Merge tag 'mips_5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Thomas Bogendoerfer:
 "Cleanups and fixes"

* tag 'mips_5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (38 commits)
  MIPS: RALINK: Define pci_remap_iospace under CONFIG_PCI_DRIVERS_GENERIC
  MIPS: Use memblock_add_node() in early_parse_mem() under CONFIG_NUMA
  MIPS: Return -EINVAL if mem parameter is empty in early_parse_mem()
  MIPS: Kconfig: Fix indentation and add endif comment
  MIPS: bmips: Fix compiler warning observed on W=1 build
  MIPS: Rewrite `csum_tcpudp_nofold' in plain C
  mips: setup: use strscpy to replace strlcpy
  MIPS: Octeon: add SNIC10E board
  MIPS: Ingenic: Refresh defconfig for CU1000-Neo and CU1830-Neo.
  MIPS: Ingenic: Refresh device tree for Ingenic SoCs and boards.
  MIPS: Ingenic: Add PWM nodes for X1830.
  MIPS: Octeon: fix typo in comment
  MIPS: loongson32: Kconfig: Remove extra space
  MIPS: Sibyte: remove unnecessary return variable
  MIPS: Use NOKPROBE_SYMBOL() instead of __kprobes annotation
  selftests/ftrace: Save kprobe_events to test log
  MIPS: tools: no need to initialise statics to 0
  MIPS: Loongson: Use hwmon_device_register_with_groups() to register hwmon
  MIPS: VR41xx: Drop redundant spinlock initialization
  MIPS: smp: optimization for flush_tlb_mm when exiting
  ...

60 files changed, 358 insertions, 249 deletions

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index de3b32a507d2..6e92ca97e479 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1321,11 +1321,11 @@ config CPU_LOONGSON64
 	select SWIOTLB
 	select HAVE_KVM
 	help
-		The Loongson GSx64(GS264/GS464/GS464E/GS464V) series of processor
-		cores implements the MIPS64R2 instruction set with many extensions,
-		including most 64-bit Loongson-2 (2H, 2K) and Loongson-3 (3A1000,
-		3B1000, 3B1500, 3A2000, 3A3000 and 3A4000) processors. However, old
-		Loongson-2E/2F is not covered here and will be removed in future.
+	  The Loongson GSx64(GS264/GS464/GS464E/GS464V) series of processor
+	  cores implements the MIPS64R2 instruction set with many extensions,
+	  including most 64-bit Loongson-2 (2H, 2K) and Loongson-3 (3A1000,
+	  3B1000, 3B1500, 3A2000, 3A3000 and 3A4000) processors. However, old
+	  Loongson-2E/2F is not covered here and will be removed in future.
 
 config LOONGSON3_ENHANCEMENT
 	bool "New Loongson-3 CPU Enhancements"
@@ -3255,7 +3255,7 @@ menu "CPU Power Management"
 
 if CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER
 source "drivers/cpufreq/Kconfig"
-endif
+endif # CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER
 
 source "drivers/cpuidle/Kconfig"
 
diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c
index 4ca2c28878e0..5ab043000409 100644
--- a/arch/mips/alchemy/common/dbdma.c
+++ b/arch/mips/alchemy/common/dbdma.c
@@ -574,7 +574,7 @@ u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
 		dp++;
 	}
 
-	/* Make last descrptor point to the first. */
+	/* Make last descriptor point to the first. */
 	dp--;
 	dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(ctp->chan_desc_base));
 	ctp->get_ptr = ctp->put_ptr = ctp->cur_ptr = ctp->chan_desc_base;
diff --git a/arch/mips/bmips/dma.c b/arch/mips/bmips/dma.c
index c535f9cb75ec..33788668cbdb 100644
--- a/arch/mips/bmips/dma.c
+++ b/arch/mips/bmips/dma.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0+
 
 #include <linux/types.h>
+#include <linux/dma-map-ops.h>
 #include <asm/bmips.h>
 #include <asm/io.h>
 
diff --git a/arch/mips/boot/dts/brcm/bcm97358svmb.dts b/arch/mips/boot/dts/brcm/bcm97358svmb.dts
index 522f2c40d6e6..c17fc14d4899 100644
--- a/arch/mips/boot/dts/brcm/bcm97358svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97358svmb.dts
@@ -78,7 +78,7 @@
 &qspi {
 	status = "okay";
 
