Merge tag 'net-5.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Including fixes from can, xfrm, wifi, bluetooth, and netfilter.

  Lots of various size fixes, the length of the tag speaks for itself.
  Most of the 5.17-relevant stuff comes from xfrm, wifi and bt trees
  which had been lagging as you pointed out previously. But there's also
  a larger than we'd like portion of fixes for bugs from previous
  releases.

  Three more fixes still under discussion, including and xfrm revert for
  uAPI error.

  Current release - regressions:

   - iwlwifi: don't advertise TWT support, prevent FW crash

   - xfrm: fix the if_id check in changelink

   - xen/netfront: destroy queues before real_num_tx_queues is zeroed

   - bluetooth: fix not checking MGMT cmd pending queue, make scanning
     work again

  Current release - new code bugs:

   - mptcp: make SIOCOUTQ accurate for fallback socket

   - bluetooth: access skb->len after null check

   - bluetooth: hci_sync: fix not using conn_timeout

   - smc: fix cleanup when register ULP fails

   - dsa: restore error path of dsa_tree_change_tag_proto

   - iwlwifi: fix build error for IWLMEI

   - iwlwifi: mvm: propagate error from request_ownership to the user

  Previous releases - regressions:

   - xfrm: fix pMTU regression when reported pMTU is too small

   - xfrm: fix TCP MSS calculation when pMTU is close to 1280

   - bluetooth: fix bt_skb_sendmmsg not allocating partial chunks

   - ipv6: ensure we call ipv6_mc_down() at most once, prevent leaks

   - ipv6: prevent leaks in igmp6 when input queues get full

   - fix up skbs delta_truesize in UDP GRO frag_list

   - eth: e1000e: fix possible HW unit hang after an s0ix exit

   - eth: e1000e: correct NVM checksum verification flow

   - ptp: ocp: fix large time adjustments

  Previous releases - always broken:

   - tcp: make tcp_read_sock() more robust in presence of urgent data

   - xfrm: distinguishing SAs and SPs by if_id in xfrm_migrate

   - xfrm: fix xfrm_migrate issues when address family changes

   - dcb: flush lingering app table entries for unregistered devices

   - smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error

   - mac80211: fix EAPoL rekey fail in 802.3 rx path

   - mac80211: fix forwarded mesh frames AC & queue selection

   - netfilter: nf_queue: fix socket access races and bugs

   - batman-adv: fix ToCToU iflink problems and check the result belongs
     to the expected net namespace

   - can: gs_usb, etas_es58x: fix opened_channel_cnt's accounting

   - can: rcar_canfd: register the CAN device when fully ready

   - eth: igb, igc: phy: drop premature return leaking HW semaphore

   - eth: ixgbe: xsk: change !netif_carrier_ok() handling in
     ixgbe_xmit_zc(), prevent live lock when link goes down

   - eth: stmmac: only enable DMA interrupts when ready

   - eth: sparx5: move vlan checks before any changes are made

   - eth: iavf: fix races around init, removal, resets and vlan ops

   - ibmvnic: more reset flow fixes

  Misc:

   - eth: fix return value of __setup handlers"

* tag 'net-5.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits)
  ipv6: fix skb drops in igmp6_event_query() and igmp6_event_report()
  net: dsa: make dsa_tree_change_tag_proto actually unwind the tag proto change
  ixgbe: xsk: change !netif_carrier_ok() handling in ixgbe_xmit_zc()
  selftests: mlxsw: resource_scale: Fix return value
  selftests: mlxsw: tc_police_scale: Make test more robust
  net: dcb: disable softirqs in dcbnl_flush_dev()
  bnx2: Fix an error message
  sfc: extend the locking on mcdi->seqno
  net/smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error cause by server
  net/smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error generated by client
  net: arcnet: com20020: Fix null-ptr-deref in com20020pci_probe()
  tcp: make tcp_read_sock() more robust
  bpf, sockmap: Do not ignore orig_len parameter
  net: ipa: add an interconnect dependency
  net: fix up skbs delta_truesize in UDP GRO frag_list
  iwlwifi: mvm: return value for request_ownership
  nl80211: Update bss channel on channel switch for P2P_CLIENT
  iwlwifi: fix build error for IWLMEI
  ptp: ocp: Add ptp_ocp_adjtime_coarse for large adjustments
  batman-adv: Don't expect inter-netns unique iflink indices
  ...

