Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

 - a new driver for the Azoteq IQS269A capacitive touch controller

 - a new driver for the Cypress CY8CTMA140 touchscreen

 - updates to Elan and ft5x06 touchscreen drivers

 - assorted driver fixes

 - msm-vibrator has been removed as we have a more generic solution

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (28 commits)
  Input: adi - work around module name confict
  Input: iqs269a - add missing I2C dependency
  Input: elants - refactor elants_i2c_execute_command()
  Input: elants - override touchscreen info with DT properties
  Input: elants - remove unused axes
  Input: add support for Azoteq IQS269A
  dt-bindings: input: Add bindings for Azoteq IQS269A
  Input: imx_sc_key - use devm_add_action_or_reset() to handle all cleanups
  Input: remove msm-vibrator driver
  dt-bindings: Input: remove msm-vibrator
  Input: elants_i2c - provide an attribute to show calibration count
  Input: introduce input_mt_report_slot_inactive()
  dt-bindings: input: touchscreen: elants_i2c: convert to YAML
  Input: add driver for the Cypress CY8CTMA140 touchscreen
  dt-bindings: touchscreen: Add CY8CTMA140 bindings
  Input: edt-ft5x06 - prefer asynchronous probe
  Input: edt-ft5x06 - improve power management operations
  Input: edt-ft5x06 - move parameter restore into helper
  Input: edt-ft5x06 - fix get_default register write access
  Input: atkbd - receive and use physcode->keycode mapping from FW
  ...

12 files changed, 690 insertions, 162 deletions

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index c071f7c407b6..35c867b2d9a7 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -201,6 +201,18 @@ config TOUCHSCREEN_CHIPONE_ICN8505
 	  To compile this driver as a module, choose M here: the
 	  module will be called chipone_icn8505.
 
+config TOUCHSCREEN_CY8CTMA140
+	tristate "cy8ctma140 touchscreen"
+	depends on I2C
+	help
+	  Say Y here if you have a Cypress CY8CTMA140 capacitive
+	  touchscreen also just known as "TMA140"
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cy8ctma140.
+
 config TOUCHSCREEN_CY8CTMG110
 	tristate "cy8ctmg110 touchscreen"
 	depends on I2C
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 94c6162409b3..30d1e1b42492 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_TOUCHSCREEN_BU21013)	+= bu21013_ts.o
 obj-$(CONFIG_TOUCHSCREEN_BU21029)	+= bu21029_ts.o
 obj-$(CONFIG_TOUCHSCREEN_CHIPONE_ICN8318)	+= chipone_icn8318.o
 obj-$(CONFIG_TOUCHSCREEN_CHIPONE_ICN8505)	+= chipone_icn8505.o
+obj-$(CONFIG_TOUCHSCREEN_CY8CTMA140)	+= cy8ctma140.o
 obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110)	+= cy8ctmg110_ts.o
 obj-$(CONFIG_TOUCHSCREEN_CYTTSP_CORE)	+= cyttsp_core.o
 obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C)	+= cyttsp_i2c.o cyttsp_i2c_common.o
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index ae60442efda0..a2189739e30f 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -822,8 +822,7 @@ static void mxt_proc_t9_message(struct mxt_data *data, u8 *message)
 		 * have happened.
 		 */
 		if (status & MXT_T9_RELEASE) {
-			input_mt_report_slot_state(input_dev,
-						   MT_TOOL_FINGER, 0);
+			input_mt_report_slot_inactive(input_dev);
 			mxt_input_sync(data);
 		}
 
@@ -839,7 +838,7 @@ static void mxt_proc_t9_message(struct mxt_data *data, u8 *message)
 		input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, area);
 	} else {
 		/* Touch no longer active, close out slot */
-		input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, 0);
+		input_mt_report_slot_inactive(input_dev);
 	}
 
 	data->update_input = true;
@@ -947,7 +946,7 @@ static void mxt_proc_t100_message(struct mxt_data *data, u8 *message)
 		dev_dbg(dev, "[%u] release\n", id);
 
