diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2010-05-21 07:19:18 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2010-05-21 07:19:18 -0700 |
| commit | 33cf23b0a535475aead57707cb9f4fe135a93544 (patch) | |
| tree | 67e14f77f0eeab847a26a6cbfcb44eecb5fa2fda /drivers/scsi/lpfc/lpfc_attr.c | |
| parent | 7a9b149212f3716c598afe973b6261fd58453b7a (diff) | |
| parent | 95bb335c0ebe96afe926387a1ef3a096bd884a82 (diff) | |
| download | linux-33cf23b0a535475aead57707cb9f4fe135a93544.tar.gz linux-33cf23b0a535475aead57707cb9f4fe135a93544.tar.bz2 linux-33cf23b0a535475aead57707cb9f4fe135a93544.zip | |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (182 commits)
[SCSI] aacraid: add an ifdef'd device delete case instead of taking the device offline
[SCSI] aacraid: prohibit access to array container space
[SCSI] aacraid: add support for handling ATA pass-through commands.
[SCSI] aacraid: expose physical devices for models with newer firmware
[SCSI] aacraid: respond automatically to volumes added by config tool
[SCSI] fcoe: fix fcoe module ref counting
[SCSI] libfcoe: FIP Keep-Alive messages for VPorts are sent with incorrect port_id and wwn
[SCSI] libfcoe: Fix incorrect MAC address clearing
[SCSI] fcoe: fix a circular locking issue with rtnl and sysfs mutex
[SCSI] libfc: Move the port_id into lport
[SCSI] fcoe: move link speed checking into its own routine
[SCSI] libfc: Remove extra pointer check
[SCSI] libfc: Remove unused fc_get_host_port_type
[SCSI] fcoe: fixes wrong error exit in fcoe_create
[SCSI] libfc: set seq_id for incoming sequence
[SCSI] qla2xxx: Updates to ISP82xx support.
[SCSI] qla2xxx: Optionally disable target reset.
[SCSI] qla2xxx: ensure flash operation and host reset via sg_reset are mutually exclusive
[SCSI] qla2xxx: Silence bogus warning by gcc for wrap and did.
[SCSI] qla2xxx: T10 DIF support added.
...
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_attr.c')
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_attr.c | 20 |
1 files changed, 13 insertions, 7 deletions
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 1849e33e68f9..2e5f376d9ccc 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -869,6 +869,7 @@ lpfc_get_hba_info(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq; MAILBOX_t *pmb; int rc = 0; + uint32_t max_vpi; /* * prevent udev from issuing mailbox commands until the port is @@ -916,11 +917,17 @@ lpfc_get_hba_info(struct lpfc_hba *phba, if (axri) *axri = bf_get(lpfc_mbx_rd_conf_xri_count, rd_config) - phba->sli4_hba.max_cfg_param.xri_used; + + /* Account for differences with SLI-3. Get vpi count from + * mailbox data and subtract one for max vpi value. + */ + max_vpi = (bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config) > 0) ? + (bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config) - 1) : 0; + if (mvpi) - *mvpi = bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config); + *mvpi = max_vpi; if (avpi) - *avpi = bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config) - - phba->sli4_hba.max_cfg_param.vpi_used; + *avpi = max_vpi - phba->sli4_hba.max_cfg_param.vpi_used; } else { if (mrpi) *mrpi = pmb->un.varRdConfig.max_rpi; @@ -1925,13 +1932,12 @@ MODULE_PARM_DESC(lpfc_sli_mode, "SLI mode selector:" " 2 - select SLI-2 even on SLI-3 capable HBAs," " 3 - select SLI-3"); -int lpfc_enable_npiv = 0; +int lpfc_enable_npiv = 1; module_param(lpfc_enable_npiv, int, 0); MODULE_PARM_DESC(lpfc_enable_npiv, "Enable NPIV functionality"); lpfc_param_show(enable_npiv); -lpfc_param_init(enable_npiv, 0, 0, 1); -static DEVICE_ATTR(lpfc_enable_npiv, S_IRUGO, - lpfc_enable_npiv_show, NULL); +lpfc_param_init(enable_npiv, 1, 0, 1); +static DEVICE_ATTR(lpfc_enable_npiv, S_IRUGO, lpfc_enable_npiv_show, NULL); /* # lpfc_suppress_link_up: Bring link up at initialization |