30 files changed, 415 insertions, 170 deletions

diff --git a/drivers/net/arcnet/com20020-pci.c b/drivers/net/arcnet/com20020-pci.c
index 6382e1937cca..c580acb8b1d3 100644
--- a/drivers/net/arcnet/com20020-pci.c
+++ b/drivers/net/arcnet/com20020-pci.c
@@ -138,6 +138,9 @@ static int com20020pci_probe(struct pci_dev *pdev,
 		return -ENOMEM;
 
 	ci = (struct com20020_pci_card_info *)id->driver_data;
+	if (!ci)
+		return -EINVAL;
+
 	priv->ci = ci;
 	mm = &ci->misc_map;
 
diff --git a/drivers/net/can/rcar/rcar_canfd.c b/drivers/net/can/rcar/rcar_canfd.c
index b7dc1c32875f..acd74725831f 100644
--- a/drivers/net/can/rcar/rcar_canfd.c
+++ b/drivers/net/can/rcar/rcar_canfd.c
@@ -1715,15 +1715,15 @@ static int rcar_canfd_channel_probe(struct rcar_canfd_global *gpriv, u32 ch,
 
 	netif_napi_add(ndev, &priv->napi, rcar_canfd_rx_poll,
 		       RCANFD_NAPI_WEIGHT);
+	spin_lock_init(&priv->tx_lock);
+	devm_can_led_init(ndev);
+	gpriv->ch[priv->channel] = priv;
 	err = register_candev(ndev);
 	if (err) {
 		dev_err(&pdev->dev,
 			"register_candev() failed, error %d\n", err);
 		goto fail_candev;
 	}
-	spin_lock_init(&priv->tx_lock);
-	devm_can_led_init(ndev);
-	gpriv->ch[priv->channel] = priv;
 	dev_info(&pdev->dev, "device registered (channel %u)\n", priv->channel);
 	return 0;
 
diff --git a/drivers/net/can/usb/etas_es58x/es58x_core.c b/drivers/net/can/usb/etas_es58x/es58x_core.c
index 2ed2370a3166..2d73ebbf3836 100644
--- a/drivers/net/can/usb/etas_es58x/es58x_core.c
+++ b/drivers/net/can/usb/etas_es58x/es58x_core.c
@@ -1787,7 +1787,7 @@ static int es58x_open(struct net_device *netdev)
 	struct es58x_device *es58x_dev = es58x_priv(netdev)->es58x_dev;
 	int ret;
 
-	if (atomic_inc_return(&es58x_dev->opened_channel_cnt) == 1) {
+	if (!es58x_dev->opened_channel_cnt) {
 		ret = es58x_alloc_rx_urbs(es58x_dev);
 		if (ret)
 			return ret;
@@ -1805,12 +1805,13 @@ static int es58x_open(struct net_device *netdev)
 	if (ret)
 		goto free_urbs;
 
+	es58x_dev->opened_channel_cnt++;
 	netif_start_queue(netdev);
 
 	return ret;
 
  free_urbs:
-	if (atomic_dec_and_test(&es58x_dev->opened_channel_cnt))
+	if (!es58x_dev->opened_channel_cnt)
 		es58x_free_urbs(es58x_dev);
 	netdev_err(netdev, "%s: Could not open the network device: %pe\n",
 		   __func__, ERR_PTR(ret));
@@ -1845,7 +1846,8 @@ static int es58x_stop(struct net_device *netdev)
 
 	es58x_flush_pending_tx_msg(netdev);
 
