Merge tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel

Pull drm updates from Dave Airlie:
 "cross-subsystem:
   - i2c-hid: Make elan touch controllers power on after panel is
     enabled
   - dt bindings for STM32MP25 SoC
   - pci vgaarb: use screen_info helpers
   - rust pin-init updates
   - add MEI driver for late binding firmware update/load

  uapi:
   - add ioctl for reassigning GEM handles
   - provide boot_display attribute on boot-up devices

  core:
   - document DRM_MODE_PAGE_FLIP_EVENT
   - add vendor specific recovery method to drm device wedged uevent

  gem:
   - Simplify gpuvm locking

  ttm:
   - add interface to populate buffers

  sched:
   - Fix race condition in trace code

  atomic:
   - Reallow no-op async page flips

  display:
   - dp: Fix command length

  video:
   - Improve pixel-format handling for struct screen_info

  rust:
   - drop Opaque<> from ioctl args
   - Alloc:
       - BorrowedPage type and AsPageIter traits
       - Implement Vmalloc::to_page() and VmallocPageIter
   - DMA/Scatterlist:
       - Add dma::DataDirection and type alias for dma_addr_t
       - Abstraction for struct scatterlist and sg_table
   - DRM:
       - simplify use of generics
       - add DriverFile type alias
       - drop Object::SIZE
   - Rust:
       - pin-init tree merge
       - Various methods for AsBytes and FromBytes traits

  gpuvm:
   - Support madvice in Xe driver

  gpusvm:
   - fix hmm_pfn_to_map_order usage in gpusvm

  bridge:
   - Improve and fix ref counting on bridge management
   - cdns-dsi: Various improvements to mode setting
   - Support Solomon SSD2825 plus DT bindings
   - Support Waveshare DSI2DPI plus DT bindings
   - Support Content Protection property
   - display-connector: Improve DP display detection
   - Add support for Radxa Ra620 plus DT bindings
   - adv7511: Provide SPD and HDMI infoframes
   - it6505: Replace crypto_shash with sha()
   - synopsys: Add support for DW DPTX Controller plus DT bindings
   - adv7511: Write full Audio infoframe
   - ite6263: Support vendor-specific infoframes
   - simple: Add support for Realtek RTD2171 DP-to-HDMI plus DT bindings

  panel:
   - panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64;
     Support SHP LQ134Z1; Fixes
   - panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings
   - Support Samsung AMS561RA01
   - Support Hydis HV101HD1 plus DT bindings
   - ilitek-ili9881c: Refactor mode setting; Add support for Bestar
     BSD1218-A101KL68 LCD plus DT bindings
   - lvds: Add support for Ampire AMP19201200B5TZQW-T03 to DT bindings
   - edp: Add support for additonal mt8189 Chromebook panels
   - lvds: Add DT bindings for EDT ETML0700Z8DHA

  amdgpu:
   - add CRIU support for gem objects
   - RAS updates
   - VCN SRAM load fixes
   - EDID read fixes
   - eDP ALPM support
   - Documentation updates
   - Rework PTE flag generation
   - DCE6 fixes
   - VCN devcoredump cleanup
   - MMHUB client id fixes
   - VCN 5.0.1 RAS support
   - SMU 13.0.x updates
   - Expanded PCIe DPC support
   - Expanded VCN reset support
   - VPE per queue reset support
   - give kernel jobs unique id for tracing
   - pre-populate exported buffers
   - cyan skillfish updates
   - make vbios build number available in sysfs
   - userq updates
   - HDCP updates
   - support MMIO remap page as ttm pool
   - JPEG parser updates
   - DCE6 DC updates
   - use devm for i2c buses
   - GPUVM locking updates
   - Drop non-DC DCE11 code
   - improve fallback handling for pixel encoding

  amdkfd:
   - SVM/page migration fixes
   - debugfs fixes
   - add CRIO support for gem objects
   - SVM updates