 		/* close out slot */
-		input_mt_report_slot_state(input_dev, 0, 0);
+		input_mt_report_slot_inactive(input_dev);
 	}
 
 	data->update_input = true;
diff --git a/drivers/input/touchscreen/cy8ctma140.c b/drivers/input/touchscreen/cy8ctma140.c
new file mode 100644
index 000000000000..a9be29139cbf
--- /dev/null
+++ b/drivers/input/touchscreen/cy8ctma140.c
@@ -0,0 +1,353 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for Cypress CY8CTMA140 (TMA140) touchscreen
+ * (C) 2020 Linus Walleij <linus.walleij@linaro.org>
+ * (C) 2007 Cypress
+ * (C) 2007 Google, Inc.
+ *
+ * Inspired by the tma140_skomer.c driver in the Samsung GT-S7710 code
+ * drop. The GT-S7710 is codenamed "Skomer", the code also indicates
+ * that the same touchscreen was used in a product called "Lucas".
+ *
+ * The code drop for GT-S7710 also contains a firmware downloader and
+ * 15 (!) versions of the firmware drop from Cypress. But here we assume
+ * the firmware got downloaded to the touchscreen flash successfully and
+ * just use it to read the fingers. The shipped vendor driver does the
+ * same.
+ */
+
+#include <asm/unaligned.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/input/touchscreen.h>
+#include <linux/input/mt.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/regulator/consumer.h>
+#include <linux/delay.h>
+
+#define CY8CTMA140_NAME			"cy8ctma140"
+
+#define CY8CTMA140_MAX_FINGERS		4
+
+#define CY8CTMA140_GET_FINGERS		0x00
+#define CY8CTMA140_GET_FW_INFO		0x19
+
+/* This message also fits some bytes for touchkeys, if used */
+#define CY8CTMA140_PACKET_SIZE		31
+
+#define CY8CTMA140_INVALID_BUFFER_BIT	5
+
+struct cy8ctma140 {
+	struct input_dev *input;
+	struct touchscreen_properties props;
+	struct device *dev;
+	struct i2c_client *client;
+	struct regulator_bulk_data regulators[2];
+	u8 prev_fingers;
+	u8 prev_f1id;
+	u8 prev_f2id;
+};
+
+static void cy8ctma140_report(struct cy8ctma140 *ts, u8 *data, int n_fingers)
+{
+	static const u8 contact_offsets[] = { 0x03, 0x09, 0x10, 0x16 };
+	u8 *buf;
+	u16 x, y;
+	u8 w;
+	u8 id;
+	int slot;
+	int i;
+
+	for (i = 0; i < n_fingers; i++) {
+		buf = &data[contact_offsets[i]];
+
+		/*
+		 * Odd contacts have contact ID in the lower nibble of
+		 * the preceding byte, whereas even contacts have it in
+		 * the upper nibble of the following byte.
+		 */
+		id = i % 2 ? buf[-1] & 0x0f : buf[5] >> 4;
+		slot = input_mt_get_slot_by_key(ts->input, id);
+		if (slot < 0)
+			continue;
+
+		x = get_unaligned_be16(buf);
+		y = get_unaligned_be16(buf + 2);
+		w = buf[4];
+
+		dev_dbg(ts->dev, "finger %d: ID %02x (%d, %d) w: %d\n",
+			slot, id, x, y, w);
+
+		input_mt_slot(ts->input, slot);
+		input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, true);
+		touchscreen_report_pos(ts->input, &ts->props, x, y, true);
+		input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR, w);
+	}
+
+	input_mt_sync_frame(ts->input);
+	input_sync(ts->input);
+}
+
+static irqreturn_t cy8ctma140_irq_thread(int irq, void *d)
+{
+	struct cy8ctma140 *ts = d;
+	u8 cmdbuf[] = { CY8CTMA140_GET_FINGERS };
+	u8 buf[CY8CTMA140_PACKET_SIZE];
+	struct i2c_msg msg[] = {
+		{
+			.addr = ts->client->addr,
+			.flags = 0,
+			.len = sizeof(cmdbuf),
+			.buf = cmdbuf,
+		}, {
+			.addr = ts->client->addr,
+			.flags = I2C_M_RD,
+			.len = sizeof(buf),
+			.buf = buf,
+		},
+	};
+	u8 n_fingers;
+	int ret;
+
+	ret = i2c_transfer(ts->client->adapter, msg, ARRAY_SIZE(msg));
+	if (ret != ARRAY_SIZE(msg)) {
+		if (ret < 0)
+			dev_err(ts->dev, "error reading message: %d\n", ret);
+		else
+			dev_err(ts->dev, "wrong number of messages\n");
+		goto out;
+	}
+
+	if (buf[1] & BIT(CY8CTMA140_INVALID_BUFFER_BIT)) {
+		dev_dbg(ts->dev, "invalid event\n");
+		goto out;
+	}
+
+	n_fingers = buf[2] & 0x0f;
+	if (n_fingers > CY8CTMA140_MAX_FINGERS) {
+		dev_err(ts->dev, "unexpected number of fingers: %d\n",
+			n_fingers);
+		goto out;
+	}
+
+	cy8ctma140_report(ts, buf, n_fingers);
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int cy8ctma140_init(struct cy8ctma140 *ts)
+{
+	u8 addr[1];
+	u8 buf[5];
+	int ret;
+
+	addr[0] = CY8CTMA140_GET_FW_INFO;
+	ret = i2c_master_send(ts->client, addr, 1);
+	if (ret < 0) {
+		dev_err(ts->dev, "error sending FW info message\n");
+		return ret;
+	}
+	ret = i2c_master_recv(ts->client, buf, 5);
+	if (ret < 0) {
+		dev_err(ts->dev, "error receiving FW info message\n");
+		return ret;
+	}
+	if (ret != 5) {
+		dev_err(ts->dev, "got only %d bytes\n", ret);
+		return -EIO;
+	}
+
+	dev_dbg(ts->dev, "vendor %c%c, HW ID %.2d, FW ver %.4d\n",
+		buf[0], buf[1], buf[3], buf[4]);
+
+	return 0;
+}
+
+static int cy8ctma140_power_up(struct cy8ctma140 *ts)
+{
+	int error;
+
+	error = regulator_bulk_enable(ARRAY_SIZE(ts->regulators),
+				      ts->regulators);
+	if (error) {
+		dev_err(ts->dev, "failed to enable regulators\n");