-	if (atomic_dec_and_test(&es58x_dev->opened_channel_cnt))
+	es58x_dev->opened_channel_cnt--;
+	if (!es58x_dev->opened_channel_cnt)
 		es58x_free_urbs(es58x_dev);
 
 	return 0;
@@ -2215,7 +2217,6 @@ static struct es58x_device *es58x_init_es58x_dev(struct usb_interface *intf,
 	init_usb_anchor(&es58x_dev->tx_urbs_idle);
 	init_usb_anchor(&es58x_dev->tx_urbs_busy);
 	atomic_set(&es58x_dev->tx_urbs_idle_cnt, 0);
-	atomic_set(&es58x_dev->opened_channel_cnt, 0);
 	usb_set_intfdata(intf, es58x_dev);
 
 	es58x_dev->rx_pipe = usb_rcvbulkpipe(es58x_dev->udev,
diff --git a/drivers/net/can/usb/etas_es58x/es58x_core.h b/drivers/net/can/usb/etas_es58x/es58x_core.h
index 826a15871573..e5033cb5e695 100644
--- a/drivers/net/can/usb/etas_es58x/es58x_core.h
+++ b/drivers/net/can/usb/etas_es58x/es58x_core.h
@@ -373,8 +373,6 @@ struct es58x_operators {
  *	queue wake/stop logic should prevent this URB from getting
  *	empty. Please refer to es58x_get_tx_urb() for more details.
  * @tx_urbs_idle_cnt: number of urbs in @tx_urbs_idle.
- * @opened_channel_cnt: number of channels opened (c.f. es58x_open()
- *	and es58x_stop()).
  * @ktime_req_ns: kernel timestamp when es58x_set_realtime_diff_ns()
  *	was called.
  * @realtime_diff_ns: difference in nanoseconds between the clocks of
@@ -384,6 +382,10 @@ struct es58x_operators {
  *	in RX branches.
  * @rx_max_packet_size: Maximum length of bulk-in URB.
  * @num_can_ch: Number of CAN channel (i.e. number of elements of @netdev).
+ * @opened_channel_cnt: number of channels opened. Free of race
+ *	conditions because its two users (net_device_ops:ndo_open()
+ *	and net_device_ops:ndo_close()) guarantee that the network
+ *	stack big kernel lock (a.k.a. rtnl_mutex) is being hold.
  * @rx_cmd_buf_len: Length of @rx_cmd_buf.
  * @rx_cmd_buf: The device might split the URB commands in an
  *	arbitrary amount of pieces. This buffer is used to concatenate
@@ -406,7 +408,6 @@ struct es58x_device {
 	struct usb_anchor tx_urbs_busy;
 	struct usb_anchor tx_urbs_idle;
 	atomic_t tx_urbs_idle_cnt;
-	atomic_t opened_channel_cnt;
 
 	u64 ktime_req_ns;
 	s64 realtime_diff_ns;
@@ -415,6 +416,7 @@ struct es58x_device {
 
 	u16 rx_max_packet_size;
 	u8 num_can_ch;
+	u8 opened_channel_cnt;
 
 	u16 rx_cmd_buf_len;
 	union es58x_urb_cmd rx_cmd_buf;
diff --git a/drivers/net/can/usb/gs_usb.c b/drivers/net/can/usb/gs_usb.c
index b487e3fe770a..d35749fad1ef 100644
--- a/drivers/net/can/usb/gs_usb.c
+++ b/drivers/net/can/usb/gs_usb.c
@@ -191,8 +191,8 @@ struct gs_can {
 struct gs_usb {
 	struct gs_can *canch[GS_MAX_INTF];
 	struct usb_anchor rx_submitted;
-	atomic_t active_channels;
 	struct usb_device *udev;
+	u8 active_channels;
 };
 
 /* 'allocate' a tx context.
@@ -589,7 +589,7 @@ static int gs_can_open(struct net_device *netdev)
 	if (rc)
 		return rc;
 