  radeon:
   - use dev_warn_once in CS parsers

  xe:
   - add madvise interface
   - add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count
     and memory attributes
   - drop L# bank mask reporting from media GT3 on Xe3+.
   - add SLPC power_profile sysfs interface
   - add configs attribs to add post/mid context-switch commands
   - handle firmware reported hardware errors notifying userspace with
     device wedged uevent
   - use same dir structure across sysfs/debugfs
   - cleanup and future proof vram region init
   - add G-states and PCI link states to debugfs
   - Add SRIOV support for CCS surfaces on Xe2+
   - Enable SRIOV PF mode by default on supported platforms
   - move flush to common code
   - extended core workarounds for Xe2/3
   - use DRM scheduler for delayed GT TLB invalidations
   - configs improvements and allow VF device enablement
   - prep work to expose mmio regions to userspace
   - VF migration support added
   - prepare GPU SVM for THP migration
   - start fixing XE_PAGE_SIZE vs PAGE_SIZE
   - add PSMI support for hw validation
   - resize VF bars to max possible size according to number of VFs
   - Ensure GT is in C0 during resume
   - pre-populate exported buffers
   - replace xe_hmm with gpusvm
   - add more SVM GT stats to debugfs
   - improve fake pci and WA kunnit handle for new platform testing
   - Test GuC to GuC comms to add debugging
   - use attribute groups to simplify sysfs registration
   - add Late Binding firmware code to interact with MEI

  i915:
   - apply multiple JSL/EHL/Gen7/Gen6 workarounds properly
   - protect against overflow in active_engine()
   - Use try_cmpxchg64() in __active_lookup()
   - include GuC registers in error state
   - get rid of dev->struct_mutex
   - iopoll: generalize read_poll_timout
   - lots more display refactoring
   - Reject HBR3 in any eDP Panel
   - Prune modes for YUV420
   - Display Wa fix, additions, and updates
   - DP: Fix 2.7 Gbps link training on g4x
   - DP: Adjust the idle pattern handling
   - DP: Shuffle the link training code a bit
   - Don't set/read the DSI C clock divider on GLK
   - Enable_psr kernel parameter changes
   - Type-C enabled/disconnected dp-alt sink
   - Wildcat Lake enabling
   - DP HDR updates
   - DRAM detection
   - wait PSR idle on dsb commit
   - Remove FBC modulo 4 restriction for ADL-P+
   - panic: refactor framebuffer allocation

  habanalabs:
   - debug/visibility improvements
   - vmalloc-backed coherent mmap support
   - HLDIO infrastructure

  nova-core:
   - various register!() macro improvements
   - minor vbios/firmware fixes/refactoring
   - advance firmware boot stages; process Booter and patch signatures
   - process GSP and GSP bootloader
   - Add r570.144 firmware bindings and update to it
   - Move GSP boot code to own module
   - Use new pin-init features to store driver's private data in a
     single allocation
   - Update ARef import from sync::aref

  nova-drm:
   - Update ARef import from sync::aref

  tyr:
   - initial driver skeleton for a rust driver for ARM Mali GPUs
   - capable of powering up, query metadata and provide it to userspace.

  msm:
   - GPU and Core:
      - in DT bindings describe clocks per GPU type
      - GMU bandwidth voting for x1-85
      - a623/a663 speedbins
      - cleanup some remaining no-iommu leftovers after VM_BIND conversion
      - fix GEM obj 32b size truncation
      - add missing VM_BIND param validation
      - IFPC for x1-85 and a750
      - register xml and gen_header.py sync from mesa
   - Display:
      - add missing bindings for display on SC8180X
      - added DisplayPort MST bindings
      - conversion from round_rate() to determine_rate()

  amdxdna:
   - add IOCTL_AMDXDNA_GET_ARRAY
   - support user space allocated buffers
   - streamline PM interfaces
   - Refactoring wrt. hardware contexts
   - improve error reporting

  nouveau:
   - use GSP firmware by default
   - improve error reporting
   - Pre-populate exported buffers

  ast:
   - Clean up detection of DRAM config

  exynos:
   - add DSIM bridge driver support for Exynos7870
   - Document Exynos7870 DSIM compatible in dt-binding

  panthor:
   - Print task/pid on errors
   - Add support for Mali G710, G510, G310, Gx15, Gx20, Gx25
   - Improve cache flushing
   - Fail VM bind if BO has offset

  renesas:
   - convert to RUNTIME_PM_OPS

  rcar-du:
   - Make number of lanes configurable
   - Use RUNTIME_PM_OPS
   - Add support for DSI commands

  rocket:
   - Add driver for Rockchip NPU plus DT bindings
   - Use kfree() and sizeof() correctly
   - Test DMA status