-	m25p80@0 {
+	flash@0 {
 		compatible = "m25p80";
 		reg = <0>;
 		spi-max-frequency = <40000000>;
diff --git a/arch/mips/boot/dts/brcm/bcm97360svmb.dts b/arch/mips/boot/dts/brcm/bcm97360svmb.dts
index 01f215b08dba..c9b76f41e7a6 100644
--- a/arch/mips/boot/dts/brcm/bcm97360svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97360svmb.dts
@@ -81,7 +81,7 @@
 &qspi {
 	status = "okay";
 
-	m25p80@0 {
+	flash@0 {
 		compatible = "m25p80";
 		reg = <0>;
 		spi-max-frequency = <40000000>;
diff --git a/arch/mips/boot/dts/brcm/bcm97425svmb.dts b/arch/mips/boot/dts/brcm/bcm97425svmb.dts
index f38934934349..289a57b912ef 100644
--- a/arch/mips/boot/dts/brcm/bcm97425svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97425svmb.dts
@@ -116,7 +116,7 @@
 &qspi {
 	status = "okay";
 
-	m25p80@0 {
+	flash@0 {
 		compatible = "m25p80";
 		reg = <0>;
 		spi-max-frequency = <40000000>;
diff --git a/arch/mips/boot/dts/ingenic/cu1000-neo.dts b/arch/mips/boot/dts/ingenic/cu1000-neo.dts
index f98cf029efc3..c89abf94e74f 100644
--- a/arch/mips/boot/dts/ingenic/cu1000-neo.dts
+++ b/arch/mips/boot/dts/ingenic/cu1000-neo.dts
@@ -31,42 +31,6 @@
 		};
 	};
 
-	ssi: spi-gpio {
-		compatible = "spi-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		num-chipselects = <1>;
-
-		mosi-gpios = <&gpd 2 GPIO_ACTIVE_HIGH>;
-		miso-gpios = <&gpd 3 GPIO_ACTIVE_HIGH>;
-		sck-gpios = <&gpd 0 GPIO_ACTIVE_HIGH>;
-		cs-gpios = <&gpd 1 GPIO_ACTIVE_HIGH>;
-
-		status = "okay";
-
-		spi-max-frequency = <50000000>;
-
-		sc16is752: expander@0 {
-			compatible = "nxp,sc16is752";
-			reg = <0>; /* CE0 */
-			spi-max-frequency = <4000000>;
-
-			clocks = <&exclk_sc16is752>;
-
-			interrupt-parent = <&gpc>;
-			interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			exclk_sc16is752: sc16is752 {
-				compatible = "fixed-clock";
-				#clock-cells = <0>;
-				clock-frequency = <48000000>;
-			};
-		};
-	};
-
 	wlan_pwrseq: msc1-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 
@@ -90,7 +54,7 @@
 
 &ost {
 	/* 1500 kHz for the system timer and clocksource */
-	assigned-clocks = <&ost OST_CLK_PERCPU_TIMER>, <&ost OST_CLK_GLOBAL_TIMER>;
+	assigned-clocks = <&ost OST_CLK_EVENT_TIMER>, <&ost OST_CLK_GLOBAL_TIMER>;
 	assigned-clock-rates = <1500000>, <1500000>;
 };
 
@@ -101,6 +65,39 @@
 	pinctrl-0 = <&pins_uart2>;
 };
 
+&ssi {
+	status = "okay";
+
+	num-cs = <2>;
+	cs-gpios = <0>, <&gpc 20 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_ssi>;
+
+	sc16is752: expander@0 {
+		compatible = "nxp,sc16is752";
+		reg = <0>; /* CE0 */
+
+		spi-rx-bus-width = <1>;
+		spi-tx-bus-width = <1>;
+		spi-max-frequency = <4000000>;
+
+		clocks = <&exclk_sc16is752>;
+
+		interrupt-parent = <&gpc>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		exclk_sc16is752: sc16is752 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <48000000>;
+		};
+	};
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -192,6 +189,12 @@
 		bias-pull-up;
 	};
 