-	if (atomic_add_return(1, &parent->active_channels) == 1) {
+	if (!parent->active_channels) {
 		for (i = 0; i < GS_MAX_RX_URBS; i++) {
 			struct urb *urb;
 			u8 *buf;
@@ -690,6 +690,7 @@ static int gs_can_open(struct net_device *netdev)
 
 	dev->can.state = CAN_STATE_ERROR_ACTIVE;
 
+	parent->active_channels++;
 	if (!(dev->can.ctrlmode & CAN_CTRLMODE_LISTENONLY))
 		netif_start_queue(netdev);
 
@@ -705,7 +706,8 @@ static int gs_can_close(struct net_device *netdev)
 	netif_stop_queue(netdev);
 
 	/* Stop polling */
-	if (atomic_dec_and_test(&parent->active_channels))
+	parent->active_channels--;
+	if (!parent->active_channels)
 		usb_kill_anchored_urbs(&parent->rx_submitted);
 
 	/* Stop sending URBs */
@@ -984,8 +986,6 @@ static int gs_usb_probe(struct usb_interface *intf,
 
 	init_usb_anchor(&dev->rx_submitted);
 
-	atomic_set(&dev->active_channels, 0);
-
 	usb_set_intfdata(intf, dev);
 	dev->udev = interface_to_usbdev(intf);
 
diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c
index e20aafeb4ca9..b97ed9b5f685 100644
--- a/drivers/net/ethernet/broadcom/bnx2.c
+++ b/drivers/net/ethernet/broadcom/bnx2.c
@@ -8216,7 +8216,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
 		rc = dma_set_coherent_mask(&pdev->dev, persist_dma_mask);
 		if (rc) {
 			dev_err(&pdev->dev,
-				"pci_set_consistent_dma_mask failed, aborting\n");
+				"dma_set_coherent_mask failed, aborting\n");
 			goto err_out_unmap;
 		}
 	} else if ((rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) != 0) {
diff --git a/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c b/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c
index da41eee2f25c..a06003bfa04b 100644
--- a/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c
@@ -3613,6 +3613,8 @@ int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai,
 	    MAC_STATS_ACCUM_SECS : (MAC_STATS_ACCUM_SECS * 10);
 	adapter->params.pci.vpd_cap_addr =
 	    pci_find_capability(adapter->pdev, PCI_CAP_ID_VPD);
+	if (!adapter->params.pci.vpd_cap_addr)
+		return -ENODEV;
 	ret = get_vpd_params(adapter, &adapter->params.vpd);
 	if (ret < 0)
 		return ret;
diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index dee05a353dbd..b423e94956f1 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -2213,6 +2213,19 @@ static const char *reset_reason_to_string(enum ibmvnic_reset_reason reason)
 }
 
 /*
+ * Initialize the init_done completion and return code values. We
+ * can get a transport event just after registering the CRQ and the
+ * tasklet will use this to communicate the transport event. To ensure
+ * we don't miss the notification/error, initialize these _before_
+ * regisering the CRQ.
+ */
+static inline void reinit_init_done(struct ibmvnic_adapter *adapter)
+{
+	reinit_completion(&adapter->init_done);
+	adapter->init_done_rc = 0;
+}
+
+/*
  * do_reset returns zero if we are able to keep processing reset events, or
  * non-zero if we hit a fatal error and must halt.
  */
@@ -2318,6 +2331,8 @@ static int do_reset(struct ibmvnic_adapter *adapter,
 		 */
 		adapter->state = VNIC_PROBED;
 
+		reinit_init_done(adapter);
+
 		if (adapter->reset_reason == VNIC_RESET_CHANGE_PARAM) {
 			rc = init_crq_queue(adapter);
 		} else if (adapter->reset_reason == VNIC_RESET_MOBILITY) {
@@ -2461,7 +2476,8 @@ static int do_hard_reset(struct ibmvnic_adapter *adapter,
 	 */
 	adapter->state = VNIC_PROBED;
 