+		return error;
+	}
+
+	msleep(250);
+
+	return 0;
+}
+
+static void cy8ctma140_power_down(struct cy8ctma140 *ts)
+{
+	regulator_bulk_disable(ARRAY_SIZE(ts->regulators),
+			       ts->regulators);
+}
+
+/* Called from the registered devm action */
+static void cy8ctma140_power_off_action(void *d)
+{
+	struct cy8ctma140 *ts = d;
+
+	cy8ctma140_power_down(ts);
+}
+
+static int cy8ctma140_probe(struct i2c_client *client,
+			    const struct i2c_device_id *id)
+{
+	struct cy8ctma140 *ts;
+	struct input_dev *input;
+	struct device *dev = &client->dev;
+	int error;
+
+	ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
+	if (!ts)
+		return -ENOMEM;
+
+	input = devm_input_allocate_device(dev);
+	if (!input)
+		return -ENOMEM;
+
+	ts->dev = dev;
+	ts->client = client;
+	ts->input = input;
+
+	input_set_capability(input, EV_ABS, ABS_MT_POSITION_X);
+	input_set_capability(input, EV_ABS, ABS_MT_POSITION_Y);
+	/* One byte for width 0..255 so this is the limit */
+	input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
+	/*
+	 * This sets up event max/min capabilities and fuzz.
+	 * Some DT properties are compulsory so we do not need
+	 * to provide defaults for X/Y max or pressure max.
+	 *
+	 * We just initialize a very simple MT touchscreen here,
+	 * some devices use the capability of this touchscreen to
+	 * provide touchkeys, and in that case this needs to be
+	 * extended to handle touchkey input.
+	 *
+	 * The firmware takes care of finger tracking and dropping
+	 * invalid ranges.
+	 */
+	touchscreen_parse_properties(input, true, &ts->props);
+	input_abs_set_fuzz(input, ABS_MT_POSITION_X, 0);
+	input_abs_set_fuzz(input, ABS_MT_POSITION_Y, 0);
+
+	error = input_mt_init_slots(input, CY8CTMA140_MAX_FINGERS,
+				  INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+	if (error)
+		return error;
+
+	input->name = CY8CTMA140_NAME;
+	input->id.bustype = BUS_I2C;
+	input_set_drvdata(input, ts);
+
+	/*
+	 * VCPIN is the analog voltage supply
+	 * VDD is the digital voltage supply
+	 * since the voltage range of VDD overlaps that of VCPIN,
+	 * many designs to just supply both with a single voltage
+	 * source of ~3.3 V.
+	 */
+	ts->regulators[0].supply = "vcpin";
+	ts->regulators[1].supply = "vdd";
+	error = devm_regulator_bulk_get(dev, ARRAY_SIZE(ts->regulators),
+				      ts->regulators);
+	if (error) {
+		if (error != -EPROBE_DEFER)
+			dev_err(dev, "Failed to get regulators %d\n",
+				error);
+		return error;
+	}
+
+	error = cy8ctma140_power_up(ts);
+	if (error)
+		return error;
+
+	error = devm_add_action_or_reset(dev, cy8ctma140_power_off_action, ts);
+	if (error) {
+		dev_err(dev, "failed to install power off handler\n");
+		return error;
+	}
+
+	error = devm_request_threaded_irq(dev, client->irq,
+					  NULL, cy8ctma140_irq_thread,
+					  IRQF_ONESHOT, CY8CTMA140_NAME, ts);
+	if (error) {
+		dev_err(dev, "irq %d busy? error %d\n", client->irq, error);
+		return error;
+	}
+
+	error = cy8ctma140_init(ts);
+	if (error)
+		return error;
+
+	error = input_register_device(input);
+	if (error)
+		return error;
+
+	i2c_set_clientdata(client, ts);
+
+	return 0;
+}
+
+static int __maybe_unused cy8ctma140_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct cy8ctma140 *ts = i2c_get_clientdata(client);
+
+	if (!device_may_wakeup(&client->dev))
+		cy8ctma140_power_down(ts);
+
+	return 0;
+}
+
+static int __maybe_unused cy8ctma140_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct cy8ctma140 *ts = i2c_get_clientdata(client);
+	int error;
+
+	if (!device_may_wakeup(&client->dev)) {
+		error = cy8ctma140_power_up(ts);
+		if (error)
+			return error;
+	}
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(cy8ctma140_pm, cy8ctma140_suspend, cy8ctma140_resume);
+
+static const struct i2c_device_id cy8ctma140_idtable[] = {
+	{ CY8CTMA140_NAME, 0 },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, cy8ctma140_idtable);
+
+static const struct of_device_id cy8ctma140_of_match[] = {
+	{ .compatible = "cypress,cy8ctma140", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, cy8ctma140_of_match);
+
+static struct i2c_driver cy8ctma140_driver = {
+	.driver		= {
+		.name	= CY8CTMA140_NAME,
+		.pm	= &cy8ctma140_pm,
+		.of_match_table = cy8ctma140_of_match,
+	},
+	.id_table	= cy8ctma140_idtable,
+	.probe		= cy8ctma140_probe,
+};
+module_i2c_driver(cy8ctma140_driver);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
+MODULE_DESCRIPTION("CY8CTMA140 TouchScreen Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/touchscreen/cyttsp4_core.c b/drivers/input/touchscreen/cyttsp4_core.c
index 6bcffc930384..02a73d9a4def 100644
--- a/drivers/input/touchscreen/cyttsp4_core.c
+++ b/drivers/input/touchscreen/cyttsp4_core.c
@@ -744,8 +744,7 @@ static void cyttsp4_report_slot_liftoff(struct cyttsp4_mt_data *md,
 