  rockchip:
   - dsi2: Add support for RK3576 plus DT bindings
   - Add support for RK3588 DPTX output

  tidss:
   - Use crtc_ fields for programming display mode
   - Remove other drivers from aperture

  pixpaper:
   - Add support for Mayqueen Pixpaper plus DT bindings

  v3d:
   - Support querying nubmer of GPU resets for KHR_robustness

  stm:
   - Clean up logging
   - ltdc: Add support support for STM32MP257F-EV1 plus DT bindings

  sitronix:
   - st7571-i2c: Add support for inverted displays and 2-bit grayscale

  tidss:
   - Convert to kernel's FIELD_ macros

  vesadrm:
   - Support 8-bit palette mode

  imagination:
   - Improve power management
   - Add support for TH1520 GPU
   - Support Risc-V architectures

  v3d:
   - Improve job management and locking

  vkms:
   - Support variants of ARGB8888, ARGB16161616, RGB565, RGB888 and P01x
   - Spport YUV with 16-bit components"

* tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel: (1455 commits)
  drm/amd: Add name to modes from amdgpu_connector_add_common_modes()
  drm/amd: Drop some common modes from amdgpu_connector_add_common_modes()
  drm/amdgpu: update MODULE_PARM_DESC for freesync_video
  drm/amd: Use dynamic array size declaration for amdgpu_connector_add_common_modes()
  drm/amd/display: Share dce100_validate_global with DCE6-8
  drm/amd/display: Share dce100_validate_bandwidth with DCE6-8
  drm/amdgpu: Fix fence signaling race condition in userqueue
  amd/amdkfd: enhance kfd process check in switch partition
  amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw
  drm/amd/display: Reject modes with too high pixel clock on DCE6-10
  drm/amd: Drop unnecessary check in amdgpu_connector_add_common_modes()
  drm/amd/display: Only enable common modes for eDP and LVDS
  drm/amdgpu: remove the redeclaration of variable i
  drm/amdgpu/userq: assign an error code for invalid userq va
  drm/amdgpu: revert "rework reserved VMID handling" v2
  drm/amdgpu: remove leftover from enforcing isolation by VMID
  drm/amdgpu: Add fallback to pipe reset if KCQ ring reset fails
  accel/habanalabs: add Infineon version check
  accel/habanalabs/gaudi2: read preboot status after recovering from dirty state
  accel/habanalabs: add HL_GET_P_STATE passthrough type
  ...

4 files changed, 339 insertions, 0 deletions

diff --git a/drivers/misc/mei/Kconfig b/drivers/misc/mei/Kconfig
index 7575fee96cc6..f8b04e49e4ba 100644
--- a/drivers/misc/mei/Kconfig
+++ b/drivers/misc/mei/Kconfig
@@ -81,6 +81,19 @@ config INTEL_MEI_VSC
 	  This driver can also be built as a module. If so, the module
 	  will be called mei-vsc.
 
+config INTEL_MEI_LB
+	tristate "Intel Late Binding (LB) support on ME Interface"
+	depends on INTEL_MEI_ME
+	depends on DRM_XE
+	help
+	  Enable support for Intel Late Binding (LB) via the MEI interface.
+
+	  Late Binding is a method for applying firmware updates at runtime,
+	  allowing the Intel Xe driver to load firmware payloads such as
+	  fan controller or voltage regulator. These firmware updates are
+	  authenticated and versioned, and do not require firmware flashing
+	  or system reboot.
+
 source "drivers/misc/mei/hdcp/Kconfig"
 source "drivers/misc/mei/pxp/Kconfig"
 source "drivers/misc/mei/gsc_proxy/Kconfig"
diff --git a/drivers/misc/mei/Makefile b/drivers/misc/mei/Makefile
index 6f9fdbf1a495..a203ed766b33 100644
--- a/drivers/misc/mei/Makefile
+++ b/drivers/misc/mei/Makefile
@@ -31,6 +31,7 @@ CFLAGS_mei-trace.o = -I$(src)
 obj-$(CONFIG_INTEL_MEI_HDCP) += hdcp/
 obj-$(CONFIG_INTEL_MEI_PXP) += pxp/
 obj-$(CONFIG_INTEL_MEI_GSC_PROXY) += gsc_proxy/
+obj-$(CONFIG_INTEL_MEI_LB) += mei_lb.o
 
