Merge tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Allow built-in drivers, not just modular drivers, to use async
     initial probing (Lukas Wunner)

   - Support Immediate Readiness even on devices with no PM Capability
     (Sean Christopherson)

   - Consolidate definition of PCIE_RESET_CONFIG_WAIT_MS (100ms), the
     required delay between a reset and sending config requests to a
     device (Niklas Cassel)

   - Add pci_is_display() to check for "Display" base class and use it
     in ALSA hda, vfio, vga_switcheroo, vt-d (Mario Limonciello)

   - Allow 'isolated PCI functions' (multi-function devices without a
     function 0) for LoongArch, similar to s390 and jailhouse (Huacai
     Chen)

  Power control:

   - Add ability to enable optional slot clock for cases where the PCIe
     host controller and the slot are supplied by different clocks
     (Marek Vasut)

  PCIe native device hotplug:

   - Fix runtime PM ref imbalance on Hot-Plug Capable ports caused by
     misinterpreting a config read failure after a device has been
     removed (Lukas Wunner)

   - Avoid creating a useless PCIe port service device for pciehp if the
     slot is handled by the ACPI hotplug driver (Lukas Wunner)

   - Ignore ACPI hotplug slots when calculating depth of pciehp hotplug
     ports (Lukas Wunner)

  Virtualization:

   - Save VF resizable BAR state and restore it after reset (Michał
     Winiarski)

   - Allow IOV resources (VF BARs) to be resized (Michał Winiarski)

   - Add pci_iov_vf_bar_set_size() so drivers can control VF BAR size
     (Michał Winiarski)

  Endpoint framework:

   - Add RC-to-EP doorbell support using platform MSI controller,
     including a test case (Frank Li)

   - Allow BAR assignment via configfs so platforms have flexibility in
     determining BAR usage (Jerome Brunet)

  Native PCIe controller drivers:

   - Convert amazon,al-alpine-v[23]-pcie, apm,xgene-pcie,
     axis,artpec6-pcie, marvell,armada-3700-pcie, st,spear1340-pcie to
     DT schema format (Rob Herring)

   - Use dev_fwnode() instead of of_fwnode_handle() to remove OF
     dependency in altera (fixes an unused variable), designware-host,
     mediatek, mediatek-gen3, mobiveil, plda, xilinx, xilinx-dma,
     xilinx-nwl (Jiri Slaby, Arnd Bergmann)

   - Convert aardvark, altera, brcmstb, designware-host, iproc,
     mediatek, mediatek-gen3, mobiveil, plda, rcar-host, vmd, xilinx,
     xilinx-dma, xilinx-nwl from using pci_msi_create_irq_domain() to
     using msi_create_parent_irq_domain() instead; this makes the
     interrupt controller per-PCI device, allows dynamic allocation of
     vectors after initialization, and allows support of IMS (Nam Cao)

  APM X-Gene PCIe controller driver:

   - Rewrite MSI handling to MSI CPU affinity, drop useless CPU hotplug
     bits, use device-managed memory allocations, and clean things up
     (Marc Zyngier)

   - Probe xgene-msi as a standard platform driver rather than a
     subsys_initcall (Marc Zyngier)

  Broadcom STB PCIe controller driver:

   - Add optional DT 'num-lanes' property and if present, use it to
     override the Maximum Link Width advertised in Link Capabilities
     (Jim Quinlan)

  Cadence PCIe controller driver:

   - Use PCIe Message routing types from the PCI core rather than
     defining private ones (Hans Zhang)

  Freescale i.MX6 PCIe controller driver:

   - Add IMX8MQ_EP third 64-bit BAR in epc_features (Richard Zhu)

   - Add IMX8MM_EP and IMX8MP_EP fixed 256-byte BAR 4 in epc_features
     (Richard Zhu)

   - Configure LUT for MSI/IOMMU in Endpoint mode so Root Complex can
     trigger doorbel on Endpoint (Frank Li)

   - Remove apps_reset (LTSSM_EN) from
     imx_pcie_{assert,deassert}_core_reset(), which fixes a hotplug
     regression on i.MX8MM (Richard Zhu)

   - Delay Endpoint link start until configfs 'start' written (Richard
     Zhu)

  Intel VMD host bridge driver:

   - Add Intel Panther Lake (PTL)-H/P/U Vendor ID (George D Sworo)

  Qualcomm PCIe controller driver:

   - Add DT binding and driver support for SA8255p, which supports ECAM
     for Configuration Space access (Mayank Rana)

