Merge branch 'linus' into x86/tracehook

68 files changed, 1217 insertions, 702 deletions

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 2206787b1157..ebfd7ff82ade 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -578,35 +578,29 @@ config SWIOTLB
 
 config IOMMU_HELPER
 	def_bool (CALGARY_IOMMU || GART_IOMMU || SWIOTLB || AMD_IOMMU)
+
 config MAXSMP
 	bool "Configure Maximum number of SMP Processors and NUMA Nodes"
-	depends on X86_64 && SMP
+	depends on X86_64 && SMP && BROKEN
 	default n
 	help
 	  Configure maximum number of CPUS and NUMA Nodes for this architecture.
 	  If unsure, say N.
 
-if MAXSMP
-config NR_CPUS
-	int
-	default "4096"
-endif
-
-if !MAXSMP
 config NR_CPUS
-	int "Maximum number of CPUs (2-4096)"
-	range 2 4096
+	int "Maximum number of CPUs (2-512)" if !MAXSMP
+	range 2 512
 	depends on SMP
+	default "4096" if MAXSMP
 	default "32" if X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000
 	default "8"
 	help
 	  This allows you to specify the maximum number of CPUs which this
-	  kernel will support.  The maximum supported value is 4096 and the
+	  kernel will support.  The maximum supported value is 512 and the
 	  minimum value which makes sense is 2.
 
 	  This is purely to save memory - each supported CPU adds
 	  approximately eight kilobytes to the kernel image.
-endif
 
 config SCHED_SMT
 	bool "SMT (Hyperthreading) scheduler support"
@@ -952,9 +946,9 @@ config NUMA
 	  local memory controller of the CPU and add some more
 	  NUMA awareness to the kernel.
 
-	  For i386 this is currently highly experimental and should be only
+	  For 32-bit this is currently highly experimental and should be only
 	  used for kernel development. It might also cause boot failures.
-	  For x86_64 this is recommended on all multiprocessor Opteron systems.
+	  For 64-bit this is recommended on all multiprocessor Opteron systems.
 	  If the system is EM64T, you should say N unless your system is
 	  EM64T NUMA.
 
@@ -997,17 +991,10 @@ config NUMA_EMU
 	  into virtual nodes when booted with "numa=fake=N", where N is the
 	  number of nodes. This is only useful for debugging.
 
-if MAXSMP
-
 config NODES_SHIFT
-	int
-	default "9"
-endif
-
-if !MAXSMP
-config NODES_SHIFT
-	int "Maximum NUMA Nodes (as a power of 2)"
+	int "Maximum NUMA Nodes (as a power of 2)" if !MAXSMP
 	range 1 9   if X86_64
+	default "9" if MAXSMP
 	default "6" if X86_64
 	default "4" if X86_NUMAQ
 	default "3"
@@ -1015,7 +1002,6 @@ config NODES_SHIFT
 	help
 	  Specify the maximum number of NUMA Nodes available on the target
 	  system.  Increases memory reserved to accomodate various tables.
-endif
 
 config HAVE_ARCH_BOOTMEM_NODE
 	def_bool y
@@ -1264,7 +1250,7 @@ config KEXEC
 	  strongly in flux, so no good recommendation can be made.
 
 config CRASH_DUMP
-	bool "kernel crash dumps (EXPERIMENTAL)"
+	bool "kernel crash dumps"
 	depends on X86_64 || (X86_32 && HIGHMEM)
 	help
 	  Generate crash dump after being started by kexec.
diff --git a/arch/x86/boot/boot.h b/arch/x86/boot/boot.h
index a34b9982c7cb..cc0ef13fba7a 100644
--- a/arch/x86/boot/boot.h
+++ b/arch/x86/boot/boot.h
@@ -24,10 +24,14 @@
 #include <linux/edd.h>
 #include <asm/boot.h>
 #include <asm/setup.h>
+#include "bitops.h"
+#include <asm/cpufeature.h>
 
 /* Useful macros */
 #define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
 
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof(*(x)))
+
 extern struct setup_header hdr;
 extern struct boot_params boot_params;
 