 obj-$(CONFIG_INTEL_MEI_VSC_HW) += mei-vsc-hw.o
 mei-vsc-hw-y := vsc-tp.o
diff --git a/drivers/misc/mei/bus.c b/drivers/misc/mei/bus.c
index 5cc3ad07d5be..09aae8f9d225 100644
--- a/drivers/misc/mei/bus.c
+++ b/drivers/misc/mei/bus.c
@@ -615,6 +615,19 @@ u8 mei_cldev_ver(const struct mei_cl_device *cldev)
 EXPORT_SYMBOL_GPL(mei_cldev_ver);
 
 /**
+ * mei_cldev_mtu - max message that client can send and receive
+ *
+ * @cldev: mei client device
+ *
+ * Return: mtu or 0 if client is not connected
+ */
+size_t mei_cldev_mtu(const struct mei_cl_device *cldev)
+{
+	return mei_cl_mtu(cldev->cl);
+}
+EXPORT_SYMBOL_GPL(mei_cldev_mtu);
+
+/**
  * mei_cldev_enabled - check whether the device is enabled
  *
  * @cldev: mei client device
diff --git a/drivers/misc/mei/mei_lb.c b/drivers/misc/mei/mei_lb.c
new file mode 100644
index 000000000000..77686b108d3c
--- /dev/null
+++ b/drivers/misc/mei/mei_lb.c
@@ -0,0 +1,312 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 Intel Corporation
+ */
+
+#include <linux/component.h>
+#include <linux/mei_cl_bus.h>
+#include <linux/module.h>
+#include <linux/overflow.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/uuid.h>
+
+#include <drm/intel/i915_component.h>
+#include <drm/intel/intel_lb_mei_interface.h>
+
+#include "mkhi.h"
+
+/**
+ * DOC: Late Binding Firmware Update/Upload
+ *
+ * Late Binding is a firmware update/upload mechanism that allows configuration
+ * payloads to be securely delivered and applied at runtime, rather than
+ * being embedded in the system firmware image (e.g., IFWI or SPI flash).
+ *
+ * This mechanism is used to update device-level configuration such as:
+ * - Fan controller
+ * - Voltage regulator (VR)
+ *
+ * Key Characteristics:
+ * ---------------------
+ * - Runtime Delivery:
+ *   Firmware blobs are loaded by the host driver (e.g., Xe KMD)
+ *   after the GPU or SoC has booted.
+ *
+ * - Secure and Authenticated:
+ *   All payloads are signed and verified by the authentication firmware.
+ *
+ * - No Firmware Flashing Required:
+ *   Updates are applied in volatile memory and do not require SPI flash
+ *   modification or system reboot.
+ *
+ * - Re-entrant:
+ *   Multiple updates of the same or different types can be applied
+ *   sequentially within a single boot session.
+ *
+ * - Version Controlled:
+ *   Each payload includes version and security version number (SVN)
+ *   metadata to support anti-rollback enforcement.
+ *
+ * Upload Flow:
+ * ------------
+ * 1. Host driver (KMD or user-space tool) loads the late binding firmware.
+ * 2. Firmware is passed to the MEI interface and forwarded to
+ *    authentication firmware.
+ * 3. Authentication firmware authenticates the payload and extracts
+ *    command and data arrays.
+ * 4. Authentication firmware delivers the configuration to PUnit/PCODE.
+ * 5. Status is returned back to the host via MEI.
+ */
+
+#define INTEL_LB_CMD	0x12
+#define INTEL_LB_RSP	(INTEL_LB_CMD | 0x80)
+
+#define INTEL_LB_SEND_TIMEOUT_MSEC 3000
+#define INTEL_LB_RECV_TIMEOUT_MSEC 3000
+
+/**
+ * struct mei_lb_req - Late Binding request structure
+ * @header: MKHI message header (see struct mkhi_msg_hdr)
+ * @type: Type of the Late Binding payload
+ * @flags: Flags to be passed to the authentication firmware (e.g. %INTEL_LB_FLAGS_IS_PERSISTENT)