-	reinit_completion(&adapter->init_done);
+	reinit_init_done(adapter);
+
 	rc = init_crq_queue(adapter);
 	if (rc) {
 		netdev_err(adapter->netdev,
@@ -2602,23 +2618,82 @@ out:
 static void __ibmvnic_reset(struct work_struct *work)
 {
 	struct ibmvnic_adapter *adapter;
-	bool saved_state = false;
+	unsigned int timeout = 5000;
 	struct ibmvnic_rwi *tmprwi;
+	bool saved_state = false;
 	struct ibmvnic_rwi *rwi;
 	unsigned long flags;
-	u32 reset_state;
+	struct device *dev;
+	bool need_reset;
 	int num_fails = 0;
+	u32 reset_state;
 	int rc = 0;
 
 	adapter = container_of(work, struct ibmvnic_adapter, ibmvnic_reset);
+		dev = &adapter->vdev->dev;
 
-	if (test_and_set_bit_lock(0, &adapter->resetting)) {
+	/* Wait for ibmvnic_probe() to complete. If probe is taking too long
+	 * or if another reset is in progress, defer work for now. If probe
+	 * eventually fails it will flush and terminate our work.
+	 *
+	 * Three possibilities here:
+	 * 1. Adpater being removed  - just return
+	 * 2. Timed out on probe or another reset in progress - delay the work
+	 * 3. Completed probe - perform any resets in queue
+	 */
+	if (adapter->state == VNIC_PROBING &&
+	    !wait_for_completion_timeout(&adapter->probe_done, timeout)) {
+		dev_err(dev, "Reset thread timed out on probe");
 		queue_delayed_work(system_long_wq,
 				   &adapter->ibmvnic_delayed_reset,
 				   IBMVNIC_RESET_DELAY);
 		return;
 	}
 
+	/* adapter is done with probe (i.e state is never VNIC_PROBING now) */
+	if (adapter->state == VNIC_REMOVING)
+		return;
+
+	/* ->rwi_list is stable now (no one else is removing entries) */
+
+	/* ibmvnic_probe() may have purged the reset queue after we were
+	 * scheduled to process a reset so there maybe no resets to process.
+	 * Before setting the ->resetting bit though, we have to make sure
+	 * that there is infact a reset to process. Otherwise we may race
+	 * with ibmvnic_open() and end up leaving the vnic down:
+	 *
+	 *	__ibmvnic_reset()	    ibmvnic_open()
+	 *	-----------------	    --------------
+	 *
+	 *  set ->resetting bit
+	 *  				find ->resetting bit is set
+	 *  				set ->state to IBMVNIC_OPEN (i.e
+	 *  				assume reset will open device)
+	 *  				return
+	 *  find reset queue empty
+	 *  return
+	 *
+	 *  	Neither performed vnic login/open and vnic stays down
+	 *
+	 * If we hold the lock and conditionally set the bit, either we
+	 * or ibmvnic_open() will complete the open.
+	 */
+	need_reset = false;
+	spin_lock(&adapter->rwi_lock);
+	if (!list_empty(&adapter->rwi_list)) {
+		if (test_and_set_bit_lock(0, &adapter->resetting)) {
+			queue_delayed_work(system_long_wq,
+					   &adapter->ibmvnic_delayed_reset,
+					   IBMVNIC_RESET_DELAY);
+		} else {
+			need_reset = true;
+		}
+	}
+	spin_unlock(&adapter->rwi_lock);
+
+	if (!need_reset)
+		return;
+
 	rwi = get_next_rwi(adapter);
 	while (rwi) {
 		spin_lock_irqsave(&adapter->state_lock, flags);
@@ -2735,12 +2810,23 @@ static void __ibmvnic_delayed_reset(struct work_struct *work)
 	__ibmvnic_reset(&adapter->ibmvnic_reset);
 }
 