+	pins_ssi: ssi {
+		function = "ssi";
+		groups = "ssi-dt-d", "ssi-dr-d", "ssi-clk-d", "ssi-ce0-d";
+		bias-disable;
+	};
+
 	pins_i2c0: i2c0 {
 		function = "i2c0";
 		groups = "i2c0-data";
diff --git a/arch/mips/boot/dts/ingenic/cu1830-neo.dts b/arch/mips/boot/dts/ingenic/cu1830-neo.dts
index cfcb40edb7d9..3c7784983332 100644
--- a/arch/mips/boot/dts/ingenic/cu1830-neo.dts
+++ b/arch/mips/boot/dts/ingenic/cu1830-neo.dts
@@ -31,42 +31,6 @@
 		};
 	};
 
-	ssi0: spi-gpio {
-		compatible = "spi-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		num-chipselects = <1>;
-
-		mosi-gpios = <&gpc 12 GPIO_ACTIVE_HIGH>;
-		miso-gpios = <&gpc 11 GPIO_ACTIVE_HIGH>;
-		sck-gpios = <&gpc 15 GPIO_ACTIVE_HIGH>;
-		cs-gpios = <&gpc 16 GPIO_ACTIVE_HIGH>;
-
-		status = "okay";
-
-		spi-max-frequency = <50000000>;
-
-		sc16is752: expander@0 {
-			compatible = "nxp,sc16is752";
-			reg = <0>; /* CE0 */
-			spi-max-frequency = <4000000>;
-
-			clocks = <&exclk_sc16is752>;
-
-			interrupt-parent = <&gpb>;
-			interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			exclk_sc16is752: sc16is752 {
-				compatible = "fixed-clock";
-				#clock-cells = <0>;
-				clock-frequency = <48000000>;
-			};
-		};
-	};
-
 	wlan_pwrseq: msc1-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 
@@ -90,7 +54,7 @@
 
 &ost {
 	/* 1500 kHz for the system timer and clocksource */
-	assigned-clocks = <&ost OST_CLK_PERCPU_TIMER>, <&ost OST_CLK_GLOBAL_TIMER>;
+	assigned-clocks = <&ost OST_CLK_EVENT_TIMER>, <&ost OST_CLK_GLOBAL_TIMER>;
 	assigned-clock-rates = <1500000>, <1500000>;
 };
 
@@ -101,6 +65,38 @@
 	pinctrl-0 = <&pins_uart1>;
 };
 
+&ssi0 {
+	status = "okay";
+
+	num-cs = <2>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_ssi0>;
+
+	sc16is752: expander@0 {
+		compatible = "nxp,sc16is752";
+		reg = <0>; /* CE0 */
+
+		spi-rx-bus-width = <1>;
+		spi-tx-bus-width = <1>;
+		spi-max-frequency = <4000000>;
+
+		clocks = <&exclk_sc16is752>;
+
+		interrupt-parent = <&gpb>;
+		interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		exclk_sc16is752: sc16is752 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <48000000>;
+		};
+	};
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -196,6 +192,12 @@
 		bias-pull-up;
 	};
 
+	pins_ssi0: ssi0 {
+		function = "ssi0";
+		groups = "ssi0-dt", "ssi0-dr", "ssi0-clk", "ssi0-ce0", "ssi0-ce1";
+		bias-disable;
+	};
+
 	pins_i2c0: i2c0 {
 		function = "i2c0";
 		groups = "i2c0-data";
diff --git a/arch/mips/boot/dts/ingenic/x1000.dtsi b/arch/mips/boot/dts/ingenic/x1000.dtsi
index 8bd27edef216..ecbfed49dc77 100644
--- a/arch/mips/boot/dts/ingenic/x1000.dtsi
+++ b/arch/mips/boot/dts/ingenic/x1000.dtsi
@@ -127,6 +127,18 @@
 			clocks = <&tcu TCU_CLK_WDT>;
 			clock-names = "wdt";
 		};
+
+		pwm: pwm@40 {
+			compatible = "ingenic,x1000-pwm";
+			reg = <0x40 0x50>;
+
+			#pwm-cells = <3>;
+
+			clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
+				 <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
+				 <&tcu TCU_CLK_TIMER4>;
+			clock-names = "timer0", "timer1", "timer2", "timer3", "timer4";
+		};
 	};
 
 	rtc: rtc@10003000 {
@@ -246,6 +258,25 @@
 		status = "disabled";
 	};
 