 	for (t = 0; t < max_slots; t++) {
 		input_mt_slot(md->input, t);
-		input_mt_report_slot_state(md->input,
-			MT_TOOL_FINGER, false);
+		input_mt_report_slot_inactive(md->input);
 	}
 }
 
@@ -845,7 +844,7 @@ static void cyttsp4_final_sync(struct input_dev *input, int max_slots, int *ids)
 		if (ids[t])
 			continue;
 		input_mt_slot(input, t);
-		input_mt_report_slot_state(input, MT_TOOL_FINGER, false);
+		input_mt_report_slot_inactive(input);
 	}
 
 	input_sync(input);
diff --git a/drivers/input/touchscreen/cyttsp_core.c b/drivers/input/touchscreen/cyttsp_core.c
index 3f5d463dbeed..697aa2c158f7 100644
--- a/drivers/input/touchscreen/cyttsp_core.c
+++ b/drivers/input/touchscreen/cyttsp_core.c
@@ -340,7 +340,7 @@ static void cyttsp_report_tchdata(struct cyttsp *ts)
 			continue;
 
 		input_mt_slot(input, i);
-		input_mt_report_slot_state(input, MT_TOOL_FINGER, false);
+		input_mt_report_slot_inactive(input);
 	}
 
 	input_sync(input);
diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index d2587724c52a..3a4f18d3450d 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -38,6 +38,9 @@
 #define WORK_REGISTER_NUM_X		0x33
 #define WORK_REGISTER_NUM_Y		0x34
 
+#define PMOD_REGISTER_ACTIVE		0x00
+#define PMOD_REGISTER_HIBERNATE		0x03
+
 #define M09_REGISTER_THRESHOLD		0x80
 #define M09_REGISTER_GAIN		0x92
 #define M09_REGISTER_OFFSET		0x93
@@ -53,6 +56,7 @@
 
 #define WORK_REGISTER_OPMODE		0x3c
 #define FACTORY_REGISTER_OPMODE		0x01
+#define PMOD_REGISTER_OPMODE		0xa5
 