+static void flush_reset_queue(struct ibmvnic_adapter *adapter)
+{
+	struct list_head *entry, *tmp_entry;
+
+	if (!list_empty(&adapter->rwi_list)) {
+		list_for_each_safe(entry, tmp_entry, &adapter->rwi_list) {
+			list_del(entry);
+			kfree(list_entry(entry, struct ibmvnic_rwi, list));
+		}
+	}
+}
+
 static int ibmvnic_reset(struct ibmvnic_adapter *adapter,
 			 enum ibmvnic_reset_reason reason)
 {
-	struct list_head *entry, *tmp_entry;
-	struct ibmvnic_rwi *rwi, *tmp;
 	struct net_device *netdev = adapter->netdev;
+	struct ibmvnic_rwi *rwi, *tmp;
 	unsigned long flags;
 	int ret;
 
@@ -2759,13 +2845,6 @@ static int ibmvnic_reset(struct ibmvnic_adapter *adapter,
 		goto err;
 	}
 
-	if (adapter->state == VNIC_PROBING) {
-		netdev_warn(netdev, "Adapter reset during probe\n");
-		adapter->init_done_rc = -EAGAIN;
-		ret = EAGAIN;
-		goto err;
-	}
-
 	list_for_each_entry(tmp, &adapter->rwi_list, list) {
 		if (tmp->reset_reason == reason) {
 			netdev_dbg(netdev, "Skipping matching reset, reason=%s\n",
@@ -2783,10 +2862,9 @@ static int ibmvnic_reset(struct ibmvnic_adapter *adapter,
 	/* if we just received a transport event,
 	 * flush reset queue and process this reset
 	 */
-	if (adapter->force_reset_recovery && !list_empty(&adapter->rwi_list)) {
-		list_for_each_safe(entry, tmp_entry, &adapter->rwi_list)
-			list_del(entry);
-	}
+	if (adapter->force_reset_recovery)
+		flush_reset_queue(adapter);
+
 	rwi->reset_reason = reason;
 	list_add_tail(&rwi->list, &adapter->rwi_list);
 	netdev_dbg(adapter->netdev, "Scheduling reset (reason %s)\n",
@@ -5321,9 +5399,9 @@ static void ibmvnic_handle_crq(union ibmvnic_crq *crq,
 			}
 
 			if (!completion_done(&adapter->init_done)) {
-				complete(&adapter->init_done);
 				if (!adapter->init_done_rc)
 					adapter->init_done_rc = -EAGAIN;
+				complete(&adapter->init_done);
 			}
 
 			break;
@@ -5346,6 +5424,13 @@ static void ibmvnic_handle_crq(union ibmvnic_crq *crq,
 			adapter->fw_done_rc = -EIO;
 			complete(&adapter->fw_done);
 		}
+
+		/* if we got here during crq-init, retry crq-init */
+		if (!completion_done(&adapter->init_done)) {
+			adapter->init_done_rc = -EAGAIN;
+			complete(&adapter->init_done);
+		}
+
 		if (!completion_done(&adapter->stats_done))
 			complete(&adapter->stats_done);
 		if (test_bit(0, &adapter->resetting))
@@ -5662,10 +5747,6 @@ static int ibmvnic_reset_init(struct ibmvnic_adapter *adapter, bool reset)
 
 	adapter->from_passive_init = false;
 
-	if (reset)
-		reinit_completion(&adapter->init_done);
-
-	adapter->init_done_rc = 0;
 	rc = ibmvnic_send_crq_init(adapter);
 	if (rc) {
 		dev_err(dev, "Send crq init failed with error %d\n", rc);
@@ -5679,12 +5760,14 @@ static int ibmvnic_reset_init(struct ibmvnic_adapter *adapter, bool reset)
 
 	if (adapter->init_done_rc) {
 		release_crq_queue(adapter);
+		dev_err(dev, "CRQ-init failed, %d\n", adapter->init_done_rc);
 		return adapter->init_done_rc;
 	}
 
 	if (adapter->from_passive_init) {
 		adapter->state = VNIC_OPEN;
 		adapter->from_passive_init = false;
+		dev_err(dev, "CRQ-init failed, passive-init\n");
 		return -EINVAL;
 	}
 