+	ssi: spi@10043000 {
+		compatible = "ingenic,x1000-spi";
+		reg = <0x10043000 0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <8>;
+
+		clocks = <&cgu X1000_CLK_SSI>;
+		clock-names = "spi";
+
+		dmas = <&pdma X1000_DMA_SSI0_RX 0xffffffff>,
+			   <&pdma X1000_DMA_SSI0_TX 0xffffffff>;
+		dma-names = "rx", "tx";
+
+		status = "disabled";
+	};
+
 	i2c0: i2c-controller@10050000 {
 		compatible = "ingenic,x1000-i2c";
 		reg = <0x10050000 0x1000>;
@@ -291,6 +322,7 @@
 	pdma: dma-controller@13420000 {
 		compatible = "ingenic,x1000-dma";
 		reg = <0x13420000 0x400>, <0x13421000 0x40>;
+
 		#dma-cells = <2>;
 
 		interrupt-parent = <&intc>;
diff --git a/arch/mips/boot/dts/ingenic/x1830.dtsi b/arch/mips/boot/dts/ingenic/x1830.dtsi
index 2595df8671c7..efd556902cfd 100644
--- a/arch/mips/boot/dts/ingenic/x1830.dtsi
+++ b/arch/mips/boot/dts/ingenic/x1830.dtsi
@@ -120,6 +120,20 @@
 			clocks = <&tcu TCU_CLK_WDT>;
 			clock-names = "wdt";
 		};
+
+		pwm: pwm@40 {
+			compatible = "ingenic,x1830-pwm", "ingenic,jz4740-pwm";
+			reg = <0x40 0x80>;
+
+			#pwm-cells = <3>;
+
+			clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
+				 <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
+				 <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>,
+				 <&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>;
+			clock-names = "timer0", "timer1", "timer2", "timer3",
+				      "timer4", "timer5", "timer6", "timer7";
+		};
 	};
 
 	rtc: rtc@10003000 {
@@ -226,6 +240,44 @@
 		status = "disabled";
 	};
 
+	ssi0: spi@10043000 {
+		compatible = "ingenic,x1830-spi", "ingenic,x1000-spi";
+		reg = <0x10043000 0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <9>;
+
+		clocks = <&cgu X1830_CLK_SSI0>;
+		clock-names = "spi";
+
+		dmas = <&pdma X1830_DMA_SSI0_RX 0xffffffff>,
+			   <&pdma X1830_DMA_SSI0_TX 0xffffffff>;
+		dma-names = "rx", "tx";
+
+		status = "disabled";
+	};
+
+	ssi1: spi@10044000 {
+		compatible = "ingenic,x1830-spi", "ingenic,x1000-spi";
+		reg = <0x10044000 0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <8>;
+
+		clocks = <&cgu X1830_CLK_SSI1>;
+		clock-names = "spi";
+
+		dmas = <&pdma X1830_DMA_SSI1_RX 0xffffffff>,
+			   <&pdma X1830_DMA_SSI1_TX 0xffffffff>;
+		dma-names = "rx", "tx";
+
+		status = "disabled";
+	};
+
 	i2c0: i2c-controller@10050000 {
 		compatible = "ingenic,x1830-i2c", "ingenic,x1000-i2c";
 		reg = <0x10050000 0x1000>;
@@ -280,6 +332,7 @@
 	pdma: dma-controller@13420000 {
 		compatible = "ingenic,x1830-dma";
 		reg = <0x13420000 0x400>, <0x13421000 0x40>;
+
 		#dma-cells = <2>;
 