 #define TOUCH_EVENT_DOWN		0x00
 #define TOUCH_EVENT_UP			0x01
@@ -65,6 +69,12 @@
 #define EDT_RAW_DATA_RETRIES		100
 #define EDT_RAW_DATA_DELAY		1000 /* usec */
 
+enum edt_pmode {
+	EDT_PMODE_NOT_SUPPORTED,
+	EDT_PMODE_HIBERNATE,
+	EDT_PMODE_POWEROFF,
+};
+
 enum edt_ver {
 	EDT_M06,
 	EDT_M09,
@@ -103,6 +113,7 @@ struct edt_ft5x06_ts_data {
 
 	struct mutex mutex;
 	bool factory_mode;
+	enum edt_pmode suspend_mode;
 	int threshold;
 	int gain;
 	int offset;
@@ -527,6 +538,29 @@ static const struct attribute_group edt_ft5x06_attr_group = {
 	.attrs = edt_ft5x06_attrs,
 };
 
+static void edt_ft5x06_restore_reg_parameters(struct edt_ft5x06_ts_data *tsdata)
+{
+	struct edt_reg_addr *reg_addr = &tsdata->reg_addr;
+
+	edt_ft5x06_register_write(tsdata, reg_addr->reg_threshold,
+				  tsdata->threshold);
+	edt_ft5x06_register_write(tsdata, reg_addr->reg_gain,
+				  tsdata->gain);
+	if (reg_addr->reg_offset != NO_REGISTER)
+		edt_ft5x06_register_write(tsdata, reg_addr->reg_offset,
+					  tsdata->offset);
+	if (reg_addr->reg_offset_x != NO_REGISTER)
+		edt_ft5x06_register_write(tsdata, reg_addr->reg_offset_x,
+					  tsdata->offset_x);
+	if (reg_addr->reg_offset_y != NO_REGISTER)
+		edt_ft5x06_register_write(tsdata, reg_addr->reg_offset_y,
+					  tsdata->offset_y);
+	if (reg_addr->reg_report_rate != NO_REGISTER)
+		edt_ft5x06_register_write(tsdata, reg_addr->reg_report_rate,
+				  tsdata->report_rate);
+
+}
+
 #ifdef CONFIG_DEBUG_FS
 static int edt_ft5x06_factory_mode(struct edt_ft5x06_ts_data *tsdata)
 {
@@ -592,7 +626,6 @@ static int edt_ft5x06_work_mode(struct edt_ft5x06_ts_data *tsdata)
 {
 	struct i2c_client *client = tsdata->client;
 	int retries = EDT_SWITCH_MODE_RETRIES;
-	struct edt_reg_addr *reg_addr = &tsdata->reg_addr;
 	int ret;
 	int error;
 
@@ -624,24 +657,7 @@ static int edt_ft5x06_work_mode(struct edt_ft5x06_ts_data *tsdata)
 	kfree(tsdata->raw_buffer);
 	tsdata->raw_buffer = NULL;
 
-	/* restore parameters */
-	edt_ft5x06_register_write(tsdata, reg_addr->reg_threshold,
-				  tsdata->threshold);
-	edt_ft5x06_register_write(tsdata, reg_addr->reg_gain,
-				  tsdata->gain);
-	if (reg_addr->reg_offset != NO_REGISTER)
-		edt_ft5x06_register_write(tsdata, reg_addr->reg_offset,
-					  tsdata->offset);
-	if (reg_addr->reg_offset_x != NO_REGISTER)
-		edt_ft5x06_register_write(tsdata, reg_addr->reg_offset_x,
-					  tsdata->offset_x);
-	if (reg_addr->reg_offset_y != NO_REGISTER)
-		edt_ft5x06_register_write(tsdata, reg_addr->reg_offset_y,
-					  tsdata->offset_y);
-	if (reg_addr->reg_report_rate != NO_REGISTER)
-		edt_ft5x06_register_write(tsdata, reg_addr->reg_report_rate,
-				  tsdata->report_rate);
-
+	edt_ft5x06_restore_reg_parameters(tsdata);
 	enable_irq(client->irq);
 
 	return 0;
@@ -762,9 +778,8 @@ static const struct file_operations debugfs_raw_data_fops = {
 	.read = edt_ft5x06_debugfs_raw_data_read,
 };
 
-static void
-edt_ft5x06_ts_prepare_debugfs(struct edt_ft5x06_ts_data *tsdata,
-			      const char *debugfs_name)
+static void edt_ft5x06_ts_prepare_debugfs(struct edt_ft5x06_ts_data *tsdata,
+					  const char *debugfs_name)
 {
 	tsdata->debug_dir = debugfs_create_dir(debugfs_name, NULL);
 