@@ -5724,6 +5807,7 @@ static int ibmvnic_probe(struct vio_dev *dev, const struct vio_device_id *id)
 	struct ibmvnic_adapter *adapter;
 	struct net_device *netdev;
 	unsigned char *mac_addr_p;
+	unsigned long flags;
 	bool init_success;
 	int rc;
 
@@ -5768,6 +5852,7 @@ static int ibmvnic_probe(struct vio_dev *dev, const struct vio_device_id *id)
 	spin_lock_init(&adapter->rwi_lock);
 	spin_lock_init(&adapter->state_lock);
 	mutex_init(&adapter->fw_lock);
+	init_completion(&adapter->probe_done);
 	init_completion(&adapter->init_done);
 	init_completion(&adapter->fw_done);
 	init_completion(&adapter->reset_done);
@@ -5778,6 +5863,33 @@ static int ibmvnic_probe(struct vio_dev *dev, const struct vio_device_id *id)
 
 	init_success = false;
 	do {
+		reinit_init_done(adapter);
+
+		/* clear any failovers we got in the previous pass
+		 * since we are reinitializing the CRQ
+		 */
+		adapter->failover_pending = false;
+
+		/* If we had already initialized CRQ, we may have one or
+		 * more resets queued already. Discard those and release
+		 * the CRQ before initializing the CRQ again.
+		 */
+		release_crq_queue(adapter);
+
+		/* Since we are still in PROBING state, __ibmvnic_reset()
+		 * will not access the ->rwi_list and since we released CRQ,
+		 * we won't get _new_ transport events. But there maybe an
+		 * ongoing ibmvnic_reset() call. So serialize access to
+		 * rwi_list. If we win the race, ibvmnic_reset() could add
+		 * a reset after we purged but thats ok - we just may end
+		 * up with an extra reset (i.e similar to having two or more
+		 * resets in the queue at once).
+		 * CHECK.
+		 */
+		spin_lock_irqsave(&adapter->rwi_lock, flags);
+		flush_reset_queue(adapter);
+		spin_unlock_irqrestore(&adapter->rwi_lock, flags);
+
 		rc = init_crq_queue(adapter);
 		if (rc) {
 			dev_err(&dev->dev, "Couldn't initialize crq. rc=%d\n",
@@ -5809,12 +5921,6 @@ static int ibmvnic_probe(struct vio_dev *dev, const struct vio_device_id *id)
 		goto ibmvnic_dev_file_err;
 
 	netif_carrier_off(netdev);
-	rc = register_netdev(netdev);
-	if (rc) {
-		dev_err(&dev->dev, "failed to register netdev rc=%d\n", rc);
-		goto ibmvnic_register_fail;
-	}
-	dev_info(&dev->dev, "ibmvnic registered\n");
 
 	if (init_success) {
 		adapter->state = VNIC_PROBED;
@@ -5827,6 +5933,16 @@ static int ibmvnic_probe(struct vio_dev *dev, const struct vio_device_id *id)
 
 	adapter->wait_for_reset = false;
 	adapter->last_reset_time = jiffies;
+
+	rc = register_netdev(netdev);
+	if (rc) {
+		dev_err(&dev->dev, "failed to register netdev rc=%d\n", rc);
+		goto ibmvnic_register_fail;
+	}
+	dev_info(&dev->dev, "ibmvnic registered\n");
+
+	complete(&adapter->probe_done);
+
 	return 0;
 