 		interrupt-parent = <&intc>;
diff --git a/arch/mips/boot/dts/mscc/jaguar2_pcb110.dts b/arch/mips/boot/dts/mscc/jaguar2_pcb110.dts
index d80cd6842b2a..0ea7bc5b5746 100644
--- a/arch/mips/boot/dts/mscc/jaguar2_pcb110.dts
+++ b/arch/mips/boot/dts/mscc/jaguar2_pcb110.dts
@@ -180,27 +180,27 @@
 		pins = "GPIO_49";
 		function = "si";
 	};
-	i2cmux_pins_i: i2cmux-pins-i {
+	i2cmux_pins_i: i2cmux-pins {
 		pins = "GPIO_17", "GPIO_18", "GPIO_20", "GPIO_21";
 		function = "twi_scl_m";
 		output-low;
 	};
-	i2cmux_0: i2cmux-0 {
+	i2cmux_0: i2cmux-0-pins {
 		pins = "GPIO_17";
 		function = "twi_scl_m";
 		output-high;
 	};
-	i2cmux_1: i2cmux-1 {
+	i2cmux_1: i2cmux-1-pins {
 		pins = "GPIO_18";
 		function = "twi_scl_m";
 		output-high;
 	};
-	i2cmux_2: i2cmux-2 {
+	i2cmux_2: i2cmux-2-pins {
 		pins = "GPIO_20";
 		function = "twi_scl_m";
 		output-high;
 	};
-	i2cmux_3: i2cmux-3 {
+	i2cmux_3: i2cmux-3-pins {
 		pins = "GPIO_21";
 		function = "twi_scl_m";
 		output-high;
diff --git a/arch/mips/boot/dts/mscc/jaguar2_pcb111.dts b/arch/mips/boot/dts/mscc/jaguar2_pcb111.dts
index 813c5e16013c..05d8c6a96dc4 100644
--- a/arch/mips/boot/dts/mscc/jaguar2_pcb111.dts
+++ b/arch/mips/boot/dts/mscc/jaguar2_pcb111.dts
@@ -79,27 +79,27 @@
 };
 
 &gpio {
-	i2cmux_pins_i: i2cmux-pins-i {
+	i2cmux_pins_i: i2cmux-pins {
 		pins = "GPIO_17", "GPIO_18";
 		function = "twi_scl_m";
 		output-low;
 	};
-	i2cmux_0: i2cmux-0 {
+	i2cmux_0: i2cmux-0-pins {
 		pins = "GPIO_17";
 		function = "twi_scl_m";
 		output-high;
 	};
-	i2cmux_1: i2cmux-1 {
+	i2cmux_1: i2cmux-1-pins {
 		pins = "GPIO_18";
 		function = "twi_scl_m";
 		output-high;
 	};
-	i2cmux_2: i2cmux-2 {
+	i2cmux_2: i2cmux-2-pins {
 		pins = "GPIO_20";
 		function = "twi_scl_m";
 		output-high;
 	};
-	i2cmux_3: i2cmux-3 {
+	i2cmux_3: i2cmux-3-pins {
 		pins = "GPIO_21";
 		function = "twi_scl_m";
 		output-high;
diff --git a/arch/mips/boot/dts/mscc/jaguar2_pcb118.dts b/arch/mips/boot/dts/mscc/jaguar2_pcb118.dts
index 27c644f2d17f..cf2cf591a211 100644
--- a/arch/mips/boot/dts/mscc/jaguar2_pcb118.dts
+++ b/arch/mips/boot/dts/mscc/jaguar2_pcb118.dts
@@ -39,17 +39,17 @@
 };
 
 &gpio {
-	i2cmux_pins_i: i2cmux-pins-i {
+	i2cmux_pins_i: i2cmux-pins {
 		pins = "GPIO_17", "GPIO_16";
 		function = "twi_scl_m";
 		output-low;
 	};
-	i2cmux_0: i2cmux-0 {
+	i2cmux_0: i2cmux-0-pins {
 		pins = "GPIO_17";
 		function = "twi_scl_m";
 		output-high;
 	};
-	i2cmux_1: i2cmux-1 {
+	i2cmux_