@@ -777,8 +792,7 @@ edt_ft5x06_ts_prepare_debugfs(struct edt_ft5x06_ts_data *tsdata,
 			    tsdata->debug_dir, tsdata, &debugfs_raw_data_fops);
 }
 
-static void
-edt_ft5x06_ts_teardown_debugfs(struct edt_ft5x06_ts_data *tsdata)
+static void edt_ft5x06_ts_teardown_debugfs(struct edt_ft5x06_ts_data *tsdata)
 {
 	debugfs_remove_recursive(tsdata->debug_dir);
 	kfree(tsdata->raw_buffer);
@@ -786,14 +800,17 @@ edt_ft5x06_ts_teardown_debugfs(struct edt_ft5x06_ts_data *tsdata)
 
 #else
 
-static inline void
-edt_ft5x06_ts_prepare_debugfs(struct edt_ft5x06_ts_data *tsdata,
-			      const char *debugfs_name)
+static int edt_ft5x06_factory_mode(struct edt_ft5x06_ts_data *tsdata)
+{
+	return -ENOSYS;
+}
+
+static void edt_ft5x06_ts_prepare_debugfs(struct edt_ft5x06_ts_data *tsdata,
+					  const char *debugfs_name)
 {
 }
 
-static inline void
-edt_ft5x06_ts_teardown_debugfs(struct edt_ft5x06_ts_data *tsdata)
+static void edt_ft5x06_ts_teardown_debugfs(struct edt_ft5x06_ts_data *tsdata)
 {
 }
 
@@ -938,19 +955,25 @@ static void edt_ft5x06_ts_get_defaults(struct device *dev,
 
 	error = device_property_read_u32(dev, "offset", &val);
 	if (!error) {
-		edt_ft5x06_register_write(tsdata, reg_addr->reg_offset, val);
+		if (reg_addr->reg_offset != NO_REGISTER)
+			edt_ft5x06_register_write(tsdata,
+						  reg_addr->reg_offset, val);
 		tsdata->offset = val;
 	}
 
 	error = device_property_read_u32(dev, "offset-x", &val);
 	if (!error) {
-		edt_ft5x06_register_write(tsdata, reg_addr->reg_offset_x, val);
+		if (reg_addr->reg_offset_x != NO_REGISTER)
+			edt_ft5x06_register_write(tsdata,
+						  reg_addr->reg_offset_x, val);
 		tsdata->offset_x = val;
 	}
 
 	error = device_property_read_u32(dev, "offset-y", &val);
 	if (!error) {
-		edt_ft5x06_register_write(tsdata, reg_addr->reg_offset_y, val);
+		if (reg_addr->reg_offset_y != NO_REGISTER)
+			edt_ft5x06_register_write(tsdata,
+						  reg_addr->reg_offset_y, val);
 		tsdata->offset_y = val;
 	}
 }
@@ -1114,6 +1137,19 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
 		return error;
 	}
 
+	/*
+	 * Check which sleep modes we can support. Power-off requieres the
+	 * reset-pin to ensure correct power-down/power-up behaviour. Start with
+	 * the EDT_PMODE_POWEROFF test since this is the deepest possible sleep
+	 * mode.
+	 */
+	if (tsdata->reset_gpio)
+		tsdata->suspend_mode = EDT_PMODE_POWEROFF;
+	else if (tsdata->wake_gpio)
+		tsdata->suspend_mode = EDT_PMODE_HIBERNATE;
+	else
+		tsdata->suspend_mode = EDT_PMODE_NOT_SUPPORTED;
+
 	if (tsdata->wake_gpio) {
 		usleep_range(5000, 6000);
 		gpiod_set_value_cansleep(tsdata->wake_gpio, 1);
@@ -1227,6 +1263,102 @@ static int edt_ft5x06_ts_remove(struct i2c_client *client)
 	return 0;
 }
 