@@ -242,6 +246,12 @@ int cmdline_find_option(const char *option, char *buffer, int bufsize);
 int cmdline_find_option_bool(const char *option);
 
 /* cpu.c, cpucheck.c */
+struct cpu_features {
+	int level;		/* Family, or 64 for x86-64 */
+	int model;
+	u32 flags[NCAPINTS];
+};
+extern struct cpu_features cpu;
 int check_cpu(int *cpu_level_ptr, int *req_level_ptr, u32 **err_flags_ptr);
 int validate_cpu(void);
 
diff --git a/arch/x86/boot/cpu.c b/arch/x86/boot/cpu.c
index 92d6fd73dc7d..75298fe2edca 100644
--- a/arch/x86/boot/cpu.c
+++ b/arch/x86/boot/cpu.c
@@ -16,9 +16,6 @@
  */
 
 #include "boot.h"
-#include "bitops.h"
-#include <asm/cpufeature.h>
-
 #include "cpustr.h"
 
 static char *cpu_name(int level)
diff --git a/arch/x86/boot/cpucheck.c b/arch/x86/boot/cpucheck.c
index 7804389ee005..4b9ae7c56748 100644
--- a/arch/x86/boot/cpucheck.c
+++ b/arch/x86/boot/cpucheck.c
@@ -22,21 +22,13 @@
 
 #ifdef _SETUP
 # include "boot.h"
-# include "bitops.h"
 #endif
 #include <linux/types.h>
-#include <asm/cpufeature.h>
 #include <asm/processor-flags.h>
 #include <asm/required-features.h>
 #include <asm/msr-index.h>
 
-struct cpu_features {
-	int level;		/* Family, or 64 for x86-64 */
-	int model;
-	u32 flags[NCAPINTS];
-};
-
-static struct cpu_features cpu;
+struct cpu_features cpu;
 static u32 cpu_vendor[3];
 static u32 err_flags[NCAPINTS];
 
diff --git a/arch/x86/boot/main.c b/arch/x86/boot/main.c
index 2296164b54d2..197421db1af1 100644
--- a/arch/x86/boot/main.c
+++ b/arch/x86/boot/main.c
@@ -73,6 +73,11 @@ static void keyboard_set_repeat(void)
  */
 static void query_ist(void)
 {
+	/* Some older BIOSes apparently crash on this call, so filter
+	   it from machines too old to have SpeedStep at all. */
+	if (cpu.level < 6)
+		return;
+
 	asm("int $0x15"
 	    : "=a" (boot_params.ist_info.signature),
 	      "=b" (boot_params.ist_info.command),
diff --git a/arch/x86/boot/memory.c b/arch/x86/boot/memory.c
index 53165c97336b..8c3c25f35578 100644
--- a/arch/x86/boot/memory.c
+++ b/arch/x86/boot/memory.c
@@ -13,7 +13,6 @@
  */
 