   - Update DT binding and driver to describe PHYs and per-Root Port
     resets in a Root Port stanza and deprecate describing them in the
     host bridge; this makes it possible to support multiple Root Ports
     in the future (Krishna Chaitanya Chundru)

   - Add Qualcomm QCS615 to SM8150 DT binding (Ziyue Zhang)

   - Add Qualcomm QCS8300 to SA8775p DT binding (Ziyue Zhang)

   - Drop TBU and ref clocks from Qualcomm SM8150 and SC8180x DT
     bindings (Konrad Dybcio)

   - Document 'link_down' reset in Qualcomm SA8775P DT binding (Ziyue
     Zhang)

   - Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
     (Niklas Cassel)

  Rockchip PCIe controller driver:

   - Drop unused PCIe Message routing and code definitions (Hans Zhang)

   - Remove several unused header includes (Hans Zhang)

   - Use standard PCIe config register definitions instead of
     rockchip-specific redefinitions (Geraldo Nascimento)

   - Set Target Link Speed to 5.0 GT/s before retraining so we have a
     chance to train at a higher speed (Geraldo Nascimento)

  Rockchip DesignWare PCIe controller driver:

   - Prevent race between link training and register update via DBI by
     inhibiting link training after hot reset and link down (Wilfred
     Mallawa)

   - Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
     (Niklas Cassel)

  Sophgo PCIe controller driver:

   - Add DT binding and driver for Sophgo SG2044 PCIe controller driver
     in Root Complex mode (Inochi Amaoto)

  Synopsys DesignWare PCIe controller driver:

   - Add required PCIE_RESET_CONFIG_WAIT_MS after waiting for Link up on
     Ports that support > 5.0 GT/s. Slower Ports still rely on the
     not-quite-correct PCIE_LINK_WAIT_SLEEP_MS 90ms default delay while
     waiting for the Link (Niklas Cassel)"

* tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
  dt-bindings: PCI: qcom,pcie-sa8775p: Document 'link_down' reset
  dt-bindings: PCI: Remove 83xx-512x-pci.txt
  dt-bindings: PCI: Convert amazon,al-alpine-v[23]-pcie to DT schema
  dt-bindings: PCI: Convert marvell,armada-3700-pcie to DT schema
  dt-bindings: PCI: Convert apm,xgene-pcie to DT schema
  dt-bindings: PCI: Convert axis,artpec6-pcie to DT schema
  dt-bindings: PCI: Convert st,spear1340-pcie to DT schema
  PCI: Move is_pciehp check out of pciehp_is_native()
  PCI: pciehp: Use is_pciehp instead of is_hotplug_bridge
  PCI/portdrv: Use is_pciehp instead of is_hotplug_bridge
  PCI/ACPI: Fix runtime PM ref imbalance on Hot-Plug Capable ports
  selftests: pci_endpoint: Add doorbell test case
  misc: pci_endpoint_test: Add doorbell test case
  PCI: endpoint: pci-epf-test: Add doorbell test support
  PCI: endpoint: Add pci_epf_align_inbound_addr() helper for inbound address alignment
  PCI: endpoint: pci-ep-msi: Add checks for MSI parent and mutability
  PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
  PCI: dwc: Add Sophgo SG2044 PCIe controller driver in Root Complex mode
  PCI: vmd: Switch to msi_create_parent_irq_domain()
  PCI: vmd: Convert to lock guards
  ...

1 files changed, 83 insertions, 0 deletions

diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c
index c4e5e2c977be..1c156a3f845e 100644
--- a/drivers/misc/pci_endpoint_test.c
+++ b/drivers/misc/pci_endpoint_test.c
@@ -37,6 +37,8 @@
 #define COMMAND_READ				BIT(3)
 #define COMMAND_WRITE				BIT(4)
 #define COMMAND_COPY				BIT(5)
+#define COMMAND_ENABLE_DOORBELL			BIT(6)
+#define COMMAND_DISABLE_DOORBELL		BIT(7)
 
 #define PCI_ENDPOINT_TEST_STATUS		0x8
 #define STATUS_READ_SUCCESS			BIT(0)
@@ -48,6 +50,11 @@
 #define STATUS_IRQ_RAISED			BIT(6)
 #define STATUS_SRC_ADDR_INVALID			BIT(7)
 #define STATUS_DST_ADDR_INVALID			BIT(8)
+#define STATUS_DOORBELL_SUCCESS			BIT(9)
+#define STATUS_DOORBELL_ENABLE_SUCCESS		BIT(10)
+#define STATUS_DOORBELL_ENABLE_FAIL		BIT(11)
+#define STATUS_DOORBELL_DISABLE_SUCCESS		BIT(12)
+#define STATUS_DOORBELL_DISABLE_FAIL		BIT(13)
 