+static int __maybe_unused edt_ft5x06_ts_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client);
+	struct gpio_desc *reset_gpio = tsdata->reset_gpio;
+	int ret;
+
+	if (device_may_wakeup(dev))
+		return 0;
+
+	if (tsdata->suspend_mode == EDT_PMODE_NOT_SUPPORTED)
+		return 0;
+
+	/* Enter hibernate mode. */
+	ret = edt_ft5x06_register_write(tsdata, PMOD_REGISTER_OPMODE,
+					PMOD_REGISTER_HIBERNATE);
+	if (ret)
+		dev_warn(dev, "Failed to set hibernate mode\n");
+
+	if (tsdata->suspend_mode == EDT_PMODE_HIBERNATE)
+		return 0;
+
+	/*
+	 * Power-off according the datasheet. Cut the power may leaf the irq
+	 * line in an undefined state depending on the host pull resistor
+	 * settings. Disable the irq to avoid adjusting each host till the
+	 * device is back in a full functional state.
+	 */
+	disable_irq(tsdata->client->irq);
+
+	gpiod_set_value_cansleep(reset_gpio, 1);
+	usleep_range(1000, 2000);
+
+	ret = regulator_disable(tsdata->vcc);
+	if (ret)
+		dev_warn(dev, "Failed to disable vcc\n");
+
+	return 0;
+}
+
+static int __maybe_unused edt_ft5x06_ts_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client);
+	int ret = 0;
+
+	if (device_may_wakeup(dev))
+		return 0;
+
+	if (tsdata->suspend_mode == EDT_PMODE_NOT_SUPPORTED)
+		return 0;
+
+	if (tsdata->suspend_mode == EDT_PMODE_POWEROFF) {
+		struct gpio_desc *reset_gpio = tsdata->reset_gpio;
+
+		/*
+		 * We can't check if the regulator is a dummy or a real
+		 * regulator. So we need to specify the 5ms reset time (T_rst)
+		 * here instead of the 100us T_rtp time. We also need to wait
+		 * 300ms in case it was a real supply and the power was cutted
+		 * of. Toggle the reset pin is also a way to exit the hibernate
+		 * mode.
+		 */
+		gpiod_set_value_cansleep(reset_gpio, 1);
+		usleep_range(5000, 6000);
+
+		ret = regulator_enable(tsdata->vcc);
+		if (ret) {
+			dev_err(dev, "Failed to enable vcc\n");
+			return ret;
+		}
+
+		usleep_range(1000, 2000);
+		gpiod_set_value_cansleep(reset_gpio, 0);
+		msleep(300);
+
+		edt_ft5x06_restore_reg_parameters(tsdata);
+		enable_irq(tsdata->client->irq);
+
+		if (tsdata->factory_mode)
+			ret = edt_ft5x06_factory_mode(tsdata);
+	} else {
+		struct gpio_desc *wake_gpio = tsdata->wake_gpio;
+
+		gpiod_set_value_cansleep(wake_gpio, 0);
+		usleep_range(5000, 6000);
+		gpiod_set_value_cansleep(wake_gpio, 1);
+	}
+
+
+	return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(edt_ft5x06_ts_pm_ops,
+			 edt_ft5x06_ts_suspend, edt_ft5x06_ts_resume);
+
 static const struct edt_i2c_chip_data edt_ft5x06_data = {
 	.max_support_points = 5,
 };
@@ -1265,6 +1397,8 @@ static struct i2c_driver edt_ft5x06_ts_driver = {
 	.driver = {
 		.name = "edt_ft5x06",
 		.of_match_table = edt_ft5x06_of_match,
+		.pm = &edt_ft5x06_ts_pm_ops,
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
 	},
 	.id_table = edt_ft5x06_ts_id,
 	.probe    = edt_ft5x06_ts_probe,
diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c
index 2289f9638116..233cb1085bbd 100644
--- a/drivers/input/touchscreen/elants_i2c.c
+++ b/drivers/input/touchscreen/elants_i2c.c
@@ -33,6 +33,7 @@
 #include <linux/slab.h>
 #include <linux/firmware.h>
 #include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
 #include <linux/acpi.h>
 #include <linux/of.h>
 #include <linux/gpio/consumer.h>
@@ -89,6 +90,7 @@
 /* FW read command, 0x53 0x?? 0x0, 0x01 */
 #define E_ELAN_INFO_FW_VER	0x00
 #define E_ELAN_INFO_BC_VER	0x10
+#define E_ELAN_INFO_REK		0xE0
 #define E_ELAN_INFO_TEST_VER	0xE0
 #define E_ELAN_INFO_FW_ID	0xF0
 #define E_INFO_OSR		0xD6
@@ -136,6 +138,7 @@ struct elants_data {
 	unsigned int y_res;
 	unsigned int x_max;
 	unsigned int y_max;
+	struct touchscreen_properties prop;
 
 	enum elants_state state;
 	enum elants_iap_mode iap_mode;
@@ -189,7 +192,8 @@ static int elants_i2c_read(struct i2c_client *client, void *data, size_t size)
 
 static int elants_i2c_execute_command(struct i2c_client *client,
 				      const u8 *cmd, size_t cmd_size,
-				      u8 *resp, size_t resp_size)
+				      u8 *resp, size_t resp_size,
+				      int retries, const char *cmd_name)
 {
 	struct i2c_msg msgs[2];
 	int ret;
@@ -209,30 +213,55 @@ static int elants_i2c_execute_command(struct i2c_client *client,
 		break;
 
 	default:
-		dev_err(&client->dev, "%s: invalid command %*ph\n",
-			__func__, (int)cmd_size, cmd);
+		dev_err(&client->dev, "(%s): invalid command: %*ph\n",
+			cmd_name, (int)cmd_size, cmd);
 		return -EINVAL;
 	}
 