+ * @reserved: Reserved for future use by authentication firmware, must be set to 0
+ * @payload_size: Size of the payload data in bytes
+ * @payload: Payload data to be sent to the authentication firmware
+ */
+struct mei_lb_req {
+	struct mkhi_msg_hdr header;
+	__le32 type;
+	__le32 flags;
+	__le32 reserved[2];
+	__le32 payload_size;
+	u8 payload[] __counted_by(payload_size);
+} __packed;
+
+/**
+ * struct mei_lb_rsp - Late Binding response structure
+ * @header: MKHI message header (see struct mkhi_msg_hdr)
+ * @type: Type of the Late Binding payload
+ * @reserved: Reserved for future use by authentication firmware, must be set to 0
+ * @status: Status returned by authentication firmware (see &enum intel_lb_status)
+ */
+struct mei_lb_rsp {
+	struct mkhi_msg_hdr header;
+	__le32 type;
+	__le32 reserved[2];
+	__le32 status;
+} __packed;
+
+static bool mei_lb_check_response(const struct device *dev, ssize_t bytes,
+				  struct mei_lb_rsp *rsp)
+{
+	/*
+	 * Received message size may be smaller than the full message size when
+	 * reply contains only MKHI header with result field set to the error code.
+	 * Check the header size and content first to output exact error, if needed,
+	 * and then process to the whole message.
+	 */
+	if (bytes < sizeof(rsp->header)) {
+		dev_err(dev, "Received less than header size from the firmware: %zd < %zu\n",
+			bytes, sizeof(rsp->header));
+		return false;
+	}
+	if (rsp->header.group_id != MKHI_GROUP_ID_GFX) {
+		dev_err(dev, "Mismatch group id: 0x%x instead of 0x%x\n",
+			rsp->header.group_id, MKHI_GROUP_ID_GFX);
+		return false;
+	}
+	if (rsp->header.command != INTEL_LB_RSP) {
+		dev_err(dev, "Mismatch command: 0x%x instead of 0x%x\n",
+			rsp->header.command, INTEL_LB_RSP);
+		return false;
+	}
+	if (rsp->header.result) {
+		dev_err(dev, "Error in result: 0x%x\n", rsp->header.result);
+		return false;
+	}
+	if (bytes < sizeof(*rsp)) {
+		dev_err(dev, "Received less than message size from the firmware: %zd < %zu\n",
+			bytes, sizeof(*rsp));
+		return false;
+	}
+
+	return true;
+}
+
+static int mei_lb_push_payload(struct device *dev,
+			       enum intel_lb_type type, u32 flags,
+			       const void *payload, size_t payload_size)
+{
+	struct mei_cl_device *cldev;
+	struct mei_lb_req *req = NULL;
+	struct mei_lb_rsp rsp;
+	size_t req_size;
+	ssize_t bytes;
+	int ret;
+
+	cldev = to_mei_cl_device(dev);
+
+	ret = mei_cldev_enable(cldev);
+	if (ret) {
+		dev_dbg(dev, "Failed to enable firmware client. %d\n", ret);
+		return ret;
+	}
+
+	req_size = struct_size(req, payload, payload_size);
+	if (req_size > mei_cldev_mtu(cldev)) {
+		dev_err(dev, "Payload is too big: %zu\n", payload_size);
+		ret = -EMSGSIZE;
+		goto end;
+	}
+
+	req = kmalloc(req_size, GFP_KERNEL);
+	if (!req) {
+		ret = -ENOMEM;
+		goto end;
+	}
+
+	req->header.group_id = MKHI_GROUP_ID_GFX;
+	req->header.command = INTEL_LB_CMD;
+	req->type = cpu_to_le32(type);
+	req->flags = cpu_to_le32(flags);
+	req->reserved[0] = 0;
+	req->reserved[1] = 0;
+	req->payload_size = cpu_to_le32(payload_size);
+	memcpy(req->payload, payload, payload_size);
+
+	bytes = mei_cldev_send_timeout(cldev, (u8 *)req, req_size,
+				       INTEL_LB_SEND_TIMEOUT_MSEC);
+	if (bytes < 0) {
+		dev_err(dev, "Failed to send late binding request to firmware. %zd\n", bytes);
+		ret = bytes;
+		goto end;
+	}
+
