7 +608,7 @@ static int acpi_register_gsi_pic(struct device *dev, u32 gsi,
 	 * Make sure all (legacy) PCI IRQs are set as level-triggered.
 	 */
 	if (trigger == ACPI_LEVEL_SENSITIVE)
-		eisa_set_level_irq(gsi);
+		elcr_set_level_irq(gsi);
 #endif
 
 	return gsi;
@@ -663,10 +619,21 @@ static int acpi_register_gsi_ioapic(struct device *dev, u32 gsi,
 				    int trigger, int polarity)
 {
 	int irq = gsi;
-
 #ifdef CONFIG_X86_IO_APIC
+	int node;
+	struct irq_alloc_info info;
+
+	node = dev ? dev_to_node(dev) : NUMA_NO_NODE;
+	trigger = trigger == ACPI_EDGE_SENSITIVE ? 0 : 1;
+	polarity = polarity == ACPI_ACTIVE_HIGH ? 0 : 1;
+	ioapic_set_alloc_attr(&info, node, trigger, polarity);
+
 	mutex_lock(&acpi_ioapic_lock);
-	irq = mp_register_gsi(dev, gsi, trigger, polarity);
+	irq = mp_map_gsi_to_irq(gsi, IOAPIC_MAP_ALLOC, &info);
+	/* Don't set up the ACPI SCI because it's already set up */
+	if (irq >= 0 && enable_update_mptable &&
+	    acpi_gbl_FADT.sci_interrupt != gsi)
+		mp_config_acpi_gsi(dev, gsi, trigger, polarity);
 	mutex_unlock(&acpi_ioapic_lock);
 #endif
 
@@ -676,8 +643,12 @@ static int acpi_register_gsi_ioapic(struct device *dev, u32 gsi,
 static void acpi_unregister_gsi_ioapic(u32 gsi)
 {
 #ifdef CONFIG_X86_IO_APIC
+	int irq;
+
 	mutex_lock(&acpi_ioapic_lock);
-	mp_unregister_gsi(gsi);
+	irq = mp_map_gsi_to_irq(gsi, 0, NULL);
+	if (irq > 0)
+		mp_unmap_irq(irq);
 	mutex_unlock(&acpi_ioapic_lock);
 #endif
 }
@@ -786,7 +757,7 @@ int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base)
 	u64 addr;
 	struct ioapic_domain_cfg cfg = {
 		.type = IOAPIC_DOMAIN_DYNAMIC,
-		.ops = &acpi_irqdomain_ops,
+		.ops = &mp_ioapic_irqdomain_ops,
 	};
 
 	ioapic_id = acpi_get_ioapic_id(handle, gsi_base, &addr);
diff --git a/arch/x86/kernel/acpi/wakeup_32.S b/arch/x86/kernel/acpi/wakeup_32.S
index 665c6b7d2ea9..0c26b1b44e51 100644
--- a/arch/x86/kernel/acpi/wakeup_32.S
+++ b/arch/x86/kernel/acpi/wakeup_32.S
@@ -12,11 +12,13 @@ ENTRY(wakeup_pmode_return)
 wakeup_pmode_return:
 	movw	$__KERNEL_DS, %ax
 	movw	%ax, %ss
-	movw	%ax, %ds
-	movw	%ax, %es
 	movw	%ax, %fs
 	movw	%ax, %gs
 
+	movw	$__USER_DS, %ax
+	movw	%ax, %ds
+	movw	%ax, %es
+
 	# reload the gdt, as we need the full 32 bit address
 	lidt	saved_idt
 	lldt	saved_ldt
diff --git a/arch/x86/kernel/acpi/wakeup_64.S b/arch/x86/kernel/acpi/wakeup_64.S
index ae693b51ed8e..8c35df468104 100644
--- a/arch/x86/kernel/acpi/wakeup_64.S
+++ b/arch/x86/kernel/acpi/wakeup_64.S
@@ -62,7 +62,7 @@ ENTRY(do_suspend_lowlevel)
 	pushfq
 	popq	pt_regs_flags(%rax)
 
-	movq	$resume_point, saved_rip(%rip)
+	movq	$.Lresume_point, saved_rip(%rip)
 
 	movq	%rsp, saved_rsp
 	movq	%rbp, saved_rbp
@@ -75,10 +75,10 @@ ENTRY(do_suspend_lowlevel)
 	xorl	%eax, %eax
 	call	x86_acpi_enter_sleep_state
 	/* in case something went wrong, restore the machine status and go on */
-	jmp