-	msgs[0].addr = client->addr;
-	msgs[0].flags = client->flags & I2C_M_TEN;
-	msgs[0].len = cmd_size;
-	msgs[0].buf = (u8 *)cmd;
+	for (;;) {
+		msgs[0].addr = client->addr;
+		msgs[0].flags = client->flags & I2C_M_TEN;
+		msgs[0].len = cmd_size;
+		msgs[0].buf = (u8 *)cmd;
+
+		msgs[1].addr = client->addr;
+		msgs[1].flags = (client->flags & I2C_M_TEN) | I2C_M_RD;
+		msgs[1].flags |= I2C_M_RD;
+		msgs[1].len = resp_size;
+		msgs[1].buf = resp;
+
+		ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+		if (ret < 0) {
+			if (--retries > 0) {
+				dev_dbg(&client->dev,
+					"(%s) I2C transfer failed: %pe (retrying)\n",
+					cmd_name, ERR_PTR(ret));
+				continue;
+			}
 
-	msgs[1].addr = client->addr;
-	msgs[1].flags = client->flags & I2C_M_TEN;
-	msgs[1].flags |= I2C_M_RD;
-	msgs[1].len = resp_size;
-	msgs[1].buf = resp;
+			dev_err(&client->dev,
+				"(%s) I2C transfer failed: %pe\n",
+				cmd_name, ERR_PTR(ret));
+			return ret;
+		}
 
-	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
-	if (ret < 0)
-		return ret;
+		if (ret != ARRAY_SIZE(msgs) ||
+		    resp[FW_HDR_TYPE] != expected_response) {
+			if (--retries > 0) {
+				dev_dbg(&client->dev,
+					"(%s) unexpected response: %*ph (retrying)\n",
+					cmd_name, ret, resp);
+				continue;
+			}
 
-	if (ret != ARRAY_SIZE(msgs) || resp[FW_HDR_TYPE] != expected_response)
-		return -EIO;
+			dev_err(&client->dev,
+				"(%s) unexpected response: %*ph\n",
+				cmd_name, ret, resp);
+			return -EIO;
+		}
 
-	return 0;
+		return 0;
+	}
 }
 
 static int elants_i2c_calibrate(struct elants_data *ts)
@@ -305,27 +334,21 @@ static u16 elants_i2c_parse_version(u8 *buf)
 static int elants_i2c_query_hw_version(struct elants_data *ts)
 {
 	struct i2c_client *client = ts->client;
-	int error, retry_cnt;
+	int retry_cnt = MAX_RETRIES;
 	const u8 cmd[] = { CMD_HEADER_READ, E_ELAN_INFO_FW_ID, 0x00, 0x01 };
 	u8 resp[HEADER_SIZE];
+	int error;
 
-	for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) {
+	while (retry_cnt--) {
 		error = elants_i2c_execute_command(client, cmd, sizeof(cmd),
-						   resp, sizeof(resp));
-		if (!error) {
-			ts->hw_version = elants_i2c_parse_version(resp);
-			if (ts->hw_version != 0xffff)
-				return 0;
-		}
-
-		dev_dbg(&client->dev, "read fw id error=%d, buf=%*phC\n",
-			error, (int)sizeof(resp), resp);
-	}
+						   resp, sizeof(resp), 1,
+						   "read fw id");
+		if (error)
+			return error;
 
-	if (error) {
-		dev_err(&client->dev,
-			"Failed to read fw id: %d\n", error);
-		return error;
+		ts->hw_version = elants_i2c_parse_version(resp);
+		if (ts->hw_version != 0xffff)
+			return 0;
 	}
 
 	dev_err(&client->dev, "Invalid fw id: %#04x\n", ts->hw_version);
@@ -336,26 +359,27 @@ static int elants_i2c_query_hw_version(struct elants_data *ts)
 static int elants_i2c_query_fw_version(struct elants_data *ts)
 {
 	struct i2c_client *client = ts->client;
-	int error, retry_cnt;
+	int retry_