 ibmvnic_register_fail:
@@ -5841,6 +5957,17 @@ ibmvnic_stats_fail:
 ibmvnic_init_fail:
 	release_sub_crqs(adapter, 1);
 	release_crq_queue(adapter);
+
+	/* cleanup worker thread after releasing CRQ so we don't get
+	 * transport events (i.e new work items for the worker thread).
+	 */
+	adapter->state = VNIC_REMOVING;
+	complete(&adapter->probe_done);
+	flush_work(&adapter->ibmvnic_reset);
+	flush_delayed_work(&adapter->ibmvnic_delayed_reset);
+
+	flush_reset_queue(adapter);
+
 	mutex_destroy(&adapter->fw_lock);
 	free_netdev(netdev);
 
diff --git a/drivers/net/ethernet/ibm/ibmvnic.h b/drivers/net/ethernet/ibm/ibmvnic.h
index 4a7a56ff74ce..fa2d607a7b1b 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.h
+++ b/drivers/net/ethernet/ibm/ibmvnic.h
@@ -930,6 +930,7 @@ struct ibmvnic_adapter {
 
 	struct ibmvnic_tx_pool *tx_pool;
 	struct ibmvnic_tx_pool *tso_pool;
+	struct completion probe_done;
 	struct completion init_done;
 	int init_done_rc;
 
diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h
index bcf680e83811..13382df2f2ef 100644
--- a/drivers/net/ethernet/intel/e1000e/hw.h
+++ b/drivers/net/ethernet/intel/e1000e/hw.h
@@ -630,6 +630,7 @@ struct e1000_phy_info {
 	bool disable_polarity_correction;
 	bool is_mdix;
 	bool polarity_correction;
+	bool reset_disable;
 	bool speed_downgraded;
 	bool autoneg_wait_to_complete;
 };
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index c908c84b86d2..d60e2016d03c 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -2050,6 +2050,10 @@ static s32 e1000_check_reset_block_ich8lan(struct e1000_hw *hw)
 	bool blocked = false;
 	int i = 0;
 
+	/* Check the PHY (LCD) reset flag */
+	if (hw->phy.reset_disable)
+		return true;
+
 	while ((blocked = !(er32(FWSM) & E1000_ICH_FWSM_RSPCIPHY)) &&
 	       (i++ < 30))
 		usleep_range(10000, 11000);
@@ -4136,9 +4140,9 @@ static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw)
 		return ret_val;
 
 	if (!(data & valid_csum_mask)) {
-		e_dbg("NVM Checksum Invalid\n");
+		e_dbg("NVM Checksum valid bit not set\n");
 
-		if (hw->mac.type < e1000_pch_cnp) {
+		if (hw->mac.type < e1000_pch_tgp) {
 			data |= valid_csum_mask;
 			ret_val = e1000_write_nvm(hw, word, 1, &data);
 			if (ret_val)
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h
index 2504b11c3169..638a3ddd7ada 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.h
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h
@@ -271,6 +271,7 @@
 #define I217_CGFREG_ENABLE_MTA_RESET	0x0002
 #define I217_MEMPWR			PHY_REG(772, 26)
 #define I217_MEMPWR_DISABLE_SMB_RELEASE	0x0010
+#define I217_MEMPWR_MOEM		0x1000
 
 /* Receive Address Initial CRC Calculation */
 #define E1000_PCH_RAICC(_n)	(0x05F50 + ((_n) * 4))
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index a42aeb555f34..c5bdef3ffe26 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -6987,8 +6987,21 @@ static __maybe_unused int e1000e_pm_suspend(struct device *dev)
 	struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev));
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct pci_dev *pdev = to_pci_dev(dev);
+	struct e1000_hw *hw = &adapter->hw;
+	u16 phy_data;
 	int rc;
 
+	if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID &&
+	    hw->mac.type >= e1000_pch_adp) {
+		/* Mask OEM Bits / Gig Disable / Restart AN (772_26[12] = 1) */
+		e1e_rphy(hw, I217_MEMPWR, &phy_data);
+		phy_data |= I217_MEMPWR_MOEM;
+		e1e_wphy(hw, I217_MEMPWR, phy_data);
+
+		/* Disable LCD reset */
+		hw->phy.reset_disable = true;
+	}
+
 	e10