+	bytes = mei_cldev_recv_timeout(cldev, (u8 *)&rsp, sizeof(rsp),
+				       INTEL_LB_RECV_TIMEOUT_MSEC);
+	if (bytes < 0) {
+		dev_err(dev, "Failed to receive late binding reply from MEI firmware. %zd\n",
+			bytes);
+		ret = bytes;
+		goto end;
+	}
+	if (!mei_lb_check_response(dev, bytes, &rsp)) {
+		dev_err(dev, "Bad response from the firmware. header: %02x %02x %02x %02x\n",
+			rsp.header.group_id, rsp.header.command,
+			rsp.header.reserved, rsp.header.result);
+		ret = -EPROTO;
+		goto end;
+	}
+
+	dev_dbg(dev, "status = %u\n", le32_to_cpu(rsp.status));
+	ret = (int)le32_to_cpu(rsp.status);
+end:
+	mei_cldev_disable(cldev);
+	kfree(req);
+	return ret;
+}
+
+static const struct intel_lb_component_ops mei_lb_ops = {
+	.push_payload = mei_lb_push_payload,
+};
+
+static int mei_lb_component_master_bind(struct device *dev)
+{
+	return component_bind_all(dev, (void *)&mei_lb_ops);
+}
+
+static void mei_lb_component_master_unbind(struct device *dev)
+{
+	component_unbind_all(dev, (void *)&mei_lb_ops);
+}
+
+static const struct component_master_ops mei_lb_component_master_ops = {
+	.bind = mei_lb_component_master_bind,
+	.unbind = mei_lb_component_master_unbind,
+};
+
+static int mei_lb_component_match(struct device *dev, int subcomponent,
+				  void *data)
+{
+	/*
+	 * This function checks if requester is Intel %PCI_CLASS_DISPLAY_VGA or
+	 * %PCI_CLASS_DISPLAY_OTHER device, and checks if the requester is the
+	 * grand parent of mei_if i.e. late bind MEI device
+	 */
+	struct device *base = data;
+	struct pci_dev *pdev;
+
+	if (!dev)
+		return 0;
+
+	if (!dev_is_pci(dev))
+		return 0;
+
+	pdev = to_pci_dev(dev);
+
+	if (pdev->vendor != PCI_VENDOR_ID_INTEL)
+		return 0;
+
+	if (pdev->class != (PCI_CLASS_DISPLAY_VGA << 8) &&
+	    pdev->class != (PCI_CLASS_DISPLAY_OTHER << 8))
+		return 0;
+
+	if (subcomponent != INTEL_COMPONENT_LB)
+		return 0;
+
+	base = base->parent;
+	if (!base) /* mei device */
+		return 0;
+
+	base = base->parent; /* pci device */
+
+	return !!base && dev == base;
+}
+
+static int mei_lb_probe(struct mei_cl_device *cldev,
+			const struct mei_cl_device_id *id)
+{
+	struct component_match *master_match = NULL;
+	int ret;
+
+	component_match_add_typed(&cldev->dev, &master_match,
+				  mei_lb_component_match, &cldev->dev);
+	if (IS_ERR_OR_NULL(master_match))
+		return -ENOMEM;
+
+	ret = component_master_add_with_match(&cldev->dev,
+					      &mei_lb_component_master_ops,
+					      master_match);
+	if (ret < 0)
+		dev_err(&cldev->dev, "Failed to add late binding master component. %d\n", ret);
+
+	return ret;
+}
+
+static void mei_lb_remove(struct mei_cl_device *cldev)
+{
+	component_master_del(&cldev->dev, &mei_lb_component_master_ops);
+}
+
+#define MEI_GUID_MKHI UUID_LE(0xe2c2afa2, 0x3817, 0x4d19, \
+			      0x9d, 0x95, 0x6, 0xb1, 0x6b, 0x58, 0x8a, 0x5d)
+
+static const struct mei_cl_device_id mei_lb_tbl[] = {
+	{ .uuid = MEI_GUID_MKHI, .version = MEI_CL_VERSION_ANY },
+	{ }
+};
+MODULE_DEVICE_TABLE(mei, mei_lb_tbl);
+
+static struct mei_cl_driver mei_lb_driver = {
+	.id_table = mei_lb_tbl,
+	.name = "mei_lb",
+	.probe = mei_lb_probe,
+	.remove	= mei_lb_remove,
+};
+
+module_mei_cl_driver(mei_lb_driver);
+
+MODULE_AUTHOR("Intel Corporation");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("MEI Late Binding Firmware Update/Upload");