 #include "boot.h"
-#include <linux/kernel.h>
 
 #define SMAP	0x534d4150	/* ASCII "SMAP" */
 
diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index 4d73f53287b6..104275e191a8 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -1,13 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
-# Sun May  4 19:59:02 2008
+# Linux kernel version: 2.6.27-rc4
+# Mon Aug 25 15:04:00 2008
 #
 # CONFIG_64BIT is not set
 CONFIG_X86_32=y
 # CONFIG_X86_64 is not set
 CONFIG_X86=y
-CONFIG_DEFCONFIG_LIST="arch/x86/configs/i386_defconfig"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
 # CONFIG_GENERIC_LOCKBREAK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CMOS_UPDATE=y
@@ -53,6 +53,7 @@ CONFIG_X86_HT=y
 CONFIG_X86_BIOS_REBOOT=y
 CONFIG_X86_TRAMPOLINE=y
 CONFIG_KTIME_SCALAR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # General setup
@@ -82,6 +83,7 @@ CONFIG_CGROUPS=y
 CONFIG_CGROUP_NS=y
 # CONFIG_CGROUP_DEVICE is not set
 CONFIG_CPUSETS=y
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
@@ -105,7 +107,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -113,6 +114,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -132,27 +134,35 @@ CONFIG_MARKERS=y
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_KRETPROBES=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 CONFIG_BLK_DEV_IO_TRACE=y
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -176,19 +186,17 @@ CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SMP=y
+CONFIG_X86_FIND_SMP_CONFIG=y
+CONFIG_X86_MPPARSE=y
 CONFIG_X86_PC=y
 # CONFIG_X86_ELAN is not set
 # CONFIG_X86_VOYAGER is not set
-# CONFIG_X86_NUMAQ is not set
-# CONFIG_X86_SUMMIT is not set
-# CONFIG_X86_BIGSMP is not set
-# CONFIG_X86_VISWS is not set
 # CONFIG_X86_GENERICARCH is not set
-# CONFIG_X86_ES7000 is not set
-# CONFIG_X86_RDC321X is not set
 # CONFIG_X86_VSMP is not set
+# CONFIG_X86_RDC321X is not set
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 # CONFIG_PARAVIRT_GUEST is not set
+# CONFIG_MEMTEST is not set
 # CONFIG_M386 is not set
 # CONFIG_M486 is not set
 # CONFIG_M586 is not set
@@ -215,21 +223,19 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 # CONFIG_MPSC is not set
 CONFIG_MCORE2=y
 # CONFIG_GENERIC_CPU is not set
-# CONFIG_X86_GENERIC is not set
+CONFIG_X86_GENERIC=y
 CONFIG_X86_CPU=y
 CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_L1_CACHE_SHIFT=7
 CONFIG_X86_XADD=y
 CONFIG_X86_WP_WORKS_OK=y
 CONFIG_X86_INVLPG=y
 CONFIG_X86_BSWAP=y
 CONFIG_X86_POPAD_OK=y
-CONFIG_X86_GOOD_APIC=y
 CONFIG_X86_INTEL_USERCOPY=y
 CONFIG_X86_USE_PPRO_CHECKSUM=y
-CONFIG_X86_P6_NOP=y
 CONFIG_X86_TSC=y
-CONFIG_X86_MINIMUM_CPU_FAMILY=6
+CONFIG_X86_MINIMUM_CPU_FAMILY=4
 CONFIG_X86_DEBUGCTLMSR=y
 CONFIG_HPET_TIMER=y
 CONFIG_HPET_EMULATE_RTC=y
@@ -247,7 +253,7 @@ CONFIG_X86_IO_APIC=y
 CONFIG_VM86=y
 # CONFIG_TOSHIBA is not set
 # CONFIG_I8K is not set
-# CONFIG_X86_REBOOTFIXUPS is not set
+CONFIG_X86_REBOOTFIXUPS=y
 # CONFIG_MICROCODE is not set
 CONFIG_X86_MSR=y
 CONFIG_X86_CPUID=y
@@ -256,32 +262,28 @@ CONFIG_HIGHMEM4G=y
 # CONFIG_HIGHMEM64G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_HIGHMEM=y
-CONFIG_NEED_NODE_MEMMAP_SIZE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-
-#
-# Memory hotplug is currently incompatible with Software Suspend
-#
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-# CONFIG_HIGHPTE is not set
+CONFIG_HIGHPTE=y
 # CONFIG_MATH_EMULATION is not set
 CONFIG_MTRR=y
-# CONFIG_X86_PAT is not set
+# CONFIG_MTRR_SANITIZER is not set
+CONFIG_X86_PAT=y
 CONFIG_EFI=y
 # CONFIG_IRQBALANCE is not set
 CONFIG_SECCOMP=y
@@ -293,6 +295,7 @@ CONFIG_HZ=1000
 CONFIG_SCHED_HRTICK=y
 CONFIG_KEXEC=y
 CONFIG_CRASH_DUMP=y
+# CONFIG_KEXEC_JUMP is not set
 CONFIG_PHYSICAL_START=0x1000000
 CONFIG_RELOCATABLE=y
 CONFIG_PHYSICAL_ALIGN=0x200000
@@ -312,6 +315,7 @@ CONFIG_PM_TRACE_RTC=y
 CONFIG_PM_SLEEP_SMP=y
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
 CONFIG_SUSPEND_FREEZER=y
 CONFIG_HIBERNATION=y
 CONFIG_PM_STD_PARTITION=""
@@ -337,6 +341,7 @@ CONFIG_ACPI_THERMAL=y
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
 CONFIG_ACPI_EC=y
+# CONFIG_ACPI_PCI_SLOT is not set
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 CONFIG_X86_PM_TIMER=y
@@ -395,8 +400,8 @@ CONFIG_PCI=y
 # CONFIG_PCI_GOBIOS is not set
 # CONFIG_PCI_GOMMCONFIG is not set
 # CONFIG_PCI_GODIRECT is not set
-CONFIG_PCI_GOANY=y
 # CONFIG_PCI_GOOLPC is not set
+CONFIG_PCI_GOANY=y
 CONFIG_PCI_BIOS=y
 CONFIG_PCI_DIRECT=y
 CONFIG_PCI_MMCONFIG=y
@@ -448,10 +453,6 @@ CONFIG_HOTPLUG_PCI=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -475,7 +476,10 @@ CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
@@ -618,7 +622,6 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_HTB is not set
 # CONFIG_NET_SCH_HFSC is not set
 # CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_RR is not set
 # CONFIG_NET_SCH_RED is not set
 # CONFIG_NET_SCH_SFQ is not set
 # CONFIG_NET_SCH_TEQL is not set
@@ -680,28 +683,19 @@ CONFIG_FIB_RULES=y
 CONFIG_CFG80211=y
 CONFIG_NL80211=y
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_MAC80211=y
 
 #
 # Rate control algorithm selection
 #
+CONFIG_MAC80211_RC_PID=y
 CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
-
-#
-# Selecting 'y' for an algorithm will
-#
-
-#
-# build the algorithm into mac80211.
-#
 CONFIG_MAC80211_RC_DEFAULT="pid"
-CONFIG_MAC80211_RC_PID=y
 # CONFIG_MAC80211_MESH is not set
 CONFIG_MAC80211_LEDS=y
 # CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
-# CONFIG_MAC80211_DEBUG is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -717,6 +711,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 CONFIG_DEBUG_DEVRES=y
 # CONFIG_SYS_HYPERVISOR is not set
@@ -749,6 +745,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_IBM_ASM is not set
 # CONFIG_PHANTOM is not set
@@ -760,10 +757,12 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_FUJITSU_LAPTOP is not set
 # CONFIG_TC1100_WMI is not set
 # CONFIG_MSI_LAPTOP is not set
+# CONFIG_COMPAL_LAPTOP is not set
 # CONFIG_SONY_LAPTOP is not set
 # CONFIG_THINKPAD_ACPI is not set
 # CONFIG_INTEL_MENLOW is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -802,12 +801,13 @@ CONFIG_SCSI_WAIT_SCAN=m
 #
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=y
 # CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_ATA_ACPI=y
@@ -842,7 +842,7 @@ CONFIG_PATA_AMD=y
 # CONFIG_PATA_CS5536 is not set
 # CONFIG_PATA_CYPRESS is not set
 # CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
+CONFIG_ATA_GENERIC=y
 # CONFIG_PATA_HPT366 is not set
 # CONFIG_PATA_HPT37X is not set
 # CONFIG_PATA_HPT3X2N is not set
@@ -852,7 +852,7 @@ CONFIG_PATA_AMD=y
 # CONFIG_PATA_JMICRON is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
+CONFIG_PATA_MPIIX=y
 CONFIG_PATA_OLDPIIX=y
 # CONFIG_PATA_NETCELL is not set
 # CONFIG_PATA_NINJA32 is not set
@@ -871,6 +871,7 @@ CONFIG_PATA_OLDPIIX=y
 # CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
+CONFIG_PATA_SCH=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 # CONFIG_MD_LINEAR is not set
@@ -894,13 +895,16 @@ CONFIG_DM_ZERO=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_MACINTOSH_DRIVERS=y
 CONFIG_MAC_EMUMOUSEBTN=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_IFB is not set</