 #define PCI_ENDPOINT_TEST_LOWER_SRC_ADDR	0x0c
 #define PCI_ENDPOINT_TEST_UPPER_SRC_ADDR	0x10
@@ -62,6 +69,7 @@
 #define PCI_ENDPOINT_TEST_IRQ_NUMBER		0x28
 
 #define PCI_ENDPOINT_TEST_FLAGS			0x2c
+
 #define FLAG_USE_DMA				BIT(0)
 
 #define PCI_ENDPOINT_TEST_CAPS			0x30
@@ -70,6 +78,10 @@
 #define CAP_MSIX				BIT(2)
 #define CAP_INTX				BIT(3)
 
+#define PCI_ENDPOINT_TEST_DB_BAR		0x34
+#define PCI_ENDPOINT_TEST_DB_OFFSET		0x38
+#define PCI_ENDPOINT_TEST_DB_DATA		0x3c
+
 #define PCI_DEVICE_ID_TI_AM654			0xb00c
 #define PCI_DEVICE_ID_TI_J7200			0xb00f
 #define PCI_DEVICE_ID_TI_AM64			0xb010
@@ -100,6 +112,7 @@ enum pci_barno {
 	BAR_3,
 	BAR_4,
 	BAR_5,
+	NO_BAR = -1,
 };
 
 struct pci_endpoint_test {
@@ -841,6 +854,73 @@ static int pci_endpoint_test_set_irq(struct pci_endpoint_test *test,
 	return 0;
 }
 
+static int pci_endpoint_test_doorbell(struct pci_endpoint_test *test)
+{
+	struct pci_dev *pdev = test->pdev;
+	struct device *dev = &pdev->dev;
+	int irq_type = test->irq_type;
+	enum pci_barno bar;
+	u32 data, status;
+	u32 addr;
+	int left;
+
+	if (irq_type < PCITEST_IRQ_TYPE_INTX ||
+	    irq_type > PCITEST_IRQ_TYPE_MSIX) {
+		dev_err(dev, "Invalid IRQ type\n");
+		return -EINVAL;
+	}
+
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, irq_type);
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, 1);
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
+				 COMMAND_ENABLE_DOORBELL);
+
+	left = wait_for_completion_timeout(&test->irq_raised, msecs_to_jiffies(1000));
+
+	status = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_STATUS);
+	if (!left || (status & STATUS_DOORBELL_ENABLE_FAIL)) {
+		dev_err(dev, "Failed to enable doorbell\n");
+		return -EINVAL;
+	}
+
+	data = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_DB_DATA);
+	addr = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_DB_OFFSET);
+	bar = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_DB_BAR);
+
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, irq_type);
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, 1);
+
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_STATUS, 0);
+
+	bar = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_DB_BAR);
+
+	writel(data, test->bar[bar] + addr);
+
+	left = wait_for_completion_timeout(&test->irq_raised, msecs_to_jiffies(1000));
+
+	status = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_STATUS);
+
+	if (!left || !(status & STATUS_DOORBELL_SUCCESS))
+		dev_err(dev, "Failed to trigger doorbell in endpoint\n");
+
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
+				 COMMAND_DISABLE_DOORBELL);
+
+	wait_for_completion_timeout(&test->irq_raised, msecs_to_jiffies(1000));
+
+	status |= pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_STATUS);
+
+	if (status & STATUS_DOORBELL_DISABLE_FAIL) {
+		dev_err(dev, "Failed to disable doorbell\n");
+		return -EINVAL;
+	}
+
+	if (!(status & STATUS_DOORBELL_SUCCESS))
+		return -EINVAL;
+
+	return 0;
+}
+
 static long pci_endpoint_test_ioctl(struct file *file, unsigned int cmd,
 				    unsigned long arg)
 {
@@ -891,6 +971,9 @@ static long pci_endpoint_test_ioctl(struct file *file, unsigned int cmd,
 	case PCITEST_CLEAR_IRQ:
 		ret = pci_endpoint_test_clear_irq(test);
 		break;
+	case PCITEST_DOORBELL:
+		ret = pci_endpoint_test_doorbell(test);
+		break;
 	}
 
 ret: